MU Type Fiber Optic Connectors HMU Series Back panel side Package side Features 1. JIS, IEC standard compliant and intermateability test certified. Comply with JIS C 5983 (F14 type fiber optic connectors) and IEC 61754-6. MU intermate test by NTT certified connector. 2. Flame resistant Satisfies flammability rating UL94-V0 3. Backplane MU Backplane connector has a self-holding mechanism which does not transfer any force on the back panel when both side of connector assemblies are fully connected. Back panel side connectors can be removed or inserted even both sides are mated. 4. Wide Variety of adapter type Number of Fiber connections Single Duplex 4 way 8 way 16 way Board Mounting K K --- K --- Snap-in Panel Mounting & Screw Panel Mounting K K K K K Type 5. Simplified plugs and Receptacles Extremely small size (only 13.75mm Plug length). MU simplified plug is designed for equipments inside connection. Applications Optical terminal equipment, optical relay racks, test equipment, telecommunication equipment and other systems requiring Small Form Factor optical connections. Please contact us if you have any requests. Hirose will offer excellent solutions to meet your requirements. 5 Product Specifications Ratings Operating temperature range Optical Characteristics Item Test Method (IEC 61300/JIS C 5961) Mechanical Characteristics -25C to +70C Specifications 0.5dB max. (AdPC) Wavelength 1310nm (LED) 0.3dB max. (AdPC) Wavelength 1310nm (LD) 40dB min. (AdPC) Measured with corresponding connector. Simplex plug Engagement force: 12.5 N max. Separation force: 12.5 N max. Duplex plug Engagement force: 25 N max. Separation force: 25 N max. Ferrule with drawal force Extract zirconia gauge 1.249 0.0005 mm diameter from split sleeve. Copper alloy split sleeve Zirconia split sleeve Cable retention (Straight pull) 70N tensile loads for one minute. 1) Insertion loss fluctuation after test: 0.2dB max. 2) No visible damage, dislocation of clamp or cable. Durability (cycles, mating/unmating) 200 times (Backplane) 500 times (Plug) Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. Shock Acceleration of 981 m/s2, 6 ms duration, sin half-wave waveform, 10 cycles in each of the 3 axis. Humidity (Temperature/ humidity- cycles) -10C to 65C, humidity: 90% to 96% 10 cycles Change of Temprature -25C to +70C 100 cycles Insertion Loss Return Loss MM(GI) SM MM(GI) Separation forces Dry heat 960 hours at 85C Cold 960 hours at -25C Salt mist 48 hours in a 5% concentration of salt mist Materials Part 6 Storage temperature range Wavelength 1310nm (LD) SM Engagement and Environmental Characteristics -25C to +70C Material Simplex plug housing Synthetic resin Spring Steel Ferrule