http://www.tracopower.com
Features
◆ Ultra compact, low profile plastic casing
◆ Fully encapsulated (pollution/dust)
◆ Single-, dual- and triple output models
◆ 2 package versions:
- Screw terminal block for chassis mount
- Solder pins for direct PCB mount
◆ DIN-rail mount adaptor (optional)
◆ Universal input 85-264 VAC, 47-440 Hz
◆ Protection class ll
◆ IEC/EN/UL 60950-1 approval, CB-report
◆ Over-temperature protection
◆ Protection against short circuit
and oveload
◆ 3-year product warranty
The TMP & TMPM series AC/DC Power Modules is a new range of fully encapsu-
lated power supplies in an ultra-compact casing. They feature easy chassis mount-
ing with screw terminal block connection or direct PCB mounting with solder pins.
Full compliance with International safety standards for industrial control equipment
qualifies the products for worldwide markets.
These power supplies offer a cost effective solution for many space critical applica-
tions in commercial and industrial electronic equipment and for polluted and dusty
environment.
AC/DC Power Modules
TMP & TMPM Series, 4 to 60 Watt
Page 1 of 9
15 to 60 Watt and multi output models see next page -->
CB
Scheme UL 508UL 60950-1
Order code Output power max. Output Efficiency
PCB-mount with solder pins typ.
TMPM 04103 3.3 VDC / 1200 mA 70 %
TMPM 04105 5.0 VDC / 800 mA 72 %
TMPM 04109 9.0 VDC / 444 mA 75 %
TMPM 04112 4 W 12 VDC / 333 mA 76 %
TMPM 04115 15 VDC / 267 mA 76 %
TMPM 04124 24 VDC / 167 mA 77 %
TMP 07103 4.6 W 3.3 VDC / 1400 mA 70 %
TMP 07105 5.0 VDC / 1400 mA 73 %
TMP 07112 7 W 12 VDC / 583 mA 78 %
TMP 07115 15 VDC / 466 mA 78 %
TMP 07124 24 VDC / 291 mA 78 %
TMPM 10103 8.3 W 3.3 VDC / 2500 mA 70 %
TMPM 10105 5.0 VDC / 2000 mA 72 %
TMPM 10112 10 W 12 VDC / 833 mA 76 %
TMPM 10115 15 VDC / 667 mA 75 %
TMPM 10124 24 VDC / 417 mA 72 %
TMP 10103 6.6 W 3.3 VDC / 2000 mA 70 %
TMP 10105 5.0 VDC / 2000 mA 73 %
TMP 10112 10 W 12 VDC / 833 mA 76 %
TMP 10115 15 VDC / 666 mA 76 %
TMP 10124 24 VDC / 416 mA 76 %
Single Output Models 4 to 10 Watt
Small footprint
Low profile
http://www.tracopower.com
AC/DC Power Modules
TMP & TMPM Series 4 to 60 Watt
Page 2 of 9
Order code Output power max. Output Efficiency
PCB-mount with solder pins Chassis mount,
screw
terminal
typ.
TMP 15105 TMP 15105C 5 VDC / 3000 mA 75 %
TMP 15112 TMP 15112C 12 VDC / 1250 mA 79 %
TMP 15115 TMP 15115C 15 W 15 VDC / 1000 mA 79 %
TMP 15124 TMP 15124C 24 VDC / 625 mA 79 %
TMP 15148 TMP 15148C 48 VDC / 310 mA 79 %
TMP 30105 TMP 30105C 5 VDC / 6000 mA 78 %
TMP 30112 TMP 30112C 12 VDC / 2500 mA 80 %
TMP 30115 TMP 30115C 30 W 15 VDC / 2000 mA 80 %
TMP 30124 TMP 30124C 24 VDC / 1250 mA 80 %
TMP 30148 TMP 30148C 48 VDC / 625 mA 80 %
TMP 60105 TMP 60105C 51 W 5.1 VDC / 10‘000 mA 79 %
TMP 60112 TMP 60112C 12 VDC / 5000 mA 82 %
TMP 60115 TMP 60115C 15 VDC / 4000 mA 83 %
TMP 60124 TMP 60124C 60 W 24 VDC / 2500 mA 84 %
TMP 60136 TMP 60136C 36 VDC / 1665 mA 84 %
TMP 60148 TMP 60148C 48 VDC / 1250 mA 84 %
Single Output Models 15 to 60 Watt
Peak current, total power not to exceede 30 Watt: 1) 133 %
2)
150 %
3)
200 %
Order code Output Output 1 Output 2 Output 3 Eff.
