3
33
3
Optical Components
Specialty Fiber Products
820 nm High Numerical Aperture Single-Mode Optical Fiber
Part Number: FS-SC-4314 Stock Number: 80-6104-5229-6
October 2001
Supersedes January 1997
Product Applications Interferometric Sensors
- Fiber Optic
- Hydrophones
Communciation Systems
- Laser Packaging and Pigtailing
EDFA Construction
- 980/1550 nm WDM Fabrication
- EDFA Gain Fiber Pigtailing
Device Fabrication
Features and Benefits High numerical aperture reduces sensitivity to induced macrobend loss when
deployed on small diameter coils.
80 um reduced diameter allows for high density fiber packaging and reduced coil
sizes.
High index of refraction, mode stripping coating reduces microbend sensitivity.
Easy to remove single layer acrylate coating simplifies fiber preparation steps in
pigtailing and fabrication.
Typical Fiber Characteristics Value Units
Operating Wavelength: 820 nm
Second Mode Cutoff Wavelength: <780 nm
Mode Field Diameter at Operating Wavelengtha:4.3 +/- 0.5 um
Maximum Attenuation at Operating Wavelength: 5.0 dB/km
Typical Attenuation at Operating Wavelength: 3.0 dB/km
Nominal Numerical Aperture: 0.16
Minimum Optical Bend Diameter: 12 mm
Cladding Diameter: 80 +/- 2.0 um
Maximum Core-to-Clad Offset: 1.0 um
Coating Style: Single Coat
(acrylate)
Outer Primary Buffer Coating Diameter: 200 +/-15 um
Minimum Mechanical Bend Diameter: 16 mm
Proof Test Level d:100 kpsi
Operating Temperature Range: -55 to 85 C
a The Mode Field Diameter is measured at the operating wavelength per EIA/TIA-455-167A and reported as the Petermann II result.
d Fiber at higher proof levels can be provided
Contact Information For information regarding fiber and fiber grating products from 3M Optical Components
please contact 3M Optical Components Customer Service Representative at the number below:
1-866-474-9029
OR, view our web site at:
www.3m.com/fibers
Important Notice All statements, technical information and recommendations related to 3M’s products are based on
information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using
this product, you must evaluate it and determine if it is suitable for your intended application. You
assume all risks and liability associated with such use. And statements related to the product which
are not contained in 3M’s current publications, or any contrary statements contained on your purchase
order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer
of 3M.
Warranty; Limited
Remedy; Limited
Warranty
This product will be free from defects in material and manufacture for a period of one (1) year from
the date of purchase. 3M MAKES NO OTHER WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss
or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential
regardless of the legal theory asserted.
