MAX202 5-V DUAL RS-232 LINE DRIVER/RECEIVER WITH 15-kV ESD PROTECTION www.ti.com SLLS576E - JULY 2003 - REVISED APRIL 2007 FEATURES * * * * * * ESD Protection for RS-232 Bus Pins - 15-kV - Human-Body Model Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards Operates at 5-V VCC Supply Operates Up to 120 kbit/s External Capacitors . . . 4 x 0.1 F Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II D, DW, N, OR PW PACKAGE (TOP VIEW) C1+ V+ C1C2+ C2VDOUT2 RIN2 APPLICATIONS * * * * * * 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC GND DOUT1 RIN1 ROUT1 DIN1 DIN2 ROUT2 Battery-Powered Systems PDAs Notebooks Laptops Palmtop PCs Hand-Held Equipment DESCRIPTION/ORDERING INFORMATION The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with 15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The device operates at data signaling rates up to 120 kbit/s and a maximum of 30-V/s driver output slew rate. ORDERING INFORMATION PACKAGE (1) (2) TA PDIP - N SOIC - D 0C to 70C SOIC - DW TSSOP - PW PDIP - N SOIC - D -40C to 85C SOIC - DW TSSOP - PW (1) (2) ORDERABLE PART NUMBER Tube of 25 MAX202CN Tube of 40 MAX202CD Reel of 2500 MAX202CDR Tube of 40 MAX202CDW Reel of 2000 MAX202CDWR Tube of 90 MAX202CPW Reel of 2000 MAX202CPWR Tube of 25 MAX202IN Tube of 40 MAX202ID Reel of 2500 MAX202IDR Tube of 40 MAX202IDW Reel of 2000 MAX202IDWR Tube of 90 MAX202IPW Reel of 2000 MAX202IPWR TOP-SIDE MARKING MAX202CN MAX202C MAX202C MA202C MAX202IN MAX202I MAX202I MB202I Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2003-2007, Texas Instruments Incorporated MAX202 5-V DUAL RS-232 LINE DRIVER/RECEIVER WITH 15-kV ESD PROTECTION www.ti.com SLLS576E - JULY 2003 - REVISED APRIL 2007 Function Tables xxx EACH DRIVER (1) (1) INPUT DIN OUTPUT DOUT L H H L H = high level, L = low level EACH RECEIVER (1) (1) INPUT RIN OUTPUT ROUT L H H L Open H H = high level, L = low level, Open = input disconnected or connected driver off LOGIC DIAGRAM (POSITIVE LOGIC) 11 14 DIN1 DOUT1 10 7 DIN2 DOUT2 12 13 ROUT1 RIN1 9 8 ROUT2 2 RIN2 Submit Documentation Feedback MAX202 5-V DUAL RS-232 LINE DRIVER/RECEIVER WITH 15-kV ESD PROTECTION www.ti.com SLLS576E - JULY 2003 - REVISED APRIL 2007 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) VCC Supply voltage range (2) V+ Positive charge pump voltage range (2) V- Negative charge pump voltage VI Input voltage range VO Output voltage range DOUT Short-circuit duration JA MIN MAX -0.3 6 V VCC - 0.3 14 V -14 0.3 V -0.3 V+ + 0.3 range (2) Drivers 30 Receivers Drivers V - -0.3 V+ + 0.3 -0.3 VCC + 0.3 Receivers D package 73 DW package 57 N package 67 PW package Operating virtual junction temperature Tstg Storage temperature range (1) (2) (3) (4) V V Continuous Package thermal impedance (3) (4) TJ UNIT C/W 108 -65 150 C 150 C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltages are with respect to network GND. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions (1) (see Figure 4) MIN NOM MAX 4.5 5 5.5 Supply voltage VIH Driver high-level input voltage DIN VIL Driver low-level input voltage DIN Driver input voltage DIN VI TA (1) Receiver input voltage MAX202I V 2 V 0.8 0 5.5 -30 30 0 70 -40 85 MAX202C Operating free-air temperature UNIT V V C Test conditions are C1-C4 = 0.1 F at VCC = 5 V 0.5 V. Electrical Characteristics (1) over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 4) PARAMETER ICC (1) (2) Suppy current TEST CONDITIONS No load, VCC = 5 V MIN TYP (2) MAX 8 15 UNIT mA Test conditions are C1-C4 = 0.1 F at VCC = 5 V 0.5 V. All typical values are at VCC = 5 V, and TA = 25C. Submit Documentation Feedback 3 MAX202 5-V DUAL