STw5098 dual, low power, stereo audio codec with integrated amplifiers
• Dual 20-bit, 8 to 96 kHz independent rate stereo ADC and
DAC with dual I²S or PCM digital interfaces for dual-master
• 93 dB dynamic range ADC, 0.001% THD @ 2.7 V
• 95 dB dynamic range DAC, 0.02% THD @ 2.7 V
• Wide master clock range from 4 to 32 MHz
• 8/16 kHz voice codec with embedded channel filters
• Selectable and mixable analog stereo signal inputs
and outputs
• Stereo differential/single line out
• 2 x 40 mW over 16 Ω headset AB amplifiers,
no DC coupling capacitor (phantom ground)
• 500 mW loudspeaker amplifier
• DSP functions for bass, treble and volume
• Interfaces: I²S/SPI/PCM for audio data
and I²C/SPI for control
• Low power (23 mW in playback, 1 µW in standby)
• LFBGA 112 (6 x 6 x 1.4, 0.5 mm pitch)
• VFBGA 112 (5 x 5 x 1.0, 0.4 mm pitch)
• High-quality audio for recording and listening
• Supports several audio sources in portable equipment
(modem, digital processor, Bluetooth, FM radio, tune
generator, etc.)
• Sustains concurrent voice and audio flowswith or
without mixing
• Cost-optimized for portable applications
• Multimedia handheld devices featuring state-of-the-art
audio configurations such as MP3, gaming and voice call
concurrent applications
• Mobile phones
• PDAs
• Personal media players
The STw5098 is a dual, high-quality stereo codec with
headphones and hands-free amplifiers. It is dedicated to
mobile phones supporting several audio sources (modem,
digital audio such as MP3 or gaming, Bluetooth, FM radio,
etc.) and performing complex audio flows.
The two available I2S/PCM digital interfaces - one per
master -enable concurrent audio and voice flow between
the network and user. With the STw5098, the audio
capabilities of your mobile are no longer restricted.
For example, it allows you to record yourself singing, while
at the same time enabling your sister to talk to her friends.
www.stericsson.com