STARJACK TM 1x1 Tab-DOWN RJ45 www.pulseeng.com Description: 10/100 Base-TX RJ45 1x1 Tab-DOWN 8-pin Integrated Magnetics Connector, without LEDs, designed to support high volume cost-conscious consumer applications such as: ADSL modems, Cable modems, STB and Video on Demand. Features and Benefits: RoHS "NL" peak solder rating 260C, non-RoHS peak solder rating 235C For RoHS part, add suffix NL7 Low cost 1x1 Tab-DOWN RJ45 with internal magnetics Available with or without LEDs Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP Internal magnetics are 100% electrically tested for HI-POT and functionality Electrical Performance Summary: Meets IEEE 802.3 specification 350H minimum OCL with 8mA bias current High performance for Max EMI suppression for cost-conscious applications Minimum 1500Vrms isolation per IEEE 802.3 requirement 10 Base-T Electrical Specifications @ 25C -- Operating Temperature 0C to +70C Part Number J00-0025 4,5 J00-0051 4,5 J00-0062 4,5 J00-0063 4,5 Turns1 Ratios Data Rate RoHS 7 8 10BT 10BT 10BT 10BT 8 8 8 EMI 2 TX RX 1CT:2.5 1CT:2.5 1CT:2.5 1CT:2.5 1CT:1 1CT:1 1CT:1 1CT:1 Fingers LEDs 3 (L/R) BST 6 Yes Yes No No None G/Y None G/Y No No No No Insertion Loss (dB MAX) Return Loss (dB MIN) 100 15 Crosstalk (dB MIN) Common Mode Rejection (dB MIN) Hipot (Vrms) 1-10MHz 1-10MHz 1-10MHz 5MHz @60Hz 1 MIN -1 -1 -1 -1 -15 -15 -15 -15 -30 -30 -30 -30 -25 -25 -25 -25 1500 1500 1500 1500 10/100 Base-T Electrical Specifications @ 25C -- Operating Temperature 0C to +70C Part Number RoHS 7 Data Rate Turns1 Ratios TX EMI 2 LEDs 3 Fingers (L/R) BST RX Insertion Loss (dB MAX) 1-65MHz Return Loss (dB MIN) 100 15 1-10MHz 8 J00-0014 5 100BT 1CT:1 1CT:1 No None Yes -1 -18 8 J00-0042 5 100BT 1CT:1 1CT:1 No None No -1 -18 8 J00-0045 5 100BT 1CT:1 1CT:1 No G/Y Yes -1 -18 5 8 J00-0046 100BT 1CT:1 1CT:1 No G/Y No -1 -18 8 J00-0061 5 100BT 1CT:1 1CT:1 Yes None Yes -1 -18 8 J00-0064 5 100BT 1CT:1 1CT:1 Yes None No -1 -18 J00-0065 5 NL 100BT 1CT:1 1CT:1 Yes G/Y Yes -1 -18 8 J00-0066 5 100BT 1CT:1 1CT:1 Yes G/Y No -1 -18 8 J00-0086 5 100BT 2CT:1 2CT:1 Yes G/Y No -1 -18 Notes: 1. Both transmit and receive channels meet IEEE 802.3 specifications. 2. For an explanation of EMI fingers, refer to the mechanical drawing page. 3. LEDs Left/Right: G=green, Y=yellow 4. IEEE802.3i (10Base-T) standard does not require these parts to achieve 350H minimum OCL with 8mA bias current for 10Base-T parts. 10-30MHz 30-60MHz Common Mode Rejection (dB MIN) Crosstalk (dB MIN) 60-80MHz 1-30MHz 30-60MHz 60-100MHz Hipot (Vrms) 1-50MHz 50-150MHz @60Hz 1 MIN -14 -12 -10 -35 -35 -30 -20 -15 1500 -14 -12 -10 -35 -35 -30 -20 -15 1500 -14 -12 -10 -35 -35 -30 -20 -15 1500 -14 -12 -10 -35 -35 -30 -20 -15 1500 -14 -12 -10 -35 -35 -30 -20 -15 1500 -14 -12 -10 -35 -35 -30 -20 -15 1500 -14 -12 -10 -35 -35 -30 -20 -15 1500 -14 -12 -10 -35 -35 -30 -20 -15 1500 -14 -12 -10 -35 -35 -30 -20 -15 1500 5. AutoMDX compatible 100Base-T and 10Base-T connector modules. 6. Capacitor resistor termination circuit included within these parts. 7. Add suffix "NL" for RoHS compliant parts (e.g. J00-0065 changes to J00-0065NL). 8. Contact Pulse for RoHS compliant part availability. RJ45 Durability Testing Rating Part Number Mating Force (MAX) Unmating Force (MAX) Durability Plug to Jack Retention (MIN) J00 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs. RJ45 Material Specification Part Number J00 Series Shield Material Brass Finish 20-40m inches Nickel over 10-20m inches Brass Contact Housing Material Plating Area Solder Area Material Specification MSL3 Rating Phosphor Bronze Nickel underplating and selective gold plating 15 inches 120 inches Sn90/Pb10 over 50 inches nickel Thermoplastic UL 94 V-0 1 NOTES: 1.All connector part numbers starting with the series prefix J00 comply to the above limits. 2. Connector dimensions comply with FCC dimension requirements.. 