To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
Caution Electro-static sensitive devices
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
3 V, SUPER MINIMOLD SILICON MMIC
MEDIUM OUTPUT POWER AMPLIFIER
FOR MOBILE COMMUNICATIONS
DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUITS
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
The mark shows major revised points.
Document No. P12710EJ3V0DS00 (3rd edition)
Date Published February 2001 N CP(K)
Printed in Japan
1997, 2001©
DESCRIPTION
The
µ
PC2762TB,
µ
PC2763TB and
µ
PC2771TB are silicon monolithic integrated circuits designed as amplifier for
mobile communications. These ICs operate at 3 V. The medium output power is suitable for RF-TX of mobile
communications system.
These IC is manufactured using NEC’s 20 GHz fT NESAT™III silicon bipolar process. This process uses direct
silicon nitride passivation film and gold electrodes. These materials can protect the chip surface from pollution and
prevent corrosion/migration. Thus, this IC has excellent performance, uniformity and reliability.
FEATURES
• Supply voltage : VCC = 2.7 to 3.3 V
• Medium output power :
µ
PC2762TB; PO(1 dB) = +8.0 dBm TYP. @ f = 0.9 GHz
µ
PC2763TB; PO(1 dB) = +9.5 dBm TYP. @ f = 0.9 GHz
µ
PC2771TB; PO(1 dB) = +11.5 dBm TYP. @ f = 0.9 GHz
• Power gain :
µ
PC2762TB; GP = 13 dB TYP. @ f = 0.9 GHz
µ
PC2763TB; GP = 20 dB TYP. @ f = 0.9 GHz
µ
PC2771TB; GP = 21 dB TYP. @ f = 0.9 GHz
• Upper limit operating frequency :
µ
PC2762TB; fu = 2.9 GHz TYP. @ 3dB Bandwidth
µ
PC2763TB; fu = 2.7 GHz TYP. @ 3dB Bandwidth
µ
PC2771TB; fu = 2.2 GHz TYP. @ 3dB Bandwidth
• High-density surface mounting : 6-pin super minimold package (2.0 × 1.25 × 0.9 mm)
APPLICATIONS
• Buffer amplifiers for mobile telephones:
µ
PC2762TB,
µ
PC2763TB
• PA driver for PDC800M :
µ
PC2771TB
ORDERING INFORMATION
Part Number Package Marking Supplying Form
µ
PC2762TB-E3 6-pin super minimold C1Z
µ
PC2763TB-E3 C2A
µ
PC2771TB-E3 C2H
Embossed tape 8 mm wide.
1, 2, 3 pins face the perforation side of the tape.
Qty 3 kpcs/reel.
Remark To order evaluation samples, please contact your local NEC sales office.
Part number for sample order:
µ
PC2762TB,
µ
PB2763TB,
µ
PC2771TB
Data Sheet P12710EJ3V0DS
2
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
PIN CONNECTIONS
3
2
1
4
C1Z
(Top View)
5
6
4
5
6
3
(Bottom View)
2
1
Marking is an example of
µ
PC2762TB
PRODUCT LINE-UP (TA = +25°C, VCC = Vout = 3.0 V, ZS = ZL = 50 Ω
ΩΩ
Ω)
Part No. fu
(GHz)
PO(1 dB)
(dBm)
GP
(dB)
ICC
(mA) Package Marking
µ
PC2762T 2.9 +8.0 @ f = 0.9 GHz 13.0 @ f = 0.9 GHz 26.5 6-pin minimold C1Z
µ
PC2762TB +7.0 @ f = 1.9 GHz 15.5 @ f = 1.9 GHz 6-pin super minimold
µ
PC2763T 2.7 +9.5 @ f = 0.9 GHz 20.0 @ f = 0.9 GHz 27.0 6-pin minimold C2A
µ
PC2763TB +6.5 @ f = 1.9 GHz 21.0 @ f = 1.9 GHz 6-pin super minimold
µ
PC2771T 2.2 +11.5 @ f = 0.9 GHz 21.0 @ f = 0.9 GHz 36.0 6-pin minimold C2H
µ
PC2771TB +9.5 @ f = 1.5 GHz 21.0 @ f = 1.5 GHz 6-pin super minimold
µ
PC8181TB 4.0 +8.0 @ f = 0.9 GHz 19.0 @ f = 0.9 GHz 23.0 6-pin super minimold C3E
+7.0 @ f = 1.9 GHz 21.0 @ f = 1.9 GHz
+7.0 @ f = 2.4 GHz 22.0 @ f = 2.4 GHz
µ
PC8182TB 2.9 +9.5 @ f = 0.9 GHz 21.5 @ f = 0.9 GHz 30.0 6-pin super minimold C3F
+9.0 @ f = 1.9 GHz 20.5 @ f = 1.9 GHz
+8.0 @ f = 2.4 GHz 20.5 @ f = 2.4 GHz
Remark Typical performance. Please refer to ELECTRICAL CHARACTERISTICS in detail.
Caution The package size distinguishes between minimold and super minimold.
Pin No. Pin Name
1 INPUT
2GND
3GND
4OUTPUT
5GND
6V
CC
Data Sheet P12710EJ3V0DS 3
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
SYSTEM APPLICATION EXAMPLE
Digital cellular telephone
DEMOD.
PLL
Phase
shifter
0°
90°
I
Q
I
Q
PA
SW
TX
RX
PLL
÷N
µ
: PC2762TB, 2763TB, 2771TB applicable
Caution The insertion point is different due to the specifications of conjunct devices.
Data Sheet P12710EJ3V0DS
4
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
PIN EXPLANATION
Pin
No. Pin Name
Applied
Voltage
(V)
Pin
Voltage
(V)Note Function and Applications Internal Equivalent Circuit
1.31
1.01
1 INPUT –
0.97
Signal input pin. A internal
matching circuit, configured with
resistors, enables 50 Ω
connection over a wide band.
A multi-feedback circuit is
designed to cancel the
deviations of hFE and resistance.
This pin must be coupled to
signal source with capacitor for
DC cut.