PCB-mount Chassis mount power typ.
Models with common ground
TMPM 04212 +12 VDC / 166 mA –12 VDC / 166 mA 77 %
TMPM 04215 4 W +15 VDC / 133 mA –15 VDC / 133 mA 77 %
TMPM 04253 +5.0 VDC / 600 mA +3.3 VDC / 150 mA 72 %
TMPM 04225 +12 VDC / 250 mA +5.0 VDC / 120 mA 75 %
TMP 10212 10 W +12 VDC / 380 mA –12 VDC / 380 mA 77 %
TMP 10215 +15 VDC / 300 mA –15 VDC / 300 mA 77 %
TMP 15212 TMP 15212C 15 W +12 VDC / 650 mA –12 VDC / 650 mA 79 %
TMP 15215 TMP 15215C +15 VDC / 500 mA –15 VDC / 500 mA 79 %
TMP 30212 TMP 30212C 30 W +12 VDC / 1300 mA –12 VDC / 1300 mA 80 %
TMP 30215 TMP 30215C +15 VDC / 1000 mA –15 VDC / 1000 mA 80 %
Models with output 1 isolated from output 2/3 (floating)
TMP 15252 TMP 15252C 5.0 VDC / 1500 mA 12 VDC / 625 mA 72 %
TMP 15512 TMP 15512C 15 W 5.0 VDC / 2000 mA +12 VDC / 200 mA –12 VDC / 200 mA 74 %
TMP 15515 TMP 15515C 5.0 VDC / 2000 mA +15 VDC / 150 mA –15 VDC / 150 mA 74 %
TMP 30252 TMP 30252C 5.0 VDC / 3000 mA2) 12 VDC /1250 mA2) 76 %
TMP 30512 TMP 30512C 5.0 VDC / 3000 mA2) +12 VDC / 600 mA2) –12 VDC / 600 mA2) 76 %
TMP 30515 TMP 30515C 30 W 5.0 VDC / 3000 mA2) +15 VDC / 500 mA2) –15 VDC / 500 mA2) 76 %
TMP 30522 TMP 30522C 5.0 VDC / 3000 mA2) +12 VDC / 1000 mA2) –12 VDC / 250 mA3) 76 %
TMP 30316 TMP 30316C 3.3 VDC / 4000 mA1) +5.0 VDC / 1500 mA1) +12 VDC / 250 mA3) 71 %
TMP 30317 TMP 30317C 5.0 VDC / 4500 mA1) +3.3 VDC / 1000 mA2) +12 VDC / 250 mA3) 71 %
Multi Output Models 4 to 30 Watt
http://www.tracopower.com
AC/DC Power Modules
TMP & TMPM Series 4 to 60 Watt
Page 3 of 9
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Max. capacitive load [µF] Model series
Output:
TMPM 04 TMP 07 TMPM 10
TMP 10 TMP 15 TMP 30 TMP 60
Single output
models:
3.3 VDC 1200 2200 2200 3900 ---
5.0 / 5.1 VDC 800 2200 2200 3300 3900 8000 8000
9.0 VDC 440 - - - - - -
12 / 15 VDC 260 1000 1000 2200 2200 3900 3900
24 VDC 160 680 680 1000 1000 1500 1500
36 VDC - - - - - - 1000
48 VDC - - - - 680 1000 800
Dual output
models:
3.3 / 5.0 VDC 4700 - - - 2000 3900 -
+12 / –12 / +15 / –15 VDC 260 - - 1000 1500 1500 -
Triple output
models:
3.3 / 5.0 VDC - - - - 2200 2200 -
+12 / –12 / +15 / –15 VDC - - - - 1500 1500 -
Input Specifications
Input voltage – nominal 100 – 240 VAC
– AC range (universal input) 85 – 264 VAC
– DC range 120 – 370 VDC
Input frequency – nominal 50 / 60 Hz
– range 4 – 30 W models: 47 – 440 Hz
60 W models: 47 – 63 Hz
Input current at full load – 115 VAC / 230 VAC input 4 W models: 80 mA / 55 mA typ.
