Compact Photoelectric Sensor with Stainless Steel Housing E3ZM CSM_E3ZM_DS_E_5_4 Stainless Steel Housing Ideal for Food Industry PAT Pending * Strong resistance against detergents, disinfectants, and jet liquid flow. * Product lineup includes BGS Reflective Models and Through-beam Models with built-in slits. * Certified by Ecolab Europe. Be sure to read Safety Precautions on page 13. Features World's t es Strong Withstands Detergent and Disinfectant Spray We used SUS316L for the case and the best material for all parts to achieve 200 times the durability of the E3Z (in 1.5% solution of sodium hydroxide at 70C) to make the E3ZM suitable for the cleaning conditions of food-processing machinery. 's 's W Woorrlldd t s s r i r FFi t Superior Protective Structure The first IP69K* (DIN 40050-9) protective structure in the world for a square metal photoelectric sensor. Suitable for hightemperature, high-pressure jet water spray cleaning applications. * Refer to the footnote on page 5 (ratings and specifications table). y's Industr s e B t Rear Shape and Markings Designed for Greater Hygiene Few indentations in the shape means less dust and water can collect, making the E3ZM more hygienic. No labels have been used in order to prevent foreign matter contaminating food products. The E3ZM model and lot numbers are imprinted using a laser marker. 1 E3ZM Structural Design That Provides Excellent Environment-resistance* Indicator cover: Polyethersulfone (PES) Excellent resistance to detergents and disinfectants. Sensitivity adjustment and mode selector switch: Polyetheretherketone (PEEK) Waterproofing ring: Fluorine rubber Excellent resistance to detergents and disinfectants. Excellent resistance to detergents and disinfectants. Also has excellent abrasion resistance. Optical plate: Polymethylmethacrylate (PMMA) Case: SUS316L Excellent resistance to detergents and disinfectants. High transparency and other qualities give PMMA excellent optical characteristics. Excellent corrosion resistance to many chemical reagents. Cable: Polyvinylchloride Seal Excellent resistance to detergents and disinfectants. The seal provides the durability to high-temperature and high-pressure water that complies with IP69K. *Do not use the E3ZM in an oily environment. Unique Members of the E3ZM Family BGS Reflective Models E3ZM-LS6@H/-LS8@H Three models with different fixed sensitivity (rated sensing distances) have been created. These models cover the sensing ranges of the E3ZLS61. 100mm 150mm 200mm Through-beam Inner Aperture Models E3ZM-T63 Fine beam without attaching an external aperture. This eliminates malfunctions from residual water drops, even immediately after washing. 0.8 m Same minimum detection object (0.7-mm dia.) as the E3Z-T61+E39-S65C (2-mm-dia. aperture). A Better Fit for the Application The E3ZM can be used in those harsh cleaning environments in which the E3Z was difficult to use. E3ZM passed the material resistance tests and is certified by Ecolab. Ecolab GmbH & Co. OHG P.O. Box 13 04 06 D-40551 Dusseldorf This certificate is based on: documented test procedures (test no.: F&E/P3-E Nr. 40-1) according to material resistance defined product descriptions standardized cleaning procedure certifies that for OMRON Manufacturing of Germany GmbH Carl-Benz-Strasse 4 71154 Nufringen material resistance tests Test procedure Ecolab-test F&E Nr. 40-1 Dipping test: * Complete immersion in solutions/liquid Test period: * 14 days Temperature: * room temperature (constant) were performed with cleaning substances P3-topax 56, P3-topax 66, P3-topax 91, P3 Topactiv DES and demineralized water as a zero reference factor. The material resistance of the tested series Photoelectric Sensor E3ZM Analysis: Visual judgement like swelling, brittleness, discoloring compared to zero-reference factor (demineralized water) Photometric documentation Product specifications: P3-topax 56: Acid foam cleaning substance for food industry P3-topax 66: Alkaline cleaning detergent with active chlorine for machine cleaning in food and beverage industry P3-topax 91: Neutral disinfection agent based on quaternary ammonium compounds (QAV) for food industry P3-topactive DES: Acid disinfectant based on Peracetic Acid and Hydrogen Peroxide for the food and