Gap Pad 3000S30 (R) Thermally Conductive, Reinforced, Soft "S-Class" Gap Filling Material Features and Benefits TYPICAL PROPERTIES OF GAP PAD 3000S30 PROPERTY Color * Thermal conductivity: 3.0 W/m-K * Low "S-Class" thermal resistance at very low pressures * Highly conformable,"S-Class" softness * Designed for low-stress applications * Fiberglass reinforced for puncture, shear and tear resistance IMPERIAL VALUE Light Blue METRIC VALUE Light Blue TEST METHOD Visual Reinforcement Carrier Fiberglass Fiberglass -- Thickness (inch) / (mm) 0.010 to 0.125 0.254 to 3.175 ASTM D374 Inherent Surface Tack (1- or 2-sided) 2 2 -- Density (g/cc) 3.2 3.2 ASTM D792 Heat Capacity (J/g-K) 1.0 1.0 ASTM E1269 Hardness, Bulk Rubber (Shore 00) (1) 30 30 ASTM D2240 Young's Modulus (psi) / (kPa) (2) 26 180 ASTM D575 Continuous Use Temp (F) / (C) -76 to 392 -60 to 200 -- ELECTRICAL Dielectric Breakdown Voltage (Vac) >3000 >3000 ASTM D149 Dielectric Constant (1000 Hz) 7.0 7.0 ASTM D150 Volume Resistivity (Ohm-meter) 10 9 10 9 ASTM D257 Flame Rating V-O V-O U.L. 94 THERMAL Thermal Conductivity (W/m-K) 3.0 3.0 ASTM D5470 1) Thirty second delay value Shore 00 hardness scale. 2) Young's Modulus, calculated using 0.01 in/min. step rate of strain with a sample size of 0.79 inch2. For more information on Gap Pad modulus, refer to Bergquist Application Note #116. * Processors * Notebook computers * Server S-RAMs * BGA packages * Mass storage drives * Power conversion * Wireline / wireless communications hardware Configurations Available: * Sheet form and die-cut parts available Building a Part Number - 0816 - Standard Options ACME 89302 Rev a Section E 0.020 - 02 Section D - Section C GP3000S30 Section B Gap Pad 3000S30 is offered with natural inherent tack on both sides of the material, eliminating the need for thermally-impeding adhesive layers.The material's natural inherent tack allows for stick-in-place characteristics during assembly. Gap Pad 3000S30 is supplied with protective liners on both sides.The top side has reduced tack for ease of handling. Typical Applications: Section A Gap Pad 3000S30 is a soft gap filling material rated at a thermal conductivity of 3 W/m-K. The material offers exceptional thermal performance at low pressures due to an allnew 3 W/m-K filler package and low-modulus resin formulation. It is reinforced to enhance material handling, puncture, shear and tear resistance. It is well suited for high performance, low-stress applications that typically use fixed standoff or clip mounting. Gap Pad 3000S30 maintains a conformable yet elastic nature that allows for excellent interfacing and wet-out characteristics, even to surfaces with high roughness and/or topography. NA = Selected standard option. If not selecting a standard option, insert company name, drawing number, and revision level. 0816 = Standard sheet size 8" x 16", or 00 = custom configuration 02 = Natural tack, both sides Standard thicknesses available: 0.010", 0.015", 0.020", 0.040", 0.060", 0.080", 0.100", 0.125" GP3000S30 = Gap Pad 3000S30 Material Note: To build a part number, visit our website at www.bergquistcompany.com. Note: Resultant thickness is defined as the final gap thickness of the application. Resultant Thickness (mils) Thickness vs. Thermal Resistance Gap Pad 3000S30 130 110 90 70 50 30 10 0.10 0.30 0.50 0.70 0.90 1.10 1.30 1.50 1.70 Thermal Resistance (C-in2/W) www.bergquistcompany.com The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 The Bergquist Company European Headquarters Bramenberg 9a, 3755 BT Eemnes Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 The Bergquist Company - Asia Room 15, 8/F Wah Wai Industrial Centre No. 38-40, Au Pui Wan Street Fotan, Shatin, N.T. Hong Kong Ph: 852.2690.9296 Fax: 852.2690.2344 Gap Pad (R): U.S. Patent 5,679,457 and others All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_GP_3000S30_12.08 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bergquist Company: GP3000S30-0.010-02-0816-NA