RS-232 LINE DRIVER/RECEIVER WITH 15-kV ESD PROTECTION www.ti.com SLLS576E - JULY 2003 - REVISED APRIL 2007 DRIVER SECTION Electrical Characteristics (1) over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 4) PARAMETER TEST CONDITIONS MIN TYP (2) VOH High-level output voltage DOUT at RL = 3 k to GND, DIN = GND 5 9 VOL Low-level output voltage DOUT at RL = 3 k to GND, DIN = VCC -5 -9 IIH High-level input current VI = VCC IIL Low-level input current VI at 0 V IOS (3) Short-circuit output current VCC = 5.5 V VO = 0 V rO Output resistance VCC, V+, and V- = 0 V VO = 2 V (1) (2) (3) MAX UNIT V V A 15 200 -15 -200 A 10 60 mA 300 Test conditions are C1-C4 = 0.1 F at VCC = 5 V 0.5 V. All typical values are at VCC = 5 V, and TA = 25C. Short-circuit durations should be controlled to prevent exceeding the device absolute power-dissipation ratings, and not more than one output should be shorted at a time. Switching Characteristics (1) over recommended ranges of suply voltage and operating free-air temperature (unless otherwise noted) (see Figure 4) PARAMETER Maximum data rate TEST CONDITIONS CL = 50 to 1000 pF, RL = 3 k to 7 k, One DOUT switching, See Figure 1 tPLH(D) Propagation delay time, low- to high-level output CL = 2500 pF, RL = 3 k, All drivers loaded, See Figure 1 tPHL(D) Propagation delay time, high- to low-level output CL = 2500 pF, RL = 3 k, All drivers loaded, See Figure 1 tsk(p) Pulse skew (3) CL = 150 to 2500 pF, RL = 3 k to 7 k, SR(tr) Slew rate, transition region (see Figure 1) (1) (2) (3) MIN RL = 3 k to 7 k, VCC = 5 V MAX 120 See Figure 2 CL = 50 to 1000 pF, TYP (2) 3 UNIT kbit/s 2 s 2 s 300 ns 6 30 V/s Test conditions are C1-C4 = 0.1 F at VCC = 5 V 0.5 V. All typical values are at VCC = 5 V, and TA = 25C. Pulse skew is defined as |tPLH - tPHL| of each channel of the same device. ESD Protection PIN DOUT, RIN 4 TEST CONDITIONS Human-body model Submit Documentation Feedback TYP UNIT 15 kV MAX202 5-V DUAL RS-232 LINE DRIVER/RECEIVER WITH 15-kV ESD PROTECTION www.ti.com SLLS576E - JULY 2003 - REVISED APRIL 2007 RECEIVER SECTION Electrical Characteristics (1) over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (seeFigure 4) PARAMETER TEST CONDITIONS VOH High-level output voltage IOH = -1 mA VOL Low-level output voltage IOL = 1.6 mA VIT+ Positive-going input threshold voltage VCC = 5 V, TA = 25C VIT- Negative-going input threshold voltage VCC = 5 V, TA = 25C Vhys Input hysteresis (VIT+ - VIT-) ri Input resistance (1) (2) MIN TYP (2) 3.5 VCC - 0.4 1.7 MAX UNIT V 0.4 V 2.4 V 0.8 1.2 0.2 0.5 1 V 3 5 7 k VI = 3 V to 25 V V Test conditions are C1-C4 = 0.1 F at VCC = 5 V 0.5 V. All typical values are at VCC = 5 V, and TA = 25C. Switching Characteristics (1) over recommended ranges of suply voltage and operating free-air temperature (unless otherwise noted) (see Figure 3) PARAMETER TEST CONDITIONS MIN TYP (2) MAX UNIT tPLH(R) Propagation delay time, low- to high-level output CL = 150 pF 0.5 10 s tPHL(R) Propagation delay time, high- to low-level output CL = 150 pF 0.5 10 s tsk(p) (1) (2) (3) Pulse skew (3) 300 ns Test conditions are C1-C4 = 0.1 F at VCC = 5 V 0.5 V. All typical values are at VCC = 5 V, and TA = 25C. Pulse skew is defined as |tPLH - tPHL| of each channel of the same device. Submit Documentation Feedback 5 MAX202 5-V DUAL RS-232 LINE DRIVER/RECEIVER WITH 15-kV ESD PROTECTION www.ti.com SLLS576E - JULY 2003 - REVISED APRIL 2007 PARAMETER MEASUREMENT INFORMATION 3V Input Generator (see Note B) 1.5 V RS-232 Output 50 W RL 1.5 V 0V tPHL (D) CL (see Note A) Output tPLH (D) 3V 3V -3 V -3 V TEST CIRCUIT SR(tf) = 6V tPHL(D) or tPLH(D) VOH