beverage industry to the P3 products used in the test can be considered to be positive according to the cleaning procedure mentioned overleaf. Cleaning plan for food and beverage industry* Dusseldorf, 14th February 2006 Rinsing with water 40 - 50C Rinsing with low pressure. Rinsing from top to bottom in the direction of the drains. Cleaning of the drains. Ecolab GmbH & Co. OHG Processing and wrapping of meat or raw food products i.V. i. V. Thomas Tyborski Reimund Laaff Foaming from bottom to top alkaline: P3-topax 66 2 - 5 % acid: P3-topax 56 2 % temperature: cold up to 40C contact time: 15 min. recommended daily on demand Rinsing with water 40 - 50C Rinsing from top to bottom with low pressure Spray disinfection P3-topax 91 1-2 %, 30 -60 minutes Foam disinfection P3-topactive DES 1-2 %, 10-30 minutes *short description 2 E3ZM Ordering Information Sensors (Refer to Dimensions on page 15.) Sensing method Appearance Red light Connection method Sensing distance Pre-wired (2 m) *3 15 m Connector (M8, 4 pins) Throughbeam *4 (Emitter + Receiver) *5 Pre-wired (2 m) *3 Connector (M8, 4 pins) Retroreflective with MSR function 0.8 m (apertures built in) *2 Pre-wired (2 m) *3 Infrared light Model NPN output E3ZM-T61 2M Emitter E3ZM-T61-L 2M Receiver E3ZM-T61-D 2M E3ZM-T66 Emitter E3ZM-T66-L Receiver E3ZM-T66-D E3ZM-T63 2M Emitter E3ZM-T63-L 2M Receiver E3ZM-T63-D 2M E3ZM-T68 Emitter E3ZM-T68-L Receiver E3ZM-T68-D PNP output E3ZM-T81 2M Emitter E3ZM-T81-L 2M Receiver E3ZM-T81-D 2M E3ZM-T86 Emitter E3ZM-T86-L Receiver E3ZM-T86-D E3ZM-T83 2M Emitter E3ZM-T83-L 2M Receiver E3ZM-T83-D 2M E3ZM-T88 Emitter E3ZM-T88-L Receiver E3ZM-T88-D E3ZM-R61 2M E3ZM-R81 2M E3ZM-R66 E3ZM-R86 E3ZM-D62 2M E3ZM-D82 2M E3ZM-D67 E3ZM-D87 E3ZM-LS61H 2M E3ZM-LS81H 2M E3ZM-LS66H E3ZM-LS86H E3ZM-LS62H 2M E3ZM-LS82H 2M E3ZM-LS67H E3ZM-LS87H E3ZM-LS64H 2M E3ZM-LS84H 2M E3ZM-LS69H E3ZM-LS89H 4m *1 Connector (M8, 4 pins) (100 mm) (Using E39-R1S) Pre-wired (2 m) *3 Diffusereflective 1m Connector (M8, 4 pins) Pre-wired (2 m) *3 10 to 100 mm Connector (M8, 4 pins) BGS reflective (fixed distance) Pre-wired (2 m) *3 10 to 150 mm Connector (M8, 4 pins) Pre-wired (2 m) *3 10 to 200 mm Connector (M8, 4 pins) *1. The Reflector is sold separately. Select the Reflector model most suited to the application. *2. Values in parentheses indicate the minimum required distance between the Sensor and Reflector. *3. Pre-wired Models with a 5-m cable are also available for these products. When ordering, specify the cable length by adding "5M" to the end of the model number (e.g., E3ZM-LT61 5M). *4. Through-beam Models are also available with a light emission stop function. When ordering, add "-G0" to the end of the model number (e.g., E3ZM-T61-G0). *5. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver. Orders for individual Emitters and Receivers are accepted. (Modifications are required for some models. Ask your OMRON representative for details.) Accessories (Order Separately) Reflectors (A Reflector is required for Retro-reflective Sensors: A Reflector is not provided with the Sensor. Be sure to order a Reflector.) (Refer to Dimensions on E39-L/F39-L/E39-S/E39-R.) Name Reflector Fog Preventive Coating Small Reflector Tape Reflector E3ZM-R Sensing distance (typical) * 3 m (100 mm) (rated value) 4 m (100 mm) (rated value) 5 m (100 mm) 2.5 m (100 mm) 3.5 m (100 mm) 3 m (100 mm) 1.5 m (50 mm) 700 mm (150 mm) 1.1 m (150 mm) 1.4 m (150 mm) Model E39-R1 E39-R1S E39-R2 E39-R9 E39-R10 E39-R1K E39-R3 E39-RS1 E39-RS2 E39-RS3 Quantity Remarks 1 1 1 1 1 1 1 1 1 1 * Reflectors are not provided with Retro-reflective models. * The MSR function is enabled. Note: When using a Reflector without a rated value, use 0.7 times typical value as a guideline for the sensing distance. * Values in parentheses indicate the minimum required distance between the Sensor and Reflector. 