Zirconia Simplex adapter housing Synthetic resin Adapter metal fittings Stainless steel or copper alloy (Nickel plating) Simplified receptacle housing Synthetic resin Simplified plug Zirconia Backplane connector housing Synthetic resin Split sleeve Zirconia or copper alloy Dust cap Synthetic resin 1N to 3N 1N to 2.5N 1) Insertion loss fluctuation after test: 0.2dB max. 2) No visible damage, cracks or part dislocation. No significant corrosion. Function diagram Duplex plug HMUA-2P2-H1 or HMUA-2P2-H2 and HMUA-F3-A1** Terminator Simplex plug HMUA-TM-P1 8-position Backpanel side HMUA-P2-H1 or HMUA-P2-H2 and HMUA-F3-A1** HMUB-L8HA-1 or HMUB-L8HB-1 8-position package side HMUB-L8PA-1 Dust cap HMUB-DP-1 Back panel Thickness: 2.4mm or 3.2mm Package Gold plate Duplex backpanel side HMUB-L2HA-1 or HMUB-L2HB-1 Sleeve holder HMUB-SH-1 Dust cap HMUB-DJ-1 Duplex package side HMUB-L2PA-1 Simplex J plug HMUAJ-P1-H1 or HMUAJ-P1-H2 and HMUA-F3-A1** Terminator HMUAJ-TM-P1 7 Plug Housings Simplex Plug Housing for 2mm cable 4.35 6.6 5.6 3.95 23.6 48.5 Part Number HMUA-P2-H1(07) HMUA-P2-H2(07) CL No. 710-0047-9-07 710-0001-8-07 Boot color Blue Light purple Simplex Plug Housing for 0.9mm fiber 4.35 6.6 5.6 3.95 23.6 28 Part Number HMUA-P0.9-H1(01) HMUA-P0.9-H2(01) CL No. 710-0158-0-01 710-0159-2-01 Boot color Blue Light purple JAPAN Duplex Plug Housing for 2mm cable 6.6 5.6 8.85 8.45 4.5 23.6 48.5 Part Number HMUA-2P2-H1(07) HMUA-2P2-H2(07) CL No. 710-0048-1-07 710-0002-0-07 Boot color Blue Light purple JAPAN Duplex Plug Housing for 0.9mm fiber 6.6 5.6 8.85 8.45 4.5 23.6 28 Part Number HMUA-2P0.9-H1(01) HMUA-2P0.9-H2(01) CL No. 710-0162-7-01 710-0163-0-01 Boot color Blue Light purple Simplex Plug Housing for 1.1mm Cable 4.35 6.6 5.6 3.95 23.7 54 Part Number CL No. Boot color HMUA-P1.1-H2 710-0133-9 Light purple Note: Ferrules, HMUA-F3A2-A12*(10) should be needed for this plug. (see page 9) Certain assemble tools are also needed. Please contact sales representative for the details. 8 Ferrules O1.8 O1 (Hole diameter) (Hole diameter) OA+0.001 0 2.6 O3 .1 O1.2490.0005 For MU plugs 4.95 +0.05 0 2.6 1.5 12 CL No. A dimension HMUA-F3-A125(10) Part Number 710-0024-3-10 0.1255 HMUA-F3-A1255(10) 710-0121-0-10 0.1255 HMUA-F3-A126(10) 710-0025-6-10 0.1265 Applicable Fiber cable SM,MM O1.8 O0.6 (Hole diameter) O1.525 O1.2490.0005 (Hole diameter) OA +0.001 0 2.6 O3 .1 For HMUA-P1. 1-H* plugs 2.6 4.95 +0.05 0 1.5 12 Part Number CL No. A dimension HMUA-F3A2-A125(10) 710-0138-2-10 0.1255 HMUA-F3A2-A1255(10) 710-0142-0-10 0.1255 HMUA-F3A2-A126(10) 710-0139-5-10 0.1265 Applicable Fiber cable SM,MM 9 Adapters Simplex Adapter / Snap-in Panel Mounting BPanel Cutout 10.7 +0.2 0 10.4 MU-A JAPAN 7.6 +0.2 0 7.3 10 26 12 Panel thickness:1.6mm 1.8 Part Number CL No. Split sleeve HMUA-A-3 710-0103-8 Zirconia Simplex Adapter / Screw Panel Mounting BPanel Cutout 17.5 12.5 12.50.2 4 2. 