HMC348LP3 / 348LP3E v05.0805 GaAs MMIC SPDT NON-REFLECTIVE CATV SWITCH, DC - 2.5 GHz Typical Applications Features The HMC348LP3 / HMC348LP3E is ideal for: High Isolation: >80 dB @ 5 MHz (50 Ohm) >55 dB @ 1 GHz (50 Ohm) * 75 Ohm Systems CATV Signal Distribution, Cable Modem Headend & DBS IF Switching * 50 Ohm Systems Basestation Infrastructure & Test Equipment "All Off" Isolation State Non-Reflective Design, 75 Ohm Terminations TE 3x3 mm SMT Package General Description Functional Diagram The HMC348LP3 & HMC348LP3E are non-reflective GaAs MESFET SPDT switches in low cost leadless QFN surface mount plastic packages ideal for CATV applications. Covering DC to 2.5 GHz, the switch offers high isolation, low insertion loss, integrated 75 Ohm terminations and an "all off" state. The switch features >80 dB isolation at 5 MHz and >55 dB isolation up to 1 GHz. The switch operates using complementary positive control voltage logic lines of +5/0V and requires a +5V bias supply (Vdd). This switch offers excellent performance in both 50 Ohm & 75 Ohm systems for either SPDT or SPST functions. LE SO SWITCHES - SMT 10 Electrical Specifi cations, TA = +25 C, With 0/+5V Control, 50 Ohm System B Parameter Min. Typ. Max. Units 0.6 0.7 0.9 1.0 dB dB Isolation DC - 250 MHz DC - 750 MHz DC - 1000 MHz DC - 2000 MHz DC - 2500 MHz 63 53 50 47 45 68 58 55 52 50 dB dB dB dB dB O Insertion Loss Return Loss "On State" DC - 2500 MHz 15 20 dB Return Loss RF1, RF2 "Off State" DC - 1000 MHz DC - 2500 MHz 9 8 12 11 dB dB Input Power for 1 dB Compression 50 MHz 1000 MHz 20 25 23 28 dBm dBm Input Third Order Intercept (Two-Tone Input Power= 0 dBm Each Tone, 6 MHz Tone Separation) 50 MHz 1000 MHz 2500 MHz 43 48 51 dBm dBm dBm Input Second Order Intercept (Two-Tone Input Power= 0 dBm Each Tone, 6 MHz Tone Separation) 50 MHz 1000 MHz 2500 MHz 72 89 80 dBm dBm dBm DC - 2500 MHz 25 600 ns ns Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 10 - 232 Frequency DC - 1000 MHz DC - 2500 MHz For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 * Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC348LP3 / 348LP3E v05.0805 GaAs MMIC SPDT NON-REFLECTIVE CATV SWITCH, DC - 2.5 GHz Insertion Loss, 50 Ohm System Insertion Loss, 75 Ohm System INSERTION LOSS (dB) 0 -0.5 +25C +85C -40C -1.5 -1 -1.5 -2 0 0.5 1 1.5 2 2.5 0 0.5 Isolation, 50 Ohm System 0 2 2.5 10 0 -10 -20 -20 RF1 RF2 ALL OFF -40 -50 -70 -80 0 0.5 SO -30 -60 1 1.5 2 -30 -40 -50 -60 -70 -80 2.5 0 0.5 B FREQUENCY (GHz) Return Loss, 50 Ohm System 1 1.5 2 2.5 2 2.5 FREQUENCY (GHz) Return Loss, 75 Ohm System 0 RFC RF1, RF2 ON RF1, RF2 OFF -5 RETURN LOSS (dB) O -5 RETURN LOSS (dB) 1.5 Isolation, 75 Ohm System -10 0 1 FREQUENCY (GHz) LE FREQUENCY (GHz) SWITCHES - SMT -2 ISOLATION (dB) -0.5 TE -1 ISOLATION (dB) INSERTION LOSS (dB) 0 -10 -15 -20 -25 -30 RFC RF1, RF2 ON RF1, RF2 OFF -10 -15 -20 -25 -30 -35 -35 0 0.5 1 1.5 2 2.5 FREQUENCY (GHz) 0 0.5 1 1.5 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 * Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 233 HMC348LP3 / 348LP3E v05.0805 GaAs MMIC SPDT NON-REFLECTIVE CATV SWITCH, DC - 2.5 GHz Input Compression Point, 50 Ohm System Absolute Maximum Ratings