Ha-VIS eCon 3000 Fast Ethernet Basic PoE / PoE+ 5 to 8 Ethernet ports RJ45, FOC, and PoE / PoE+ English Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control cabinets Commercial temp.: 0C ... +55C / Industrial temp.: -40C ... +70C Energy Efficient Ethernet Energy supply of up to 4 terminal devices via PoE+ (137 watts) in accordance with IEEE 802.3at Fast Ethernet Non-Blocking Switch architecture in accordance with IEEE 802.3 Variants with industrial temperature range of -40C ... +70C Surge protection and reverse polarity protection Minimum energy consumption due to energy-efficient Ethernet Optimised DIN rail bracket Target markets Machinery & Robotics Automation Industrial network infrastructures Wind Energy, Solar Energy Transportation Shipbuilding General Description The Ha-VIS eCon 3000 Fast Ethernet PoE family of unmanaged Ethernet switches is equipped with up to 8 Fast Ethernet ports and allow for cost-efficient and quick expansion and/or reconstruction of network infrastructures. The switches work as power sourcing equipment (PSE) and are capable of simultaneously providing the full PoE output of 34.2 watts on up to four ports. The slender design of the switches enables an extremely high packing density on the DIN rail. The selection includes various combinations of variants with RJ45 and fibre optic ports. Automatic detection of the transmission rate (auto-negotiation) and of the wiring of the twisted pair data cable (auto-polarity and auto-MDI(X)) allow for simple plug & play. All variants are available with the temperature ranges "Industrial" and "Commercial". Specification Switch Features Ethernet ports 10BASE-Te / 100BASE-TX Housing width 25 mm Type of connection RJ45 Number of ports 5, 6, 7, 8 Auto-negotiation Yes Yes Switching technology Store and Forward Auto-polarity Supported standards IEEE 802.3 Frame size Auto-MDI(X) 1522 bytes MAC table size Transfer conditions 1k entries Transfer speed 10 / 100 Mbit/s Transfer length 100 m (Twisted Pair, Cat 5) Packet buffer size 448 kbit Non-blocking Yes Quality of Service Yes Energy-efficient Ethernet Yes PROFINET-compatible Yes EthernetIP-compatible Yes Yes Twisted pair Ethernet ports 100BASE-FX Type of fibre Multi-mode (MM) Type of connection Transfer conditions FOC Wavelength Power supply Nominal voltage 24 VDC Permissible voltage range 48 VDC 9 VDC ... 60 VDC Surge protection Yes Reverse polarity proof Yes Starting current 3.20 A Overcurrent protection at input Max. power consumption @ 24 VDC Conductor cross-section Type of connection Pinout 54 VDC 6.40 A Output power Input sensitivity 7.20 A Yes (12 A) 1.92 W ... 3.12 W 0.08 mm ... 2.5 mm (28 AWG ... 12 AWG) 3-pole, pluggable screwed contact +/-/ Supply circuit (according to 60950) SELV (circuit breaker 10 A) Service hotline: +49 5772 47-97100, Fax: +49 5772 47-495 Electric@HARTING.com, www.HARTING.com 100 Mbit/s 2 km 15 km -20 dBm ... -14 dBm -15 dBm ... -8 dBm -30 dBm -32 dBm Ambient conditions Commercial temperature range Industrial temperature range Storage temperature range 0C ... +55C -40C ... +70C -40C ... +85C Relative humidity (operation) 0% ... 95% (non-condensing) Relative humidity (storage and transport) 0% ... 