3 E3ZM Mounting Brackets A Mounting Bracket is not enclosed with the Sensor. Order a Mounting Bracket separately if required. (Refer to Dimensions on E39-L/F39-L/E39-S/E39-R.) Appearance Model (Material) Quantity E39-L153 (SUS304) 1 Remarks Appearance Model (Material) Quantity E39-L98 (SUS304) 1 E39-L150 (SUS304) 1 set Remarks Metal Protective Cover Bracket * Mounting Brackets E39-L104 (SUS304) 1 (Sensor adjuster) E39-L43 (SUS304) 1 Easily mounted to the aluminum frame rails of conveyors and easily adjusted. Horizontal Mounting Bracket * E39-L142 (SUS304) 1 Horizontal Protective Cover Bracket * E39-L44 (SUS304) 1 Rear Mounting Bracket E39-L151 (SUS304) 1 set E39-L144 (SUS304) 1 For left to right adjustment Compact Protective Cover Bracket * Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter. * Cannot be used for Standard Connector models. Sensor I/O Connectors (Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.) (Refer to Dimensions on XS3.) Size Cable Appearance Straight *2 M8 (4 pins) *1 Cable type 2m 5m Standard L-shaped *2 *3 2m Model XS3F-M421-402-A 4-wire 5m XS3F-M421-405-A XS3F-M422-402-A XS3F-M422-405-A Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter. *1. Cable specifications: Outer coating material: PVC, Nut material: Stainless steel, Degree of protection: IP67 (IEC 60529) *2. The connector will not rotate after connecting. *3. The cable is fixed at an angle of 180 from the sensor emitter/receiver surface. 4 E3ZM Ratings and Specifications Sensing method Model Item Through-beam Retro-reflective with MSR function Diffuse-reflective Models NPN output E3ZM-T61 E3ZM-T66 E3ZM-T63 E3ZM-T68 E3ZM-R61 E3ZM-R66 E3ZM-D62 E3ZM-D67 PNP output E3ZM-T81 E3ZM-T86 E3ZM-T83 E3ZM-T88 E3ZM-R81 E3ZM-R86 E3ZM-D82 E3ZM-D87 Sensing distance 15 m 4 m [100 mm] (Using E39-R1S) 3 m [100 mm] (Using E39-R1) 0.8 m Spot diameter (typical) Standard sensing object 1m (White paper 300 x 300 mm) --Opaque: 12-mm dia. min. Opaque: 2-mm dia. min. Differential travel Opaque: 75-mm dia. min. 20% of sensing distance max. --- Black/white error --- --Emitter, Receiver: 3 to 15 Sensor: 3 to 10 Reflector: 30 Light source (wavelength) Infrared LED (870 nm) Red LED (660 nm) Power supply voltage 10 to 30 VDC, including 10% ripple (p-p) Current consumption 40 mA max. (Emitter 20 mA max., Receiver 20 mA max.) Control output Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 2 V max.) Open-collector output (NPN/PNP output depending on model) Light-ON/Dark-ON switch selectable Protection circuits Reversed power supply polarity protection, Output short-circuit protection, and Reversed output polarity protection Response time Operate or reset: 1 ms max. Sensitivity adjustment One-turn adjuster Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max. Ambient temperature range Operating: -25 to 55C, Storage: -40 to 70C (with no icing or condensation) Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) Insulation resistance 20 M min. at 500 VDC Dielectric strength 1,000 VAC, 50/60 Hz for 1 min Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions Degree of protection * IEC: IP67, DIN 40050-9: IP69K Connection method Pre-wired cable (standard length: 2 m) M8 4-pin Connector Indicator Operation indicator (yellow), Stability indicator (green) (Emitter has only power supply indicator (green).) Directional angle Weight (packed state) Pre-wired models (with 2-m cable) Approx. 150 g Connector models Approx. 60 g Case SUS316L Lens PMMA (polymethylmethacrylate) Display PES (polyethersulfone) Materials Sensitivity adjustment and mode selector switch Seals Accessories --Infrared LED (860 nm) 25 mA max. Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection Approx. 90 g Approx. 40 g PEEK (polyetheretherketone) Fluoro rubber Instruction sheet (Note: Reflectors and Mounting Brackets are sold separately.) * IP69K Degree of Protection Specifications IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards. The test item is sprayed with 80C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water is 14 to 16 liters per minute. The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0, 30, 60, and 90 from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally. 5 E3ZM Sensing method Model Item BGS Reflective Models NPN output E3ZM-LS61H E3ZM-LS66H E3ZM-LS62H E3ZM-LS67H E3ZM-LS64H E3ZM-LS69H PNP output E3ZM-LS81H E3ZM-LS86H E3ZM-LS82H E3ZM-LS87H E3ZM-LS84H E3ZM-LS89H Sensing distance 10 to 100 mm (White paper 100 x 100 mm) 10 to 150 mm (White paper 100 x 100 mm) Spot diameter (typical) 4-mmdia. at sensing distance of 100 12-mm dia. at sensing distance of mm 150 mm Standard sensing object 10 to 200 mm (White paper 100 x 100 