62-page professionally written lab manual
authored by university professor, Enoch Hwang,
PhD.
iPad version of lab manual available on iTunes
12 hands-on labs correlated to any textbook for a
digital logic course.
Sturdy blow molded carrying case makes the
entire lab lightweight and portable.
Attractive and easy to use system draws students
in to the beauty of digital logic and embedded
systems design.
Complete kit with 9V wall adapter and 100
machined pin hookup wires. No need to buy
anything else.
All gate elements are pre-mounted and fully
integrated.
Expandable breadboard allows the system to grow
as students' knowledge increases.
Perform experiments using standard TTL logic.
Well regulated 5V power (Vcc) and ground (GND)
points.
Commonly referenced truth table chart inside the
case lid.
High quality machined sockets for input and
output interconnections.
Each gate element is presented in its easy to
visualize graphic form.
DL-020 Sequential Logic Trainer
Features:
Innovative Training Solutions globalspecialties.com
Embedded Systems Design Series
Digital Logic Trainers
Some of the logic
circuits that can be
implemented with
this trainer include:
SR latch
D latch with and
without enable
D flip-flop with and
without enable
SR flip-flop
JK flip-flop
T flip-flop
4-bit register
Serial-to-parallel shift
register
4-bit up counter
4-bit up/down counter
Finite state machine
(FSM)
Rotating lights
controller
Car security system
controller
Jeopardy® contestant
response controller
Traffic light controller
Other custom
controllers
Global Specialties’ DL-020 is the second
model in its series of embedded systems
design trainers. The DL-020 teaches students
the advanced concepts of sequential digital
logic design, which is an essential step
towards understanding microprocessor and
microcontroller logic.
With the DL-020, all necessary logic
components are included and pre-mounted for
fast, easy implementation of sequential
circuits that are used as the building blocks of
microprocessors. These sequential circuits
include the SR latch, D latch, register,
memory, finite state machine (FSM), and
several real-life controller examples.
Global Specialties’ logic trainer simplifies the
teaching process by eliminating the need to
discretely wire IC’s as all gate elements are
pre-mounted, de-coupled and de-bounced,
ready for immediate classroom use. Students
can spend their time directly on logic training.
Most importantly, the trainer includes a 62-
page professionally written training manual
featuring an overview of sequential digital
logic and 12 corresponding hands-on labs
enhancing any textbook currently in use.
The DL-020 is a complete and ruggedly
packed trainer that will provide a solid
learning platform to individuals and classroom
students.
Model DL-020
Switch
between 1Hz
and 20Hz
12
12
8
8
8
12
8
4
4
8
1
8
3
Yes
Yes
Yes
yes
yes
Yes
13.5 in
8.5 in
3.5 in
3.40 lbs
Analog &
Digital
Design
Workstation
Innovative Training Solutions globalspecialties.com
©2012 Global Specialties 22820 Savi Ranch Parkway Yorba Linda, CA 92887 1-800-572-1028
Embedded Systems Design Series
Digital Logic Trainers
Specifications
Training Manual
Chapter 1:
Sequential Logic Design
Trainer
Model DL-020
Chapter 2:
Microprocessors
Introduction to Microprocessors
Combinational and Sequential Circuit
Analogy
Chapter 3:
Sequential Logic Circuits
Identifying Sequential Circuits
Analysis of Sequential Circuits
Finite State Machines
Synthesis of Sequential Circuits
Chapter 4:
Labs
The NAND gate
SR Latch
D Latch
D Latch with Enable
D Flip-Flop
D Flip-Flop with Enable
Register
Binary Up Counter
Car Security System Version 2
Rotating Lights Controller
Jeopardy® Contestant Response
Controller
Traffic Light Controller
Sequential
Logic Trainer
DL-020
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Global Specialties:
DL-020