SPEC NO: DSAK2806 REV NO: V.2 DATE: MAY/19/2010 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: XULINA ERP: 1304000561
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25° C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type Iv (ucd) [1]
@ 10mA
Min. Typ.
CA25-12SURKWA Hyper Red (AlGaInP) WHITE DIFFUSED 12000 32000 Common Anode
Description
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 650 nm IF=20mA
λD [1] Dominant Wavelength Hyper Red 630 nm IF=20mA
Δλ 1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA
C Capacitance Hyper Red 35 pF VF=0V;f=1MHz
Forward
Voltage
Dig1'8,'Dig2'8',Dig3'8',Dig4'8'
D1,D2,D3,D4,D5,D6,D8 Hyper Red 1.95 2.5 V IF=20mA
D7,L
IR Reverse
Current
Dig1'8,'Dig2'8',Dig3'8',Dig4'8'
D1,D2,D3,D4,D5,D6,D8 Hyper Red
10 uA VR = 5V
D7,L 20
VF [2]
Parameter Hyper Red Units
Power
dissipation
Dig1'8,'Dig2'8',Dig3'8',Dig4'8'
D1,D2,D3,D4,D5,D6,D8 75 mW
D7,L 150
DC Forward
Current
Dig1'8,'Dig2'8',Dig3'8',Dig4'8'
D1,D2,D3,D4,D5,D6,D8 30 mA
D7,L 60
Reverse
Voltage
Dig1'8,'Dig2'8',Dig3'8',Dig4'8'
D1,D2,D3,D4,D5,D6,D8 5
D7,L
Peak Forward
Current [1] Dig1'8,'Dig2'8',Dig3'8',Dig4'8'
D1,D2,D3,D4,D5,D6,D8 185 mA
D7,L 370
Operating/S torage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3~5 Seconds
V