For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11
11 - 234
LINEAR & POWER AMPLIFIERS - SMT
HMC455LP3 / 455LP3E
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
v02.0605
General Description
Features
Functional Diagram
The HMC455LP3 & HMC455LP3E are high output
IP3 GaAs InGaP Heterojunction Bipolar Transistor
(HBT) ½ watt MMIC ampli ers operating between 1.7
and 2.5 GHz. Utilizing a minimum number of external
components the ampli er provides 13 dB of gain and
+28 dBm of saturated power at 56% PAE from a single
+5 Vdc supply voltage. The high output IP3 of +42
dBm coupled with the low VSWR of 1.4:1 make the
HMC455LP3 & HMC455LP3E ideal driver ampli ers for
PCS/3G wireless infrastructures. A low cost, leadless
3x3 mm QFN surface mount package (LP3) houses
the linear ampli er. The LP3 provides an exposed
base for excellent RF and thermal performance.
Output IP3: +42 dBm
Gain: 13 dB
56% PAE @ +28 dBm Pout
+19 dBm W-CDMA Channel Power @ -45 dBc ACP
3x3 mm QFN SMT Package
Electrical Speci cations, TA = +25° C, Vs= +5V
Typical Applications
This ampli er is ideal for high linearity applications:
• Multi-Carrier Systems
• GSM, GPRS & EDGE
• CDMA & WCDMA
• PHS
Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units
Frequency Range 1.7 - 1.9 1.9 - 2.2 2.2 - 2.5 GHz
Gain 11.5 13.5 10.5 13 9 11.5 dB
Gain Variation Over Temperature 0.012 0.02 0.012 0.02 0.012 0.02 dB / °C
Input Return Loss 13 15 10 dB
Output Return Loss 10 18 15 dB
Output Power for 1dB Compression (P1dB) 24 27 24.5 27.5 23 26 dBm
Saturated Output Power (Psat) 28.5 28 27 dBm
Output Third Order Intercept (IP3) 37 40 39 42 37 40 dBm
Noise Figure 7 6 6 dB
Supply Current (Icq) 150 150 150 mA
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
LINEAR & POWER AMPLIFIERS - SMT
11
11 - 235
Input Return Loss vs. Temperature Output Return Loss vs. Temperature
Broadband Gain & Return Loss Gain vs. Temperature
P1dB vs. Temperature Psat vs. Temperature
Data shown is tuned for 1.85 - 2.2 GHz, contact HMC
Applications for recommended 1.7 - 1.85 GHz & 2.2 - 2.5 GHz tuning circuits.
HMC455LP3 / 455LP3E
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
v02.0605
-25
-20
-15
-10
-5
0
5
10
15
1 1.5 2 2.5 3
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
20
21
22
23
24
25
26
27
28
29
30
1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5
+25C
+85C
-40C
P1dB (dBm)
FREQUENCY (GHz)
20
22
24
26
28
30
1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5
+25C
+85C
-40C
Psat (dBm)
FREQUENCY (GHz)
5
8
11
14
17
20
1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5
+25C
+85C
-40C
GAIN (dB)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11
11 - 236
LINEAR & POWER AMPLIFIERS - SMT
Power Compression @ 1.95 GHz
Output IP3 vs. Temperature Noise Figure vs. Temperature
Gain, Power & IP3 vs.
Supply Voltage @ 1.95 GHz
Reverse Isolation vs. Temperature
Power Compression @ 2.15 GHz
Data shown is tuned for 1.85 - 2.2 GHz, contact HMC
Applications for recommended 1.7 - 1.85 GHz & 2.2 - 2.5 GHz tuning circuits.
HMC455LP3 / 455LP3E
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
v02.0605
30
32
34
36
38
40
42
44
1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5
+25C
+85C
-40C
IP3 (dBm)
FREQUENCY (GHz)
0
10
20
30
40
50
60
-10 -5 0 5 10 15 20
Pout
Gain
PAE
Pout (dBm), GAIN (dB), PAE (%)
INPUT POWER (dBm)
8
12
16
20
24
28
32
36
40
44
4.5 4.7 5 5.2 5.5
Gain
P1dB
Psat
IP3
Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
Vs (V)
-30
-25
-20
-15
-10
-5
0
1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5
+25C
+85C
-40C
ISOLATION (dB)
FREQUENCY (GHz)
0
1
2
3
4
5
6
7
8
9
10
1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5
+25C
+85C
-40C
NOISE FIGURE (dB)
FREQUENCY (GHz)
0
10
20
30
40
50
60
-10 -5 0 5 10 15 20
Pout
Gain
PAE
Pout (dBm), GAIN (dB), PAE (%)
INPUT POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
LINEAR & POWER AMPLIFIERS - SMT
11
11 - 237
ACPR vs. Supply Voltage @ 1.96 GHz
CDMA 2000, 9 Channels Forward
ACPR vs. Supply Voltage @ 2.14 GHz
W-CDMA, 64 DPCH
Absolute Maximum Ratings
Collector Bias Voltage (Vcc) +6.0 Vdc
RF Input Power (RFIN)(Vs = +5Vdc) +25 dBm
Junction Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 16 mW/°C above 85 °C) 1.04 W
Thermal Resistance
(junction to ground paddle) 63 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
HMC455LP3 / 455LP3E
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
v02.0605
-65
-60
-55
-50
-45
-40
5 7 9 11 13 15 17 19 21
ACPR (dBc)
Channel Output Power (dBm)
Source ACPR
CDMA2000 Rev. 8
Frequency: 1.96 GHz
Integration BW: 1.228 MHz
Forward Link, SR1, 9 Channels
5.5V
4.5V 5V
-65
-60
-55
-50
-45
-40
-35
-30
5 7 9 11 13 15 17 19 21
ACPR (dBc)
Channel Output Power (dBm)
Source ACPR
WCDMA
Frequency : 2.14 GHz
Integration BW: 3.84 MHz
64 DPCH 4.5V
5V
5.5V
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Application Circuit
Recommended Component Values
L1 8.2 nH
C1 2.2 µF
C2, C3 3.0 pF
C4 0.9 pF
C5 100 pF
Data shown is tuned for 1.85 - 2.2 GHz, contact HMC
Applications for recommended 1.7 - 1.85 GHz & 2.2 - 2.5 GHz tuning circuits.
TL1 TL2 TL3 TL4
Impedance 50 Ohm 50 Ohm 50 Ohm 50 Ohm
Physical Length 0.33” 0.18” 0.13” 0.04”
Electrical Length 34° 19° 13.5° 4°
PCB Material: 10 mil Rogers 4350, Er = 3.48
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11
11 - 238
LINEAR & POWER AMPLIFIERS - SMT
Pin Descriptions
Pin Number Function Description Interface Schematic
1, 2, 4 - 9,
11 - 16 N/C This pin may be connected to RF ground.
3 RFIN
This pin is AC coupled.
An off chip series matching capacitor is required.
10 RFOUT RF output and DC Bias for the output stage.
GND Package bottom must be connected to RF/DC ground.
HMC455LP3 / 455LP3E
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
v02.0605
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC455LP3 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] 455
XXXX
HMC455LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] 455
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
LINEAR & POWER AMPLIFIERS - SMT
11
11 - 239
HMC455LP3 / 455LP3E
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
v02.0605
Evaluation PCB
The circuit board used in the nal application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of VIA holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
List of Materials for Evaluation PCB 106058 [1]
Item Description
J1 - J2 PCB Mount SMA Connector
J3 2 mm DC Header
C1 2.2 μF Capacitor, Tantalum
C2, C3 3.0 pF Capacitor, 0402 Pkg.
C4 0.9 pF Capacitor, 0402 Pkg.
C5 100 pF Capacitor, 0402 Pkg.
L1 8.2 nH Inductor, 0402 Pkg.
U1 HMC455LP3 / HMC455LP3E
Power Ampli er
PCB [2] 106492 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evalution PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
Pin Number Description
1, 2, 3 GND
4, 5, 6 Vs
J3
Data shown is tuned for 1.85 - 2.2 GHz, contact HMC
Applications for recommended 1.7 - 1.85 GHz & 2.2 - 2.5 GHz tuning circuits.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
