GG8568F183 - Positronic - Product.Network

• Featuring 200 Amp Size 0 Contacts

• Modular - 256 Possible Versions

• Hot Plug-Blind Mating

• “Safety Feature” Contacts

Positronic Industries

www.connectpositronic.com

SERIES

GG Modular Power Connectors

Typical Mating Systems

Positronic believes the data contained herein to be reliable. Since the technical information is given free of charge, the user employs such information at his

own discretion and risk. Positronic assumes no responsibility for results obtained or damages incurred from use of such information in whole or in part.

Unless otherwise specied, dimensional tolerances are:

1) Male contact mating diameters : ±0.03 [0.001]

2) Contact termination diameters : ±0.08 [0.003]

3) All other diameters : ±0.13 [0.005]

4) All other dimensions : ±0.38 [0.015]

Dimensions are in millimeters [inches].

All dimensions are subject to change.

Catalog A-007 rev. NC

Panel Mount to Cable

Cable to Straight PCB Mount

GG8857F10

GG8857M10

GG8567M10

Cable to Bus bar

Consult factory for availability of Bus bar contacts

Consult factory for availability of

Straight PCB Mount Contacts

GG8568M1EJ

GG8568F1T

GG8567F10

Cable to Cable

GG8888F1T

GG8888M1E

Positronic Industries

www.connectpositronic.com

SERIES

Technical Characteristics

Connector Combination - Total of 256 combinations

Technical Information

Materials and Finishes:

Insulators: Glass-filled nylon, UL 94V-0, Gold color

Consult factory for high performance glass-ﬁlled

polyester material option.

Contacts: Precision machined copper alloy with gold flash

over nickel. Other finishes available upon request.

Electrical Characteristics:

Contact Current Rating (per UL 1977):

*Size 0 Contacts: 200 amperes, continuous (high conductivity material).

175 amperes, continuous (standard material).

(Size 0 contact with 0 AWG wire)

Size 12 Contacts: 45 amperes, continuous (high conductivity material).

35 amperes, continuous (standard material).

Size 16 Contacts: 28 amperes, continuous (high conductivity material).

20 amperes, continuous (standard material).

Size 20 Contacts: 5 amperes, nominal (standard material).

Initial Contact Resistance Max (per IEC 512-2, Test 2b) :

Size 0 Contacts: 0.00012 ohms (high conductivity material).

0.00038 ohms (standard material).

Size 12 Contacts: 0.0005 ohms (high conductivity material).

0.0016 ohms (standard material).

Size 16 Contacts: 0.0012 ohms (high conductivity material).

0.0024 ohms (standard material).

Size 20 Contacts: 0.0036 ohms (standard material).

Insulator Resistance (per IEC 512-2, Test 3a): 5 G ohms.

Voltage Proof:

Size 0 Contacts: 3000 V r.m.s.

Size 12 Contacts: 1500 V r.m.s.

Size 16 Contacts: 1500 V r.m.s.

Size 20 Contacts: 1000 V r.m.s.

Working Voltage:

Size 0 Contacts: 250 V r.m.s.

Size 12 Contacts: 500 V r.m.s.

Size 16 Contacts: 500 V r.m.s.

Size 20 Contacts: 333 V r.m.s.

Hot Pluggable, Size 12 Contacts: 250 V AC at 25 amperes for 50 cycles.

Mechanical Characteristics:

Blind Mating System: Molded in guides allow for

misalignment up to 4.50 mm [0.177 inch]

Polarization: Provided by connector body design.

Removable Contacts (Size 0):

Insert contact in rear face of insulator and secure with locking

clip; release from rear face of insulator by, first, removing locking

clip. Female contacts feature “Closed Entry” design.

Removable Contacts (Size 12, Size 16 and Size 20):

Insert/remove contacts via rear face of insulator; release

contacts via front face of insulator with a contact extraction tool.

Female contacts feature “Closed Entry” design.

Removable Contact Retention in Connector Body

(per IEC 512-8, Test 15a):

Size 0 Contacts: 132 N [30 Ibs.]

Size 12 Contacts: 67 N [15Ibs.]

Size 16 Contacts: 67 N [15 Ibs.]

Size 20 Contacts: 44 N [10 Ibs.]

Sequential Contact Mating System:

Two level systems featured for Size 16 and Size 20 Contacts.

Consult factory for three levels of sequential contact mating option.

Mechanical Operations: 1,000 cycles.

Climatic Characteristic:

Working temperature: -55°C to +125°C.

Recognized:

UL: Certification in process.

