VNP35N07-E, VNB35N07-E, VNV35N07-E OMNIFET: fully autoprotected Power MOSFET Datasheet - production data * Diagnostic feedback through input pin * ESD protection 3 1 * Direct access to the gate of the Power MOSFET (analog driving) 3 1 2 * Compatible with standard Power MOSFET D2PAK TO-220 * Standard TO-220 package * Compliant with 2002/95/EC European directive 10 Description 1 PowerSO-10 The VNP35N07-E, VNB35N07-E and VNV35N07-E are monolithic devices made using STMicroelectronics VIPower(R) technology, intended for replacement of standard Power MOSFETs in DC to 50 KHz applications. Features Built-in thermal shutdown, linear current limitation and overvoltage clamp protect the chip in harsh environments. Type Vclamp RDS(on) Ilim VNP35N07-E 70 V 0.028 35 A VNB35N07-E 70 V 0.028 35 A VNV35N07-E 70 V 0.028 35 A Fault feedback can be detected by monitoring the voltage at the input pin. * Automotive qualified * Linear current limitation * Thermal shutdown * Short circuit protection * Integrated clamp * Low current drawn from input pin Table 1. Device summary Order codes Package Tube Tape and reel TO-220 VNP35N07-E VNP35N07TR-E D2 VNB35N07-E VNB35N07TR-E VNV35N07-E VNV35N07TR-E PAK PowerSO-10 February 2015 This is information on a product in full production. DocID023779 Rev 3 1/24 www.st.com Contents VNP35N07-E, VNB35N07-E, VNV35N07-E Contents 1 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 Electrical specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1 Absolute maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Protection features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5 2/24 4.1 TO-220 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4.2 D2PAK package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4.3 PowerSO-10 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 DocID023779 Rev 3 VNP35N07-E, VNB35N07-E, VNV35N07-E List of tables List of tables Table 1. Table 2. Table 3. Table 4. Table 5. Table 6. Table 7. Table 8. Table 9. Table 10. Table 11. Table 12. Table 13. Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Dynamic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Source drain diode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 TO-220 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 D2PAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PowerSO-10 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 DocID023779 Rev 3 3/24 3 List of figures VNP35N07-E, VNB35N07-E, VNV35N07-E List of figures Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Figure 17. Figure 18. Figure 19. Figure 20. Figure 21. Figure 22. Figure 23. Figure 24. Figure 25. Figure 26. Figure 27. Figure 28. Figure 29. Figure 30. Figure 31. Figure 32. Figure 33. 4/24 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Switching times test circuits for resistive load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Input charge test circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Unclamped inductive load test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Test circuit for inductive load switching & diode recovery times . . . . . . . . . . . . . . . . . . . . . 10 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Unclamped inductive waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Thermal impedance for TO-220 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Derating curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Static drain-source on resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Static drain-source on resistance vs input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Output characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Transconductance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Static drain-source on resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Input charge vs input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Normalized on resistance vs temperature (part 