4 fo 1 egaP 00.1.veR 0010JE9600SD80R
Jan 29, 2013
Data Sheet
NX8602BF-AA
LASER DIODE
1 650 nm InGaAsP MQW-DFB LASER DIODE COAXIAL MODULE FOR OTDR APPLICATION
DESCRIPTION
The NX8602BF-AA is a 1 650 nm Multiple Quantum Well (MQW) structured
Distributed Feed-Back (DFB) pulsed laser diode coaxial module with single
mode fiber. This module is specified to operate under pulsed condition and
designed for light source of Optical Time Domain Reflectometer (OTDR).
FEATURES
•Distributed Feed-Back (DFB) pulsed laser diode
•High output power Pf = 80 mW @ IFP = 450 mA, PW = 10
μ
s, Duty = 1%
•Wavelength λp = 1 650 nm
•Single mode fiber pigtail
R08DS0069EJ0100
Rev.1.00
Jan 29, 2013
A Business Partner of Renesas Electronics Corporation.
NX8602BF-AA
R08DS0069EJ0100 Rev.1.00 Page 2 of 4
Jan 29, 2013
PACKAGE DIMENSIONS (UNIT: mm)
PIN CONNECTIONS
φ
0.9
φ
7.0
26.514.5 4
12.7
17.0
φ
0.45
φ
2.22 –
7.2
3.7
1
P.C.D. = 2
φ
1
43
2
Optical Fiber
SMF
Length: 1 m MIN.
CASE
21 LD
OPTICAL FIBER CHARACTERISTICS
Parameter Specification Unit
Mode Field Diameter 9.3 ±0.5
μ
m
Cladding Diameter 125 ±2
μ
m
Maximum Cladding Non-circularity 2 %
Maximum Core/Cladding
Concentricity
1.6 %
Outer Diameter 0.9 ±0.1 mm
Cut-off Wavelength 1 100 to 1 280 nm
Minimum Fiber Bending Radius 30 mm
Fiber Length 1 000 MIN. mm
Ferrule
Fiber Length: 1 000 mm MIN.
A Business Partner of Renesas Electronics Corporation.
NX8602BF-AA
R08DS0069EJ0100 Rev.1.00 Page 3 of 4
Jan 29, 2013
ORDERING INFORMATION
Part Number Flange Type
NX8602BF-AA-AZ flat mount flange
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
Pulsed Forward Current*1 I
FP 600 mA
Reverse Voltage VR 2.0 V
Operating Case Temperature TC 0 to +60 °C
Storage Temperature Tstg −40 to +85 °C
Lead Soldering Temperature Tsld 350 (3 sec.) °C
Relative Humidity (noncondensing) RH 85 %
Note: *1 Pulse Condition: Pulse Width (PW) = 10 μs, Duty = 1%
ELECTRO-OPTICAL CHARACTERISTICS (TC = 25°C,
unless otherwise specified)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Forward Voltage VFP IFP = 450 mA,
PW = 10
μ
s, Duty = 1%
2.5 3.0 V
Threshold Current Ith CW 20 60 mA
IFP = 450 mA, PW = 10
μ
s,
Duty = 1%
50 80
Optical Output Power from
Fiber
Pf
IFP = 450 mA, PW = 10
μ
s,
Duty = 1%
TC = 0 to +60°C
25
mW
Center Wavelength λp IFP = 450 mA, PW = 10
μ
s,
Duty = 1%
1 645 1 650 1 655 nm
A Business Partner of Renesas Electronics Corporation.
NX8602BF-AA
R08DS0069EJ0100 Rev.1.00 Page 4 of 4
Jan 29, 2013
SAFETY INFORMATION ON THIS PRODUCT
DANGER
INVISIBLE LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
OUTPUT POWER mW MAX
WAVELENGTH nm
CLASS lllb LASER PRODUCT
AVOID EXPOSURE-Invisible
Laser Radiation is emitted from
this aperture
SEMICONDUCTOR LASER
Warning Laser Beam A laser beam is emitted from this diode during operation.
The laser beam, visible or invisible, directly or indirectly, may cause injury to the eye or loss of
eyesight.
• Do not look directly into the laser beam.
• Avoid exposure to the laser beam, any reflected or collimated beam.
Caution GaAs Products This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
•Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
Caution Optical Fiber A glass-fiber is attached on the product. Handle with care.
• When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part
or fragments.
A Business Partner of Renesas Electronics Corporation.
All trademarks and registered trademarks are the property of their respective owners.
C - 1
Revision History NX8602BF-AA Data Sheet
Description
Rev. Date Page Summary
1.00 Jan 29, 2013 − First edition issued
NOTICE
1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and
application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California
Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits,
software, or information.
2. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does
not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
3. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property
rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express,
implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas
Electronics or others.
4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern
Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modication, copy
or otherwise misappropriation of Renesas Electronics product.
5. Renesas Electronics products are classied according to the following two quality grades: “Standard” and “High Quality”. The recommended applications
for each Renesas Electronics product depends on the product’s quality grade, as indicated below. “Standard”: Computers; ofce equipment; communications
equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and
industrial robots etc. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); trafc control systems; anti-disaster systems; anti-crime
systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct
threat to human life or bodily injury (articial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear
reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas
Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product
for which the product is not intended by California Eastern Laboratories or Renesas Electronics.
6. You should use the Renesas Electronics products described in this document within the range specied by California Eastern Laboratories, especially with
respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product
characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products
beyond such specied ranges.
7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specic characteristics such as
the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation
resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by
re in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy,
re control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of
microcomputer software alone is very difcult, please evaluate the safety of the nal products or systems manufactured by you.
8. Please contact a California Eastern Laboratories sales ofce for details as to environmental matters such as the environmental compatibility of each Renesas
Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of
controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for
damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document
for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When
exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics
product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and
Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories.
12. Please contact a California Eastern Laboratories sales ofce if you have any questions regarding the information contained in this document or Renesas
Electronics products, or if you have any other inquiries.
NOTE 1: “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
NOTE 2: “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
NOTE 3: Products and product information are subject to change without notice.
CEL Headquarters • 4590 Patrick Henry Drive, Santa Clara, CA 95054 • Phone (408) 919-2500 • www.cel.com
For a complete list of sales ofces, representatives and distributors,
Please visit our website: www.cel.com/contactus
