TECH. CORP. SPECIFICATIONS CUSTOMER : CUS999 SAMPLE CODE : SH240320T-037-L09Q MASS PRODUCTION CODE : PH240320T-037-L09Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 001 DRAWING NO. (Ver.) : JLMD- PH240320T-037-L09Q (Ver.001) PACKAGING NO. (Ver.) : - Customer Approved POWERTIP 2009.09.03 Date: JS RD APPROVED Approved Checked Designer Ryan Yan Lori Liu Bob Hu Preliminary specification for design input Specification for sample approval POWERTIP TECH. CORP. Headquarters: No.8, 6th Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: sales@powertip.com.tw FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 407 8 NO.PT-A-005-8 History of Version Date 9/2/2009 Ver. Edi. 01 001 Description Page Design by New Drawing - Bob Total: 25 Page PH240320T-037-L09Q Page2 SAMPLE Ver. 01 SPEC Edi.001 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight & LED Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart 3.2 Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 5.2 5.3 5.4 Safety Handling Storage Terms of Warranty AppendixLCM Drawing PH240320T-037-L09Q Page3 SAMPLE Ver. 01 SPEC Edi.001 1. SPECIFICATIONS 1.1 Features Main LCD Panel Item Standard Value Display Type 240 * (RGB) * 320 Dots LCD Type a-Si TFT , Normally white TN mode , Transmissive Screen size(inch) 2.8 (Diagonal) Viewing Direction 12 O'clock Color configuration R.G.B. vertical stripe Backlight White LED Interface 8/16-bit 80-system I/F Driver IC R61580 ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web side : http://www.powertip.com.tw/news/LatestNews.asp 1.2 Mechanical Specifications Item Standard Value Unit Outline Dimension 50.0 (W) * 69.2 (L) * 3.05 (H)(Max.) mm Item Standard Value Unit Viewing Area 44.8 (W) * 59.2 (L) mm Active Area 43.2(W) * 57.6 (L) mm LCD Panel Note : For detailed information please refer to LCM drawing PH240320T-037-L09Q Page4 SAMPLE Ver. 01 SPEC Edi.001 1.3 Absolute Maximum Ratings Module Item Symbol Condition Min. Max. Unit Power Supply Voltage VCC - -0.3 +4.6 V -0.3 +30.0 V VGH-VGL System Power Supply Voltage 1.4 GND-VGL - -18.5 +13.0 V Input Voltage VIN - -0.3 VCC +0.3 V Operating Temperature TOP - -20 +70 C Storage Temperature TST - -30 +80 C Storage Humidity HD Ta < 40 C 20 90 %RH DC Electrical Characteristics Module GND = 0V, Ta = 25C Item Symbol Condition Min. Typ. Max. Unit Power Supply Voltage VCC - - 3.3 - V Input High Voltage VIH - 0.8*VCC - VCC V Input Low Voltage VIL - -0.3 - 0.2* VCC V Output High Voltage VOH IOH = -0.1mA 0.8*VCC - - V Output Low Voltage VOL IOL = 0.1mA - - 0.2* VCC V Supply Current ICC TBD TBD TBD mA VCC =3.3V, Pattern=Full display *1 Note1:Maximum current display PH240320T-037-L09Q Page5 SAMPLE Ver. 01 SPEC Edi.001 1.5 Optical Characteristics TFT LCD Panel VCC =3.3V, Ta=25C Item Symbol Condition Min. Typ. Max. unit Response time Tr + Tf Ta = 25C X, Y = 0 - 45 68 ms Note2 TBD TBD TBD TBD TBD TBD TBD TBD TBD 50 45 50 50 TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD Deg. Note4 - Note3 - Note1 TBD TBD TBD Top Bottom Viewing angle Left Right Contrast ratio White Color of CIE Coordinate (With B/L) Red Green Blue Average Brightness Pattern= white (With B/L) Y+ YXX+ CR X Y X Y X Y X Y IV CR 10 Ta = 25C X , Y = 0 IF= 80mA cd/m2 Note1 Note1: 1B=B(min) / B(max) x100% 2Measurement Condition for Optical Characteristics: aEnvironment: 255 / 6020%R.Hno winddark room below 10 Lux at typical lamp current and typical operating frequency. bMeasurement Distance: 500 50 (= 0) cEquipment: TOPCON BM-7 fast(field 1)after 10 minutes operation. dThe uncertainty of the C.I.E coordinate measurement 0.01Average Brightness 4% 1 2 3 VIEW AREA 6 5 4 7 8 9 500 LCM Colorimeter=BM-7 fast PH240320T-037-L09Q Page6 SAMPLE Ver. 01 SPEC Edi.001 Note2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from "black" to "white"(falling time) and from "white" to "black"(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: "White" "Black" "White" Signal (Relative value) 100% 90% 10% 0% Tr Tf Note3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at "White" state Contrast ratio (CR) = Photo detector output when LCD is at "Black" state Note4: Definition of viewing angle: Refer to figure as below: X = Y = 0 12H = 180 = 270 X - = 90 X- Y- Y+ Y + = 90 Y+ X- X+ = 90 X + = 90 X+ Y6H =0 Y - = 90 PH240320T-037-L09Q Page7 SAMPLE Ver. 01 SPEC Edi.001 1.6 Backlight & LED Characteristics Maximum Ratings Item Symbol Conditions Min. Max. Unit Forward Current IF Ta =25 - 120 mA Reverse Voltage VR Ta =25 - 5 V Power Dissipation PD Ta =25 - 430 mW Electrical / Optical Characteristics Item