SPEC NO: DSAD9370 REV NO: V.8A DATE: MAY/13/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000770
30.6mm (1.2 INCH) 5x7 DOT MATRIX DISPLAY
Part Number: TC12-11CGKWA Green
Features
z1.2 inch matrix height.
zDot size 3mm.
zLow current operation.
zHigh contrast and light output.
zColumn cathode and column anode available.
zEasy mounting on P.C. boards or sockets.
zMechanically rugged.
zStandard : gray face, white dot.
zRoHS compliant.
Description
The Green source color devices are made with AlGaInP on
GaAs substrate Light Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAD9370 REV NO: V.8A DATE: MAY/13/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000770
Selection Guide
Notes:
1. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25° C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type Iv (ucd) [1]
@ 10mA Description
Min. Typ.
TC12-11CGKWA Green (AlGaInP) White Diffused
31000 73000
*14000 *27000
Column Cathode
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 574 nm IF=20mA
λD [1] Dominant Wavelength Green 570 nm IF=20mA
Δλ1/2 Spectral Line Half-width Green 20 nm IF=20mA
C Capacitance Green 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA
IR Reverse Current Green 10 uA VR=5V
Parameter Green Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
SPEC NO: DSAD9370 REV NO: V.8A DATE: MAY/13/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000770
Green TC12-11CGKWA
SPEC NO: DSAD9370 REV NO: V.8A DATE: MAY/13/2013 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000770
PACKING & LABEL SPECIFICATIONS TC12-11CGKWA
SPEC NO: DSAD9370 REV NO: V.8A DATE: MAY/13/2013 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000770
SPEC NO: DSAD9370 REV NO: V.8A DATE: MAY/13/2013 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000770
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes