009176001032006 - AVX - Product.Network

SSL - Discrete Wire IDC

Series 9176

The 917X series of surface mount Insulation Displacement Connectors (IDC)

were developed to meet the harsh automotive and industrial market

applications for connecting individual wires directly to a PCB ranging from 14

AWG to 28 AWG. This industry proven contact system has been tested to

automotive levels of shock, vibration, and temperature cycling to prove their

reliability and robustness. The simplicity of inserting a wire into the connector

with a small tool allows a wide range of devices to be connected to the PCB

without soldering. In SSL applications specifically, these connectors are used to

bring power and signal onto the PCB or are used to daisy chain multiple boards

together in a long string. While the IDC contact provides a gas-tight connection

to conductor of the wire, the housing has been designed to grab the insulation

of the wire to provide a positive strain relief even in the harshest conditions. In

case of repair, the wires can be removed and replace up to three times.

The 9176 series accepts 18 AWG to 24 AWG wires with an insulation diameter

ranging from 1.1mm to 2.1mm. These dual contact connectors support a 10

amp current rating with two large SMT solder tails per wire to provide maximum

stability on the PCB. Available in 1p-3p configuration, these connectors can be

end stackable for higher pin counts. The 9176 series also comes with optional

locking strain relief caps that act as the termination tool for severe vibration

applications.

ELECTRICAL

• Current Rating: 10 Amp / Contact

• Voltage Rating: 250 VAC

9176

Series

Prefix

00X

Number of Ways

Plating

Option

06 = Pure Tin

all over

HOW TO ORDER

Insulator Color

00X

Wire Gauge Size

Code Color Application

0 Black Industrial

1 White Lighting

ENVIRONMENTAL

• Operating Temperature:

-40ºC to +125ºC

MECHANICAL

• Insulator Material: Nylon 46: UL94V0

• Contact Material: Phosphor Bronze

• Plating: Tin over Nickel

• Durability: 3 Cycles

FEATURES AND BENEFITS

• IDC contact provides a gas-tight connection to the PCB for long term reliability

•

Connector housing captures the wire insulation for positive strain relief

•

Tested to automotive levels on shock, vibration and temperature cycling for

reliability

•

Low and high volume assembly tools to match production volumes

•

Reduced total applied cost versus solder or crimp processes

•

Optional thru and end caps lock in place to provide maximum strain relief

•

High temperature insulator capable to 260ºC reflow soldering processes

APPLICATIONS

• Connecting discrete wire components

directly to the PCB

• Bringing power and signals onto a PCB

• Daisy chaining PCB’s together to create

a continuous string of boards

• Application Notes: refer to 201-01-124

Code No of Details

Ways

001 1 Page 44

002 2 Page 45

003 3 Page 46

Code Accepted Wire Cap Code

Wire Gauge Insulation

Pages 47-48

001 18 Gauge Stranded Ø 1.6-2.1 021

011 20 Gauge Stranded Ø 1.6-2.1 021

022 22 Gauge Stranded Ø 1.1-1.6 016

032 24 Gauge Stranded Ø 1.1-1.6 016

Certification: UL File #E320991

SSL - Discrete Wire IDC

Series 9176

18-24 AWG 1 WAY IDC CONNECTOR

NOTES:

1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.

2. CONTACT MATERIAL: PHOSPHORE BRONZE.

INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.

COLOR REFER TO PAGE 43.

3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 24 AND 18 GAUGE

STRANDED WIRE.

4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.

5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND

APPLICATION NOTES 201-01-124.

6. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 47.

7. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 49.

PACKING DETAILS

REEL QTY 1000

LEADER 480MM

TRAILER 120MM

SMT PCB LAYOUT

PURE TIN PADS

Code Accepted A Wire B

Wire Gauge Insulation

001 18 Gauge Stranded 0.72 Ø 1.6-2.1 2.1

011 20 Gauge Stranded 0.60 Ø 1.6-2.1 2.1

022 22 Gauge Stranded 0.47 Ø 1.1-1.6 1.6

032 24 Gauge Stranded 0.37 Ø 1.1-1.6 1.6

SSL - Discrete Wire IDC

Series 9176

18-24 AWG 2 WAY IDC CONNECTOR

PACKING DETAILS

REEL QTY 1000

LEADER 480MM

TRAILER 120MM

SMT PCB LAYOUT

PURE TIN PADS

Code Accepted A Wire B

Wire Gauge Insulation

001 18 Gauge Stranded 0.72 Ø 1.6-2.1 2.1

011 20 Gauge Stranded 0.60 Ø 1.6-2.1 2.1

022 22 Gauge Stranded 0.47 Ø 1.1-1.6 1.6

032 24 Gauge Stranded 0.37 Ø 1.1-1.6 1.6

NOTES:

1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.

2. CONTACT MATERIAL: PHOSPHORE BRONZE.

INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.

COLOR REFER TO PAGE 43.

3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 24 AND 18 GAUGE STRANDED WIRE.

4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.

5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND APPLICATION

NOTES 201-01-124.

6. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 47.

7. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 49

8. FOR PRESS WIRE ASSEMBLY TOOLING REFER TO PAGE 50.

9. FOR ACCESSORY CAPS REFER TO PAGES 47 AND 48.

SSL - Discrete Wire IDC

Series 9176

18-24 AWG 3 WAY IDC CONNECTOR

PACKING DETAILS

REEL QTY 1000

LEADER 480MM

TRAILER 120MM

SMT PCB LAYOUT

PURE TIN PADS

Code Accepted A Wire B

Wire Gauge Insulation

001 18 Gauge Stranded 0.72 Ø 1.6-2.1 2.1

011 20 Gauge Stranded 0.60 Ø 1.6-2.1 2.1

022 22 Gauge Stranded 0.47 Ø 1.1-1.6 1.6

032 24 Gauge Stranded 0.37 Ø 1.1-1.6 1.6

NOTES:

1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.

2. CONTACT MATERIAL: PHOSPHORE BRONZE.

INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.

COLOR REFER TO PAGE 43.

3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 24 AND 18 GAUGE STRANDED WIRE.

4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.

5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND APPLICATION

NOTES 201-01-124.

6. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 47.

7. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 49

8. FOR PRESS WIRE ASSEMBLY TOOLING REFER TO PAGE 50.

9. FOR ACCESSORY CAPS REFER TO PAGES 47 AND 48.

Code Slot A (AWG) Diameter B Text

016 1.60 (22-24) 1.00 9176 Ø1.6

021 2.10 (18-20) 1.50 9176 Ø2.1

Color X00

Black 000

White 100

NOTES:

1. CAP FOR IDC WIRE TO BOARD CONNECTION, 2 AND 3 WAY,

THROUGH WIRE.

2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE

PAGE 43 FOR THE CORRECT PART CODE TO MATCH WIRE.

3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS

SEE TABLE BELOW.

4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW.

5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION

DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM.

6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.

7. PACKED IN BAGS, 1000 PIECES PER BAG.

SSL - Discrete Wire IDC

Series 9176

60-9176-00X-0XX-X00

ACCESSORY CAP – THROUGH WIRE

Color X99

Black 099

White 199

NOTES:

1. CAP FOR IDC WIRE TO BOARD CONNECTION, 2 AND 3

WAY, WITH WIRE STOP.

2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE

PAGE 43 FOR THE CORRECT PART CODE TO MATCH WIRE.

3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS

SEE TABLE BELOW.

4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW.

5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION

DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM.

6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.

7. PACKED IN BAGS, 1000 PIECES PER BAG.

SSL - Discrete Wire IDC

Series 9176

60-9176-00X-0XX-X99

ACCESSORY CAP – WIRE STOP

Code Slot A (AWG) Diameter B Text

016 1.60 (22-24) 1.00 9176 Ø1.6

021 2.10 (18-20) 1.50 9176 Ø2.1

SSL - Discrete Wire IDC

Series 9176

HAND INSERTION TOOLING

FOR SINGLE 18/24 GAUGE WIRE

CLEARANCE AREA ON PCB FOR HAND TOOLING

HIGH PRODUCTION

Metal

Max Tool

Insulation Dia Part Number

(AWG)

2.10 (18-20) 06 9176 7017 01 000

1.60 (22-24) 06 9176 7017 02 000

Max Tool

Insulation Dia Part Number

(AWG)

2.10 (18-20) 06 9176 7016 01 000

1.60 (22-24) 06 9176 7016 02 000

MED PRODUCTION

Metal/Plastic

UNIVERSAL HANDLE

Details Tool

Part Number

6.35 A/F HEX 06 7000 7730 01 000

BIT HOLDER

1 WAY 2 WAY 3 WAY

SSL - Discrete Wire IDC

Series 9176

INSERTION TOOLING

REQUIRES HAND PRESS WITH FLAT ROCK PLATES

HIGH PRODUCTION

Metal

No. Max Tool

of Ways Insulation Dia Part Number

(AWG)

22.10 (18-20) 06 9176 7017 01 002

1.60 (22-24) 06 9176 7017 02 002

32.10 (18-20) 06 9176 7017 01 003

1.60 (22-24) 06 9176 7017 02 003

2 WAY

3 WAY

NOTES:

1. DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.

2. MAXIMUM COMPONENT HEIGHT 1.00MM IN THIS AREA.

3. MAXIMUM COMPONENT HEIGHT 6.00MM IN THIS AREA.

4. THE SAME RESTRICTIONS APPLY TO ALL WIRE INSULATION DIAMETERS

5. 2 AND 3 WAY TOOLS ONLY, FOR USE UNDER HAND PRESS WITH FLAT PLATES.

6. FOR HAND TOOLING REFER TO PAGE 47.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

AVX:

009176003001006 009176002022006 069176701602000 009176002001006 069176701601000

009176002032006 009176002011006 009176003011006 009176003032006 009176003022006 009176001001006

009176001001106 009176001011006 009176001011106 009176001022006 009176001022106

009176001032006 009176001032106 069176701701000 069176701701002 069176701701003 069176701702000

069176701702002 069176701702003 009176002001106 009176002032106 009176002022106

009176003001106 009176002011106 009176003011106 009176003022106 009176003032106