Bias Voltage Range (Vdd) 30 +7.0 Vdc RF Input Power +30 dBm Control Voltage Range (A & B) +0.5V to Vdd + 1.0 Vdc 24 Channel Temperature 150 C 22 Continuous Pdiss (T = 85 C) (derate 4 mW/C above 85 C) 0.3 W 28 26 20 18 TE INPUT COMPRESSION POINT (dBm) 32 0.1 dB T=+25C 0.1 dB T=+85C 0.1 dB T= -40C 1 dB T=+25C 1 dB T=+85C 1 dB T= -40C 16 14 12 10 0 0.5 1 1.5 2 2.5 10 104 C/W Thermal Resistance (Terminated Path) 240 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ESD Sensitivity (HBM) Class 1A LE FREQUENCY (GHz) Thermal Resistance (Insertion Loss Path) SWITCHES - SMT ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Bias Voltage & Current +5.0 Control Input SO Vdd Range = +5.0 Vdc 10% Vdd (Vdc) Truth Table Idd (Typ.) (mA) Idd (Max.) (mA) 1.1 2.2 Signal Path State A B RFC to RF1 RFC to RF2 High Low On Off Low High Off On Low Low Off Off State Bias Condition Low 0 to +0.8V @ 5 uA Typical High B Control Voltages O +2.0 to +5.0 Vdc @ 35 uA Typical 10 - 234 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 * Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC348LP3 / 348LP3E v05.0805 GaAs MMIC SPDT NON-REFLECTIVE CATV SWITCH, DC - 2.5 GHz NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. SO 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Lead Finish Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 B HMC348LP3 Package Body Material HMC348LP3E MSL Rating Package Marking [3] [1] 348 XXXX [2] 348 XXXX 10 SWITCHES - SMT LE TE Outline Drawing O [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 * Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 235 HMC348LP3 / 348LP3E v05.0805 GaAs MMIC SPDT NON-REFLECTIVE CATV SWITCH, DC - 2.5 GHz Pin Descriptions Description 1 Vdd Supply Voltage +5V 10% 2, 4, 5, 6, 9, 12, 15,16 N/C These pins should be connected to PCB RF ground to maximize isolation. 3, 7, 14 RFC, RF1, RF2 These pins are DC coupled and matched to 75 Ohms. Blocking capacitors are required. 8, 13 ACG1, ACG2 External capacitors to ground are required. Select value for optimal isolation below 500 MHz. 10 B See truth table and control voltage table. 11 A Interface Schematic LE TE Function See truth table and control voltage table. SO SWITCHES - SMT 10 Pin Number O B Application Circuit The value of capacitors C1 & C2 are critical for low frequency isolation performance below 500 MHz. 3300 pF 0402 size capacitors are recommended for optimal isolation down to 5 MHz. If the frequency of operation is above 500 MHz then 100 pF to 300 pF 0402 capacitors will be sufficient. 10 - 236 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 * Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC348LP3 / 348LP3E v05.0805 GaAs MMIC SPDT NON-REFLECTIVE CATV SWITCH, DC - 2.5 GHz B 10 SWITCHES - SMT SO LE TE Evaluation PCB (50 Ohms) List of Materials for Evaluation PCB 106343 [1] Description O Item J1 - J3 PCB Mount SMA RF Connector J4 - J7 DC Pin R1 - R2 100 Ohm Resistor, 0402 Pkg. C1, C2, C4 - C7 3300 pF Capacitor, 0402 Pkg. C3 4.7 uF Tantalum Capacitor U1 HMC348LP3 / HMC348LP3E SPDT Switch PCB [2] 106255 Evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 * Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 237