7 W models: 150 mA / 100 mA typ.
10 W models: 200 mA / 130 mA typ.
15 W models: 300 mA / 190 mA typ.
30 W models: 550 mA / 330 mA typ.
60 W models: 1050 mA / 670 mA typ.
External input fuse required (recommended value) 4 W models: 1.0 A slow blow
7 – 15 W models: 2.0 A slow blow
30 W models: 3.5 A slow blow
60 W models: 6.3 A slow blow
Output Specifications
Voltage set accuracy ±2 % max.
Regulation – Input variation Output 1 1 % max.
– Input variation Output 2/3 3 % max.
– Load variation TMPM 04103 model (0–100%): 1.5 % max.
single and floating outputs (10–100%): 1 % max. (0–100% for TMPM 04 models)
common ground outputs balanced load (10–100%): 2.5 % max.
common ground outputs unbalanced load (20/90%): 5.0 % max.
Minimum load TMPM 04 single and sym.dual models: not required
TMPM 04 asym. dual models: 25% per output
single and dual output models:
10 % of rated max. current
triple output models main output:
10 % of rated max. current
triple output models auxiliary outputs:
20 % of rated max. current
operation at lower load condition will not
damage these power supplies, how ever, they
may not meet all listed specifications.
Ripple and noise (20MHz bandwidth) 3.3 VDC & 5.0 VDC outputs: 1.8 % of Vout [mVp-p]
other outputs: 1.0 % of Vout [mVp-p]
Overload protection by current limit 105 % min. of Inom, fold back, automatic
recovery (long term overload condition may
cause damage to the power supply)
Overvoltage protection by Zehner diode (main output only) 120 % of Vout typ.
Start-up time 400 ms typ.
Hold-up time 20 ms typ.
http://www.tracopower.com Page 4 of 9
AC/DC Power Modules
TMP & TMPM Series 4 to 60 Watt
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
General Specifications
Temperature ranges – Operating TMPM 04 models: –25°C to +60°C (no derating)
TMP 10 models: –25°C to +50°C (no derating)
other models: –25°C to +70°C (with derating)
– Storage (non-operating) –40°C to +85°C
Power derating 3.3 %/K above +50°C to +65°C
5.0 %/K above +65°C to +70°C
(no derating aproved for TMPM04 and TMP10 models)
Over temperature protection at 90°C (automatic recovery at 67°C)
Temperature coefficient 0.02 %/K
Humidity (non-condensing) 95 % rel. H max.
