REVISION AE NOTES: MMSDX-XX-XXX-X-XX.XX-X-X-XXX 1. C REPRESENTS A CRITICAL DIMENSION. FEP CABLE OPTION 2. BURR ALLOWANCE: .003[.08] MAX. -T: FEP INSULATION OPTION 3. PARTS TO BE MOLDED TO POSITION. (LEAVE BLANK FOR STANDARD 4. MINIMUM PIN PULLOUT FORCE: 4.000LB[17.79N] PVC INSULATION) SINGLE 5. CONTACT MUST BE INSERTED UNTIL RETENTION -M: METAL LATCH (USE IPD1-XX-D-X-M) No OF POSITIONS FEATURE LOCKS INTO PLACE. (LEAVE BLANK FOR PLASTIC) -02 THRU -25 6. ALL FINISHED GOODS ARE TO BE ELECTRICAL TESTED INCLUDING HI-POT TEST (PER ROW) @ 1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY DOUBLE WITH 1 LABEL-ET. C WIRE GAUGE (AWG) -LUS: PLASTIC LATCH UP, STRAIGHT 7. TINNED COPPER WIRE IS ROHS COMPLIANT. PVC: -20, -22, -24, -26, -28, -30 -LDS: PLASTIC LATCH DOWN, STRAIGHT 8. PARTS ARE TO BE LAYER PACKAGED. FEP: -20,-24-28-30 -LUX: PLASTIC LATCH UP, CROSSED 9. MINIMUM METAL LATCH RETENTION FORCE: 1.000LB[4.45N] COLOR CODE -LDX: PLASTIC LATCH DOWN, CROSSED 10. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP -MUS: METAL LATCH UP, STRAIGHT C (SEE TABLE 3, SHEET 3) C DIMENSIONS, TOLERANCES, AND TOOLING. -MDS: METAL LATCH DOWN, STRAIGHT (LEAVE BLANK FOR STANDARD 11. FOR LENGTHS LESS THAN 12 IN, TOLERANCE SHALL -MUX: METAL LATCH UP, CROSSED BLACK CABLE) BE .125[3.18]. FOR OTHER LENGTHS, TOLERANCES SHALL BE 2%. -MDX: METAL LATCH DOWN, CROSSED (NOT AVAILABLE WITH FEP OPTION) 12. LOCATION OF GATE PAD IS AT THE DISCRETION OF THE VENDOR. POLARIZATION OPTION PLATING SPECIFICATION C (-P, -K, OR -G OPTION IS REQUIRED.) -F: FLASH SELECTIVE (USE C-179-XX-F) -P: POLARIZATION (SEE FIG 3, SHEET 2) -L: LIGHT SELECTIVE (USE C-179-XX-L) (No OF POS x .100[2.54]) (NOT AVAILABLE WITH -LUS, -LDS, -LUX, -K, -G OPTIONS) -S: SELECTIVE (USE C-179-XX-S) + .055[1.40] REF -K: KEYED POLARIZATION C ASSEMBLED LENGTH (USE IPD1-XX-D-K) (SEE FIG 4, SHEET 2) 05 01 (NOT AVAILABLE WITH -P, -G OPTIONS) SPECIFY IN INCHES [USE DWC-XX-XX] -G: GUIDE POST (SINGLE END: 03.00 INCH MINIMUM, (USE IPD1-XX-D-GP) (SEE FIG 6, SHEET 3) DOUBLE END: 03.25 INCH MINIMUM) .353 8.97 .250 6.35 (NOT AVAILABLE WITH -LDS, -LUX, -P, -K OPTIONS) REF REF END OPTION 10 .100 2.54 REF C -S: SINGLE END -D: DOUBLE END (MUST CHOOSE FROM LUS, LDS, LUX, LDX, MUS, MDS, MUX, OR MDX) 06 "A" .505 12.83 REF IPD1-XX-D (LEAVE BLANK FOR NO POLARIZATION; AVAILABLE TO EXISTING CUSTOMERS ONLY) .285 7.24 REF C DWLX-02-XXXX-D-XX.XX-XX-XX XX.XX (SEE NOTE 11) C XX.XX (SEE NOTE 11) DWLX-02-XXXX-S-XX.XX-XX-XX FIG 1 MMSD-05-22-X-XX.XX-S SHOWN "A" SECTION "A"-"A" FIG. 2 MMSD-05-22-X-XX.XX-D