M4] CSDDIFR f ) CHARACTERISTICS + PARAMETER MIN TYP MAX UNITS REMARKS C tg C,) SUPPLY VOLTAGE 4.5 24 VOLTS | -25C to 85C SUPPLY CURRENT 16 22 mA OUTPUT CURRENT 40 mA OUTPUT VOLTAGE 25 VOLTS | SINKING 40 mA @ 25C 800 2.004 TEMPERATURE 25 25 B5 C SUPPLY TRANSIENT (Vv) | 40 80 VOLTS | 250 ms DURATION 1.200 2.004 - SUPPLY TRANSIENT (1) | .5 5 AMPS 15 micros DURATION OPERATE CURRENT 46.54 | 54.12 | 61.70 | NI @ 25C SUGGESTED HOLE CENTERS RELEASE CURRENT 35.36 NI e 25C SCALE 4:1 125.002 B (4) 040 @ (3) 100 (2) i 1.350 MAX e 990 MAXe~ + 430 MIN 2 ~|.410 MAX oO * TOROID WITH AIR GAP | : - - + 150 MIN : HALL SENSOR Se A v1 | 3 pe AN Ly / | oO 2 ' 1.40 MAX xv x 104 (2) a ag Le: { TL 40 (2) = .060 MAX FOO: L_| 12 [ =O- im 140 (2) \ | | 5 CJ o A- De | nd = % <f -Ot ' z a ~ | ae .125 (2) S$ 1. 2. 0Q-____r~ =_ 264 (2) = CQ Lee 3 }(() _> < NOTES a 1 AIR GAP IN TOROID IS .Q75 ae 2 GAUSS LEVEL IN AIR GAP IS 6.0 TO 7.0 GAUSS B| 9, PER NI oH 3 RECOMMENDED MOUNTING |S 4-40 SQUARE NUT AND .375 LONG 4-40 SCREW CONVENTIONAL CURRENT FLOW IN DIRECTION INDICATED ) 142.003 GREATER THAN THE OPERATE POINT WILL SWITCH THE LOCATION PINS (2) OUTPUT TO THE LOW STATE | | A C8 , a 0 [2 * mM | = THIRD ANGLE PROJECTION w | @ + x SCALE 2:1 | z DO NOT SCALE PRINT o| UNLESS OTHERWISE SPECIFIED o TOLERANCES ARE o& CAUTION THIS DRAWING COVERS A PROPRIETARY ITEM AND IS THE PROPERTY GF MICRO SWITCH. A DIVISION OF = 0 ETE A HONEYWELL. THIS ORAWING |S NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF MICRO SWITCH, ONE PLACE (.0) +030 <2 austen Ata STL OE STINE TWO PLACES (OO) +.015 Li | 2) EES ESD ee | | RICRO SWITCH CSDDIFR THREE PLACES (000) +.005 5 | | a Honeywell Division CURRENT SENSOR ANGLES + rr MASTER REDUCED ED. Ee. CODE alae WE |GHT