TüV: Consult factory.

One (1) size 0

power contact

Four (4) size 12

power contacts

Twelve (12) size 16

power contacts

Nineteen (19) size 20

signal contacts

Two (2) size 8 power contact

(Consult factory for availability) Four (4) modules

Any combination of modules is possible

Positronic Industries

www.connectpositronic.com

SERIES

Temperature Rise Curves

Tested per IEC 512-3, Test 5a

Rated Current (Amps)

High Conductivity

(B) High Conductivity

(A) High Conductivity

High Conductivity

Standard Material

(A) Standard Material

Size 12 Contact 10 AWG Wire

Size 16 Contact 12 AWG Wire

Size 0 Contact 0 AWG Wire

Size 0 Contact 4 AWG Wire

(B) Standard Material

Standard Material

Temperature Rise (ºC)

Above curves developed separately using Size 0

contact with 4 AWG wire. Four (4) Size 0 contacts

under load.

Temperature Rise (ºC)

Above curves developed separately using Size 0

contact with 0 AWG wire. Four (4) Size 0 contacts

under load.

Temperature Rise (ºC)

Above curves developed separately using Size 16 contact

with 12 AWG wire. (A) Twelve (12) Size 16 contacts under

load. (B) Six (6) Size 16 contacts under load.

Temperature Rise (ºC)

Above curves developed separately using Size 12

contact with 10AWG wire. Four (4) Size 12 contacts

under load.

Positronic Industries

www.connectpositronic.com

SERIES

Outline Dimensions & Accessories

Male Connector

Panel Cutout Dimensions

For Float Bushing

Float Bushing

Panel Cutout Dimensions

For Jackscrew System

Jackscrew System

Removable contacts should be allowed to ﬂoat after installation in the connector body.

This enables superior mating performance.

Female Connector

Specify code E for Turnable Male Jackscrew

or T for Fixed Female Jackscrew in Step 5.

Specify code 82 or 83 in Step 5.

Panel

Float Bushing

Turnable Male

Jackscrew

System

Fixed Female

Jackscrew System

Fixed Screw

Materials and Finishes:

Fixed Female Jackscrew: Brass, zinc plate.

Turnable Male Jackscrew: Brass, zinc plate.

Materials and Finishes:

Float Bushing: Brass, zinc plating.

Bushing Screw: Brass, zinc plating .

Outline Dimensions

Panel Cutout

Accessories

Contact factory for dimensions and details of accessories.

2X ∅5.20

[∅0.205]

2X ∅5.20

[∅0.205]

Positronic Industries

www.connectpositronic.com

SERIES

Hood & Removable Straight PCB Mount Contacts

Hood with Cable Clamp

Removable, Solder, Straight PCB Mount Contacts

Large Cable

Clamp

Hood Top

Small Cable Clamp

Hood Bottom

Materials and Finishes:

Hood, Clamps and Screws: Steel, Zinc plating.

Removable contacts should be allowed to ﬂoat after

installation in the connector body. This enables superior

mating performance. Therefore, wires must remain

approximately perpendicular to the connector for a

recommended minimum distance.

See diagram.

Typical connector installed with

removable, solder, straight PCB

mount contacts and Push-on

Fasteners

Consult factory for straight PCB mount

contacts (size 20, 16, and 12 only),

alignment bars and push-on fastener

ordering details and availability.

Consult factory for availability of Hood

Hood Part Number

GG000000J

Application Without Hood

Recommended Minimum Distance.

Designate Code J in step 5 of ordering information.

Positronic Industries

www.connectpositronic.com

SERIES

Part Number

(Standard

Material)

Part Number

(High

Conductivity

Material)

Wire Size

AWG

[mm2]

∅A∅B C

Female Contacts

SFC1210N2 SFC1210N2S 10[6.0] 3.73[0.147] N/A* 22.76[0.896]

SFC1212N2 SFC1212N2S 12[4.0] 2.54[0.100] 4.19[0.165]

Male Contacts

SMC1210BN SMC1210BNS 10[6.0] 3.73[0.147] N/A* 22.70[0.894]

SMC1212BN SMC1212BNS 12[4.0] 2.54[0 .100] 4.19[0.165]

Part Number

(Standard

Material)

Wire Size

AWG [mm2]∅A∅BSequential

Mate C

Female Contacts

SFC2020N2 20[0.5] 1.14[0.045] 1.73[0.068] N/A* 22.30[0.878]

Male Contacts

SMC2020AN 20[0.5] 1.14[0.045] 1.73[0.068] First 23.93[0.942]

SMC2020BN Standard 20.12[0.792]

Removable Contacts & Safety Features

Male connector Female connector

Male

Probe

Protector

Size 0 Male

Crimp Contact

Size 0 Female

Crimp Contact

Crown Pressure

Device

Increased

Insulator area

for safety

The connector was designed to pass the IEC

60950 (ﬁgure 2C) test probe which provides

protection from electric shock and energy hazards.

