Ordering number : EN2749 N-Channel Junction Silicon FET 2SK1069 Low-Frequency General-Purpose Amplifier Applications Package Dimensions unit:mm 2058 [2SK1069] 0.425 * Low-frequency general-purpose amplifiers. * Ideal for use in variable resistors, analog switches, low-frequency amplifiers, and constant-current circuits. Features 0.3 0.15 0.2 Applications 3 0 to 0.1 0.425 2.1 1.250 * Adoption of FBET process. * Ultrasmall-sized package permitting 2SK1069applied sets to be made smaller and slimmer. 1 2 0.65 0.65 2.0 0.3 0.6 0.9 1 : Source 2 : Drain 3 : Gate SANYO : MCP Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Drain-to-Source Voltage Conditions Ratings Unit VDSX VGDS -40 V Gate Current IG 10 mA Drain Current 20 mA 150 mW Junction Temperature ID PD Tj 150 C Storage Temperature Tstg -55 to +150 C Gate-to-Drain Voltage Allowable Power Dissipation 40 V Electrical Characteristics at Ta = 25C Parameter Symbol Gate-to-Drain Breakdown Voltage Conditions V(BR)GDS IG=-10A, VDS=0 IGSS VGS=-20V, VDS=0 Gate-to-Source Leakage Current Zero-Gate Voltage Drain Current IDSS VGS(off) | yfs | Cutoff Voltage Forward Transfer Admittance VDS=10V, VGS=0 VDS=10V, ID=1A VDS=10V, VGS=0, f=1kHz * : The 2SK1069 is classified by IDSS as follows (unit : mA) : 1.2 3 3.0 2.5 4 6.0 5.0 5 Ratings min typ max -40 Unit V 1.2* -0.3 -0.9 4.5 9.0 -1.0 nA 12.0* mA -2.0 V mS Continued on next page. 12.0 (Note) Marking : FJ IDSS rank : 3, 4, 5 * For CP package version, use the 2SK771. (c) 2011, SCILLC. All rights reserved. Jan-2011, Rev. 0 www.onsemi.com Rev.0 I Page 1 of 3 I www.onsemi.com Publication Order Number: 2SK1069/D 2SK1069 Continued from preceding page. Parameter Symbol Conditions Ratings Unit Input Capacitance Ciss VDS=10V, VGS=0, f=1MHz 9.0 Reverse Transfer Capacitance Crss VDS=10V, VGS=0, f=1MHz VDS=10V, Rg=1k, ID=1mA, f=1kHz 2.1 pF 1.5 dB Noise Figure NF Rev.0 I Page 2 of 3 I www.onsemi.com pF 2SK1069 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. SCILLC strives to supply high-quality high-reliability products and recommends adopting safety measures when designing equipment to avoid accidents or malfunctions. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals," must be validated for each customer application by customer's technical experts. SCILLC shall not be held liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affi liates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affi rmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. % !" "& ' " " !"# $% & !'#'"# !!'((' ! ) * $%+ & !!'" "'- ) * & . " & ./&++000 + & (" #-! "-! *& !'#'"# !!'((' # ) * $%+ ! ! & , . " #$&www.onsemi.com $%+ & ''##' ! Rev.0 I Page 3 of 3 I www.onsemi.com * 2/ / 1 2SK1069/D