885007 - TriQuint Semiconductor

885007

2436 MHz BAW Filter

Data Sheet: Rev C 03/14/11

- 1 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Applications

WiFi bandpass filter that enables the coexistence of 4G

(WiMAX/LTE/TD-LTE) & WiFi signals

Handsets

Portable Hotspots

Mobile Routers

Smart Meters

High-power WLAN Access Points

Applicable reject bands: 2.6 GHz WiMAX/LTE,

2.3GHz WiMAX/LTE, LTE Bands 7 & 38, TD-LTE

Band 40, WCS, WiBro, Indian 2.3GHz 4G band

1.7 x 1.3 x 0.46 mm

Product Features

Functional Block Diagram

Top view

Low Loss in 2400-2472 MHz band

High Rejection in 2496-2690 MHz bands:

WiMAX/LTE/TD-LTE/Bands 7 & 38

High Rejection in 2300-2380 MHz bands:

WiMAX/WCS/WiBro/Band 40/Indian 4G band

Industry-leading small size: 1.7 x 1.3 x 0.46 mm

+28 dBm (CW) power handling

Performance over -30 to +85 ºC

Single-ended operation

Ceramic chip-scale package (CSP)

Hermetically Sealed

RoHS compliant, Pb-free

General Description

Pin Configuration

885007 is a high-performance, high-power Bulk Acoustic

Wave (BAW) bandpass filter with extremely steep skirts,

simultaneously exhibiting low loss in the WiFi band & high

near-in rejection in the 2.3GHz & 2.6GHz

WiMAX/LTE/TD-LTE bands.

885007 is specifically designed to enable coexistence of

WiFi and WiMAX/LTE signals within the same device or in

close proximity to one another.

885007 uses advanced and inexpensive packaging

techniques to achieve an industry-leading 1.7 x 1.3 x 0.46

mm package. The filter exhibits excellent power handling

capabilities.

885007 is referenced on multiple designs with the leading

WiMAX chipset makers

Pin # SE

Description

9

Input

6

Output

1,2,3,4,5,7,8,10

Case Ground

Ordering Information

Part No.

Description

885007

packaged part

885007-EVB

evaluation board

Standard T/R size = 10,000 units/reel.

6

7

8

9

5

10

3

2

1

4

885007

2436 MHz BAW Filter

Data Sheet: Rev C 03/14/11

- 2 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Specifications

Electrical Specifications (1)

Specified Temperature Range: (2) -30 to + 85 ºC (unless otherwise noted)

Parameter

Conditions

Min

Typical (3)

Max

Units

Center Frequency

-

2436

-

MHz

Maximum Insertion Loss

2400 - 2472 MHz @ 25 ºC

2400 - 2472 MHz

2401 - 2480 MHz

2480 - 2482 MHz (6)

-

1.8

-

4.5

7.0

2.5

3.5

-

dB

Absolute Attenuation (4)

800 - 2000 MHz

2000 - 2300 MHz

2300 - 2360 MHz

2360 - 2370 MHz (6)

2370 - 2380 MHz (6)

2495 - 2517 MHz @ 25 ºC

2495 - 2517 MHz

2496 - 2502 MHz (7)

2500 - 2502 MHz

2500 - 2510 MHz (7)

2502 - 2690 MHz

2690 - 5000 MHz

7200 - 7416 MHz

22

24

30

15

5

20

12.5

-

26

25

-

25

26

36

20

8

34

-

52

50

55

30

28

14

-

dB

Amplitude Ripple

2400 - 2472 MHz (within any

18MHz Channel)

-

1.3

2.0

dB p-p

Input/output Return Loss

2400 - 2472MHz

6.0

14

-

dB

Source Impedance (single-ended) (5)

-

50

-

Load Impedance (single-ended) (5)

-

50

-

Notes:

1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3

2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over

temperature

3. Typical values are based on average measurements at room temperature

4. Relative to zero dB

5. This is the optimum impedance in order to achieve the performance shown

6. These bands fall on the filter transitions, thus the typical attenuation/loss values given are prone to high variability

7. Average attenuation level over the band

Absolute Maximum Ratings

Parameter (8)

Rating

Operating Temperature

-30 to +85 oC

Storage Temperature

-40 to +85 oC

Input Power (9) (In passband, CW signal)