VOL VOLTAGE WAVEFORMS NOTES: A. CL includes probe and jig capacitance. B. The pulse generator has the following characteristics: PRR = 120 kbit/s, ZO = 50 W, 50% duty cycle, tr 10 ns, tf 10 ns. Figure 1. Driver Slew Rate 3V Generator (see Note B) RS-232 Output 50 W RL 1.5 V Input 1.5 V 0V CL (see Note A) tPHL (D) tPLH (D) VOH 50% 50% Output VOL TEST CIRCUIT VOLTAGE WAVEFORMS NOTES: A. CL includes probe and jig capacitance. B. The pulse generator has the following characteristics: PRR = 120 kbit/s, ZO = 50 W, 50% duty cycle, tr 10 ns, tf 10 ns. Figure 2. Driver Pulse Skew Input Generator (see Note B) 3V 1.5 V 1.5 V -3 V Output 50 W CL (see Note A) tPHL (R) tPLH (R) VOH 50% Output 50% VOL TEST CIRCUIT VOLTAGE WAVEFORMS NOTES: A. CL includes probe and jig capacitance. B. The pulse generator has the following characteristics: ZO = 50 W, 50% duty cycle, tr 10 ns, tf 10 ns. Figure 3. Receiver Propagation Delay Times 6 Submit Documentation Feedback MAX202 5-V DUAL RS-232 LINE DRIVER/RECEIVER WITH 15-kV ESD PROTECTION www.ti.com SLLS576E - JULY 2003 - REVISED APRIL 2007 APPLICATION INFORMATION 1 C1 + C3 + 0.1 mF, - 0.1 mF 6.3 V - 16 V VCC C1+ 16 + CBYPASS - = 0.1 mF, 2 V+ GND 3 15 14 DOUT1 C1- 13 4 C2 0.1 mF, 16 V 5 kW + - 5 C2- 12 C4 0.1 mF, 16 V DOUT2 RIN2 RIN1 C2+ 6 - 11 V- ROUT1 DIN1 + 7 10 8 9 DIN2 ROUT2 5 kW C3 can be connected to VCC or GND. NOTES: A . Resistor values shown are nominal. B . Nonpolarized ceramic capacitors are acceptable. If polarized tantalum or electrolytic capacitors are used, they should be connected as shown. Figure 4. Typical Operating Circuit and Capacitor Values Capacitor Selection The capacitor type used for C1-C4 is not critical for proper operation. The MAX202 requires 0.1-F capacitors, although capacitors up to 10 F can be used without harm. Ceramic dielectrics are suggested for the 0.1-F capacitors. When using the minimum recommended capacitor values, make sure the capacitance value does not degrade excessively as the operating temperature varies. If in doubt, use capacitors with a larger (e.g., 2x) nominal value. The capacitors' effective series resistance (ESR), which usually rises at low temperatures, influences the amount of ripple on V+ and V-. Use larger capacitors (up to 10 F) to reduce the output impedance at V+ and V-. Bypass VCC to ground with at least 0.1 F. In applications sensitive to power-supply noise generated by the charge pumps, decouple VCC to ground with a capacitor the same size as (or larger than) the charge-pump capacitors (C1-C4). ESD Protection TI MAX202 devices have standard ESD protection structures incorporated on the pins to protect against electrostatic discharges encountered during assembly and handling. In addition, the RS232 bus pins (driver outputs and receiver inputs) of these devices have an extra level of ESD protection. Advanced ESD structures were designed to successfully protect these bus pins against ESD discharge of 15-kV when powered down. Submit Documentation Feedback 7 MAX202 5-V DUAL RS-232 LINE DRIVER/RECEIVER WITH 15-kV ESD PROTECTION www.ti.com SLLS576E - JULY 2003 - REVISED APRIL 2007 APPLICATION INFORMATION (continued) ESD Test Conditions Stringent ESD testing is performed by TI, based on various conditions and procedures. Please contact TI for a reliability report that documents test setup, methodology, and results. Human-Body Model (HBM) The HBM of ESD testing is shown in Figure 5. Figure 6 shows the current waveform that is generated during a discharge into a low impedance. The model consists of a 100-pF capacitor, charged to the ESD voltage of concern, and