Symbol Forward Voltage Average Brightness ( without LCD) Color of CIE Coordinate (without LCD ) Conditions Min. Typ. Max. Unit VF - 3.3 - V IV 250 300 - cd/m2 X 0.26 0.28 0.32 Y 0.26 0.28 0.32 IF= 80mA Color PH240320T-037-L09Q - White Page8 SAMPLE Ver. 01 SPEC Edi.001 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PH240320T-037-L09Q Page9 SAMPLE Ver. 01 SPEC Edi.001 2.2 Interface Pin Description Pin No. 1 2 Symbol LEDK1-4 Power supply for LED Backlight Cathode input 3.3V/LEDA Power supply for LED Backlight Anode input 3 GND 4 RESET 5 DB17 6 DB16 7 DB15 8 DB14 9 DB13 10 DB12 11 DB11 12 DB10 13 DB8 14 DB7 15 DB6 16 DB5 17 DB4 18 DB3 19 DB2 20 DB1 21 RD 22 Function Signal ground.(0V) Reset input pin for TFT LCD. When RESET is "L", initialization is executed. Bi-directional data bus Read signal inputactive at Low. WR/SCL Write signal inputactive at Low. 23 RS When RS = 0: Command. 24 CS Chip select signal , Active at "L" 25 XR/X+ PH240320T-037-L09Q When RS = 1: Display data. NC Page10 SAMPLE Ver. 01 SPEC Edi.001 Pin No. Symbol 26 YD/Y- 27 XL/X- 28 YU/Y+ 29 GND 30 3.3/VCC PH240320T-037-L09Q Function NC Signal ground.(0V) Power supply for the internal logic circuit. Page11 SAMPLE Ver. 01 SPEC Edi.001 2.3 Timing Characteristics PH240320T-037-L09Q Page12 SAMPLE Ver. 01 SPEC Edi.001 PH240320T-037-L09Q Page13 SAMPLE Ver. 01 SPEC Edi.001 PH240320T-037-L09Q Page14 SAMPLE Ver. 01 SPEC Edi.001 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactur ing Q.A Product control Purchase Inventory control Survey Request Project evaluation Inquiry Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification OK Sample approval NG Pilot Pilot Run & Mass Product NG PH240320T-037-L09Q run & Reliability test Verification OK Specification preparation Mass production OK Ship Out OK Inspection NG Shipment Ship out Page15 SAMPLE Ver. 01 SPEC Edi.001 Item Customer Sales Info Claim R&D Q.A Manufactu Product ring control Purchase Inventory control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PH240320T-037-L09Q 2. Process improvement proposal 4. Education And Training Activities Page16 SAMPLE Ver. 01 SPEC Edi.001 3.2 Inspection Specification PH240320T-037-L09Q Page17 SAMPLE Ver. 01 SPEC Edi.001 PH240320T-037-L09Q Page18 SAMPLE Ver. 01 SPEC Edi.001 PH240320T-037-L09Q Page19 SAMPLE Ver. 01 SPEC Edi.001 PH240320T-037-L09Q Page20 SAMPLE Ver. 01 SPEC Edi.001 PH240320T-037-L09Q Page21 SAMPLE Ver. 01 SPEC Edi.001 PH240320T-037-L09Q Page22 SAMPLE Ver. 01 SPEC Edi.001 PH240320T-037-L09Q Page23 SAMPLE Ver. 01 SPEC Edi.001 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test Keep in +80 2 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 2 Low Temperature Storage Test Keep in -30 2 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 3 High Temperature / High Humidity Storage Test Keep in +60 / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer & T/P) ESD Test Air Discharge: Contact Discharge: (include mobile phone) (include mobile phone) Apply 2 KV with 5 times Apply 250V with 5 times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance:1535 2. Humidity relative:30%60% 3. Energy Storage Capacitance(Cs+Cd):150pF10% 4. Discharge Resistance(Rd):33010% 5. Discharge, mode of operation: Single Discharge (time between successive discharges at least 1 s) (Tolerance if the output voltage indication: 5%) Temperature Cycling Storage Test -20 +25 +70 +25 (30mins) (30mins) (30mins) (30mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. 4 5 TEST CONDITION 1. Sine wave 1055 Hz frequency (1 min) 6 Vibration Test (Packaged) 2. The amplitude of vibration :1.5 mm 3. Each direction (XYZ) duration for 2 Hrs Packing Weight (Kg) 7 Drop Test (Packaged) Drop Height (cm) 0 ~ 45.4 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop direction : 1 corner / 3 edges / 6 sides each 1times PH240320T-037-L09Q Page24 SAMPLE Ver. 01 SPEC Edi.001 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI--When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully, do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320 10C and 3-5 sec. To avoid liquid (include organic solvent) stained on LCM 5.3 STORAGE 5.3.1 5.3.2 5.3.3 Store the panel or module in a dark place where the temperature is 25C 5C and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company's specification as a part for use in your company's general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in nuclear power control equipment, aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PH240320T-037-L09Q Page25 SAMPLE Ver. 01 SPEC Edi.001