Switching frequency 100 kHz typ. fixed
Isolation voltage (60 sec.) – Input/Output 3‘000 VAC
Isolation resistance – Input/Output 100 MOhm (at 500 VDC)
Altitude during operation TMP 10, TMPM 04 & 10, : 2‘000 m max. (6’560 ft) approved
other models: 3‘000 m max. (9‘840 ft) approved
Electromagnetic compatibility (EMC), Emissions EN 61000-6-3: 2007
EN 61204-3: 2000, class A
EN 55022, level B, FCC Part 15 level B
Electromagnetic compatibility (EMC), Immunity EN 61000-6-2: 2005
EN 61204-3: 2000, class A
– Electrostatic discharge ESD EN 61000-4-2 8 kV / 4 kV, criteria B
– RF field susceptibility EN 61000-4-3 10 V/m, criteria A
– Electrical fast transient / burst immunity input EN 61000-4-4 ±2 kV, criteria B
– Electrical fast transient / burst immunity output EN 61000-4-4 ±2 kV, criteria B
– Surge immunity line – neutral EN 61000-4-5, ±1 kV, criteria B
– Surge immunity output EN 61000-4-5 ±0.5 kV, criteria B
– Immunity to conducted RF disturbances EN 61000-4-6 10 V, criteria B
– Mains voltage dips and interruptions EN 61000-4-11 30 % 10 ms, criteria B
60 % 100 ms, criteria C
95 % 5000 ms, criteria C
EMC test certificates www.tracopower.com/products/tmp-emc.pdf
Protection class II
to IEC/EN 60536
Safety standards – Information technology equipment
IEC/EN 60950-1, UL 60950-1
– Industrial control equipment
UL/cUL 508
(chassis mount single and symetric
dual output models only)
Safety approvals – CB certificate for IEC 60950-1 TMPM 04 models: www.tracopower.com/products/tmpm04-cb.pdf
TMP 07 models: www.tracopower.com/products/tmp07-cb.pdf
TMP 10 models: www.tracopower.com/products/tmp10-cb.pdf
TMPM 10 models: www.tracopower.com/products/tmpm10-cb.pdf
TMP 15 models: www.tracopower.com/products/tmp15-cb.pdf
TMP 30 single output models: www.tracopower.com/products/tmp30-cb.pdf
TMP 30 dual / triple output models: www.tracopower.com/products/tmp30-cb2.pdf
TMP 60 models: www.tracopower.com/products/tmp60-cb.pdf
– UL approvals for UL 60950-1 www.ul.com -> certifications -> File: e188913
– UL approval for UL 508 (chassis mount models only) www.ul.com -> certifications ->
File: e322109
Reliability /calculated MTBF TMP 07, TMPM 04 & 10 models: >330‘000 h
(MIL-HDBK-217F, at +25°C, ground benign) TMP 10 models: >300‘000 h
TMP 15 models: >280‘000 h
TMP 30 models: >250‘000 h
TMP 60 models: >125‘000 h
Casing material plastic resin + fiberglass (UL 94V-0 rated)
Environmental compliance – Reach www.tracopower.com/products/tmp-reach.pdf
– RoHS RoHS directive 2011/65/EU
http://www.tracopower.com Page 5 of 9
AC/DC Power Modules
TMP & TMPM Series 4 to 60 Watt
Outline Dimensions
Pin diameter: 1.0 (0.04)
TMP 07 models:
TMP 10 models:
Weight: 44 g (1.55 oz)
Dimensions in [mm], ( ) = Inches
Case tolerances: ±0.5 (±0.02)
Pin pich tolerance: ±0.25 (±0.01)
19.3
0.5 6.0
5.0
(0.02)
