2016 Microchip Technology Inc. DS50002497A
High-Frequency Clock Source
Evaluation Board
User’s Guide
DS50002497A-page 2 2016 Microchip Technology Inc.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights unless otherwise stated.
Note the following details of the code protection feature on Microchip devices:
• Microchip products meet the specification contained in their particular Microchip Data Sheet.
• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
• Microchip is willing to work with the customer who is concerned about the integrity of their code.
• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
QUALITY MANAGEMENT S
YSTEM
CERTIFIED BY DNV
== ISO/TS 16949 ==
Trademarks
The Microchip name and logo, the Microchip logo, AnyRate,
dsPIC, FlashFlex, flexPWR, Heldo, JukeBlox, KeeLoq,
KeeLoq logo, Kleer, LANCheck, LINK MD, MediaLB, MOST,
MOST logo, MPLAB, OptoLyzer, PIC, PICSTART, PIC32 logo,
RightTouch, SpyNIC, SST, SST Logo, SuperFlash and UNI/O
are registered trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
ClockWorks, The Embedded Control Solutions Company,
ETHERSYNCH, Hyper Speed Control, HyperLight Load,
IntelliMOS, mTouch, Precision Edge, and QUIET-WIRE are
registered trademarks of Microchip Technology Incorporated
in the U.S.A.
Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut,
BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM,
dsPICDEM.net, Dynamic Average Matching, DAM, ECAN,
EtherGREEN, In-Circuit Serial Programming, ICSP, Inter-Chip
Connectivity, JitterBlocker, KleerNet, KleerNet logo, MiWi,
motorBench, MPASM, MPF, MPLAB Certified logo, MPLIB,
MPLINK, MultiTRAK, NetDetach, Omniscient Code
Generation, PICDEM, PICDEM.net, PICkit, PICtail,
PureSilicon, RightTouch logo, REAL ICE, Ripple Blocker,
Serial Quad I/O, SQI, SuperSwitcher, SuperSwitcher II, Total
Endurance, TSHARC, USBCheck, VariSense, ViewSpan,
WiperLock, Wireless DNA, and ZENA are trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
Silicon Storage Technology is a registered trademark of
Microchip Technology Inc. in other countries.
GestIC is a registered trademarks of Microchip Technology
Germany II GmbH & Co. KG, a subsidiary of Microchip
Technology Inc., in other countries.
All other trademarks mentioned herein are property of their
respective companies.
© 2016, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
ISBN: 978-1-5224-0646-4
2016 Microchip Technology Inc. DS50002497A-page 3
Object of Declaration: High-Frequency Clock Source Evaluation Board
HIGH-FREQUENCY CLOCK SOURCE
EVALUATION BOARD USER’S GUIDE
2016 Microchip Technology Inc. DS50002497A-page 4
Table of Contents
Preface ...........................................................................................................................5
Introduction............................................................................................................ 5
Document Layout .................................................................................................. 5
Conventions Used in this Guide ............................................................................ 6
Recommended Reading........................................................................................ 7
The Microchip Website.......................................................................................... 7
Customer Support ................................................................................................. 7
Document Revision History ................................................................................... 7
Chapter 1. Quick Start Instruction
1.1 Description ..................................................................................................... 8
1.2 Supply Voltage Setup ................................................................................... 10
1.3 Oscillator Phase Noise ................................................................................. 11
Appendix A. Schematics and Layouts
A.1 Introduction .................................................................................................. 13
A.2 Board – Schematic ....................................................................................... 14
A.3 Board – Top Silk .......................................................................................... 15
A.4 Board – Top Copper and Silk ....................................................................... 15
A.5 Board – Top Copper .................................................................................... 16
A.6 Board – Bottom Copper ............................................................................... 16
A.7 Board – Bottom Copper and Silk ................................................................. 17
A.8 Board – Bottom Silk ..................................................................................... 17
A.9 Board – Schematic ....................................................................................... 18
A.10 Board – Top Silk ........................................................................................ 19
A.11 Board – Top Copper and Silk ..................................................................... 19
A.12 Board – Top Copper .................................................................................. 20
A.13 Board – Bottom Copper ............................................................................. 20
A.14 Board – Bottom Copper and Silk ............................................................... 21
A.15 Board – Bottom Silk ................................................................................... 21
Appendix B. Bill of Materials (BOM)...........................................................................22
Worldwide Sales and Service ....................................................................................24
HIGH-FREQUENCY CLOCK SOURCE
EVALUATION BOARD USER’S GUIDE
2016 Microchip Technology Inc. DS50002497A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
High-Frequency Clock Source Evaluation Board. Items discussed in this chapter
include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Website
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the High-Frequency Clock Source Evaluation
Board. The manual layout is as follows:
•Chapter 1. “Qu ick Start Instruct ion ” – Important information about the
High-Frequency Clock Source Evaluation Board.