Materials and Finishes:

Male Probe Protector: Nylon, UL 94V-0, black color.

Crown Pressure Device: Beryllium copper, gold ﬂash over nickel plate.

Materials:

Contacts: Copper alloy.

Retention Clips: Beryllium copper.

Finishes:

Gold ﬂash over nickel plate.

Please use correct wire size and it should be smaller than ∅A of the contact.

Consult factory for other contact sizes, materials, ﬁnishes and termination styles.

Removable contacts should be allowed to ﬂoat after installation in the connector body.

This enables superior mating performance.

N/A*- Not applicable

Size 12 Removable Crimp Contacts

Size 16 Removable Crimp Contacts

Size 20 Removable Crimp Contacts

Safety Features of Insulator and Size 0 Contact

Male

Female

Part Number

(Standard

Material)

Part Number

(High

Conductivity

Material)

Wire Size

AWG

[mm2]

∅A∅BSequential

Mate C

Female Contacts

SFC1612N2 SFC1612N2S 12 [4.0] N/A* 2.49[0.098]

N/A* 22.80 [0.898]

SFC1614N2 SFC1614N2S 14 [2.5] 2.06 [0.081] 2.64[0.104]

SFC1616N2 SFC1616N2S 16 [1.5] 1.70 [0.067] 2.36[0.093

SFC1620N2 SFC1620N2S 20 [0.5] 1.14 [0.045] 1.73[0.068]

Male Contacts

SMC1612AN SMC1612ANS 12 [4.0] N/A* 2.49[0.098] First 23.68 [0.932]

SMC1612BN SMC1612BNS Standard 19.87 [0.782]

SMC1614AN SMC1614ANS 14[2.5] 2.06 [0.081] 2.67[0.105] First 23.68 [0.932]

SMC1614BN SMC1614BNS Standard 19.87 [0.782]

SMC1616AN SMC1616ANS 16[1.5] 1.70[0.067] 2.36[0.093] First 23.68 [0.932]

SMC1616BN SMC1616BNS Standard 19.87 [0.782]

SMC1620AN SMC1620ANS 20 [0.5] 1.14 [0.045] 1.73[0.068] First 23.68 [0.932]

SMC1620BN SMC1620BNS Standard 19.87 [0.782]

Positronic Industries

www.connectpositronic.com

SERIES

Removable Size 0 Contacts

Part Number

(Standard

Material)

Part Number

(High

Conductivity

Material)

Wire Size

AWG [mm2]∅A

Female Contacts

GGFC00N GGFC00NS 0[55] 10.50 [0.413]

GGFC04N GGFC04NS 4[25] 7.50 [0.295]

Male Contacts

GGMC00N GGMC00NS 0[55] 10.50 [0.413]

GGMC04N GGMC04NS 4[25] 7.50 [0.295]

Part Number

(Standard

Material)

Part Number

(High Conductivity

Material)

Thread

Female Contacts

GGFIT00M GGFIT00MS M6 x 1

GGFIT00S GGFIT00SS 1/4-20 UNC 2B

Male Contacts

GGMIT00M GGMIT00MS M6 x 1

GGMIT00S GGMIT00SS 1/4-20 UNC 2B

Part Number

(Standard

Material)

Part Number

(High Conductivity

Material)

Thread

Female Contacts

GGFET00M GGFET00MS M6 x 1

GGFET00S GGFET00SS 1/4-20 UNC 2A

Male Contacts

GGMET00M GGMET00MS M6 x 1

GGMET00S GGMET00SS 1/4-20 UNC 2A

Part Number

(Standard

Material)

Part Number

(High Conductivity

Material)

Thread

Female Contacts

GGFRA00M GGFRA00MS M6 x 1

GGFRA00S GGFRA00SS 1/4-20 UNC 2B

Male Contacts

GGMRA00M GGMRA00MS M6 x 1

GGMRA00S GGMRA00SS 1/4-20 UNC 2B

Size 0 Removable Crimp Contacts

Size 0 Removable Contacts, Internal Threads For Typical Ring Terminal

Size 0 Removable Contacts, External Threads For Typical Ring Terminal

Size 0 Removable Contacts, Right Angle Threads For Typical Ring Terminal

Insertion, Extraction, and Retention of Size 0 Contacts

Ring Terminal

(Shown for reference only.)