(0.24)
(0.76)
(0.20)
5.0
(0.20)
1
2
43
10.16
25.4
20.32
2.54
45.72
50.80
(0.40)
(1.00)
(0.80)
(0.10)
Bottom view
(1.80)
(2.00)
2.54
(0.10)
Pin Single
1AC (N)
2AC (L)
3+Vout
4–Vout
Pinout
1
2
435
10.16 10.16
45.0
17.78
19.0
0.5 6.0
54.0
64.0
5.0
(0.40)(0.40)
(1.77)
(0.70) (0.02)
(0.24)
(0.75)
(0.20)
5.0
(0.20)
Bottom view
(2.13)
(2.52)
4.0
(0.16)
22.5 (0.89)
Pin Single Dual
1AC (N) AC (N)
2AC (L) AC (L)
3–Vout Vout 2
4ntc com.1/2
5+Vout Vout 1
Pinout
Pin diameter: 1.0 (0.04)
Weight: 92 g (3.25 oz)
(ntc = not to connect)
TMPM 10 models:
23.5
0.7 10.0
5.0
(0.03)
(0.39)
(0.93)
(0.20)
5.0
(0.20)
1
2
43
10.16
27.2
20.32
3.45
45.72
52.4
(0.40)
(1.07)
(0.80)
(0.14)
Bottom view
(1.80)
(2.06)
3.35
(0.13)
Pin Single
1AC (N)
2AC (L)
3+Vout
4–Vout
Pinout
Pin diameter: 1.0 (0.04)
Weight: 54 g (1.90 oz)
7.50
(0.30)
Bottom view
14.00
(0.55)
2x3.75
(2x0.15)
3.75
(0.15)
36.5 (1.44)
27.0 (1.06)
21.00 (0.83)3.00
(0.12)
7.50
(0.30)
25.25 (0.99)
17.1 (0.67) 4.0
(0.16)
1
23
4
5
6
7
TMPM 04 models:
Pin diameter: 0.5 (0.02)
Weight: 26 g (0.92 oz)
Pin Single Dual
1ntc
2ntc
3+Vout Vout 1
4–Vout com.1/2
5ntc Vout 2
6AC (N)
7AC (L)
Pinout
(ntc = not to connect)
http://www.tracopower.com Page 6 of 9
AC/DC Power Modules
TMP & TMPM Series 4 to 60 Watt
Outline Dimensions
TMP 15 models for PCB mount:
TMP 15 models for chassis mount:
Dimensions in [mm], ( ) = Inches
Case tolerances: ±0.5 (±0.02)
Pin pich tolerance: ±0.25 (±0.01)
Mounting hole tolerance: ±0.25 (±0.02)
1
2
546
11.43
54.0
20.32
62.0
74.0
(0.45)
(2.13)
(0.80)
Bottom view
(2.44)
(2.91)
3
8.89
(0.35)
7
27.0 (1.06)
11.43
(0.45)
8.89
(0.35)
2 x M4 THD
19.9 (0.78) 19.9 (0.78)
40.0 (1.57)
6.0
(0.24)
19.3
0.5 6.0
5.0
(0.02)
(0.24)
(0.76)
(0.20)
5.0
(0.20)
Pin Single Dual
sym.
Dual
asym.
Triple
1AC (N)
2AC (L)
3no pin Vout 3
4–Vout Vout 2 –Vout 2 com.2/3
5no pin com.1/2 +Vout 2 Vout 2
6+Vout Vout 1 –Vout 1 –Vout 1
7no pin +Vout 1 +Vout 1
Pin-Out
54637
1 2
Top view
86.0
96.0
(3.39)
(3.78)
5.0
(0.20)
54.0 (2.13)
4.0
(0.16)
46.0 (1.81)
76.0 (2.99)10.0
(0.39)
23.3 (0.92)
5.0
(0.20
11.8
(0.46)
4 x ø3.5
Pin Single Dual
sym.
Dual
asym.
Triple
1AC (N)
2AC (L)
3ntc Vout 3
4–Vout Vout 2 –Vout 2 com.2/3
5ntc com.1/2 +Vout 2 Vout 2
6+Vout Vout 1 –Vout 1 –Vout 1
7ntc +Vout 1 +Vout 1
Connection
(ntc = not to connect)
Pin diameter: 1.0 (0.04)
Weight: 114 g (4.02 oz)
Weight: 162 g (5.71 oz)
Max Screw penetration: 5.5 (0.21)
http://www.tracopower.com Page 7 of 9
AC/DC Power Modules
TMP & TMPM Series 4 to 60 Watt
Outline Dimensions
TMP 30 models for PCB mount:
1
2
546
63.5
31.75
81.3
88.9
(2.50)
(1.25)
Bottom view
(3.20)
(3.50)
37
27.94 (1.10)
12.70
(0.50)
15.24
(0.60)
2 x M4 THD
27.5 (1.08)
3.8
(0.15)
5.0 (0.20)
27.65 (1.09)
12.70
(0.50)
15.24
(0.60)
27.94 (1.10)
21.5
0.5 6.0
5.0
(0.02)
(0.24)
(0.85)
(0.20)
5.0
(0.20)
Pin Single Dual sym.