SHOWN UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS ANGLES .XX: .01 [.3] 2 .XXX: .005 [.13] .XXXX: .0020 [.051] MATERIAL: C:\EnterpriseVault\dwg\MISC\Mktg\MMSDX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING HOUSING: NYLON 66, COLOR: WHITE CONTACT: PHOS BRONZE CABLE; INSULATION: SEE CALLOUT WIRE: TINNED COPPER LATCH: NICKEL-PLATED BeCu, #25, 1/2 HT SHEET SCALE: 1:0.666667 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .100[2.54] SOCKET DISCRETE CABLE ASSEMBLY DWG. NO. MMSDX-XX-XXX-X-XX.XX-X-X-XXX BY: DEAN P 07/16/2004 SHEET 1 OF 3 REVISION AE 01 N N/2 + 1 N N/2 (SEE TABLE 2) N/2 N/2 + 1 01 (SEE TABLE 2) LATCHEND 1 LATCHEND 2 N N/2 LATCHEND 2 -LUS N/2 N N N/2 N/2 + 1 01 (SEE TABLE 2) LATCHEND 1 LATCHEND 2 N N/2 + 1 LATCHEND 2 FIG 4 N/2 N/2 + 1 01 (SEE TABLE 2) LATCHEND 1 -LDX [LATCH DOWN - CABLE CROSSED] (SEE SHEET 3, TABLE 4 FOR PIN MAPPING) -K: KEYED POLARIZATION (MMSDX-06-XX-X-XX.XX-X-K-XXX SHOWN) (NOT AVAILABLE WITH -P OPTION) (SAME AS FIG. 1, UNLESS OTHERWISE STATED) 02 01 IPD1-XX-D-P N 01 (SEE TABLE 2) [LATCH UP - CABLE CROSSED] (SEE SHEET 3, TABLE 4 FOR PIN MAPPING) FIG 3 01 (SEE TABLE 2) -LDS N/2 -LUX -P: POLARIZATION (MMSDX-06-XX-X-XX.XX-X-P SHOWN) (NOT AVAILABLE WITH -LUS, -LDS, -LUX OPTIONS) LATCHEND 1 N/2 [LATCH DOWN - CABLE STRAIGHT] (SEE SHEET 3, TABLE 4 FOR PIN MAPPING) N/2 + 1 (SEE TABLE 2) N/2 + 1 N/2 + 1 01 (SEE TABLE 2) [LATCH UP - CABLE STRAIGHT] (SEE SHEET 3, TABLE 4 FOR PIN MAPPING) 01 N -02 POS (DIFFERENT AS SHOWN) PROPRIETARY NOTE .022 0.56 REF THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. 07 DO NOT SCALE DRAWING IPD1-02-D-K IPD1-XX-D-K C:\EnterpriseVault\dwg\MISC\Mktg\MMSDX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW SHEET SCALE: 1.25:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .100[2.54] SOCKET DISCRETE CABLE ASSEMBLY DWG. NO. MMSDX-XX-XXX-X-XX.XX-X-X-XXX BY: DEAN P 07/16/2004 SHEET 2 OF 3 REVISION AE FIG 5 FIG 6 (MMSDX-06-XX-X-XX.XX-S-M SHOWN) (SAME AS FIG 1, UNLESS OTHER WISE STATED) +.010 +0.25 .260 - .005 6.60 - 0.13 (MMSDX-06-XX-X-XX.XX-S-G SHOWN) (NOT AVAILABLE WITH -LDS, -LUX, -P, -K OPTIONS) (SAME AS FIG 1, UNLESS OTHER WISE STATED) C IPD1-XX-D-X-R C .618 15.70 REF +.003 .310 7.87 REF +0.08 .109 - .002 2.77 - 0.05 C IPD1-XX-D-GP LTC-14-01-N PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 C:\EnterpriseVault\dwg\MISC\Mktg\MMSDX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .100[2.54] SOCKET DISCRETE CABLE ASSEMBLY DWG. NO. MMSDX-XX-XXX-X-XX.XX-X-X-XXX BY: DEAN P 07/16/2004 SHEET 3 OF 3