7.6 +0.2 0 MU-AS JAPAN 10.7 +0.2 0 10.4 O 2- 7.3 26 2- O2.4 +0.2 0 or 2-M20.4 12 Part Number CL No. Split sleeve HMUA-AS-3 710-0104-0 Zirconia Simplex Adapter / Board Mounting 12.7 0.1 4-O2.40.1 9.5 0.1 9.5 10.4 MU-A MU-A BBoard Mounting Pattern 6.6 26 Board thickness: 1.6mm 12.7 10 Part Number CL No. Split sleeve HMUA-AH-3 710-0105-3 Zirconia 4.5 Duplex adapter / Snap-in Panel Mounting 4.5mm Type 2 1 1 BPanel Cutout 14 MU-2A JAPAN 2 10.1 9.8 12 14.3 +0.2 0 26 +0.2 0 4.5 Panel thickness:1.6mm 12 1.8 Part Number CL No. Split sleeve HMUA-2A-4 710-0187-8 Zirconia Duplex Adapter / Screw Panel Mounting 6.25mm Type 6.2 5 Refer to page 75 for details. Part Number CL No. Split sleeve HMUA-2AK-1 710-0196-9 Zirconia Note:The outer dimension is the same as the above "HMUA-2A-4". Duplex Adapter / Screw Panel Mounting Duplex Adapter / Board Mounting BBoard Mounting Pattern 12.7 0.1 15 0.2 10.1+0.2 0 2- O2.4 +0.2 0 or 2-M20.4 12.7 0.1 14.3 +0.2 0 5 0.2 BPanel Cutout 4- O2.4 0.1 Board thickness: 1.6mm Part Number CL No. Split sleeve Part Number CL No. Split sleeve HMUA-2AS-4 710-0188-0 Zirconia HMUA-2AH-4 710-0189-3 Zirconia 11 8-Position Adapter / Snap-in Panel Mounting 26 1.8 12 BPanel Cutout 12 MU-8A JAPAN 8 9.8 8 7 4 7 3 6 4 2 6 3 1 5 2 5 1 10.1+0.2 0 42.3+0.2 0 5 4.5 42 Panel thickness:1.6mm Part Number CL No. Split sleeve HMUA-8A-3 710-0174-6 Zirconia 26 8-Position Adapter / Screw Panel Mounting BPanel Cutout 12 MU-8AS JAPAN 42.3 +0.2 0 250.2 8 7 8 9.8 15 20 7 4 6 4 3 6 3 2 5 2 1 5 1 15 0.2 10.1+0.2 0 5 4.5 2.4 2-O2.4 +0.2 0 or 2-M20.4 25 2-O 42 Part Number CL No. Split sleeve HMUA-8AS-3 710-0175-9 Zirconia 8-Position Adapter / Board Mounting 26 12.7 MU-8A BBoard Mounting Pattern JAPAN 40.60.1 5 6 3 4 5 6 8 4 2 7 3 1 8 2 7 1 12.70.1 9 4-O2.40.1 5 4.5 40.6 42 12 Board thickness: 1.6mm Part Number CL No. Split sleeve HMUA-8AH-3 710-0176-1 Zirconia Cost effective adapters 8-Position Adapter / Screw Panel Mounting 50.5 46.5 40.5 5 4.5 2.5 26 1.8 9.8 2-O2.3 BPanel Cutout 10.1 +0.3 0 2-O2.4+0.2 0 or 2-M20.4 40.6 +0.2 0 46.50.1 Panel thickness:1.6mm Part Number CL No. Split sleeve HMUA-8A-2 710-0155-1 Zirconia HMUA-8A-B2 710-0119-8 Copper alloy 16-Position Adapter / Screw Panel Mounting 90 86 80 2-O2.3 B 9 7 5 3 B 9 7 5 3 1.2 1.8 1.6 1 8.6 D D 1 F 9.8 6.6 F 5 4.5 2.5 26 JAPAN MU-16A BPanel Cutout 80.1+0.2 0 860.1 0 1.2 -0.3 8.7 0 1.6 -0.3 +0.2 0 10.1+0.3 0 6.7 +0.2 0 2- O2.4+0.2 0 or 2-M20.4 Panel thickness:1.6mm Part Number CL No. Split sleeve HMUA-16A-2 710-0143-2 Zirconia HMUA-16A-B2 710-0113-1 Copper alloy 13 Angled Adapters BPanel Cutout Duplex Angled Adapter / Snap-in Panel Mounting 10.1+0.2 0 26 12 9.8 2. 