mm) 18-mm dia. at sensing distance of 200 mm --- Differential travel 3% of sensing distance max. 15% of sensing distance max. 20% of sensing distance max. Black/white error 5% of sensing distance max. 10% of sensing distance max. 20% of sensing distance max. Directional angle --- Light source (wavelength) Red LED (650 nm) Red LED (660 nm) Power supply voltage 10 to 30 VDC, including 10% ripple (p-p) Current consumption 25 mA max. Control output Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 2 V max.) Open-collector output (NPN/PNP output depending on model) Light-ON/Dark-ON cable connection selectable Protection circuits Reversed power supply polarity protection, Output short-circuit protection, Reversed output polarity protection, Mutual interference protection Response time Operate or reset: 1 ms max. Sensitivity adjustment --- Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max. Ambient temperature range Operating: -25 to 55C, Storage: -40 to 70C (with no icing or condensation) Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) Insulation resistance 20 M min. at 500 VDC Dielectric strength 1,000 VAC, 50/60 Hz for 1 min Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions Degree of protection * IEC: IP67, DIN 40050-9: IP69K Connection method Pre-wired cable (standard length: 2 m) M8 4-pin Connector Indicator Operation indicator (yellow), Stability indicator (green) Weight (packed state) Materials Pre-wired models (with 2-m ca- Approx. 90 g ble) Connector models Approx. 40 g Case SUS316L Lens PMMA (polymethylmethacrylate) Display PES (polyethersulfone) Seals Accessories Fluoro rubber Instruction sheet (Note: Mounting Brackets are sold separately.) * IP69K Degree of Protection Specifications IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards. The test item is sprayed with 80C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water is 14 to 16 liters per minute. The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0, 30, 60, and 90 from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally. 6 E3ZM Engineering Data (Typical) Parallel Operating Range Through-beam Models E3ZM-T@1(T@6) 1000 500 100 Distance Y (mm) Distance Y (mm) 1500 Distance Y (mm) Retro-reflective Models E3ZM-R@1(R@6) E3ZM-T@3(T@8) 80 60 40 150 E39-R1S 100 E39-R1 50 20 Y 0 X 0 X X -20 -500 Y Y 0 -50 -40 -60 -1000 -100 -80 0 5 10 15 20 25 30 35 40 Distance X (m) 140 120 Y 80 X 60 1000 1500 2000 Distance X (mm) E3ZM-LS@1H(LS@6H), Top to Bottom Sensing object: 300 x 300 white paper 100 500 -150 0 1 2 3 4 5 6 Distance X (m) BGS Reflective Models Distance Y (mm) Distance Y (mm) Operating Range Diffuse-reflective Models E3ZM-D@2(D@7) -100 0 40 6 Sensing object: 100 x 100 white paper 4 Y X 2 E3ZM-LS@1H(LS@6H), Left to Right Distance Y (mm) -1500 4 Sensing object: 100 x 100 white paper 3 2 1 20 Y 0 0 0 -20 -40 -60 -2 -80 -4 -100 0.2 0.4 0.6 0.8 1 1.2 Sensing object: 100 x 100 white paper 20 Y 15 10 X 20 40 60 80 100 Distance X (mm) E3ZM-LS@2H(LS@7H), Left to Right Distance Y (mm) Distance Y (mm) 25 -6 0 1.4 1.6 1.8 Distance X (m) E3ZM-LS@2H(LS@7H), Top to Bottom -3 6 Sensing object: 100 x 100 white paper 4 2 20 40 60 80 100 Distance X (mm) E3ZM-LS@4H(LS@9H), Top to Bottom 35 Sensing object: 100 x 100 white paper 30 25 Y 20 15 X 10 5 5 0 0 0 -5 -5 -10 -2 -10 -15 Y X -4 -20 -25 -4 0 Distance Y (mm) -120 -140 0 X -1 -2 -15 -20 -25 -30 0 20 40 60 80 100 120 140 160 Distance X (mm) -6 0 20 40 60 80 100 120 140 160 Distance X (mm) -35 0 50 100 150 200 250 Distance X (mm) Distance Y (mm) E3ZM-LS@4H(LS@9H), Left to Right 8 Sensing object: 100 x 100 white paper 6 4 Y 2 X 0 -2 -4 -6 -8 0 50 100 150 200 250 Distance X (mm) 7 E3ZM Retro-reflective Models E3ZM-R@1(R@6) 100 50 30 10 5 3 Operating 1 level 0.5 Excess gain ratio (multiple) E3ZM-T@3(T@8) Excess gain ratio (multiple) Excess gain ratio (multiple) Excess Gain vs. Distance Through-beam Models E3ZM-T@1(T@6) 100 10 100 50 30 10 5 E39-R1S 3 E39-R1 Operating 1 level Operating 1 level 0.5 0.3 0.3 0.1 0 5 10 15 20 25 30 35 0.1 0.1 40 45 50 Distance (m) 0 500 1000 1500 0 2000 2500 Distance (mm) 1 2 3 4 5 6 Distance (m) Excess gain ratio (multiple) Diffuse-reflective Models E3ZM-D@2(D@7) 100 Sensing object: 300 x 300 white paper 50 30 10 5 3 Operating 1 level 0.5 