2
3
5
GND 0 – Ground pin. This pin should be
connected to system ground
with minimum inductance.
Ground pattern on the board
should be formed as wide as
possible.
All the ground pins must be
connected together with wide
ground pattern to decrease
impedance difference.
4 OUTPUT Voltage
as same
as VCC
through
external
inductor
– Signal output pin. The inductor
must be attached between VCC
and output pins to supply
current to the internal output
transistors.
6V
CC 2.7 to 3.3 – Power supply pin, which biases
the internal input transistor.
This pin should be externally
equipped with bypass capacitor
to minimize its impedance.
6
4
1
5
*
* PC2762TB does not have
this capacitance.
µ
2
3
Note Pin voltage is measured at VCC = 3.0 V. Above:
µ
PC2762TB, Center:
µ
PC2763TB, Below:
µ
PC2771TB.
Data Sheet P12710EJ3V0DS 5
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
ABSOLUTE MAXIMUM RATINGS
Ratings
Parameter Symbol Conditions
µ
PC2762TB
µ
PC2763TB
µ
PC2771TB Unit
Supply Voltage VCC TA = +25°C, pin 4 and pin 6 3.6 V
Total Circuit Current ICC TA = +25°C 70 77.7 mA
Power Dissipation PDMounted on double copper clad
50 × 50 × 1.6 mm epoxy glass PWB,
TA = +85°C
270 mW
Operating Ambient Temperature TA−40 to +85 °C
Storage Temperature Tstg −55 to +150 °C
Input Power Pin TA = +25°C+10+13dBm
RECOMMENDED OPERATING RANGE
Parameter Symbol MIN. TYP. MAX. Unit Remark
Supply Voltage VCC 2.7 3.0 3.3 V Same voltage should be applied to
pin 4 and pin 6.
Operating Frequency fopt 0.8 −1.9 GHz Only for
µ
PC2771TB
Data Sheet P12710EJ3V0DS
6
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
ELECTRICAL CHARACTERISTICS
(Unless otherwise specified, TA = +25°C, VCC = Vout = 3.0 V, ZS = ZL = 50 Ω
ΩΩ
Ω)
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB
µ
PC2762TB
µ
PC2763TB Unit
Parameter Symbol Test Conditions MIN. TYP. MAX. MIN. TYP. MAX.
Circuit Current ICC No signal −26.5 35.0 −27.0 35.0 mA
Power Gain GPf = 0.9 GHz
f = 1.9 GHz
11
11.5
13
15.5
16
17.5
18
18
20
21
23
24
dB
Noise Figure NF f = 0.9 GHz
f = 1.9 GHz
−
−
6.5
7.0
8.0
9.0
−
−
5.5
5.5
7.0
7.5
dB
Upper Limit Operating
Frequency
fu3 dB down below from
gain at f = 0.1 GHz
2.7 2.9 −2.3 2.7 −GHz
Isolation ISL f = 0.9 GHz
f = 1.9 GHz
22
20
27
25
−
−
25
24
30
29
−
−
dB
Input Return Loss RLin f = 0.9 GHz
f = 1.9 GHz
6.0
5.5
9.0
8.5
−
−
8.0
8.0
11.0
11.0
−
−
dB
Output Return Loss RLout f = 0.9 GHz
f = 1.9 GHz
8.0
9.0
11.0
12.0
−
−
5.0
6.0
7.0
9.0
−
−
dB
1 dB Gain Compression Output
Power
PO (1 dB) f = 0.9 GHz
f = 1.9 GHz
+5.5
+4.5
+8.0
+7.0
−
−
+7.0
+4.0
+9.5
+6.5
−
−
dBm
µ
µµ
µ
PC2771TB
µ
PC2771TB Unit
Parameter Symbol Test Conditions MIN. TYP. MAX.
Circuit Current ICC No signal −36.0 45.0 mA
Power Gain GPf = 0.9 GHz
f = 1.5 GHz
19
18
21
21
24
24
dB
Noise Figure NF f = 0.9 GHz
f = 1.5 GHz
−
−
6.0
6.0
7.5
7.5
dB
Upper Limit Operating
Frequency
fu3 dB down below from gain at f = 0.1 GHz 1.8 2.2 −GHz
Isolation ISL f = 0.9 GHz
f = 1.5 GHz
25
25
30
30
−
−
dB
Input Return Loss RLin f = 0.9 GHz
f = 1.5 GHz
10
10
14
14
−
−
dB
Output Return Loss RLout f = 0.9 GHz
f = 1.5 GHz
6.5
5.5
9.0
8.5
−
−
dB
1 dB Gain Compression Output
Power
PO (1 dB) f = 0.9 GHz
f = 1.5 GHz
+9.0
+7.0
+11.5
+9.5
−
−
dBm
Saturated Output Power PO (sat) f = 0.9 GHz
f = 1.5 GHz
−
−
+12.5
+11.0
−
−
dBm
Data Sheet P12710EJ3V0DS 7
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
STANDARD CHARACTERISTICS FOR REFERENCE
(Unless otherwise specified, TA = +25°C, VCC = Vout = 3.0 V, ZS = ZL = 50 Ω
ΩΩ
Ω)
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB
Reference
µ
PC2762TB
µ
PC2763TBParameter Symbol Test Conditions
MIN. TYP. MAX. MIN. TYP. MAX.
Unit
Saturated
Output Power
PO (sat) f = 0.9 GHz
f = 1.9 GHz
−
−
+9.0
+8.5
−
−
−
−
+11.0
+8.0
−
−
dBm
Adjacent Channel
Power
Padj f = 0.9 GHz
π/4 QPSK waveNote
PO = +4 dBm
∆f = ±50 kHz
∆f = ±100 kHz
−
−
−64
−64
−
−
−
−
−61
−62
−
−
dBc
3rd Order
Intermodulation
IM32 sine wave input.
Output of each tone
f1 = 0.900 GHz
f2 = 0.902 GHz
−−16 −−−27 −dBc
Distortion PO (each) = +4 dBm f1 = 1.900 GHz
f2 = 1.902 GHz
−−10 −−−14 −dBc
Note π/4 DQPSK modulated wave input, data rate 42 kbps, Filter roll off
α
= 0.5, PN 9
µ
µµ
µ
PC2771TB
Reference
Parameter Symbol Test Conditions
MIN. TYP. MAX.
Unit
Adjacent Channel
Power 1
Padj1 f = 0.9 GHz
π/4 QPSK waveNote
PO = +7 dBm
∆f = ±50 kHz
∆f = ±100 kHz
−
−
−61
−72
−
−
dBc
Adjacent Channel
Power 2
Padj2 f = 1.5 GHz
π/4 QPSK waveNote
PO = +7 dBm
∆f = ±50 kHz
∆f = ±100 kHz
−
−
−59
−71
−
−
dBc
3rd Order
Intermodulation
IM32 sine wave input.
Output of each tone
f1 = 0.900 GHz
f2 = 0.902 GHz
−−18 −dBc
Distortion PO (each) = +7 dBm f1 = 1.500 GHz
f2 = 1.502 GHz
−−12 −dBc
Note π/4 DQPSK modulated wave input, data rate 42 kbps, Filter roll off
α
= 0.5, PN 9
Data Sheet P12710EJ3V0DS
8
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
TEST CIRCUIT
V
CC
1 000 pF
1 000 pF 1 000 pF
C
1
C
2
L
4
6
1
2, 3, 5
50 Ω50 Ω
OUTIN
C
3
COMPONENTS OF TEST CIRCUIT EXAMPLE OF ACTUAL APPLICATION COMPONENTS
FOR MEASURING ELECTRICAL
CHARACTERISTICS
Type Value Type Value Operating Frequency
C1, C2Bias Tee 1 000 pF C1 to C3Chip capacitor 1 000 pF 100 MHz or higher
C3Capacitor 1 000 pF L Chip inductor 100 nH 100 MHz or higher
L Bias Tee 1 000 nH 10 nH 2.0 GHz or higher
INDUCTOR FOR THE OUTPUT PIN
The internal output transistor of this IC consumes 20 mA, to output medium power. To supply current for output
transistor, connect an inductor between the Vcc pin (pin 6) and output pin (pin 4). Select large value inductance, as
listed above.
The inductor has both DC and AC effects. In terms of DC, the inductor biases the output transistor with minimum
voltage drop to output enable high level. In terms of AC, the inductor make output-port-impedance higher to get
enough gain. In this case, large inductance and Q is suitable.
For above reason, select an inductance of 100 Ω or over impedance in the operating frequency. The gain is a
peak in the operating frequency band, and suppressed at lower frequencies.
The recommendable inductance can be chosen from example of actual application components list as shown
above.
CAPACITORS FOR THE VCC, INPUT, AND OUTPUT PINS
Capacitors of 1 000 pF are recommendable as the bypass capacitor for the Vcc pin and the coupling capacitors
for the input and output pins.
The bypass capacitor connected to the Vcc pin is used to minimize ground impedance of Vcc pin. So, stable bias
can be supplied against Vcc fluctuation.
The coupling capacitors, connected to the input and output pins, are used to cut the DC and minimize RF serial
impedance. Their capacitance are therefore selected as lower impedance against a 50 Ω load. The capacitors thus
perform as high pass filters, suppressing low frequencies to DC.
To obtain a flat gain from 100 MHz upwards, 1 000 pF capacitors are used in the test circuit. In the case of under
10 MHz operation, increase the value of coupling capacitor such as 10 000 pF. Because the coupling capacitors are
determined by equation, C = 1/(2πRfc).
Data Sheet P12710EJ3V0DS 9
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD
C1Z
321
456
→
Top View
IN OUT
C
V
CC
AMP-2
CC
L
Mounting direction
(Marking is an example for PC2762TB)
Notes
1.
2.
3.
4.
30 × 30 × 0.4 mm double sided copper clad polyimide board.
Back side: GND pattern
Solder plated on pattern
: Through holes
µ
For more information on the use of this IC, refer to the following application note: USAGE AND APPLICATIONS
OF 6-PIN SUPER MINI-MOLD SILICON MEDIUM-POWER HIGH-FREQUENCY AMPLIFIER MMIC (P13252E).
COMPONENT LIST
Value
C 1 000 pF
L Example: 10 nH
Data Sheet P12710EJ3V0DS
10
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°
°°
°C)
−
µ
PC2762TB −
CIRCUIT CURRENT vs. SUPPLY VOLTAGE
CIRCUIT CURRENT vs. OPERATING
AMBIENT TEMPERATURE
Circuit Current ICC (mA)
Supply Voltage VCC (V) Operating Ambient Temperature TA (°C)
Frequency f (GHz)
ISOLATION vs. FREQUENCY INPUT RETURN LOSS, OUTPUT RETURN
LOSS vs. FREQUENCY
Isolation ISL (dB)
Frequency f (GHz) Frequency f (GHz)
Frequency f (GHz)
0
–60
10
20
30
40
50
–40 –20 0 +20 +40 +60 +80 +100
No signal
VCC = 3.0 V
NOISE FIGURE, POWER GAIN
vs. FREQUENCY POWER GAIN vs. FREQUENCY
Circuit Current ICC (mA)Power Gain GP (dB)
No signal
0
10
20
30
40
50
1234
–40
–30
–20
0
–10
1.0 3.0
0.1 0.3
VCC = 3.0 V
Input Return Loss RLin (dB)
Output Return Loss RLout (dB)
–40
–30
–20
0
1.0 3.0
–10
0.30.1
RLin
RLout
VCC = 3.0 V
Noise Figure NF (dB)
Power Gain GP (dB)
1.0 3.00.30.1
4
6
12
16
20
8
10
14
18
2
GP
NF
VCC = 3.0 V
VCC = 3.3 V
VCC = 2.7 V
VCC = 3.3 V
VCC = 3.0 V
VCC = 2.7 V
4
6
8
10
280.1
10
12
14
16
18
TA = +85°C
TA = –40°C
TA = +25°C
1.0 3.00.3
VCC = 3.0 V
Data Sheet P12710EJ3V0DS 11
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
−
µ
PC2762TB −
OUTPUT POWER vs. INPUT POWER OUTPUT POWER vs. INPUT POWER
Output Power P
out
(dBm)Output Power P
out
(dBm)
Output Power P
out
(dBm)
Input Power P
in
(dBm) Input Power P
in
(dBm)
Input Power P
in
(dBm)
SATURATED OUTPUT POWER vs.