95% (non-condensing) Air pressure HARTING Technologiegruppe P.O.Box 1473, D-32325 Espelkamp Wilhelm-Harting-Strae 1, D-32325 Espelkamp, Germany 1310 nm Transfer speed Transfer length Single-mode (SM) SC Duplex 2000 m (795 hPa) Note: We reserve the right to make technical changes to the products and to the content of this document at any time without prior notification. The HARTING Technologiegruppe does not accept any responsibility for possible errors or incompletions in this document. We reserve all the rights to this document and the topics and illustrations contained within it. Copying, disclosure to third parties or use of its content - even partially - is forbidden without the prior written consent of the HARTING Technologiegruppe. Housing PoE Number of PoE ports 4 Standard IEEE 802.3af / IEEE 802.3at PoE type PSE Supported mode Alternative A Power supply PSE 54 VDC 48 VDC Maximum power consumption PSE 1380 mA PoE pinout 375 mA 638 mA 34.2 W per port 136.8 W total Protection class (with plugged screwed contact) Alternative A, MDI-X (1/2 = V-, 3/6 = V+) Status and diagnostic displays Power ("Pwr") 480 g ... 508 g 15.4 W per port 61.6 W total See 802.3at, section 33.1.4 illuminated green Supply voltage is applied Link/Activity ("L/A") off No link Link/Activity ("L/A") illuminated green Link/Activity ("L/A") flashes green Link is active Link is active and data is transferred Link speed ("Spd") off 10 Mbit/s Link speed ("Spd") illuminated yellow 100 Mbit/s 142 mm x 25 mm x 107.5 mm Type of installation Material hoods/housings Supported cabling 25 mm Weight 2380 mA Maximum current (PoE / PoE+) Maximum output power PSE Housing width Dimensions H x W x D (without pluggable screwed contact and holding bracket) 35 mm DIN rail acc. to EN 60 715 Anodised aluminium / powder-coated steel sheet IP30 Protection class III Approvals (in preparation) CE (FCC CFR 47 Part 15, cUL US 508 listed, DNV, GL, ABS, NK) EMC and environmental conditions EMC interference immunity (EN 61000-6-1, 61 000-6-2 55024) Electrostatic discharge (ESD) EN 61 000-4-2 Electromagnetic field EN 61 000-4-3 Rapid transients (burst) EN 61 000-4-4 Surge voltages EN 61 000-4-5 Conducted interference voltages EN 61 000-4-6 EMC interference emission (EN 61000-6-4, EN 55 022, FCC CFR 47 Part 15) PoE status off PoE status illuminated green Voltage in PoE range PoE status illuminated blue Voltage in PoE+ range PoE status illuminated red Fault PoE is inactive / low voltage Mechanical stability (EN 60721-3) IEC 60068-2-6 Vibration IEC 60068-2-6 Resonance search IEC 60068-2-27 Shock test Scope of delivery Pluggable screwed contact for power supply Installation instructions Drawings Specifications / order information Ports / order information Power consumption @ 24 VDC without PoE Commercial temp.: 0C ... +55C SC Housing width - 1x MM (2 km) 25 mm 110 mA 1.19 - 1x SM (15 km) 25 mm 110 mA 1.19 4 - 2x MM (2 km) 25 mm 130 mA 4 - 2x SM (15 km) 25 mm 6 - - 6 - 6 8 RJ45 SFP 4 4 MTBF in million h Switch Industrial temp.: -40C ... +70C Order no. Switch Order no. Ha-VIS eCon 3041B-AD-P 24030041130 Ha-VIS eCon 3041BT-AD-P 24030041120 Ha-VIS eCon 3041B-AF-P 24030041230 Ha-VIS eCon 3041BT-AF-P 24030041220 1.17 Ha-VIS eCon 3042B-AD-P 24030042130 Ha-VIS eCon 3042BT-AD-P 24030042120 130 mA 1.17 Ha-VIS eCon 3042B-AF-P 24030042230 Ha-VIS eCon 3042BT-AF-P 24030042220 25 mm 80 mA 1.18 Ha-VIS eCon 3060B-A-P 24030060030 Ha-VIS eCon 3060BT-A-P 24030060020 1x MM (2 km) 25 mm 120 mA 1.15 Ha-VIS eCon 3061B-AD-P 24030061130 Ha-VIS eCon 3061BT-AD-P 24030061120 - 1x SM (15 km) 25 mm 120 mA 1.15 Ha-VIS eCon 3061B-AF-P 24030061230 Ha-VIS eCon 3061BT-AF-P 24030061220 - - 25 mm 90 mA 1.14 Ha-VIS eCon 3080B-A-P 24030080030 Ha-VIS eCon 3080BT-A-P 24030080020 Copyright (c) 2014 HARTING Technologie All rights reserved Date of issue 04.2014 Doc No 24030000020/98