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Normalized on resistance vs temperature (part 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Normalized input threshold voltage vs temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Capacitance variations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Turn-on current slope (part 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Turn-on current slope (part 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Turn-off drain-source voltage slope (part 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Turn-off drain-source voltage slope (part 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Switching time resistive load (part 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Switching time resistive load (part 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Current limit vs junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Source drain diode forward characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Switching time resistive load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Step response current Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Thermal impedance for D2PAK/ PowerSO-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 TO-220 package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 D2PAK package dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 PowerSO-10 package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 DocID023779 Rev 3 VNP35N07-E, VNB35N07-E, VNV35N07-E 1 Block diagram Block diagram Figure 1. Block diagram 1. PowerSO-10 pin configuration: INPUT = 6, 7, 8, 9, 10; SOURCE = 1, 2, 4, 5; DRAIN = TAB. DocID023779 Rev 3 5/24 23 Electrical specification VNP35N07-E, VNB35N07-E, VNV35N07-E 2 Electrical specification 2.1 Absolute maximum rating Stressing the device above the rating listed in Table 3 may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the operating sections of this specification is not implied. Exposure to the conditions in table below for extended periods may affect device reliability. Table 2. Absolute maximum ratings Value Symbol VDS D2PAK PowerSO-10 Drain-source voltage (Vin = 0) Unit TO-220 Internally clamped V Vin Input voltage 18 V ID Drain current Internally limited A IR Reverse DC output current -50 A 2000 V Vesd Electrostatic Discharge (C = 100 pF; R = 1.5 K) Ptot Total dissipation at TC = 25C 125 40 W Tj Operating junction temperature Internally limited C Tc Case operating temperature Internally limited C -55 to 150 C Tstg 2.2 Parameter Storage temperature Thermal data Table 3. Thermal data Value Symbol 6/24 Parameter Unit PowerSO-10 D2PAK TO-220 Rthj-case Thermal Resistance Junction-case (max) 1 1 3.12 C/W Rthj-amb Thermal Resistance Junction-ambient (max) 50 62.5 62.5 C/W DocID023779 Rev 3 VNP35N07-E, VNB35N07-E, VNV35N07-E 2.3 Electrical specification Electrical characteristics Tcase = 25C unless otherwise specified. Table 4. Off Symbol Parameter Test Conditions Min Typ Max Unit 70 80 V Drain-source clamp voltage ID = 200 mA; Vin = 0 V 60 VCLTH Drain-source clamp threshold voltage ID = 2 mA; Vin = 0 V 55 VINCL Input-source reverse clamp voltage Iin = -1 mA -1 IDSS Zero input voltage drain current (Vin = 0 V) IISS Supply current from input pin VDS = 0 V; Vin = 10 V VCLAMP V -0.3 V VDS = 13 V; Vin = 0 V 50 mA VDS = 25 V; Vin = 0 V 200 A 500 A 250 Table 5. On Symbol Parameter Test Conditions Min Typ Max Unit VIN(th)(1) Input threshold voltage VDS = Vin; ID+Iin = 1 mA 0.8 -- 3 V RDS(on)(1) Static drain-source on resistance Vin = 10 V; ID = 18 A -- 0.028 Vin = 5 V; ID = 18 A -- 0.035 1. Pulsed: Pulse duration = 300 ms, duty cycle 1.5%. Table 6. Dynamic Symbol Parameter Test Conditions gfs(1) Forward transconductance VDS = 13 V; ID = 18 A COSS Output capacitance VDS = 13 V; f = 1 MHz; Vin = 0 V Min Typ 20 25 Max Unit S 980 1400 pF Min Typ Max Unit -- 100 200 ns -- 350 600 ns -- 650 1000 ns Fall time -- 200 350 ns Turn-on delay time -- 500 800 s -- 2.7 4.2 s -- 10 16 s -- 4.3 6.5 s 1. Pulsed: Pulse duration = 300 ms, duty cycle 1.5%. Table 7. Switching Symbol td(on)(1) tr(1) td(off)(1) tf(1) td(on) (1) tr(1) td(off)(1) tf(1) Parameter Test Conditions Turn-on delay time Rise time Turn-off delay time Rise time Turn-off delay time VDD = 28 V; Id = 18 A; Vgen = 10 V; Rgen = 10 (see Figure 2) VDD = 28 V; Id = 18 A; Vgen = 10 V; Rgen = 1000 (see Figure 2) Fall time DocID023779 Rev 3 7/24 23 Electrical specification VNP35N07-E, VNB35N07-E, VNV35N07-E Table 7. Switching (continued) Symbol Parameter (di/dt)on(1) Turn-on current slope Qi(1) Total input charge Test Conditions Min Typ Max Unit VDD = 28 V; ID = 18 A; Vin = 10 V; Rgen = 10 -- 60 A/s VDD = 12 V; ID = 18 A; Vin = 10 V -- 100 nC 1. Parameters guaranteed by design/characterization. Table 8. Source drain diode Symbol VSD(1) trr (2) Qrr (2) IRRM(2) Parameter Test Conditions Forward on voltage ISD = 18 A; Vin = 0 V Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 18 A; di/dt = 100 A/s; VDD = 30 V; TJ = 25 C (see Figure 5) Min Typ -- Max Unit 1.6 V -- 250 ns -- 1 C -- 8 A 1. Pulsed: Pulse duration = 300 ms, duty cycle 1.5%. 2. Parameters guaranteed by design/characterization. Table 9. Protection Symbol Ilim Parameter Test Conditions Drain current limit Min Typ Max Unit VIN = 10 V; VDS = 13 V 25 35 45 A VIN = 5 V; VDS = 13 V 25 35 45 A Vin = 10 V 35 60 s Vin = 5 V 70 140 s tdlim(1) Step response current limit Tjsh (1) Overtemperature shutdown 150 C Tjrs(1) Overtemperature reset 135 C Igf (1) Fault sink current Eas(1) Single pulse avalanche energy VIN = 10 V; VDS = 13 V 50 mA VIN = 5 V; VDS = 13 V 20 mA Starting Tj = 25 C; VDD = 20 V; Vin = 10 V; Rgen = 1 K; L = 10 mH 1. Parameters guaranteed by design/characterization. 8/24 DocID023779 Rev 3 2.5 J VNP35N07-E, VNB35N07-E, VNV35N07-E Electrical specification Figure 2. Switching times test circuits for resistive load Figure 3. Input charge test circuit DocID023779 Rev 3 9/24 23 Electrical specification VNP35N07-E, VNB35N07-E, VNV35N07-E Figure 4. Unclamped inductive load test circuits Figure 5. Test circuit for inductive load switching & diode recovery times 10/24 DocID023779 Rev 3 VNP35N07-E, VNB35N07-E, VNV35N07-E Electrical specification Figure 6. Waveforms Figure 7. Unclamped inductive waveforms DocID023779 Rev 3 11/24 23 Electrical specification 12/24 VNP35N07-E, VNB35N07-E, VNV35N07-E Figure 8. Thermal impedance for TO-220 Figure 9. Derating curve Figure 10. Static drain-source on resistance Figure 11. Static drain-source on resistance vs input voltage Figure 12. Output characteristics Figure 13. Transconductance DocID023779 Rev 3 VNP35N07-E, VNB35N07-E, VNV35N07-E Electrical specification Figure 14. Static drain-source on resistance Figure 15. Input charge vs input voltage Figure 16. Normalized on resistance vs temperature (part 1) Figure 17. Normalized on resistance vs temperature (part 2) Figure 18. Normalized input threshold voltage vs temperature Figure 19. Capacitance variations DocID023779 Rev 3 13/24 23 Electrical specification 14/24 VNP35N07-E, VNB35N07-E, VNV35N07-E Figure 20. Turn-on current slope (part 1) Figure 21. Turn-on current slope (part 2) Figure 22. Turn-off drain-source voltage slope (part 1) Figure 23. Turn-off drain-source voltage slope (part 2) Figure 24. Switching time resistive load (part 1) Figure 25. Switching time resistive load (part 2) DocID023779 Rev 3 VNP35N07-E, VNB35N07-E, VNV35N07-E Electrical specification Figure 26. Current limit vs junction temperature Figure 27. Source drain diode forward characteristics Figure 28. Switching time resistive load Figure 29. Step response current Limit Figure 30. Thermal impedance for D2PAK/ PowerSO-10 DocID023779 Rev 3 15/24 23 Protection features 3 VNP35N07-E, VNB35N07-E, VNV35N07-E Protection features During normal operation, the Input pin is electrically connected to the gate of the internal power MOSFET. The device then behaves like a standard