subsequently discharged into the device under test (DUT) through a 1.5-k resistor. RD 1.5 kW VHBM CS + - DUT 100 pF Figure 5. HBM ESD Test Circuit 1.5 VHBM = 2 kV DUT = 10-V, 1-W Zener Diode | IDUT - A 1.0 0.5 0.0 0 50 100 150 200 Time - ns Figure 6. Typical HBM Current Waveform Machine Model (MM) The MM ESD test applies to all pins using a 200-pF capacitor with no discharge resistance. The purpose of the MM test is to simulate possible ESD conditions that can occur during the handling and assembly processes of manufacturing. In this case, ESD protection is required for all pins, not just RS-232 pins. However, after PC board assembly, the MM test no longer is as pertinent to the RS-232 pins. 8 Submit Documentation Feedback PACKAGE OPTION ADDENDUM www.ti.com 24-May-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty MAX202CD ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CDE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CDG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CDRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CDRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CDW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CDWE4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CDWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CDWR ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CDWRE4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CDWRG4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CPWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CPWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CPWRE4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202CPWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202ID ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IDE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IDG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IDRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IDRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IDW ACTIVE SOIC DW 16 CU NIPDAU Level-1-260C-UNLIM 40 Addendum-Page 1 Green (RoHS & no Sb/Br) Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 24-May-2007 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty MAX202IDWE4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IDWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IDWR ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IDWRE4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IDWRG4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IPWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IPWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IPWRE4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX202IPWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 30-Jul-2010 TAPE AND REEL INFORMATION *All dimensions are nominal Device MAX202CDR Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 MAX202CDWR SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 MAX202CPWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 MAX202IDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 MAX202IDWR SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 MAX202IPWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 30-Jul-2010 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) MAX202CDR SOIC D 16 2500 333.2 345.9 28.6 MAX202CDWR SOIC DW 16 2000 346.0 346.0 33.0 MAX202CPWR TSSOP PW 16 2000 346.0 346.0 29.0 MAX202IDR SOIC D 16 2500 333.2 345.9 28.6 MAX202IDWR SOIC DW 16 2000 346.0 346.0 33.0 MAX202IPWR TSSOP PW 16 2000 346.0 346.0 29.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee(R) Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated