3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ D Sub EMI Junction Shell
50 Position
Physical
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
Junction Shell Kit
Hardware Included: (2) Shell Halves - Die Cast Aluminum Alloy, Clear Chromate
(2) 8 × 32 × 3/8 - Steel, Zinc
(2) Latch - Stainless Steel
(1) Tape Strip
Latch Bracket Kit
Hardware Included: (1) Bracket - Stainless Steel
(2) Screws #4-40 × 7/16 - Steel, Zinc
(6) Flat Washers - Steel, Zinc
(2) Spring Washers - Steel, Zinc
• Cast aluminum shell provides EMI/ESD
protection
• Spring latch allows positive, quick and easy
connect and disconnect
• Strain relief compensates for various round
cable outside diameters
• Nickel plating provides attractive and
corrosion-resistant features
• RoHS* compliant
TS-0245-08
Sheet 1 of 2
Date Modified: January 15, 2007
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ D Sub EMI Junction Shell
50 Position
TS-0245-08
Sheet 2 of 2
.0 .00 .000
inch ±.1 ±.0 1 ± .005
[ ] Dim ensions for Reference
Onl
y
Tolerance Unless Noted
[m m ]
Inch
Note: Maximum Panel Thickness for Latch Bracket is 3/32".
Ordering Information
Latch Bracket
(Order Separately)
3505-62
Junction Shell
3357-9250
3.28
[ 83.3 ]
Latch Bracket
0.42
[ 10.7 ]
0.520
[ 13.21 ]
2.20
[ 55.9 ]
0.75
[ 19.0 ]
0.035
[ 0.89 ]
2.406
[ 61.11 ]
3.37
[ 85.6 ]
Junction Shell
2.0
[ 51.0 ]
0.58
[ 14.7 ]
0.75
[ 19.0 ]
3
Printed in USA.
Minimum 10%
Post-Consumer Fiber
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/electronics © 3M 2007