FREQUENCY
SATURATED OUTPUT POWER vs.
FREQUENCY
Saturated Output Power P
O (sat)
(dBm)
Saturated Output Power P
O (sat)
(dBm)
Frequency f (GHz)
Input Power P
in
(dBm)
–10
–20 –15 +5
–5
+15
0
+5
+10
–10 –5 0
–10
–20
–5
0
+5
+10
+15
–15 –10 –5 0 +5
OUTPUT POWER vs. INPUT POWER OUTPUT POWER vs. INPUT POWER
Output Power P
out
(dBm)
f = 0.9 GHz V
CC
= 3.0 V
V
CC
= 3.3 V
V
CC
= 2.7 V
–10
–20 –15 +5
–5
+15
T
A
= +85°C
T
A
= +25°C
T
A
= –40°C
0
+5
+10
–10 –5 0
f = 0.9 GHz
V
CC
= 3.0 V
f = 1.9 GHz
Frequency f (GHz)
–10
–20 –15 +5
–5
+15
0
+5
+10
–10 –5 0
f = 1.9 GHz
V
CC
= 3.0 V
+3
0.1
+9
+11
+13
+5
+7
1.0 3.0
V
CC
= 3.3 V
V
CC
= 3.0 V
V
CC
= 2.7 V
0.3 +3 0.3
+5
+7
+9
+13
1.0 3.0
+11
P
in
= +3 dBm P
in
= +3 dBm
V
CC
= 3.0 V
0.1
T
A
= +85°C
T
A
= +25°C
T
A
= –40°C
V
CC
= 3.0 V
V
CC
= 3.3 V
V
CC
= 2.7 V
T
A
= +85°C
T
A
= +25°C
T
A
= –40°C
Data Sheet P12710EJ3V0DS
12
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
−
µ
PC2762TB −
3RD ORDER INTERMODULATION DISTORTION
vs. OUTPUT POWER OF EACH TONE
3RD ORDER INTERMODULATION DISTORTION
vs. OUTPUT POWER OF EACH TONE
3rd Order Intermodulation Distortion IM
3
(dBc)
Output Power of Each Tone P
O (each)
(dBm) Output Power of Each Tone P
O (each)
(dBm)
0
–15
–10
–20
–30
–50
–60
–10 –5 0 +5 +10
3rd Order Intermodulation Distortion IM
3
(dBc)
V
CC
= 3.3 V
V
CC
= 3.0 V
V
CC
= 2.7 V
–40
0
–15
–10
–20
–30
–50
–60
–10 –5 0 +5 +10
–40 V
CC
= 3.0 V
V
CC
= 2.7 V
f
1
= 0.900 GHz
f
2
= 0.902 GHz f
1
= 1.900 GHz
f
2
= 1.902 GHz
V
CC
= 3.3 V
Remark The graphs indicate nominal characteristics.
Data Sheet P12710EJ3V0DS 13
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
S-PARAMETERS (TA = +25°
°°
°C, VCC = Vout = 3.0 V)
−
µ
PC2762TB −
S11-FREQUENCY
0.1 G 2.0 G
3.0 G
S22-FREQUENCY
0.1G
3.0 G
1.0 G
2.0 G
Data Sheet P12710EJ3V0DS
14
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
TYPICAL S-PARAMETER VALUES (TA = +25°
°°
°C)
µ
PC2762TB
VCC = Vout = 3.0 V, ICC = 29 mA
FREQUENCY S11 S21 S12 S22 K
MHz MAG. ANG. MAG. ANG. MAG. ANG. MAG. ANG.
100.0000 0.338 −1.3 4.560 −3.4 0.039 1.0 0.310 −5.5 2.23
200.0000 0.346 −2.0 4.581 −7.6 0.039 2.7 0.311 −9.5 2.20
300.0000 0.348 −1.2 4.616 −11.3 0.039 6.8 0.302 −12.3 2.20
400.0000 0.340 −1.9 4.661 −15.8 0.040 8.1 0.296 −16.2 2.18
500.0000 0.329 −3.1 4.689 −19.5 0.040 11.6 0.290 −20.2 2.20
600.0000 0.324 −6.2 4.726 −23.6 0.041 13.7 0.292 −24.1 2.12
700.0000 0.341 −8.1 4.844 −27.4 0.042 15.8 0.291 −26.2 2.01
800.0000 0.359 −7.6 4.927 −31.5 0.043 18.1 0.292 −28.3 1.90
900.0000 0.378 −6.5 5.057 −35.8 0.044 19.3 0.284 −30.9 1.77
1000.0000 0.375 −5.1 5.179 −41.0 0.045 20.3 0.280 −35.3 1.72
1100.0000 0.363 −5.2 5.306 −45.9 0.047 22.1 0.285 −40.0 1.64
1200.0000 0.353 −6.7 5.400 −51.0 0.047 23.7 0.288 −43.4 1.62
1300.0000 0.357 −8.8 5.567 −56.5 0.048 26.1 0.288 −45.7 1.54
1400.0000 0.377 −11.7 5.706 −61.7 0.049 24.5 0.285 −47.9 1.44
1500.0000 0.402 −12.7 5.820 −68.0 0.052 26.7 0.282 −52.8 1.32
1600.0000 0.414 −13.2 5.987 −73.7 0.052 26.8 0.285 −58.1 1.27
1700.0000 0.426 −13.6 6.081 −80.1 0.055 29.0 0.288 −62.0 1.18
1800.0000 0.434 −16.1 6.182 −86.7 0.056 28.2 0.291 −66.1 1.14
1900.0000 0.448 −19.0 6.229 −93.2 0.057 28.5 0.286 −70.4 1.09
2000.0000 0.463 −21.7 6.328 −99.7 0.057 28.0 0.282 −76.2 1.07
2100.0000 0.483 −23.9 6.382 −106.7 0.058 28.5 0.282 −81.5 1.01
2200.0000 0.492 −25.8 6.431 −113.8 0.058 29.0 0.282 −86.9 0.99
2300.0000 0.492 −29.7 6.424 −121.2 0.060 30.1 0.278 −91.7 0.99
2400.0000 0.486 −34.6 6.329 −128.8 0.060 30.2 0.268 −98.4 1.01
2500.0000 0.489 −40.4 6.146 −136.1 0.062 31.1 0.260 −104.5 1.02
2600.0000 0.500 −44.6 5.997 −143.1 0.061 32.1 0.251 −111.3 1.05
2700.0000 0.511 −48.5 5.822 −149.9 0.064 31.4 0.248 −116.7 1.03
2800.0000 0.511 −50.4 5.693 −157.0 0.066 34.0 0.237 −121.5 1.04
2900.0000 0.494 −52.9 5.553 −163.0 0.065 33.8 0.222 −128.3 1.11
3000.0000 0.465 −55.9 5.334 −169.5 0.065 35.5 0.203 −134.5 1.20
3100.0000 0.441 −60.6 5.157 −175.5 0.066 35.5 0.189 −141.1 1.27
Data Sheet P12710EJ3V0DS 15
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°
°°
°C)
−
µ
PC2763TB −
CIRCUIT CURRENT vs. SUPPLY VOLTAGE
CIRCUIT CURRENT vs. OPERATING
AMBIENT TEMPERATURE
Circuit Current I
CC
(mA)
Supply Voltage V
CC
(V) Operating Ambient Temperature T
A
(°C)
Frequency f (GHz)
ISOLATION vs. FREQUENCY
Isolation ISL (dB)
Frequency f (GHz)
Frequency f (GHz)
NOISE FIGURE, POWER GAIN
vs. FREQUENCY POWER GAIN vs. FREQUENCY
Circuit Current I
CC
(mA)
Power Gain G
P
(dB)
Frequency f (GHz)
INPUT RETURN LOSS, OUTPUT RETURN
LOSS vs. FREQUENCY
0
10
20
30
40
1234
10
–60
30
50
–40 –20 0
5
–50
0.1
–30
–20
–10
0
–40
–40
0.1
–30
–20
–10
0
0.3 1.0 3.0
RL
in
3
7
50
0
20
40
Noise Figure NF (dB)
Power Gain G
P
(dB)
Input Return Loss RL
in
(dB)
Output Return Loss RL
out
(dB)
0.3 1.0 3.0
RLo
60.1
14
16
22
24
8
10
12
18
20
0.3 1.0 3.0
VCC = 3.3
NF
G
P
TA = –40 °C
TA = +85 °C
VCC = 2.7
VCC = 3.0
VCC = 3.3
60.1
14
16
22
24
8
10
12
18
20
0.3 1.0 3.0
VCC = 2.7
VCC = 3.0
TA = +85 °C
TA = +25 °CTA = –40 °C
TA = +25 °C
V
CC
= 3.0 V
0
10
20
30
40
1234
10
–60
30
50
–40 –20 +20 +40 +100
0 +80+60
5
–50
0.1
–30
–20
–10
0
–40
–40
0.1
–30
–20
–10
0
0.3 1.0 3.0
3
7
50
No signal No signal
V
CC
= 3.0 V
0
20
40
0.3 1.0 3.0
RL
out
V
CC
= 3.0 V
6
4
60.1
14
16
22
24
8
10
12
18
20
0.3 1.0 3.0
V
CC
= 3.3 V
NF
T
A
= –40°C
T
A
= +85°C
V
CC
= 3.0 V
V
CC
= 2.7 V
V
CC
= 3.0 V
V
CC
= 3.3 V
60.1
14
16
22
24
8
10
12
18
20
0.3 1.0 3.0
V
CC
= 2.7 V
V
CC
= 3.0 V
T
A
= +85°C
T
A
= +25°CT
A
= –40°C
T
A
= +25°C
Data Sheet P12710EJ3V0DS
16
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
−
µ
PC2763TB −
OUTPUT POWER vs. INPUT POWER OUTPUT POWER vs. INPUT POWER
Output Power P
out
(dBm)Output Power P
out
(dBm)
Input Power P
in
(dBm) Input Power P
in
(dBm)
Input Power P
in
(dBm)
SATURATED OUTPUT POWER vs.
FREQUENCY
SATURATED OUTPUT POWER vs.
FREQUENCY
Saturated Output Power P
O (sat)
(dBm)
Frequency f (GHz)
Input Power P
in
(dBm)
OUTPUT POWER vs. INPUT POWER OUTPUT POWER vs. INPUT POWER
Output Power P
out
(dBm)
Output Power P
out
(dBm)
Saturated Output Power P
O (sat)
(dBm)
Frequency f (GHz)
–5
+3
0.1
0
+5
+10
+15
–5
0
+5
+10
+15
+9
+11
+13
+15
–10
–25
0
+5
+10
+15
+5
+10
+15
–20 –15 –10 –50
–5
T
A
= +85°C
T
A
= +25°C
T
A
= –40°C
T
A
= +85°C
T
A
= –40°C
V
CC
= 3.3 V
V
CC
= 3.0 V
V
CC
= 2.7 V
+5
+7
1.0 3.0
T
A
= +25°C
T
A
= +85°C
T
A
= –40°C
T
A
= –40°C
T
A
= +85°C
T
A
= +25°C
+3
0.1
+5
+9
+11
+13
+15
1.0 3.0
+7
–25 –20 –15 –10 –50
f = 0.9 GHz
V
CC
= 3.0 V
f = 0.9 GHz
f = 1.9 GHz f = 1.9 GHz
V
CC
= 3.0 V
–25 –20 –15 –10 –50
–10
–25 –20 –15 –10 –50
0.3 0.3
P
in
= –3 dBm Pin = –3 dBm
V
CC
= 3.0 V
V
CC
= 3.3 V
V
CC
= 3.0 V
V
CC
= 2.7 V
–10
0
–5
–10
V
CC
= 3.3 V
V
CC
= 3.0 V
V
CC
= 2.7 V
T
A
= –40°C
T
A
= +25°C
T
A
= +85°C
Data Sheet P12710EJ3V0DS 17
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
−
µ
PC2763TB −
3rd Order Intermodulation Distortion IM3 (dBc)
Output Power of Each Tone PO (each) (dBm) Output Power of Each Tone PO (each) (dBm)
3rd Order Intermodulation Distortion IM3 (dBc)
3RD ORDER INTERMODULATION DISTORTION
vs. OUTPUT POWER OF EACH TONE
3RD ORDER INTERMODULATION DISTORTION
vs. OUTPUT POWER OF EACH TONE
0
–15
–10
–20
–50
–60
–10 –5 0 +5 +10
VCC = 3.3 V
VCC = 2.7 V
0
–20
–30
–50
–60
–10
–30
–40 VCC = 3.0 V VCC = 3.3 V
VCC = 2.7 V
VCC = 3.0 V
–40
–15 –10 –5 0 +5 +10
f1 = 0.900 GHz
f2 = 0.902 GHz f1 = 1.900 GHz
f2 = 1.902 GHz
Remark The graphs indicate nominal characteristics.
Data Sheet P12710EJ3V0DS
18
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
S-PARAMETERS (TA = +25°
°°
°C, VCC = Vout = 3.0 V)
−
µ
PC2763TB −
S11-FREQUENCY
0.1 G
2.0 G
1.0 G
3.0 G
S22-FREQUENCY
1.0 G
2.0 G
3.0 G
0.1 G
Data Sheet P12710EJ3V0DS 19
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
TYPICAL S-PARAMETER VALUES (TA = +25°
°°
°C)
µ
PC2763TB
VCC = Vout = 3.0 V, ICC = 28 mA
FREQUENCY S11 S21 S12 S22 K
MHz MAG. ANG. MAG. ANG. MAG. ANG. MAG. ANG.
100.0000 0.231 −1.4 10.210 −3.8 0.023 2.4 0.406 −4.1 1.68
200.0000 0.242 −0.2 10.305 −8.5 0.023 7.8 0.412 −7.5 1.66
300.0000 0.250 2.7 10.464 −12.9 0.024 9.3 0.407 −9.9 1.58
400.0000 0.245 2.8 10.655 −18.2 0.024 13.4 0.407 −13.9 1.55
500.0000 0.242 2.0 10.863 −22.8 0.026 16.1 0.405 −17.6 1.44
600.0000 0.241 −2.2 11.093 −28.1 0.027 19.9 0.414 −21.6 1.37
700.0000 0.263 −5.3 11.544 −33.2 0.028 22.3 0.419 −24.6 1.25
800.0000 0.291 −5.6 11.843 −39.0 0.029 22.5 0.424 −27.7 1.16
900.0000 0.316 −5.1 12.291 −45.1 0.029 23.9 0.424 −31.9 1.09
1000.0000 0.322 −4.0 12.676 −52.4 0.030 25.6 0.425 −37.1 1.02
1100.0000 0.318 −5.4 13.066 −59.8 0.031 24.1 0.438 −42.5 0.96
1200.0000 0.309 −9.0 13.311 −67.3 0.031 27.0 0.442 −47.8 0.96
1300.0000 0.322 −14.2 13.661 −75.8 0.033 28.8 0.441 −51.2 0.90
1400.0000 0.344 −20.6 13.845 −83.9 0.033 28.5 0.434 −56.0 0.87
1500.0000 0.371 −23.7 13.824 −93.0 0.035 30.1 0.435 −62.2 0.82
1600.0000 0.380 −27.5 13.890 −101.5 0.035 28.1 0.439 −68.9 0.80
1700.0000 0.388 −30.6 13.634 −110.5 0.036 29.2 0.439 −74.6 0.78
1800.0000 0.378 −36.4 13.236 −119.6 0.035 29.9 0.428 −81.3 0.84
1900.0000 0.378 −42.1 12.724 −127.9 0.035 30.9 0.411 −87.0 0.89
2000.0000 0.375 −46.6 12.290 −136.1 0.035 32.9 0.393 −93.4 0.94
2100.0000 0.369 −50.5 11.707 −144.0 0.035 33.0 0.385 −99.6 0.99
2200.0000 0.351 −53.8 11.130 −151.7 0.036 35.7 0.373 −104.9 1.06
2300.0000 0.331 −59.8 10.524 −159.1 0.036 36.8 0.359 −110.3 1.13
2400.0000 0.306 −66.4 9.824 −165.9 0.034 38.7 0.336 −117.5 1.31
2500.0000 0.300 −73.1 9.152 −172.3 0.035 40.1 0.321 −123.3 1.41
2600.0000 0.294 −75.8 8.583 −178.2 0.034 43.8 0.306 −129.4 1.55
2700.0000 0.290 −77.1 8.029 176.2 0.035 46.3 0.299 −133.9 1.58
2800.0000 0.270 −77.7 7.610 170.6 0.037 47.7 0.288 −138.6 1.63
2900.0000 0.248 −78.7 7.240 166.1 0.039 51.1 0.270 −143.6 1.67
3000.0000 0.219 −82.3 6.827 161.2 0.039 53.6 0.253 −150.1 1.79
