English
General Description
Specifi cation
Switch Features
Housing width 25 mm
Number of ports 5, 6, 7, 8
Switching technology Store and Forward
Supported standards IEEE 802.3
Frame size 1522 bytes
MAC table size 1k entries
Packet bu er size 448 kbit
Non-blocking Yes
Quality of Service Yes
Energy-effi cient Ethernet Yes
PROFINET-compatible Yes
EthernetIP-compatible Yes
Ethernet ports 10BASE-Te / 100BASE-TX
Type of connection RJ45
Auto-negotiation Yes
Auto-polarity Yes
Auto-MDI(X) Yes
Transfer conditions Twisted pair
Transfer speed 10 / 100 Mbit/s
Transfer length 100 m (Twisted Pair, Cat 5)
Ethernet ports 100BASE-FX
Type of fi bre Multi-mode (MM) Single-mode (SM)
Type of connection SC Duplex
Transfer conditions FOC
Wavelength 1310 nm
Transfer speed 100 Mbit/s
Transfer length 2 km 15 km
Output power -20 dBm ... -14 dBm -15 dBm ... -8 dBm
Input sensitivity ≤ -30 dBm ≤ -32 dBm
Power supply
Nominal voltage 24 VDC 48 VDC 54 VDC
Permissible voltage range 9 VDC ... 60 VDC
Surge protection Yes
Reverse polarity proof Yes
Starting current 3.20 A 6.40 A 7.20 A
Overcurrent protection at input Yes (12 A)
Max. power consumption @ 24 VDC 1.92 W ... 3.12 W
Conductor cross-section 0.08 mm² ... 2.5 mm² (28 AWG ... 12 AWG)
Type of connection 3-pole, pluggable screwed contact
Pinout + / - /
Supply circuit (according to 60950) SELV (circuit breaker 10 A)
The Ha-VIS eCon 3000 Fast Ethernet PoE family of unmanaged Ethernet
switches is equipped with up to 8 Fast Ethernet ports and allow for
cost-effi cient and quick expansion and/or reconstruction of network
infrastructures. The switches work as power sourcing equipment (PSE)
and are capable of simultaneously providing the full PoE output of
34.2 watts on up to four ports. The slender design of the switches enables
an extremely high packing density on the DIN rail. The selection includes
various combinations of variants with RJ45 and bre optic ports. Automatic
detection of the transmission rate (auto-negotiation) and of the wiring
of the twisted pair data cable (auto-polarity and auto-MDI(X)) allow for
simple plug & play. All variants are available with the temperature ranges
"Industrial" and "Commercial".
■ Energy supply of up to 4 terminal devices via PoE+ (137 watts) in
accordance with IEEE 802.3at
■ Fast Ethernet Non-Blocking Switch architecture in accordance with IEEE 802.3
■ Variants with industrial temperature range of -40°C ... +70°C
■ Surge protection and reverse polarity protection
■ Minimum energy consumption due to energy-effi cient Ethernet
■ Optimised DIN rail bracket
5 to 8 Ethernet ports RJ45, FOC, and PoE / PoE+
Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control
cabinets
Commercial temp.: 0°C ... +55°C / Industrial temp.: -40°C ... +70°C
HARTING Technologiegruppe
P.O.Box 1473, D-32325 Espelkamp
Wilhelm-Harting-Straße 1, D-32325 Espelkamp, Germany
Service hotline: +49 5772 47-97100, Fax: +49 5772 47-495
Electric@HARTING.com, www.HARTING.com
Note: We reserve the right to make technical changes to the products and to the content of this
document at any time without prior noti cation. The HARTING Technologiegruppe does not ac-
cept any responsibility for possible errors or incompletions in this document. We reserve all the
rights to this document and the topics and illustrations contained within it. Copying, disclosure to
third parties or use of its content - even partially - is forbidden without the prior written consent
of the HARTING Technologiegruppe.
Ha-VIS eCon 3000 Fast Ethernet Basic PoE / PoE+
Energy
Efficient
Ethernet
Ambient conditions
Commercial temperature range 0°C ... +55°C
Industrial temperature range -40°C ... +70°C
Storage temperature range -40°C ... +85°C
Relative humidity (operation) 0% ... 95% (non-condensing)
Relative humidity (storage and
transport) 0% ... 95% (non-condensing)
Air pressure 2000 m (795 hPa)
Target markets
Machinery & Robotics Automation Industrial network
infrastructures
Wind Energy,
Solar Energy Transportation Shipbuilding
Drawings
Specications / order information
Approvals (in preparation)
CE (FCC CFR 47 Part 15, cUL US 508 listed, DNV, GL, ABS, NK)
EMC and environmental conditions
EMC interference immunity (EN 61000-6-1, 61 000-6-2 55024)
Electrostatic discharge (ESD) EN 61 000-4-2
Electromagnetic eld EN 61 000-4-3
Rapid transients (burst) EN 61 000-4-4
Surge voltages EN 61 000-4-5
Conducted interference voltages EN 61 000-4-6
EMC interference emission (EN 61000-6-4, EN 55 022, FCC CFR 47 Part 15)
Mechanical stability (EN 60721-3)
IEC 60068-2-6 Vibration
IEC 60068-2-6 Resonance search
IEC 60068-2-27 Shock test
Scope of delivery
■ Pluggable screwed contact for power supply
■ Installation instructions
Housing
Housing width 25 mm
Dimensions H x W x D (without
pluggable screwed contact and
holding bracket)
142 mm x 25 mm x 107.5 mm
Weight 480 g ... 508 g
Type of installation 35 mm DIN rail acc. to EN 60 715
Material hoods/housings Anodised aluminium / powder-coated
steel sheet
Protection class (with plugged
screwed contact) IP30
Protection class III
Status and diagnostic displays
Power ("Pwr") illuminated green Supply voltage is applied
Link/Activity ("L/A") o No link
Link/Activity ("L/A") illuminated green Link is active
Link/Activity ("L/A") ashes green Link is active and data is transferred
Link speed ("Spd") o 10 Mbit/s
Link speed ("Spd") illuminated yellow 100 Mbit/s
PoE status o PoE is inactive / low voltage
PoE status illuminated green Voltage in PoE range
PoE status illuminated blue Voltage in PoE+ range
PoE status illuminated red Fault
Date of issue 04.2014
Doc No 24030000020/98
Copyright© 2014
HARTING Technologie
All rights reserved
Ports / order information
Power consump-
tion @ 24 VDC
without PoE
Commercial temp.: 0°C ... +55°C Industrial temp.: -40°C ... +70°C
RJ45 SFP SC Housing
width
MTBF
in million h Switch Order no. Switch Order no.
4 - 1x MM (2 km) 25 mm 110 mA 1.19 Ha-VIS eCon 3041B-AD-P 24030041130 Ha-VIS eCon 3041BT-AD-P 24030041120
4 - 1x SM (15 km) 25 mm 110 mA 1.19 Ha-VIS eCon 3041B-AF-P 24030041230 Ha-VIS eCon 3041BT-AF-P 24030041220
4 - 2x MM (2 km) 25 mm 130 mA 1.17 Ha-VIS eCon 3042B-AD-P 24030042130 Ha-VIS eCon 3042BT-AD-P 24030042120
4 - 2x SM (15 km) 25 mm 130 mA 1.17 Ha-VIS eCon 3042B-AF-P 24030042230 Ha-VIS eCon 3042BT-AF-P 24030042220
6 - - 25 mm 80 mA 1.18 Ha-VIS eCon 3060B-A-P 24030060030 Ha-VIS eCon 3060BT-A-P 24030060020
6 - 1x MM (2 km) 25 mm 120 mA 1.15 Ha-VIS eCon 3061B-AD-P 24030061130 Ha-VIS eCon 3061BT-AD-P 24030061120
6 - 1x SM (15 km) 25 mm 120 mA 1.15 Ha-VIS eCon 3061B-AF-P 24030061230 Ha-VIS eCon 3061BT-AF-P 24030061220
8 - - 25 mm 90 mA 1.14 Ha-VIS eCon 3080B-A-P 24030080030 Ha-VIS eCon 3080BT-A-P 24030080020
PoE
Number of PoE ports 4
Standard IEEE 802.3af / IEEE 802.3at
PoE type PSE
Supported mode Alternative A
Power supply PSE 48 VDC 54 VDC
Maximum power consumption
PSE 1380 mA 2380 mA
Maximum current (PoE / PoE+) 375 mA 638 mA
Maximum output power PSE 15.4 W per port
61.6 W total
34.2 W per port
136.8 W total
Supported cabling See 802.3at, section 33.1.4
PoE pinout Alternative A, MDI-X (1/2 = V-, 3/6 = V+)