•Appendix A. “Schematics and Layouts” – Shows the schematic and layout
diagrams.
•Appendix B. “Bill of Materials (BOM)” – Lists the parts used to build the
High-Frequency Clock Source Evaluation Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ fr om those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision le vel
of the document.
For the most up-to-date information on development tools, see the MPLAB® IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
Preface
2016 Microchip Technology Inc. DS50002497A-page 6
CONVENTIONS USED IN THIS GUIDE
This manual uses the following documentation conventions:
DOCUMENTATION CONVENTIONS
Description Represents Examples
Arial font:
Italic characters Referenced books MPLAB® IDE User’s Guide
Emphasized text ...is the only compiler...
Initial caps A window the Output window
A dialog the Settings dialog
A menu selection select Enable Programmer
Quotes A field name in a window or
dialog
“Save project before build”
Underlined, Italic text with
right angle bracket
A menu path File>Save
Bold characters A dialog button Click OK
A tab Click the Power tab
N‘Rnnnn A number in verilog format,
where N is the total number of
digits, R is the radix and n is a
digit.
4‘b0010, 2‘hF1
Text in angle brackets < > A key on the keyboard Press <Enter>, <F1>
Courier New font:
Plain Courier New Sample source code #define START
Filenames autoexec.bat
File paths c:\mcc18\h
Keywords _asm, _endasm, static
Command-line options -Opa+, -Opa-
Bit values 0, 1
Constants 0xFF, ‘A’
Italic Courier New A variable argument file.o, where file can be
any valid filename
Square brackets [ ] Optional arguments mcc18 [options] file
[options]
Curly brackets and pipe
character: { | }
Choice of mutually exclusive
arguments; an OR selection
errorlevel {0|1}
Ellipses... Replaces repeated text var_name [,
var_name...]
Represents code supplied by
user
void main (void)
{ ...
}
Preface
2016 Microchip Technology Inc. DS50002497A-page 7
RECOMMENDED READING
This user’s guide describes how to use the High-Frequency Clock Source Evaluation
Board. Other useful documents are listed below. The following Microchip documents
are available and recommended as supplemental reference resources.
• MXT573ABC200M000 Data Sheet – “±2.5 ppm Stability 200 MHz
LVCMOSTCXO” (Available using the ClockWorks® Configurator software
available on the device product page)
• MCP37231- 20 0 Data Sheet – “200 Msps, 16-/ 14-Bit Low-Power ADC with
8-Channel MUX” (DS20005322)
THE MICROCHIP WEBSITE
Microchip provides online support via our website at www.microchip.com. This website is
used as a means to make files and information easily available to customers. Accessible
by using your favorite Internet browser, the website contains the following information:
•Product Support – Data sheets and errata, application notes and sample
programs, design resources, user’s guides and hardware support documents,
latest software releases and archived software
•General Technical Support – Frequently Asked Questions (FAQs), technical
support requests, online discussion groups, Microchip consultant program
member listing
•Business of Microchip – Product selector and ordering guides, latest Microchip
press releases, listing of seminars and events, listings of Microchip sales offices,
distributors and factory representatives
CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:
• Distributor or Representative
• Local Sales Office
• Field Application Engineer (FAE)
• Technical Support
Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.
Technical support is available through the website at:
http://www.microchip.com/support.
DOCUMENT REVISION HISTORY
Revision A (May 2016)
• Initial Release of this Document.
HIGH-FREQUENCY CLOCK SOURCE
EVALUATION BOARD USER’S GUIDE
2016 Microchip Technology Inc. DS50002497A-page 8
Chapter 1. Quick St art Instructi on
1.1 DESCRIPTION
The High-Frequency Clock Source Evaluation Board is an easy-to-use, high-frequency
clock source. It contains a low-noise crystal-oscillator (TCXO, single-ended output).