0.3 0.1 0.5 1 1.5 2 2.5 Distance (m) Spot Diameter vs. Distance BGS Reflective Models E3ZM-LS@1H(LS@6H) Spot diameter (mm) Distance (m) Sensing Object Size vs. Distance Diffuse-reflective Models E3ZM-D@2(D@7) 1.8 1.6 1.4 1.2 E3ZM-LS@2H/LS@4H(LS@7H/LS@9H) Spot diameter (mm) 0 12 10 8 20 18 16 14 12 1.0 6 10 0.8 8 4 0.6 6 0.4 d Sensing object: White paper 4 2 0.2 2 d 0.0 0 100 200 300 400 500 600 Length d of sensing object (mm) 0 0 20 40 60 80 100 Distance (mm) 0 0 50 100 150 200 250 Distance (mm) 8 E3ZM 100 80 E3ZM-LS@4H(LS@9H) 180 Sensing distance (mm) 120 250 Sensing distance (mm) Sensing distance (mm) Sensing Distance vs. Sensing Object Material BGS Reflective Models E3ZM-LS@1H(LS@6H) E3ZM-LS@2H(LS@7H) 160 140 120 100 200 150 60 80 100 40 60 40 50 20 20 0 0 Mirror surface 0 White Veneer Card- Black Black SUS paper board paper rubber Material 50 Upwards and Downwards Inclination angle 40 30 Sensing object 20 Center line + - 10 0 50 50 E3ZM-LS@4H(LS@9H) (Upwards and Downwards) Inclination angle 40 40 30 30 Sensing object 20 20 Center line + - 10 10 00 50 50 30 30 -20 -20 -30 -30 -30 -30 -40 -40 -40 -40 -40 -50 -80 -50 -50 -80 -60 -80 -60 (Left and Right) Inclination angle 40 40 30 30 Sensing object 20 20 Center line + - 10 10 00 -10 -10 -40 -40 -20 -20 00 50 (Left and Right) Inclination angle 30 20 Center line + - 10 0 30 30 -30 -30 -40 -40 -40 -40 -40 -50 -50 -80 -80 -50 -80 60 80 80 60 Inclination angle () + - 00 -20 -20 40 40 Center line 10 10 -30 20 20 Sensing object 20 20 -20 00 20 40 60 20 40 60 80 80 Inclination angle () (Left and Right) Inclination angle 40 40 -30 -30 -20 -20 00 -10 -10 -10 -40 -40 -20 -20 50 50 -20 -20 -60 -60 -40 -40 E3ZM-LS@4H(LS@9H) 40 Sensing object -50 -50 -80 -80 -60 -60 20 40 60 80 80 20 40 60 Inclination angle () E3ZM-LS@2H(LS@7H) Sensing distance variation (%) 50 50 -10 -10 Sensing distance variation (%) 20 40 60 80 Inclination angle () + + 00 -20 -20 0 Center line 10 10 -30 -20 Sensing object 20 20 -20 -40 (Upwards and Downwards) Inclination angle 40 40 -10 -10 Inclination Characteristics (Horizontal) BGS Reflective Models E3ZM-LS@1H(LS@6H) Sensing distance variation (%) E3ZM-LS@2H(LS@7H) Mirror surface Material -10 -60 White Veneer Card- Black Black SUS paper board paper rubber Material Sensing distance variation (%) Sensing distance variation (%) Inclination Characteristics (Vertical) BGS Reflective Models E3ZM-LS@1H(LS@6H) Mirror surface Sensing distance variation (%) White Veneer Card- Black Black SUS paper board paper rubber -60 -40 -20 0 20 40 60 80 Inclination angle () -50 -50 -80 -80 -60 -60 -40 -40 -20 -20 00 20 40 60 80 80 20 40 60 Inclination angle () 9 E3ZM I/O Circuit Diagrams NPN Output Model Operation mode Light-ON E3ZM-T61* E3ZM-T63* E3ZM-T66* E3ZM-T68* E3ZM-R61 E3ZM-R66 E3ZM-D62 E3ZM-D67 Dark-ON Operation selector Timing charts Light incident Light interrupted Operation indicator ON (yellow) OFF ON Output transistor OFF Operate Load (e.g., relay) Reset L side (LIGHT ON) Through-beam Receivers, Retro-reflective Models, Diffuse-reflective Models Operation indicator (Yellow) (Between brown and black leads) Light incident Light interrupted Operation indicator ON (yellow) OFF ON Output transistor OFF Operate Load (e.g., relay) Reset Output circuit Brown Stability indicator (Green) (Control output) Photoelectric Sensor Main Circuit D side (DARK ON) 10 to 30 VDC 1 Load (Relay) 100 mA max. 4 Black ZD Blue 3 0V (Between brown and black leads) Through-beam Emitter Brown Power indicator (green) 1 Photoelectric Sensor Main Circuit 10 to 30 VDC Blue 3 Through-beam Emitter E3ZM-T61-G0* E3ZM-T63-G0* E3ZM-T66-G0* E3ZM-T68-G0* Light emission stop function --- ON OFF Power indicator (Green) Brown 10 to 30 VDC (Between blue (3) and pink (2) leads) 1 --- ON OFF ON Indicator (green) OFF Photoelectric Sensor Main Circuit Emitter LED Pink 2 (Light emission stop input) Blue 0V 3 NEAR FAR Operation indicator ON (yellow) OFF Light-ON E3ZM-LS61H E3ZM-LS66H E3ZM-LS62H E3ZM-LS67H E3ZM-LS64H E3ZM-LS69H Output transistor Load (e.g., relay) Connect pink lead (2) to brown lead (1). ON OFF Operate Reset (Between brown and black leads) NEAR FAR Operation indicator ON (yellow) OFF Dark-ON Output transistor Load (e.g., relay) ON OFF Operate Reset (Between brown and black