SmartMotion Platform (R) by InvenSense(R) DK-42605 Development Kit for ICM-42605 6-Axis Motion Sensor Overview Key Features The DK-42605 is a comprehensive development platform for ICM42605, a high performance 6-axis motion sensor that combines a 3-axis gyroscope, and a 3-axis accelerometer. * ICM-42605 6-axis motion sensor * Microchip G55 MCU with 512KB Flash * On-board embedded debugger for programming and debugging The platform, designed around Microchip G55 MCU can be used by developers for rapid evaluation and development of ICM-42605 based solutions. The DK-42605 includes an on-board Embedded Debugger so external tools are not required to program or debug the G55 MCU. * USB connectors for host interface to support software debug and sensor data logging * Board power supply through USB * Sensor Fusion * Accelerometer & Gyroscope calibration * Android Functions: Game Rotation Vector, Gravity, Linear Acceleration * Pedometer Functions: Step Detection and Step Count * Gestures: Tap, Tilt, Raise to Wake/Sleep The development kit comes with necessary software including InvenSense Motion Link, a GUI based development tool and embedded Motion Drivers for ICM-42605. Embedded Motion Drivers (eMD) consists of a set of APIs to configure various aspects of the platform including ICM-42605 sensor parameters such as full-scale range (FSR), output data rate (ODR), low-power or low-noise mode, and sensor interface to host (I3CSM, I2C, SPI). MotionLink is a GUI based development tool included with the platform. It can be used to capture and visualize the sensor data from the motion sensor. invensense.com/smartmotion-platform