The oscillator requires a 3.3V supply voltage. The output is available at the SMA
connector through a bandpass filter (ADM00725) or without the filter (ADM00724).
The evaluation board is initially developed for a clock source of the Microchip
Technology’s High Speed ADC Evaluation Boards for the MCP37XXX family devices.
However, its application can expand into RF and other mixed signal applications as
well, where a low noise clock is needed.
Ta b l e 1 - 1 shows the summary of the boards that are currently available from Microchip
Technology. Figure 1-1 shows the photos of the boards.
TABLE 1-1: HIGH FREQUENCY CLOCK SOURCE EVALUATION BOARDS (Note 1)
Evaluation
Board
Part Number
Crystal Oscillator
Part Number Output
Frequency Output
Filter Descriptions
ADM00724 MXT573ABC200M000 200 MHz Not Included 200 MHz clock source
ADM00725 200 MHz Included 200 MHz clock source with
bandpass filter (Note 2)
Note 1: Contact Microchip Technology for the availability of released evaluation boards for other
frequency bands.
2: Clock source with a filter (ADM00725) is highly recommended for the applications where lower
harmonic distortion is needed.
Quick Start Instruction
2016 Microchip Technology Inc. DS50002497A-page 9
FIGURE 1-1: High-Frequency Signal Source Evaluation Boards.
(a) ADM00724: 200 MHz Signal Source Evaluation Board
(b) ADM00725: 200 MHz Signal Source Evaluat ion Board with Bandpass Filter
Output
200 MHz TCXO Oscillator
(Single-Ended Output)
3.3V Voltage Regulator
Shutdown Pin for the On-board 3.3V Regulator
Supply Volt age Connection Pin when using the On-board
3.3V Regulator. Supply Input Range: 3.8V to 5V
3.3V Supply Connec tion Pin when
bypassing the
On-board 3.3V Regulator.
Supply Selection Pin
(a) 3.3V if supply is
applied at TP3
(b) 5V if supply is
applied at TP5
Output
200 MHz Bandpass Filter
3.3V Voltage Regulator
Shutdown Pin for the On-board 3.3V Regulator
3.3V Supply
Connection Pin
when
bypassing
the On-Board
3.3V Regulator
Supply Volta ge Connection Pin when using the On-board
3.3V Regulator. Supply Input Range: 3.8V to 5V 200 MHz TCXO Oscillator
(Single-Ended Output)
Supply
Selection Pin
(a) 3.3V if supply
is applied
at TP3
(b) 5V if supply
is applied
at TP5
Quick Start Instruction
2016 Microchip Technology Inc. DS50002497A-page 10
1.2 SUPPLY VOLTAGE SETUP
Figure 1-2 shows the block diagram of the evaluation board.
Applying Supply Voltage
The oscillator requires a 3.3V supply voltage. The board includes a 3.3V regulator. The
supply voltage applied to the VIN pin (J5) is connected to the input pin of the regulator.
Note that the user can provide an exact 3.3V supply at TP3 instead of using the
on-board regulator.
Supply Voltage Option
One of the following two choices can be used.
1. When using on-board 3.3V regulator:
• Provide 3.8V to 5V supply at J5 pin (Positive) and J4 pin (Negative).
• Connect J3 Jumper to 5V
2. When providing 3.3V supply without using the on-board 3.3V regulator:
• Provide 3.3V supply at TP3 (Positive) and GND pin.
• Connect J3 Jumper to 3.3V
Once the supply voltage is applied, a clean 200 MHz LVCMOS output is available at
the SMA connector. The output impedance is controlled for 50Ω.
FIGURE 1-2: Evaluation Board Block Diagram.
TP3
(3.3V)
J5
(VIN)
200 MHz Oscillator
3.3V Regulator
200 MHz
Bandpass Filter
Supply Voltage Option
*200 MHz Filter:
ADM00725: Filter is included
ADM00724: Filter is not included
*200 MHz LVCMOS TCXO Oscillator
Output
(Single-ended output)
TP3: Use this pin when applying 3.3V directly
J5: Use this pin when VIN (3.8V to 5V) is applied
Jumper
for the 3.3V on-board regulator.
without using the on-board regulator.
When providing exact 3.3V
When using on-board 3.3V regulator
Quick Start Instruction
2016 Microchip Technology Inc. DS50002497A-page 12
FIGURE 1-4: Application Example: When the Clock Source Evaluation Board is used with the
MCP37XX0 High-Speed ADC Evaluation Board.
Clock Source
Evaluation Board
High-Speed ADC Evaluation Board
HIGH-FREQUENCY CLOCK SOURCE
EVALUATION BOARD USER’S GUIDE
2016 Microchip Technology Inc. DS50002497A-page 13
Appendix A. Schematics and Layouts
A.1 INTRODUCTION
This appendix contains the following schematics and layouts for the High-Frequency
Clock Source Evaluation Board:
ADM00724
• Board – Schematic
• Board – Top Silk
• Board – Top Copper and Silk
• Board – Top Copper
• Board – Bottom Copper
• Board – Bottom Copper and Silk
• Board – Bottom Silk
ADM00725
• Board – Schematic
• Board – Top Silk
• Board – Top Copper and Silk
• Board – Top Copper
• Board – Bottom Copper
• Board – Bottom Copper and Silk
• Board – Bottom Silk
Schematics and Layouts
2016 Microchip Technology Inc. DS50002497A-page 14
A.2 BOARD – SCHEMATIC
XO_P
11
2
3
HDR-2.54 Male 1x3
J1
3.3V
100uF
C2
0.01uF
C1
5600pF
C3
0.01uF
C4
FB2
R2
49.9
R4
0
Enable/Dis
1
Output
4
Comp Output
5
Vcc
6
N/C
2
GND
3
E
n
a
b
le/
Di
s
O
u
t
p
u
t
C
o
m
p
O
u
tp
u
t
V
cc
N/
C
G
N
D
4
2
200.000MHZ
Y1
TP3
TP1
FB1
1
1
2
3
HDR-2.54 Male 1x3
J3
VIN
VIN
1
VIN
2
SHDN
3
GND 4
PWRGD
5
CDELAY 6
SENSE 7
VOUT 8
EP 9
MCP1727/3.3V
U1
TP2
147k
0603
1%
R3
20k
0603
1%
R1
3.3V
1
HDR-2.54 Male 1x1
J5
1
HDR-2.54 Male 1x1
J4
GND GND GND GND
GND GND
1k
0402
1%
R5
CONN SMA PLUG 50 OHM EDGE MNT
J2
ADM00724
Schematics and Layouts
2016 Microchip Technology Inc. DS50002497A-page 15
A.3 BOARD – TOP SILK
A.4 BOARD – TOP COPPER AND SILK
Schematics and Layouts
2016 Microchip Technology Inc. DS50002497A-page 16
A.5 BOARD – TOP COPPER
A.6 BOARD – BOTTOM COPPER
Schematics and Layouts
2016 Microchip Technology Inc. DS50002497A-page 17
A.7 BOARD – BOTTOM COPPER AND SILK
A.8 BOARD – BOTTOM SILK
Schematics and Layouts
2016 Microchip Technology Inc. DS50002497A-page 18
A.9 BOARD – SCHEMATIC
XO_P
11
2
3
HDR-2.54 Male 1x3
J1
3.3V
100uF
C2
0.01uF
C1
5600pF
C3
0.01uF
C4
FB2
R2
49.9
R4
0
Enable/Dis
1
Output
4
Comp Output
5
Vcc
6
N/C
2
GND
3
E
n
a
b
le/
Di
s
O
u
t
p
u
t
C
o
m
p
O
u
tp
u
t
V
cc
N/
C
G
ND
4
2
200.000MHZ
Y1
TP3
TP1
FB1
11
2
3
HDR-2.54 Male 1x3
J3
VIN
VIN
1
VIN
2
SHDN
3
GND 4
PWRGD
5
CDELAY 6
SENSE 7
VOUT 8
EP 9
MCP1727/3.3V
U1
TP2
147k
0603
1%
R3
20k
0603
1%
R1
3.3V
1
HDR-2.54 Male 1x1
J5
1
HDR-2.54 Male 1x1
J4
GND GND GND GND
GND GND
1k
0402
1%
R5
CONN SMA PLUG 50 OHM EDGE MNT
J2
R6
49.9
GND
G
3
In
1
G
6
G
4
G
5
Out 2
BandPass Filter
BPF-B199+
U2
GND
ADM00725
Schematics and Layouts
2016 Microchip Technology Inc. DS50002497A-page 19
A.10 BOARD – TOP SILK
A.11 BOARD – TO P COPPER AND SILK
Schematics and Layouts
2016 Microchip Technology Inc. DS50002497A-page 20
A.12 BOARD – TOP COPPER
A.13 BOARD – BOTTOM COPPER
Schematics and Layouts
2016 Microchip Technology Inc. DS50002497A-page 21
A.14 BOARD – BOTTOM COPPER AND SILK
A.15 BOARD – BOTTOM SILK
HIGH-FREQUENCY CLOCK SOURCE
EVALUATION BOARD USER’S GUIDE
2016 Microchip Technology Inc. DS50002497A-page 22
Appendix B. Bill of Materials (BOM)
TABLE B-1: ADM00724 BILL OF MATERIALS (BOM)
Qty. Reference Description Manufacturer Part Number
2 C1, C4 Capacitor ceramic 0.01 μF
16V 10% X7R SMD 0402
KEMET C0402C103K4RACTU
1 C2 Capacitor ceramic 100 μF
6.3V 20% X5R SMD 1206
Murata Electronics®GRM31CR60J107ME39L
1 C3 Capacitor ceramic 5600 PF
50V 10% X7R 0402
Samsung Electro-Mechanics
America, Inc.