leads) Connect pink lead (2) to blue lead (3) or leave open. Operation indicator (Yellow) Stability indicator (Green) Photoelectric Sensor Main Circuit 1 Brown 10 to 30 VDC Light-ON 4 Load (Relay) Black 100 mA max. (Control output) ZD 3 2 Blue 0V Pink Dark-ON * Models numbers for Through-beam Sensors (E3ZM-T@@(-G0)) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3ZM-T61-L 2M, E3ZM-T61-G0-L 2M), the model number of the Receiver, by adding "-D" (example: E3ZM-T61-D 2M, E3ZM-T61-G0-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers. 10 E3ZM PNP Output Operation mode Model Light-ON Operation selector Timing charts Light incident Light interrupted Operation indicator ON (yellow) OFF ON Output transistor OFF Operate Load (e.g., relay) Reset Output circuit L side (LIGHT ON) Through-beam Receivers, Retro-reflective Models, Diffuse-reflective Models Operation indicator (Yellow) (Between blue and black leads) E3ZM-T81* E3ZM-T83* E3ZM-T86* E3ZM-T88* E3ZM-R81 E3ZM-R86 E3ZM-D82 E3ZM-D87 Dark-ON Photoelectric Sensor Main Circuit Light incident Light interrupted Operation indicator ON (yellow) OFF ON Output transistor OFF Load Operate (e.g., relay) Reset 10 to 30 VDC Brown Stability indicator (Green) 1 ZD Black 4 (Control output) 100 mA max. Load (Relay) 3 D side (DARK ON) 0V Blue (Between blue and black leads) Through-beam Emitter Brown Power indicator (Green) 1 Photoelectric Sensor Main Circuit 10 to 30 VDC Blue 3 Through-beam Emitter Light emission stop function E3ZM-T81-G0* E3ZM-T83-G0* E3ZM-T86-G0* E3ZM-T88-G0* --- ON OFF (Between brown (1) and pink (2) leads) Power indicator (Green) Brown 10 to 30 VDC 1 --- ON Emitter LED OFF ON Indicator (green) OFF Photoelectric Sensor Main Circuit (Light emission stop input) Pink 2 Blue 0V 3 NEAR FAR Operation indicator ON (yellow) OFF Light-ON Output transistor Load (e.g., relay) E3ZM-LS81H E3ZM-LS86H E3ZM-LS82H E3ZM-LS87H E3ZM-LS84H E3ZM-LS89H Connect pink lead (2) to brown lead (1). ON OFF Operate Reset Operation indicator (Yellow) Stability indicator (Green) (Between blue and black leads) NEAR FAR Operation indicator ON OFF (yellow) Dark-ON Output transistor Load (e.g., relay) Photoelectric Sensor Main Circuit ON OFF Operate Reset (Between blue and black leads) Connect pink lead (2) to blue lead (3) or leave open. 1 Brown 10 to 30 VDC Light-ON ZD Black 100 mA max. (Control output) 4 Blue Load (Relay) 3 2 0V Pink Dark-ON * Models numbers for Through-beam Sensors (E3ZM-T@@(-G0)) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3ZM-T81-L 2M, E3ZM-T81-G0-L 2M), the model number of the Receiver, by adding "-D" (example: E3ZM-T81-D 2M, E3ZM-T81-G0-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers. Connector Pin Arrangement M8 Connector (-CN)/M8 Pre-wired Connector M8 Pre-wired 3-pin Connector M8 4-pin Connector Pin Arrangement 2 1 M8 3-pin Connector Pin Arrangement 4 4 3 1 3 Plugs (Sensor I/O Connectors) M8 4-pin Connectors 4 3 2 1 Wire color Brown White Blue Black 1 2 3 4 XS3F-E421-402-A XS3F-E421-405-A XS3F-E422-402-A XS3F-E422-405-A 11 E3ZM Nomenclature Sensors with Sensitivity Adjustment and Mode Selector Switch Through-beam Models E3ZM-T@@-D (Receiver) Infinite Adjustment Emitter BGS Reflective Models E3ZM-LS@@H Through-beam Models E3ZM-T@@-L (Emitter) Retro-reflective Models E3ZM-R@@ Diffuse-reflective Models E3ZM-D@@ Stability indicator (Green) Operation indicator (Yellow) Sensitivity adjuster Stability indicator (Green) or Emitter power supply indicator (Green) Operation indicator (Yellow) Note: Emitter: No indicator Operation selector 12 E3ZM Safety Precautions Refer to Warranty and Limitations of Liability. WARNING This product is not designed or rated for ensuring safety of persons. Do not use it for such a purpose. Load Do not use a load that exceeds the rated load. Low-temperature Environments Do not touch the metal surface with your bare hands when the temperature is low. Touching the surface may result in a cold burn. CAUTION Do not use the product with voltage in excess of the rated voltage. Excess voltage may result in malfunction or fire. Never use the product with an AC power supply. Otherwise, explosion may result. Rotation Torque for Sensitivity Adjustment and Selector Switch Adjust with a torque of 0.06 N*m or less. Oily Environments Do not use the Sensor in oily environments. Modifications Do not attempt to disassemble, repair, or modify the Sensor. When cleaning the product, do not apply a concentrated spray of water to one part of the product. Otherwise, parts may become damaged and the degree of protection may be degraded. High-temperature environments may result in burn injury. Precautions for Safe Use The following precautions must be observed to ensure safe operation of the Sensor. Operating Environment Do not use the Sensor in an environment where explosive or flammable gas is present. Outdoor Use Do not use the Sensor in locations subject to direct sunlight. Cleaning Do not use thinner, alcohol, or other organic solvents. Otherwise, the optical properties and degree of protection may be degraded. Washing Do not use highly concentrated detergents. They may cause malfunction. Do not use high-pressure water spray in excess of the specifications. Surface Temperature Burn injury may occur. The Sensor surface temperature rises depending on application conditions, such as the surrounding temperature and the power supply voltage. Use caution when operating or washing the Sensor. Connecting Connectors Be sure to hold the connector cover when inserting or removing the connector. If the XS3F is used, always tighten the connector cover by hand. Do not use pliers. If the tightening is insufficient, the degree of protection will not be maintained and the Sensor may become loose due to vibration. The appropriate tightening torque is 0.3 to 0.4 N*m. If other commercially available connectors are used, follow the recommended connector application conditions and recommended tightening torque specifications. 13 E3ZM Precautions for Correct Use Do not install the Sensor in the following locations. (1)Locations subject to direct sunlight (2)Locations subject to condensation due to high humidity (3)Locations subject to corrosive gas (4)Locations where the Sensor may receive direct vibration or shock Connecting and Mounting (1)The maximum power supply voltage is 30 VDC. Before turning the power ON, make sure that the power supply voltage does not exceed the maximum voltage. (2)Laying Sensor wiring in the same conduit or duct as high-voltage wires or power lines may result in malfunction or damage due to induction. As a general rule, wire the Sensor in a separate conduit or use shielded cable. (3)Use an extension cable with a minimum thickness of 0.3 mm2 and less than 100 m long. (4)Do not pull on the cable with excessive force. (5)Pounding the Photoelectric Sensor with a hammer or other tool during mounting will impair water resistance. Also, use M3 screws. (6)Mount the Sensor either using the bracket (sold separately) or on a flat surface. (7)Be sure to turn OFF the power supply before inserting or removing the connector. Cleaning Never use thinner or other solvents. Otherwise, the Sensor surface may be dissolved. Power Supply If a commercial switching regulator is used, ground the FG (frame ground) terminal. Load Short-circuit Protection This Sensor is equipped with load short-circuit protection, but be sure to not short circuit the load. Be sure to not use an output current flow that exceeds the rated current. If a load short circuit occurs, the output will turn OFF, so check the wiring before turning ON the power supply again. The short-circuit protection circuit will be reset. The load shortcircuit protection will operate when the current flow reaches 1.8 times the rated load current. When using a C load, use an inrush current of 1.8 times the rated load current or higher. Water Resistance Do not use the Sensor in water, rainfall, or outdoors. When disposing of the Sensor, treat it as industrial waste. Mounting Diagram Mounting Bracket (sold separately) E39-L104 Use a mounting torque of 0.5 N*m max. Resistance to Detergents, Disinfectants, and Chemicals * Performance is assured for typical detergents and disinfectants, but performance may not be maintained for some detergents and disinfectants. Refer to the following table when using these agents. * The E3ZM passed testing for resistance to detergents and disinfectants performed using the items in the following table. Refer to this table when considering use of detergents