+28 dBm

8. Operation of this device outside the parameter ranges given above may cause permanent damage.

9. Represents the maximum allowable power level without electrical degradation equivalent to duration of 10,000 hours at 55 C

885007

2436 MHz BAW Filter

Data Sheet: Rev C 03/14/11

- 3 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Reference Design – 50 SE Input, 50 SE Output

Schematic (top view)

Pin Functions

1. Notes:

Actual matching values may vary due to PCB layout and parasitic

9

Input

6

Output

1,2,3,4,5,7,8,10

Ground

PC Board

PCB routing detail

Notes:

Top, middle & bottom layers: 1 oz copper

Substrates: FR4 dielectric, .031” thick

Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick

Hole plating: Copper min .0008µm thick

Notes:

1. Grey indicates metalized area

2. This footprint represents a recommendation only

3. For solder pad recommendation see mechanical information

Bill of Material

Reference Desg.

Value

Description

Manufacturer

Part Number

L1

10nH

Coil Wire-wound, 0402, +/- 0.2nH

MuRata

LQW15AN1N0C00

L2

12nH

Coil Wire-wound, 0402, +/- 0.2nH

MuRata

LQW15AN1N2C00

PCB

N/A

3-layer

multiple

960850

885007

2436 MHz BAW Filter

Data Sheet: Rev C 03/14/11

- 4 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Typical Performance (at room temperature)

885007

2436 MHz BAW Filter

Data Sheet: Rev C 03/14/11

- 5 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Mechanical Information

Package Information, Dimensions and Marking

0.46 NOM.

0.50 MAX.

0.24

1.54

1.70

0.55 0.205

0.45

0.20

1.151.30

0.235

0.24

Package Style: CSP-1713

Dimensions: 1.70 x 1.30 x 0.46 mm

Body: Al2O3 ceramic

Lid: Kovar, Ni plated

Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni

plating

All dimensions shown are nominal in millimeters

All tolerances are ±0.15mm except overall length and width

±0.10mm

Marking

code

Marking

Date code

M

12

ID dot

WWY

MFG site

The date code consists of: WW = 2 digit week,

Y = last digit of year, M = manufacturing site code

PCB Footprint

0.15

1.63

0.295

0.54

0.64

0.325

1.24

0.15

0.29

Tape and Reel Information

Standard T/R size = 10,000 units/reel. All dimensions are in millimeters

AA

B

1.75

4.0

4.0 2.0

8.0

3.50

0.60

1.5

SECTION A-A

SECTION B-B

0.63

0.250

5° MAX. TYP.

1.47

1.88

8.8 ID dot

2.0 Direction of travel

Ø330

Ø20.2

Ø13.0

Ø102

2.7

885007

2436 MHz BAW Filter

Data Sheet: Rev C 03/14/11

- 6 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Product Compliance Information

ESD Information

ESD Rating: 3A

Value: Passes 6000 V min.

Test: Human Body Model (HBM)

Standard: JEDEC Standard JESD22-A114

ESD Rating: C

Value: Passes 400 V min.

Test: Machine Model (MM)

Standard: JEDEC Standard JESD22-A115

Solderability

Compatible with the latest version of J-STD-020, lead

free solder, 260°C

Refer to Soldering Profile for recommended guidelines.

This part is compliant with EU 2002/95/EC RoHS

directive (Restrictions on the Use of Certain Hazardous

Substances in Electrical and Electronic Equipment).

This product also has the following attributes:

Halogen Free (Chlorine, Bromine)

Antimony Free

TBBP-A (C15H12Br402) Free

PFOS Free

SVHC Free

MSL Rating

Devices are hermetic, therefore MSL is not applicable.

Contact Information

For the latest specifications, additional product information, worldwide sales and distribution locations, and information about

TriQuint:

Web: www.triquint.com Tel: +1.407.886.8860

Email: info-sales@tqs.com Fax: +1.407.886.7061

For technical questions and application information:

Email: flapplication.engineering@tqs.com

Important Notice

The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain

herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint

assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained

herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with

the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest

relevant information before placing orders for TriQuint products. The information contained herein or any use of such

information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property

rights, whether with regard to such information itself or anything described by such information.

TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining

applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.