power MOSFET and can be used as a switch from DC to 50 KHz. The only difference from the user`s standpoint is that a small DC current (Iiss) flows into the Input pin in order to supply the internal circuitry. The device integrates: * Overvoltage Clamp Protection: internally set at 70V, along with the rugged avalanche characteristics of the Power MOSFET stage give this device unrivalled ruggedness and energy handling capability. This feature is mainly important when driving inductive loads. * Linear Current Limiter Circuit: limits the drain current Id to Ilim whatever the Input pin voltage. When the current limiter is active, the device operates in the linear region, so power dissipation may exceed the capability of the heatsink. Both case and junction temperatures increase, and if this phase lasts long enough, junction temperature may reach the overtemperature threshold Tjsh. * Overtemperature and Short Circuit Protection: these are based on sensing the chip temperature and are not dependent on the input voltage. The location of the sensing element on the chip in the power stage area ensures fast, accurate detection of the junction temperature. Overtemperature cutout occurs at minimum 150C. The device is automatically restarted when the chip temperature falls below 135C. * Status Feedback: in the case of an overtemperature fault condition, a Status Feedback is provided through the input pin. The internal protection circuit disconnects the input from the gate and connects it instead to ground via an equivalent resistance of 100 . The failure can be detected by monitoring the voltage at the Input pin, which will be close to ground potential. Additional features of this devices are ESD protection according to the Human Body model and the ability to be driven from a TTL Logic circuit (with a small increase in RDS(on)). 16/24 DocID023779 Rev 3 VNP35N07-E, VNB35N07-E, VNV35N07-E 4 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 4.1 TO-220 package information Table 10. TO-220 mechanical data mm. Dim. Min. Typ Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 P 3.75 3.85 Q 2.65 2.95 Package weight 1.9Gr. (Typ.) DocID023779 Rev 3 17/24 23 Package information VNP35N07-E, VNB35N07-E, VNV35N07-E Figure 31. TO-220 package dimensions ("1($'5 18/24 DocID023779 Rev 3 VNP35N07-E, VNB35N07-E, VNV35N07-E 4.2 Package information D2PAK package information Table 11. D2PAK mechanical data mm. Dim. Min. Typ Max. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 7.75 8.00 D2 1.10 1.30 1.50 E 10 E1 8.50 8.70 8.90 E2 6.85 7.05 7.25 e 10.40 2.54 e1 4.88 5.28 H 15 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 0.4 0 DocID023779 Rev 3 8 19/24 23 Package information VNP35N07-E, VNB35N07-E, VNV35N07-E Figure 32. D2PAK package dimensions ("1($'5 20/24 DocID023779 Rev 3 VNP35N07-E, VNB35N07-E, VNV35N07-E 4.3 Package information PowerSO-10 mechanical data Table 12. PowerSO-10 mechanical data mm. Dim. Min. Typ. A Max. 3.70 A1 0.00 0.10 A2 3.40 3.60 A3 1.25 1.35 b 0.40 0.53 c 0.35 0.55 D 9.40 9.60 D1(1) 7.40 7.60 E 13.80 14.40 E1(1) 9.30 9.50 E2 7.20 7.60 E3 5.90 6.10 e 1.27 L 0.95 1.65 < 0 8 1. Resin protrusion not included (max value: 0.20 mm per side) DocID023779 Rev 3 21/24 23 Package information VNP35N07-E, VNB35N07-E, VNV35N07-E Figure 33. PowerSO-10 package dimensions '!0'#&4 22/24 DocID023779 Rev 3 VNP35N07-E, VNB35N07-E, VNV35N07-E 5 Revision history Revision history Table 13. Document revision history Date Revision Changes 09-Jan-2014 1 Initial release. 07-May-2014 2 Added D2PAK package and related details. Table 2: Absolute maximum ratings: - Ptot: updated value Table 3: Thermal data: - Rthj-case: updated value 02-Feb-2015 3 Added PowerSO-10 package and related details. Updated Chapter 4: Package information DocID023779 Rev 3 23/24 23 VNP35N07-E, VNB35N07-E, VNV35N07-E IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2015 STMicroelectronics - All rights reserved 24/24 DocID023779 Rev 3