3100.0000 0.198 −88.7 6.516 156.9 0.040 55.1 0.244 −156.2 1.88
Data Sheet P12710EJ3V0DS
20
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°
°°
°C)
−
µ
PC2771TB −
CIRCUIT CURRENT vs. OPERATING
AMBIENT TEMPERATURE
Circuit Current ICC (mA)
Supply Voltage VCC (V) Operating Ambient Temperature TA (°C)
Frequency f (GHz)
ISOLATION vs. FREQUENCY
Isolation ISL (dB)
Frequency f (GHz)
Frequency f (GHz)
NOISE FIGURE, POWER GAIN
vs. FREQUENCY POWER GAIN vs. FREQUENCY
Circuit Current ICC (mA)
Power Gain GP (dB)
Frequency f (GHz)
INPUT RETURN LOSS, OUTPUT RETURN
LOSS vs. FREQUENCY
CIRCUIT CURRENT vs. SUPPLY VOLTAGE
14
0.1
24
0.1
22
20
18
16
0.3 1.0 3.0
22
24
0.3 1.0 3.0
Power Gain GP (dB)
50
50
20
0123
40
30
20
10
0 +100
18
0.1
0
0.1 0.3 1.0 3.0
–10
–20
–30
–40 1.0 3.0
4
10
30
40
0
–60 –40 –20 +20 +40 +60 +80
14
No signal No signal
VCC = 3.0 V
VCC = 2.7 V
VCC = 3.0 V
VCC = 3.3 V
VCC = 2.7 V
VCC = 3.0 V
VCC = 3.3 V
20
16
TA = –40°C
TA = +25°C
TA = +85°C
0.3
Input Return Loss RLin (dB)
Outpur Return Loss RLout (dB)
RLout
RLin
VCC = 3.0 V
VCC = 2.7 V
VCC = 3.3 V
12
10
8
6
5
6
7
4
3
Noise Figure NF (dB)
GP
NF
VCC = 3.0 V
0
–10
–20
–30
–40
VCC = 3.0 V VCC = 3.0 V
Data Sheet P12710EJ3V0DS 21
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
−
µ
PC2771TB −
OUTPUT POWER vs. INPUT POWER
Output Power P
out
(dBm)Output Power P
out
(dBm)
Input Power P
in
(dBm) Input Power P
in
(dBm)
Input Power P
in
(dBm)
OUTPUT POWER vs. INPUT POWER
Output Power P
out
(dBm)
Input Power P
in
(dBm)
Input Power P
in
(dBm)
OUTPUT POWER vs. INPUT POWER OUTPUT POWER vs. INPUT POWER
Output Power P
out
(dBm)
Output Power P
out
(dBm)
Output Power P
out
(dBm)
Input Power P
in
(dBm)
OUTPUT POWER vs. INPUT POWER
OUTPUT POWER vs. INPUT POWER
0
–5
–10
+15
0
–20 –15 –10
0
–5
+15
0
0
–5
+5
+10
+15
+5
+10
+15
+5
+10
+15
+5
+10
V
CC
= 3.3 V
+10
+5
–5
–10
–25 –5
f = 0.9 GHz
V
CC
= 3.0 V
V
CC
= 2.7 V
–20 –15 –10 0–25 –5
f = 0.9 GHz
V
CC
= 3.0 V
T
A
= +85°C
T
A
= +25°C
T
A
= –40°C
–20 –15 –10 0
–25 –5
f = 1.5 GHz
0
–5–20 –15 –10 0–25 –5
f = 1.5 GHz
V
CC
= 3.0 V
T
A
= +85°C
T
A
= –40°C
T
A
= +25°C
T
A
= +85°C
T
A
= –40°C
T
A
= +25°C
T
A
= –40°C
T
A
= +85°C
T
A
= +25°C
f = 1.9 GHz f = 1.9 GHz
V
CC
= 3.0 V
–20 –15 –10 0
–25 –5
V
CC
= 2.7 V
V
CC
= 3.0 V
V
CC
= 3.3 V
+15
+10
–5
–10 –20 –15 –10 0–25 –5
+5
0
T
A
= –40˚C
T
A
= +85˚C
T
A
= +25˚C
V
CC
= 2.7 V
V
CC
= 3.0 V
V
CC
= 3.3 V
Data Sheet P12710EJ3V0DS
22
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
−
µ
PC2771TB −
Saturated Output Power P
O (sat)
(dBm)3rd Order Intermodulation Distortion IM
3
(dBc)
Frequency f (GHz) Frequency f (GHz)
Output Power of Each Tone P
O (each)
(dBm) Output Power of Each Tone P
O (each)
(dBm)
3RD ORDER INTERMODULATION DISTORTION
vs. OUTPUT POWER OF EACH TONE
3RD ORDER INTERMODULATION DISTORTION
vs. OUTPUT POWER OF EACH TONE
Saturated Output Power P
O (sat)
(dBm)
3rd Order Intermodulation Distortion IM
3
(dBc)
SATURATED OUTPUT POWER vs.
FREQUENCY
SATURATED OUTPUT POWER vs.
FREQUENCY
+17
+9
1.0
–60
–30
–5 +10
+7
+13
+15
–50
–40
–20
–10
+11
+50.1
V
CC
= 3.0 V
V
CC
= 2.7 V
P
in
= –3 dBm
+17
+9
+7
+13
+15
+11
+5
P
in
= –3 dBm
V
CC
= 3.0 V
T
A
= +85°C
T
A
= +25°C
T
A
= –40°C
0
0–10
–60
–30
–15 +10
–50
–40
–20
–10
0–50–10
f
1
= 0.900 GHz
f
2
= 0.902 GHz
f
1
= 1.500 GHz
f
2
= 1.502 GHz
V
CC
= 3.3 V
V
CC
= 3.0 V
V
CC
= 2.7 V
+5
–15 +5
0.3 3.0 1.00.1 0.3 3.0
V
CC
= 3.3 V
V
CC
= 3.0 V
V
CC
= 2.7 V
V
CC
= 3.3 V
Remark The graphs indicate nominal characteristics.
Data Sheet P12710EJ3V0DS 23
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
S-PARAMETERS (TA = +25°
°°
°C, VCC = Vout = 3.0 V)
−
µ
PC2771TB −
S11-FREQUENCY
0.1 G
3.0 G
2.0 G
S22-FREQUENCY
0.1G
2.0 G
3.0 G
Data Sheet P12710EJ3V0DS
24
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
TYPICAL S-PARAMETER VALUES (TA = +25°
°°
°C)
µ
PC2771TB
VCC = Vout = 3.0 V, ICC = 35 mA
FREQUENCY S11 S21 S12 S22 K
MHz MAG. ANG. MAG. ANG. MAG. ANG. MAG. ANG.