CL05B562KB5NNNC
2 FB1, FB2 Ferrite Chip 5Ω 300 MA
0402
Murata Electronics BLM15BA050SN1D
1 J1 Connector Header-2.54 male
1x3 tin lock 7.49 MH TH. ver-
tical
Molex®0022272031
1 J2 Connector SMA Plug 50Ω
Edge mount
Amphenol Commercial 132365-10
1 J3 Connector Header-2.54 male
1x3 tin 5.84 MH TH. vertical
Samtec, Inc. TSW-103-07-T-S
2 J4, J5 Connector Header-2.54 male
1x1 gold 5.97 MH TH. vert.
Samtec, Inc. TSW-101-07-L-S
1 PCB Printed Circuit Board –
High-Frequency Clock
Source Evaluation Board
Microchip Technology Inc. 04-10512
1 R1 Resistor TKF. 20 kΩ 1%
1/10W SMD 0603
Yageo Corporation 9C06031A2002FKHFT
1 R2 Resistor SMD. 49.9Ω 0.1%
1/16W 0402
Panasonic® – ECG ERA-2AEB49R9X
1 R3 Resistor TKF. 147 kΩ 1%
1/10W SMD 0603
Panasonic – ECG ERJ-3EKF1473V
1 R4 Resistor TKF. 0R 1/16W
SMD. 0402
Yageo Corporation RC0402JR-070RL
1 R5 Resistor TKF. 1 kΩ 1%
1/10W SMD. 0402
Panasonic – ECG ERJ-2RKF1001X
1 TP1 Connector TP loop black TH. Keystone Electronics Corp. 5011
1 TP2 Connector TP loop white TH. Keystone Electronics Corp. 5012
1 TP3 Connector TP loop red TH. Keystone Electronics Corp. 5010
1 U1 Micorchip Analog LDO 3.3V
MCP1727T-3302E/MF
DFN-8
Microchip Technology Inc. MCP1727T-3302E/MF
1 Y1 ±2.5 ppm Stability 200 MHz
LVCMOS TCXO
Microchip Technology Inc. MXT573ABC200M000
Note: The components listed in this Bill of Materials are representative of the PCB assembly. The
released BOM used in manufacturing uses all RoHS-compliant components.
Bill of Material s (B OM)
2016 Microchip Technology Inc. DS50002497A-page 23
TABLE B-2: ADM00725 BILL OF MATERIALS (BOM)
Qty. Ref er enc e Descriptio n Manuf actu re r Part Number
2 C1, C4 Capacitor ceramic 0.01 μF
16V 10% X7R SMD 0402
KEMET C0402C103K4RACTU
1 C2 Capacitor ceramic 100 μF
6.3V 20% X5R SMD 1206
Murata Electronics®GRM31CR60J107ME39L
1 C3 Capacitor ceramic 5600 PF
50V 10% X7R 0402
Samsung Electro-Mechanics
America, Inc.