and disinfectants. Category Power Supply Reset Time The Sensor will be able to detect objects 100 ms after the power supply is tuned ON. Start using the Sensor 100 ms or more after turning ON the power supply. If the load and the Sensor are connected to separate power supplies, be sure to turn ON the Sensor first. Turning OFF the Power Supply Output pulses may be generated even when the power supply is OFF. Therefore, it is recommended to first turn OFF the power supply for the load or the load line. Chemical Concentration Temperature Time Sodium hydroxide (NaOH) 1.5% 70C 240h Potassium hydroxide (KOH) 1.5% 70C 240h Phosphoric acid (H3PO4) 2.5% 70C 240h Product name Sodium hypochlorite (NaCIO) 0.3% 25C 240h Hydrogen peroxide (H2O2) 6.5% 25C 240h Alkaline foam detergent P3-topax-66s (Manufactured by Ecolab) 3.0% 70C 240h Acidic foam detergent P3-topax-56 (Manufactured by Ecolab) 5.0% 70C 240h P3-oxonia active 90 (Manufactured by Ecolab) 1.0% 25C 240h TEK121 (Manufactured by ABC Compounding) 1.1% 25C 240h Disinfectant Note: The Sensor was immersed in the chemicals, detergents, and disinfectants listed above at the temperatures in the table for 240 hours and then passed an insulation resistance of 100 M min. 14 E3ZM (Unit: mm) Dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. Sensors Through-beam Models* Pre-wired Models E3ZM-T61(-G0) E3ZM-T81(-G0) E3ZM-T63(-G0) E3ZM-T83(-G0) Emitter Power indicator (green) 10.8 21 3 1.2 2.8 12.7 31 25.4 Emitter 6.4 dia. Two, M3 4 dia. vinyl-insulated round cable with 2 or 3 conductors (Conductor cross section: 0.2 mm2 (AWG24), Insulator diameter: 1.1 mm), Standard lengths: 2 m 11.6 Receiver 4.5 Operation Indicator (yellow) Operation selector Stability indicator (green) Sensitivity adjuster 10.8 21 3 1.2 2.8 12.7 31 25.4 Receiver 6.4 dia. Two, M3 4 dia. vinyl-insulated round cable with 3 conductors (Conductor cross section:0.2 mm2 (AWG24), Insulator diameter:1.1 mm), Standard length: 2 m Through-beam Models* Standard Connector E3ZM-T66(-G0) E3ZM-T86(-G0) E3ZM-T68(-G0) E3ZM-T88(-G0) Emitter Power indicator (green) 10.8 21 2.8 12.7 31 Emitter 6.4 dia. 4 1 3 Terminal No. 1 3 1.2 2 2 3 4 25.4 Specifications +V Light emission stop input (-G0 only) 0V --- Two, M3 7 M8x 1 Receiver 11.6 4.5 Operation Indicator (yellow) Operation selector Stability indicator (green) Sensitivity adjuster 10.8 4 1 3 Terminal No. 1 2 3 4 21 3 1.2 2 2.8 Specifications +V --0V Output 12.7 31 7 Receiver 6.4 dia. 25.4 Two, M3 M8x 1 * Models numbers for Through-beam Sensors (E3ZM-T@@(-G0)) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3ZM-T61-L 2M, E3ZM-T61-G0-L 2M), the model number of the Receiver, by adding "-D" (example: E3ZM-T61-D 2M, E3ZM-T61-G0-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers. 15 E3ZM Retro-reflective Models Pre-wired Models E3ZM-R61 E3ZM-R81 11.6 4.5 Operation Indicator (yellow) Operation selector* Stability indicator (green) Diffuse-reflective Models Standard Connector E3ZM-D62 E3ZM-D82 BGS Reflective Models Pre-wired Models E3ZM-LS61H E3ZM-LS62H E3ZM-LS64H E3ZM-LS81H E3ZM-LS82H E3ZM-LS84H 10.8 1.2 31 21 Receiver 6.4 dia. 3 2.8 16.2 25.4 7 Emitter 6.4 dia. Two, M3 4 dia. vinyl-insulated round cable with 3 conductors (Conductor cross section:0.2 mm2 (AWG24), Insulator diameter:1.1 mm), Standard length: 2 m Retro-reflective Models Standard Connector E3ZM-R66 E3ZM-R86 11.6 Diffuse-reflective Models Standard Connector E3ZM-D67 E3ZM-D87 4.5 Operation Indicator (yellow) Operation selector* Stability indicator (green) Sensitivity adjuster* *No sensitivity adjuster and operation selector with BGS reflective model 10.8 BGS Reflective Models Standard Connector E3ZM-LS66H E3ZM-LS67H E3ZM-LS69H E3ZM-LS86H E3ZM-LS87H E3ZM-LS89H Sensitivity adjuster* *No sensitivity adjuster and operation selector with BGS reflective model 1.2 31 Receiver 6.4 dia. 2.8 16.2 7 25.4 Emitter 6.4 dia. 7 2 4 1 3 21 3 Two, M3 Terminal No. 1 2 3 4 Specifications +V --0V Output M8x 1 16 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: * Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. * Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. * Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. 2010.12 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2010 All Right Reserved.