100.0000 0.045 19.7 10.570 −4.7 0.028 0.8 0.327 −6.2 1.65
200.0000 0.057 37.0 10.638 −9.5 0.028 5.0 0.325 −11.5 1.63
300.0000 0.075 41.3 10.775 −14.1 0.029 8.6 0.323 −16.2 1.58
400.0000 0.090 43.3 11.004 −19.4 0.030 11.1 0.326 −20.9 1.49
500.0000 0.105 42.2 11.275 −24.4 0.030 14.9 0.331 −26.4 1.45
600.0000 0.118 40.2 11.586 −30.0 0.031 15.8 0.342 −32.0 1.37
700.0000 0.138 34.9 12.041 −35.9 0.031 19.8 0.350 −37.3 1.29
800.0000 0.163 32.5 12.367 −42.1 0.032 20.1 0.359 −42.8 1.20
900.0000 0.186 29.4 12.844 −48.8 0.032 23.2 0.361 −49.4 1.15
1000.0000 0.202 26.3 13.300 −56.6 0.032 23.9 0.371 −56.1 1.11
1100.0000 0.219 21.7 13.771 −64.6 0.033 24.9 0.389 −62.5 1.03
1200.0000 0.233 15.4 14.082 −73.5 0.033 26.6 0.400 −69.3 0.99
1300.0000 0.252 8.4 14.365 −83.2 0.036 28.8 0.405 −75.4 0.92
1400.0000 0.267 −0.1 14.336 −92.6 0.036 30.0 0.402 −83.6 0.91
1500.0000 0.285 −6.8 14.142 −102.4 0.036 32.0 0.406 −91.6 0.90
1600.0000 0.293 −13.9 13.929 −112.0 0.037 31.6 0.413 −99.3 0.89
1700.0000 0.304 −20.9 13.428 −121.6 0.039 32.5 0.414 −105.8 0.88
1800.0000 0.290 −28.1 12.722 −131.0 0.038 34.7 0.401 −113.7 0.96
1900.0000 0.285 −35.3 11.966 −139.6 0.038 36.1 0.387 −120.8 1.03
2000.0000 0.273 −41.8 11.232 −147.5 0.038 37.4 0.378 −127.6 1.09
2100.0000 0.267 −47.4 10.500 −154.8 0.039 39.1 0.366 −133.1 1.14
2200.0000 0.254 −51.6 9.815 −161.7 0.040 41.4 0.356 −138.0 1.20
2300.0000 0.237 −57.1 9.168 −168.0 0.041 43.7 0.342 −142.8 1.28
2400.0000 0.221 −61.1 8.570 −173.7 0.041 48.3 0.325 −148.3 1.37
2500.0000 0.212 −68.8 7.967 −179.7 0.042 48.3 0.322 −152.6 1.44
2600.0000 0.208 −72.2 7.507 174.9 0.043 50.8 0.314 −156.7 1.49
2700.0000 0.202 −74.1 7.004 170.0 0.045 53.7 0.309 −160.1 1.53
2800.0000 0.190 −76.3 6.667 164.7 0.047 54.2 0.303 −164.0 1.56
2900.0000 0.178 −76.7 6.336 160.7 0.051 57.7 0.292 −167.8 1.55
3000.0000 0.154 −82.3 6.003 155.6 0.051 56.5 0.287 −172.8 1.62
3100.0000 0.147 −88.0 5.772 151.3 0.054 59.3 0.279 −176.4 1.61
Data Sheet P12710EJ3V0DS 25
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
PACKAGE DIMENSIONS
6-PIN SUPER MINIMOLD (UNIT: mm)
0.9±0.1
0.7
0 to 0.1
0.15
+0.1
–0.05
2.0±0.2
1.3
0.650.65
0.2
+0.1
–0.05
2.1±0.1
1.25±0.1
0.1 MIN.
Data Sheet P12710EJ3V0DS
26
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
NOTES ON CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as wide as possible to minimize ground impedance (to prevent undesired oscillation).
All the ground pins must be connected together with wide ground pattern to decrease impedance difference.
(3) The bypass capacitor should be attached to the VCC pin.
(4) The inductor must be attached between VCC and output pins. The inductance value should be determined in
accordance with desired frequency.
(5) The DC cut capacitor must be attached to input pin.
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered under the following recommended conditions. For soldering methods and
conditions other than those recommended below, contact your NEC sales representative.
Soldering Method Soldering Conditions Recommended Condition Symbol
Infrared Reflow Package peak temperature: 235°C or below
Time: 30 seconds or less (at 210°C)
Count: 3, Exposure limit: NoneNote
IR35-00-3
VPS Package peak temperature: 215°C or below
Time: 40 seconds or less (at 200°C)
Count: 3, Exposure limit: NoneNote
VP15-00-3
Wave Soldering Soldering bath temperature: 260°C or below
Time: 10 seconds or less
Count: 1, Exposure limit: NoneNote
WS60-00-1
Partial Heating Pin temperature: 300°C or below
Time: 3 seconds or less (per side of device)
Exposure limit: NoneNote
–
Note After opening the dry pack, keep it in a place below 25°C and 65% RH for the allowable storage period.
Caution Do not use different soldering methods together (except for partial heating).
For details of recommended soldering conditions for surface mounting, refer to information document
SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E).
Data Sheet P12710EJ3V0DS 27
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
[MEMO]
µ
µµ
µ
PC2762TB,
µ
µµ
µ
PC2763TB,
µ
µµ
µ
PC2771TB
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
NESAT (NEC Silicon Advanced Technology) is a trademark of NEC Corporation.
M8E 00. 4
The information in this document is current as of February, 2001. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or
data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all
products and/or types are available in every country. Please check with an NEC sales representative
for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
•
•
•
•
•
•