CL05B562KB5NNNC
2 FB1, FB2 Ferrite Chip 5Ω 300MA 0402 Murata Electronics BLM15BA050SN1D
1 J1 Connector Header-2.54
male 1x3 tin lock 7.49 MH
TH. vertical
Molex®0022272031
1 J2 Connector SMA Plug 50Ω
Edge mount
Amphenol Commercial 132365-10
1 J3 Connector Header-2.54
male 1x3 tin 5.84 MH TH.
vertical
Samtec, Inc. TSW-103-07-T-S
2 J4, J5 Connector Header-2.54
male 1x1 gold 5.97 MH TH.
vertical
Samtec, Inc. TSW-101-07-L-S
1 PCB Printed Circuit Board –
High-Frequency Clock
Source Evaluation Board
Microchip Technology Inc. 04-10513
1 R1 Resistor TKF. 20 kΩ 1%
1/10W SMD 0603
Yageo Corporation 9C06031A2002FKHFT
2 R2, R6 Resistor SMD. 49.9Ω 0.1%
1/16W 0402
Panasonic® – ECG ERA-2AEB49R9X
1 R3 Resistor TKF. 147 kΩ 1%
1/10W SMD. 0603
Panasonic – ECG ERJ-3EKF1473V
1 R4 Resistor TKF. 0R 1/16W
SMD. 0402
Yageo Corporation RC0402JR-070RL
1R5 Resistor TKF. 1kΩ 1%
1/10W SMD 0402
Panasonic – ECG ERJ-2RKF1001X
1 TP1 Connector TP loop black TH. Keystone Electronics Corp. 5011
1 TP2 Connector TP loop white TH. Keystone Electronics Corp. 5012
1 TP3 Connector TP loop red TH. Keystone Electronics Corp. 5010
1 U1 Microchip Analog LDO 3.3V
MCP1727T-3302E/MF
DFN-8
Microchip Technology Inc. MCP1727T-3302E/MF
1 U2 IC Filter Band Pass. 194 TO
204 MHZ HZ1198 SMD
Mini-Circuits®BPF-B199+
1 Y1 ±2.5 ppm Stability 200 MHz
LVCMOS TCXO
Microchip Technology Inc. MXT573ABC200M000
Note: The components listed in this Bill of Materials are representative of the PCB assembly. The
released BOM used in manufacturing uses all RoHS-compliant components.
2016 Microchip Technology Inc. DS50002497A-page 24
AMERICAS
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Web Address:
www.microchip.com
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Austin, TX
Tel: 512-257-3370
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Novi, MI
Tel: 248-848-4000
Houston, TX
Tel: 281-894-5983
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Los A n ge les
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
New York, NY
Tel: 631-435-6000
San Jose, CA
Tel: 408-735-9110
Canada - Toronto
Tel: 905-673-0699
Fax: 905-673-6509
ASIA/PACIFIC
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2943-5100
Fax: 852-2401-3431
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8569-7000
Fax: 86-10-8528-2104
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
China - Dongguan
Tel: 86-769-8702-9880
China - Hangzhou
Tel: 86-571-8792-8115
Fax: 86-571-8792-8116
China - Hong K ong SAR
Tel: 852-2943-5100
Fax: 852-2401-3431
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
China - Shenzhen
Tel: 86-755-8864-2200
Fax: 86-755-8203-1760
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
ASIA/PACIFIC
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
India - Pune
Tel: 91-20-3019-1500
Japan - Osaka
Tel: 81-6-6152-7160
Fax: 81-6-6152-9310
Japan - Tokyo
Tel: 81-3-6880- 3770
Fax: 81-3-6880-3771
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Taiwan - Hsin Chu
Tel: 886-3-5778-366
Fax: 886-3-5770-955
Taiwan - Ka ohs iung
Tel: 886-7-213-7828
Taiwan - Taipei
Tel: 886-2-2508-8600
Fax: 886-2-2508-0102
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
EUROPE
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Cop e nha gen
Tel: 45-4450-2828
Fax: 45-4485-2829
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Germany - Dusseldorf
Tel: 49-2129-3766400
Germany - Karlsruhe
Tel: 49-721-625370
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Italy - Venice
Tel: 39-049-7625286
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Poland - Warsaw
Tel: 48-22-3325737
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
Sweden - Stockholm
Tel: 46-8-5090-4654
UK - Wokingham
Tel: 44-118-921-5800
Fax: 44-118-921-5820
Worldwide Sales and Service
07/14/15