Consult factory for BUS bar contacts availability

Male

Female

Materials:

Contacts: Copper alloy.

Locking Clips: Copper alloy and nylon.

Male Probe Plug : Nylon, UL 94V-O, black color

Finish:

Gold ﬂash over nickel plate.

Consult factory for Silver plating option.

Materials:

Locking clip: Copper alloy with

Nylon, UL 94V-O dielectric overmold,

black color.

Finishes: Gold ﬂash over nickel plate.

Insertion

STEP 2: Lock the

Locking Clip.

Locking Clip Extraction

Dielectric

overmold

STEP 1: Unlock the Locking Clip.

STEP 2: Extract the Contact from Rear Side.

STEP 1: Insert the Contact from Rear Side.

Positronic Industries

www.connectpositronic.com

SERIES

Recommended Tools for Removable Contacts

Recommended Assembly Procedure

For Crimp Termination:

1. Carefully strip back the cable insulation by 20.00mm

[0.787] inch without damaging any of the conductor strands.

2. Insert the conductor wire strands into the crimp barrel at the

rear of the contact. Ensure that all of the conductor wire

strands are captured within the crimp barrel and that the

cable conductor wire is visible through the inspection hole.

3. Utilizing the crimping tool, crimp the contact (as shown)

making sure that the cable remains straight, for a distance of

one meter or the entire length of cable if less than one meter

in length from the crimping die, and touches the contact

stopper while performing the crimp operation as shown in ﬁgure

A and B below.

4. Examine crimp joints to ensure that the crimp is satisfactory.

5. Insert the crimp contact into the insulator and then visually

align the locking clip groove and press in the locking clip.

(As shown in Insertion and Extraction of Size 0 contact on page 7)

6. Ensure that the locking clip is ﬂush with insulator.

Same crimping tool (9504 -21 -0) is used for crimping

‘0’AWG wire and ‘4’ AWG wire

Disclosure Statement:

Positronic Industries cannot be held responsible for

defective crimps when customer utilizes other vendor’s

crimp tools. Samples of ‘0’ AWG wire with strands

combination of 300/26, 478/28, 292/26 have been crimped

and tested at factory and are deemed compatible with

our crimp tool. Consult factory prior to utilizing strands

combinations not called out above.

As per SAE AS 39029

Recommended Tools for Size 12, Size 16 and Size 20 Contacts

Please see Positronic’s SUMO catalog or consult factory for crimping

and wire stripping information on Size 12, 16 and 20 contacts

Positronic Recommended

Conductor Tensile Strength

(Pull Test)

To ensure proper crimp

Contact Extraction

Tool

Cycle-Controlled Step

Adjustable Hand Crimp Tool

Wire Size Axial Load

0 AWG [55 mm2]2803N [630 Ibs.]

4 AWG [25 mm2]1602N [360 Ibs.]

10 AWG [6.0 mm2]601N [135Ibs.]

12 AWG [4.0 mm2]445N [100 Ibs.]

14 AWG [2.5 mm2]267N [ 60 Ibs.]

16 AWG [1.5 mm2]165N [ 37 Ibs.]

20 AWG [0.5 mm2]85N [ 19Ibs.]

Contact

Size

Contact

Extraction Tool Hand Crimp Tool

Size 12 2711-0-0-0 9501 with 9502-19-0-0 positioner

Size 16 9081-6-0-0 9501 with 9502-17-0-0 positioner for Male Contacts

9501 with 9502-26-0-0 positioner for Female Contacts

Size 20 9081-5-0-0 9507 with 9502-21-0-0 positioner for Male Contacts

9507 with 9502-25-0-0 positioner for Female Contacts

Crimping Tool Part Number 9504 -21 -0

Positronic Industries

www.connectpositronic.com

SERIES

Ordering Information

Specify complete connector by following step 1 through step 5.

STEP 1: Basic Series

GG4 : GG Series

STEP 7: Special Options

Consult factory for customization.

STEP 6: Environmental Compliance options

/AA : Compliant per EU Directive 2002/95/EC (RoHS)

Example: GG8567F10/AA

Note: If no environmental options are required,

this step will not be used.

Example: GG8567F10

STEP 5: Mounting Style

0: No hardware.

82: Float mount 1.5 mm panel thickness.

83: Float mount 2.3 mm panel thickness.

E: Turnable male jackscrews .

T: Fixed female jackscrews.

J: Hood.*

EJ: Turnable male jackscrews with Hood.*

TJ: Fixed female jackscrews with Hood.*

*Consult factory for Hood availability.

STEP 4: Type of Contact

1: Removable contact.

Contacts ordered separately.

STEP 3: Connector Gender

F: Female

M: Male

STEPS 2: Connector Version

256 versions available . Specify using Step 2A

through Step 2D. Each Step (2A, 2B,2C, or 2D)

can be any module.

Code 8 : One (1) size 0 power contact.

Code 7: Four (4) size 12 power contacts.

Code 6: Twelve (12) size 16 power contacts.

Code 5 : Nineteen (19) size 20 signal contacts.

Consult factory for the availability of two (2) size 8 power contacts or other contact sizes.

Consult factory for high performance glass-ﬁlled polyester material option.

Part Number Example: GG8568M10 Part Number Example: GG8767M1E

MALE FACE FOR REFERENCE ONLY

STEP 2A

Code 8 = 1ea. Size 0 power contact (Step 2A) Code 8 = 1ea Size 0 power contact (Step 2A)

Code 8 = 1ea Size 0 power contact (Step 2D)

Code 7 = 4ea Size 12 power contacts (Step 2B)

Code 5 = 19ea. Size 20 signal contacts (Step 2B)

Code 7 = 4ea Size 12 power contacts (Step 2D)

Code 6 = 12ea. Size 16 power contacts (Step 2C) Code 6 = 12ea Size 16 power contacts (Step 2C)

STEP 2ASTEP 2B STEP 2BSTEP 2C STEP 2CSTEP 2D STEP 2D

MALE FACE FOR REFERENCE ONLY

1 2A 2B 2C 2D 3 4 5 6 7

GG 8 7 6 8 M 1 0 /AA xxx

Step

Example

MALE MATING FACE FOR REFERENCE ONLY

BCD

NORTH AMERICAN SALES OFFICES

United States, Springeld, Missouri

Factory and Sales Ofce 800 641 4054 info@connectpositronic.com

Puerto Rico Sales Ofce 800 641 4054

Mexico Sales Ofce 800 872 7674

Canada Sales Ofce 800 327 8272

EUROPEAN SALES OFFICES

France, Auch Factory and Sales 33 (0) 5 6263 4491 contact@connectpositronic.com

Northern France Sales Ofce 33 (0) 1 4588 1388 jchalaux@connectpositronic.com

Southern France Sales Ofce 33 (0) 4 6772 8028 plafon@connectpositronic.com

Italy Sales Ofce 39 (0) 2 5411 6106 rmagni@connectpositronic.com

Germany Sales Ofce 49 (0) 23 5163 4739 cbouche@connectpositronic.com

United Kingdom Sales Ofce 44 (0) 7975 682 488 lbridwell@connectpositronic.com

Europe & Middle East Technical Agents:

Finland, United Kingdom, Scotland, Israel, Norway, Sweden, Turkey and the Ukraine.

ASIA / PACIFIC SALES OFFICES

Singapore Factory, Sales and Engineering Ofce

Singapore +65 6842 1419 singapore@connectpositronic.com

Japan +813 5812 7720 japan@connectpositronic.com

South Korea +82 31 909 8047 korea@connectpositronic.com

India +91 20 2439 4810 india@connectpositronic.com

Taiwan +886 2 2937 8775 taiwan@connectpositronic.com

China +86 755 2643 7578

Shanghai shanghai@connectpositronic.com

Shenzhen +86 755 2643 7578 shenzhen@connectpositronic.com

Malaysia +60 4 644 9688

New Zealand +64 3 358 5154 newzealand@connectpositronic.com

Australia +61 2 4362 3477 australia@connectpositronic.com

POSITRONIC INDUSTRIES, INC

423 N Campbell Avenue, P O Box 8247,

Springeld, MO 65801, USA

Telephone: 1 417 866 2322

Fax: 1 417 866 4115

Email: info@connectpositronic.com

POSITRONIC INDUSTRIES, SAS

Zone Industrielle Est, 46 Route d’Engachies,

F32020, Auch Cedex 9, France

Telephone: 33 (0) 5 62 63 44 91

Telecopieur: 33 (0) 5 62 63 51 17

Email: contact@connectpositronic.com

POSITRONIC ASIA PTE LTD

3014A Ubi Road 1 # 07-01 Singapore 408703

Telephone: 65 6842 1419 Fax: 65 6842 1421

Email: singapore@connectpositronic.com