Multilayer Balanced Band Pass Filter Part Number : DEA202450BT-7041E1 [FEATURES] [PIN CONFIGURATION] Top View Miniature Balanced Band Pass Filter Matched to CSR BC4 IC Package size: 2.0 x 1.25mm Low Profile : 0.7mm max. height Unbalanced I/O 1 GND 8 6 GND DC feed 2 NC 3 7 Balanced I/O 4 GND 5 Balanced I/O Fig 1 [MECHANICAL DIMENSIONS] Top View 0.7 Max 1.25 +/-0.15 2.0+/-0.15 8 1 7 2 6 3 5 4 Unit : mm Bottom View 0.3+/-0.2 0.3+/-0.2 0.65+/-0.15 0.35+/-0.15 0.2+/-0.2 0.25+/-0.2 Fig 2 DEA202450BT-7041E1 All specifications are subject to change without notice. Feb 2007 Ver. 12b [ELECTRICAL PERFORMANCE] Temperature +25OC unless otherwise specified Parameter Freq. (MHz) TDK Specification Unit Insertion Loss 2402 - 2480 5.0 max. dB Single ended port characteristic impedance - Matched to CSR BC4 IC Reference board ohm Balanced ports impedance, nominal value - Matched to CSR BC4 IC Reference board ohm 10 min dB 10 min dB 880 - 960 35 min dB 1710 - 1880 25 min dB 1880 - 1990 25 min dB 2110 - 2170 20 min dB 4804 - 4960 30 min dB Phase Difference at Balanced Port 2402 - 2480 180 15.0 Deg. Amplitude Imbalance at Balanced Port 2402 - 2480 0 2.0 dB Return Loss: Unbalanced port Return Loss: Balanced port (with respect to nominal balanced impedance) Attenuation O 2402 - 2480 O Storage Temperature : -40 C to +85 C DEA202450BT-7041E1 All specifications are subject to change without notice. Feb 2007 Ver. 12b [LAND PATTERN (TDK Recommended)] 2.60 mm 0.60 mm 0.35 mm 1.95 mm 0.55 mm 0.20 mm 0.65 mm 0.35 mm Fig 3 Note1: Pin 2 of the filter provides a DC feed connection to the balanced ports. In the event that this function is used, Pin 2 should be connected to ground using a 15pF de-coupling capacitor. Note2: In the event that the pin 2 function is not used, the pin should be left unconnected. [PCB TOP METAL LAYER] Exposed copper areas BAL Ground Plane 0. 1m m m 3m 1.1 W Ground Via UNBAL BAL 0.50mm m 07m 0.7 W 0.1mm Routing Via W 0.19mm 0.50mm 0.8mm PCB Parameters: Material: FR4 DC feed capacitor Lower layer trace Top metal to GND layer height: 0.1mm DC feed cap value: 15pF Fig 4 DEA202450BT-7041E1 All specifications are subject to change without notice. Feb 2007 Ver. 12b [TAPE & REEL INFORMATION] Carrier Tape Sprocket hole J Loading Direction B D A C E K t H G F A B C D E F 1.550.1 2.250.1 8.00.2 3.50.05 1.750.1 4.00.1 G H J K T 2.00.05 4.00.1 1.550.05 1.00.05 0.3 max Unit: mm Fig 5 Reel Dimensions 130.5 131.4 2.00.5 602.0 Label 210.5 1782.0 90.3 Unit : mm Standard package quantities: 2000pcs/reel Fig 6 DEA202450BT-7041E1 All specifications are subject to change without notice. Feb 2007 Ver. 12b [RoHS STATEMENT] "In conformity with EU directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium and specific bromine-based flame retardants, PBB and PBDE, have not been used in the materials of this part." [CONTACT INFORMATION] Any inquires about this part can be addressed to the following TDK sales representatives: Mr. Conor Duffy. Email: cduffy@tdk.de Mr. Graeme Cruickshanks. Email: Cruickshanks@tdk.de [END OF DOCUMENT] DEA202450BT-7041E1 All specifications are subject to change without notice. Feb 2007 Ver. 12b