3. MSL - Moisture Sensitivity Level class limits = 1 to 5 (Highest: 1; Lowest: 5). US 619 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Taiwan 886 2 2698 0228 * Hong Kong 852 2788 6588 * http://www.pulseeng.com 1 J414.B (1/05) STARJACK TM 1x1 Tab-DOWN RJ45 www.pulseeng.com J00-00XX Series Mechanicals .850 21,59MAX EMI Fingers .640 16,26 .290 7,37 .125 .020 3,18 0,51 .545 13,84 LEFT LED Part Number Location JXXXXXXXX Date Code SIGNAL PINS FRONT RIGHT LED TM .125 .020 3,18 0,51 HOUSING POST .135 .020 3,43 0,51 .140 3,56 SHIELD PIN FRONT VIEW Patent Pending BACK .425 10,80 Connector Marking (An example - parts are marked on the top or end surface as shown) SIDE VIEW 4X R .010 MAX R 2.54 0,25 6,45 .660 16,76 .620 15,75 Country of Origin Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 .498 12,65 .450 11,43 .560 14,22 .398 10,11 .100 2,54 FRONT 4X 2X .133 3,38 11 12 10 9 7 8 .100 2,54 5 6 3 4 BACK .350 8,89 .024 0,61 .040 1,02 .128 3,25 HOUSING POST 2X .064 SHIELD PIN 1,63 .120 3,05 .193 4,90 .010 TOP OF PCB 0,25 TO BOTTOM OF OPENING LED Configuration Green / Yellow LED Specification - (LEDs without internal resistors) .250 6,35 1 2 .050 1,27 8X .035 0,89 Left LED 9 10 Right LED 12 11 .003 0,08 Standard LED Wavelength Forward* V(MAX) (TYP) Yellow Green 585 nm 565 nm 2.5 V 2.5 V 2.1 V 2.2 V Viewed from PCB Component side * Assumes bias current = 20mA J00-00XX Series Electrical Schematics J00-0014/45/61/65 TD+ 1 1 TX+ CT 4 1CT : 1 RECEIVE 3 RX+ CT 5 75 4 5 2 TX- 1CT : 1 TRANSMIT RD+ 3 RD- 6 6 RX- 1CT : 1 RECEIVE 75 7 GND* 8 8 *Connecting pin 8 to Ground makes J00-0042/46/64/66 footprint compatible to J00-0014/45/61/65. **J00-0086 Turns Ratio TX, RX = 1.414CT:1 ( 2CT:1) TD- 2 5 0.001mF 75 8 2 TX3 RX+ CT 8 RD- 6 4 7 CHS GROUND 8 1CT : 2.5 TRANSMIT RD+ 3 4 NC 7 1 TX+ CT 7 PCB SIDE TO PHY 6 RX- TD- 2 CABLE SIDE 3 RX+ CT 5 7 TD+ 1 75 2 TX- PCB SIDE TO PHY 1CT : 1 TRANSMIT RD+ 3 RD- 6 1 TX+ CT 4 CABLE SIDE PCB SIDE TO PHY TD- 2 J00-0025/51/62/63 TD+ 1 6 RX- 1CT : 1 RECEIVE CABLE SIDE J00-0042/46/64/66/86 4 5 7 5 8 NOTE: Connect CHS GND to PCB ground. US 619 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Taiwan 886 2 2698 0228 * Hong Kong 852 2788 6588 * http://www.pulseeng.com 2 J414.B (1/05) STARJACK TM 1x1 Tab-DOWN RJ45 www.pulseeng.com Application Notes Advantages of the PulseJack Modules Increased Reliability Consistent Electrical and Magnetic Performance Pulse developed a patented method for ensuring the quality, consistency, and connection integrity of encapsulated coils and other three-dimensional electronic components. The InterLock Base consists of an internal plastic carrier that holds the coil firmly in place and provides precisely engineered "lead-channels" to lock together the lead wires and the leadframe pins. All of the InterLock Base interconnections are then simultaneously dip soldered, providing for both efficiency and uniformity for best common mode rejection and crosstalk. * With internal magnetics specifically oriented on all parts, there are more consistent readings on all functional tests. This is optimized for best crosstalk, common mode rejection and return loss. * With the selection of common mode material and winding techniques, common mode noise rejection maintains integrity at higher frequencies. * Multiple tabs around shield-to-ground, shield-to-chassis, and shunt noise to ground improves EMI suppression. Higher Manufacturing Yields Because of this Pulse patented higher reliability method, there is less of a chance of opens and shorts, thus providing higher yields. For More Information: UNITED STATES (Worldwide) UNITED KINGDOM (Northern Europe) FRANCE (Southern Europe) SINGAPORE (Southern Asia) TAIWAN, R.O.C. (Northern Asia) HONG KONG (China/Hong Kong) 12220 World Trade Drive San Diego, CA 92128 U.S.A. http://www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 3 Huxley Road Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 TEL: 65 6287 8998 FAX: 65 6280 0080 3F-4, No. 81, Sec. 1 HsinTai Wu Road Hsi-Chih, Taipei Hsien Taiwan, R.O.C. Tel: 886 2 2698 0228 FAX: 886 2 2698 0948 Unit 11, 11/F Wah Lai Industrial Centre 10-14 Kwei Tei Street, Fotan, Shatin, Hong Kong TEL: 852 2788 6588 FAX: 852 2776 1055 DISTRIBUTOR Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c)2005, Pulse Engineering, Inc. All Rights Reserved. 3 J414.B (1/05)