Dual asym.
Triple
1AC (N)
2AC (L)
3+Vout Vout 1 +Vout 2 Vout 2
4no pin / ntc +Vout 1 +Vout 1
5–Vout com.1/2 –Vout 2 com
2/3
6no pin / ntc –Vout 1 –Vout 1
7ntc Vout 2 ntc Vout 3
Pinout / Connection
(ntc = not to connect)
Dimensions in [mm], ( ) = Inches
Case tolerances: ±0.5 (±0.02)
Pin pich tolerance: ±0.25 (±0.01)
Mounting hole tolerance: ±0.25 (±0.02)
Pin diameter: 1.0 (0.04)
Weight: 177 g (6.24 oz)
TMP 30 models for chassis mount:
Weight: 191 g (6.74 oz)
54637
1 2
Top view
100.0
112.0
(3.94)
(4.41)
6.0
(0.24)
63.8 (2.51)
6.9
(0.27)
50.0 (1.97)
4 x ø3.5
92.0 (3.62)10.0
(0.39)
25.6 (1.01)
5.0
(0.20)
11.8
(0.46)
Max Screw penetration: 5.5 (0.21)
http://www.tracopower.com Page 8 of 9
AC/DC Power Modules
TMP & TMPM Series 4 to 60 Watt
Outline Dimensions
TMP 60 models for chassis mount:
(ntc = not to connect)
Dimensions in [mm], ( ) = Inches
Case tolerances: ±0.5 (±0.02)
Mounting hole tolerance: ±0.25 (±0.02)
Weight: 357 g (12.95 oz)
Pin Single
1AC (N)
2AC (L)
3ntc
4+Vout
5ntc
6–Vout
7ntc
Connection
54637
1 2
Top view
100.0
112.0
(3.94)
(4.41)
6.0
(0.24)
67.8 (2.67)
8.9
(0.35)
50.0 (1.97)
4 x ø3.5
92.0 (3.62)10.0
(0.39)
38.0 (1.50)
5.0
(0.20)
11.8
(0.46)
TMP 60 models for PCB mount:
1
2
46
67.5
33.75
81.3
89.0
(2.66)
(1.33)
Bottom view
(3.20)
(3.50)
37
27.94 (1.10)
12.70
(0.50)
15.24
(0.60)
2 x M4 THD
27.5 (1.08)
3.85
(0.15)
5.55 (0.219)
27.05 (1.065)
12.70
(0.50)
15.24
(0.60)
27.94 (1.10)
34.0
0.5 6.0
5.0
(0.02)
(0.24)
(1.34)
(0.20)
5.0
(0.20)
Weight: 345 g (12.17 oz)
Pin diameter: 2.0 (0.08)
Pin Single
1AC (N)
2AC (L)
3no pin
4+Vout
6–Vout
7no pin
Pinout
Max Screw penetration: 5.5 (0.21)
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Page 9 of 9
AC/DC Power Modules
TMP & TMPM Series 4 to 60 Watt
DIN-Rail Mounting Kit
Order code For models
TMP-MK1 TMP 15xxxC
TMP-MK2 TMP 30xxxC & TMP 60xxxC
DIN-Rail Mounting Kit
Adapter for mounting on DIN-rails as per EN 50022-35 (snap-on mounting)
Specifications can be changed any time without notice.
Kit contains interface plate, DIN-rail clip and necessary screws.
Rev. June 19. 2013