7 1 1 11.8 2 4.5 2 17.8 +0.2 0 (40 ) Panel thickness: 2.5mm Part Number CL No. Split sleeve Mounting Angle HMUA-2A-40-4 710-0177-4 Zirconia 40 BPanel Cutout 4-Position Angled Adapter / Snap-in Panel Mounting 10.1 +0.2 0 35 12 9.8 1 1 2 2 1 1 (40 2. 7 ) 22.5 31.8+0.2 0 2 4.5 2 26 26 Panel thickness: 2.5mm 14 Part Number CL No. Split sleeve Mounting Angle HMUA-4A-40-4 710-0178-7 Zirconia 40 Backpanel side Connector Housings BPanel Cutout Duplex Backpanel side Connector Housing 4-R0.8 max. 18.9 1 L2HA 9.8 13.2 6.2 7.710.1 (2-R1) 18.590.15 12.20.1 8.2 0.1 17.8 15.24 4.5 JAPAN 2 11.890.1 8.39+0.2 0 12.3 Part Number CL No. Panel thickness HMUB-L2HA-1 710-0017-8 2.4mm HMUB-L2HB-1 710-0018-0 3.2mm (2-R1) Note: Screw fastening torque: 0.03Nm BPanel Cutout 8-Position Backpanel side Connector Housing 11.890.1 8.39 +0.2 0 (4-R1) 8-R0.8 max. 7 41.5 5 4 3 4-3.35+0.2 0 2 1 9.8 13.2 6.2 27.94 0.1 37.6 +0.2 0 6 L8AH 37.3 27.94 4.5 8 12.3 Part Number CL No. Panel thickness HMUB-L8HA-1 710-0019-3 2.4mm HMUB-L8HB-1 710-0020-2 3.2mm Note: Screw fastening torque: 0.03Nm 15 Package side Connector Housings Duplex Package side Connector Housing 5.08 0.1 13.85 5.08 23.3 O2.1 0.1 12.7 18.7 4 pieces attached Note : Screw fastening torque : 0.15Nm O3.2 0.1 4 pieces attached 1.8 710-0015-2 10.5 HMUB-L2PA-1 12.7 0.1 L2PA CL No. JAPAN Part Number 8.61 0.05 9 BBoard Mounting Pattern M20.4 M20.4 8-Position Package side Connector Housing 36.45 5.08 23.3 O2.10.1 39.37 42.9 39.370.1 Note : Screw fastening torque : 0.15Nm O3.2 0.1 4 pieces attached 1.8 710-0016-5 10.5 HMUB-L8PA-1 L8PA CL No. JAPAN 4 pieces attached Part Number 5.080.1 8.610.05 9 BBoard Mounting Pattern M20.4 M20.4 Sleeve Holder 8 O3.52 O2.59 3.75 Gold plated section Part Number CL No. Split sleeve HMUB-SH-1 710-0021-5 Zirconia Note:This Sleeve Holder should be used for duplex and 8-position package side connector housing and J Plug Housing connector plug. Insert the Sleeve Holder using dedicated tool #HMUB-TS-1. The gold plated section of the Sleeve Holder should be inserted into the package side connector housing. 16 J Plug Housing Simplex J Plug Housing for 0.9mm fiber 3.7 4.75 3 15 28 Part Number CL No. Boot color HMUAJ-P0.9-H1(01) 710-0160-1-01 Blue HMUAJ-P0.9-H2(01) 710-0161-4-01 Light purple 17 Simplified Receptacles Simplex Simplified Receptacle / Screw Panel Mounting BPanel Cutout 13.5 +0.2 0 6.9 8.5 9.9 +0.2 0 13.5 0.2 18 2-O2.4 MU SR JAPAN 11.8 4 2- O2.4 +0.2 0 or 2-M20.4 CL No. Split sleeve 710-0094-9 Zirconia HMUA-SR-B1 710-0182-4 Copper alloy 2.5 20.5 Part Number HMUA-SR-11 