NICKEL CADMIUM BATTERIES: INDIVIDUAL DATA SHEET P-100AASJ/B P-100AASJ/FT AA size (KR15/51) Type: S Typical Charge Characteristics ~ Dimensions (with tube) (mm) 15 Charge: TOUMALO.1tx 1Shre = i oi ao Sia 14.533; S iz oN 44 (+) (+) 10 qs a 2 4 6 4 0 tt 4 #1 18 ( } Charge Time (hours) P-100AASJ P-100AASJ/FT 50.0240 *8 Charge: 1O00mAL1Ii}x. 1. Sirs, bd 10C 16 > V5 o 14 , $ 12 . __ Vt 1 (-) (-) 60 80 100 120 oO 2th 40 2 Specifications Charge Time (minutes) mm Inch Diameter 14.5 +0/-0.7 0.57 +0/-0.03 Height 50.0 +0/-1.0 1.97 +0/-0.04 Typical Discharge Characteristics Approximate Grams Ounces Weight 239g 0.81 Nominal Voltage 1.2V Charge 1OGMmALtIbx 1.5hre:, 20C 6 Discharge Temperature: 20C Discharge Average" 1080mAh 15 Capacity Rated (Min.) 1000mAh =i o Approx. Internal impedance at 17m2 Bn : 1000Hz at charged state Sy, Standard 1O0MA (0.11t) x 16 hrs. Charge 10 Rapid*** 1000mA (1It) x 1.5 hrs. 09 2h Cc oF 08 : Standard 0 1 2 a 4 5 6 7 8 9 9 : : ; ; < 5 Charge O'C to 45C | 32F to 113F Discharge Time (hours) o Rapid 10C to 40C | 50F to 104F Oo . : B E 2 Discharge -20'C to 65C | -4F to 149F <3 <2 years -20C to 35C | -4Fto S5'F | Storage . ; ; Battery performance and cycle life are strongly affected by how they : are used. In order to maximize battery safety, please consult Panasonic 2 8 when determining charge / discharge specs, warning label contents and 5 12 unit design. m4 Note: [It] was previously expressed as [C]. [It] is an IEC standard expression 1 for ihe amount of charge or discharge current and is expressed as: td (2h) I(A) = Cn (Ah)/th. 0.8 o i 2 so 4 50 60 70 8 [It] is the reference test current in ampres [Cn] is the rated capacity of the cell or battery in Ampere-hours. n = the time base (hours) for which the rated capacity is declared Discharge Time (minutes) Panasonic NICKEL CADMIUM HANDBOOK, PAGE 46 AUGUST 2003