8.2 6.6 8-position Simplified Receptacle / Screw Panel Mounting BPanel Cutout 1 3 5 7 8.4 +0.2 0 9.8 MU 8SR 2-O2.4+0.2 0 or 2-M20.4 2-O2.4 1 3 5 7 5 4.5 JAPAN 39.1 +0.2 0 43.90.1 8.2 Part Number 18 CL No. Split sleeve HMUA-8SR-2 I 710-0172-0 Zirconia HMUA-8SR-B2 710-0146-0 Copper alloy 20.5 3 7 8 43.9 48.9 38.9 8-position Simplified Receptacle - for extremely high density applications 5 3 1 5 3 1 9.8 7 7 5 4.5 2.2 9 20.5 7 41 42.3 38.9 8.2 Part Number CL No. Split sleeve HMUA-8SR-3 I 710-0168-3 Zirconia HMUA-8SR-B3 710-0117-2 Copper alloy 16-Position Simplified Receptacle - for extremely high density applications 5 3 1 5 3 1 9.8 7 7 B B 9 D D 9 F F 5 4.5 6.5 80.5 81.8 2.2 9 20.5 7 78.4 8.2 Part Number CL No. Split sleeve HMUA-16SR-55 710-0173-3 Zirconia HMUA-16SR-B5 710-0122-2 Copper alloy BMounting Example a 19 3 Simplex simplified Plug for 0.9mm fiber OA+0.001 0 (Hole diameter) O1.2490.0005 Simplified Plug 2 3 5.75+0.05 0 13.75 Part Number CL No. A dimension HMUA-FK-A125(04) 710-0099-2-04 0.1255 HMUA-FK-A1255(04) 710-0107-9-04 0.1255 HMUA-FK-A126(04) 710-0100-0-04 0.1265 Ferrule Applicable Fiber cable Zirconia SM, MM Split Sleeve 0 6.8 -0.1 Part Number CL No. HMUA-D(01) Split sleeve 710-0147-3-01 Zirconia HMUA-SLIT-SLEEVE(01) 710-0130-0-01 Copper alloy 20 20 Part Number CL No. HMUA-FK-T3 710-0148-6 2.15 5 3.1 Extraction Tool for Simplified Plug 3.25 Attachment for Simplex Receptacle HRPI-R-L Insert straight the MU-RA type receptacle attachment and tighten the screw. O1.25 O2.5 O6 O4.4 14.1 M50.5 Part Number CL No. HMUA-RA-1 710-0014-0 For optical power (or other measurements) join the Receptacle Attachment using the tool HRPI-R-L and attach to a sensor or measuring instrument. Dust Caps Dust Cap for Backpanel side connector housings 4.35 6.2 5.6 6.6 2.4 3.95 23.6 Part Number CL No. Applicable connector HMUB-DP-1 710-0135-4 Back panel side housing 4 JAPAN MUDJ O6 O4.4 O2.55 Dust Cap for Package side connector housings 21.6 Part Number CL No. HMUB-DJ-1 710-0060-7 Applicable connector housing HMUB-L2PA-1 HMUB-L8PA-1 Dust Cap for Adapters 4.35 6.2 5.6 6.6 2.4 3.95 23.6 Part Number CL No. Applicable connector HMUA-DP-2 710-0131-3 Adapter, simplified receptacle 21 Cable assemblies Simplex Plug Cable assembly Part Number CL No. Connector Installation End HMUA-ASP1-F3Q-L 710-0028-4 One end HMUA-ASP2-F3Q-L 710-0029-7 Both ends HMUA-ASP1-F3P-L ----- One end HMUA-ASP2-F3P-L 710-0052-9 Both ends Applicable Fiber cable Polishing type Cable Diameter AdPC O2mm Polishing type Cable Diameter AdPC O2mm SM-9.5/125 GI-50/125 Duplex Plug Cable assembly Part Number CL No. Connector Installation End HMUA-AS2P1-F3QW-L ----- One end HMUA-AS2P2-F3QW-L 710-0062-2 Both ends HMUA-AS2P1-F3PW-L ----- One end HMUA-AS2P2-F3PW-L 710-1019-9 Both ends Applicable Fiber cable SM-9.5/125 GI-50/125 Note 1: The "L" within the Part Number indicates the length of the cable illustrated the drawings. Please specify "L" in mm. Note 2: Please contact HIROSE for other specifications. 22 Simplex Plug Cable assembly L+10 0 % L +10 0 % Part Number CL No. Connector Installation End HMUA-ASPH1-F3L-L 710-1051-1 One end HMUA-ASPH2-F3L-L 710-1052-4 Both ends HMUA-ASPH1-F3M-L 710-1053-7 One end HMUA-ASPH2-F3M-L 710-1054-0 Both ends Applicable Fiber cable Polishing type Cable Diameter AdPC O0.9mm Polishing type Cable Diameter AdPC O0.9mm SM-9.5/125 GI-50/125 Duplex Plug cable assembly L+10 0 % L+10 0 % Part Number CL No. Connector Installation End HMUA-AS2PK1-F3L-L 710-1055-2 One end HMUA-AS2PK2-F3L-L 710-1056-5 Both ends HMUA-AS2PK1-F3M-L 710-1057-8 One end HMUA-AS2PK2-F3M-L 710-1058-0 Both ends Applicable Fiber cable SM-9.5/125 GI-50/125 Note 1: The "L" within the Part Number indicates the length of the cable illustrated the drawings. Please specify "L" in mm. Note 2: Please contact HIROSE for other specifications. 23 Simplex J Plug cable assembly Part Number CL No. Connector Installation End HMUAJ-ASP1-F3Q-L 710-0040-0 One end HMUAJ-ASP2-F3Q-L 710-0041-2 Both ends HMUAJ-ASP1-F3P-L ----- One end HMUAJ-ASP2-F3P-L ----- Both ends Applicable Fiber cable Polishing type Cable Diameter AdPC O2mm Polishing type Cable Diameter AdPC O0.9mm SM-9.5/125 GI-50/125 Simplex J Plug cable assembly L+10 0 % L+10 0 % Part Number CL No. Connector Installation End HMUAJ-ASPJ1-F3L-L 710-1059-3 One end HMUAJ-ASPJ2-F3L-L 710-1060-2 Both ends HMUAJ-ASPJ1-F3M-L 710-1061-5 One end HMUAJ-ASPJ2-F3M-L 710-1062-8 Both ends Applicable Fiber cable SM-9.5/125 GI-50/125 Note 1: The "L" within the Part Number indicates the length of the cable illustrated the drawings. Please specify "L" in mm. Note 2: Please contact HIROSE for other specifications. 24 Tools Insertion / Extraction Tool for Plug Part Number CL No. Color of Tip Remarks HMUA-TP-1 710-0074-1 Blue For Conventional Adapters HMUB-TP-1 710-0075-4 Brown For MU Backplane system Insertion / Extraction Tool for Plug Cost effective type Part Number CL No. HMU/HEMD-B ----- Extraction Tool for J Plug Part Number CL No. HMUB-TJ-1 710-0076-7 Insertion / Extraction Tool for Sleeve Holder Part Number CL No. HMUB-TS-1 710-0077-0 25 Crimp Tools Part Number CL No. Applicable plug housing HMUA-TK-1 ----- Part Number CL No. Applicable plug housing HMUA-TK-2 ----- HMUAJ-P2-H2,H1 Part Number CL No. Applicable connector HMUA.J/PR-MD 902-6019-8 MU plug housings except HMUA-P1.1-H2 HMUA-P2-H2,H1 HMUA-2P2-H2,H1 Stop Ring Insertion Tool 26