!Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Cat.No.P50E-5 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. EU RoHS Compliant * * * All the products in this catalog comply with EU RoHS. EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. CONTENTS P50E.pdf May.23,2011 1 CERAFILr and "CERAFIL" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. 2 Part Numbering 2 1. CERAFILr 3 1-1 CERAFILr 10.7MHz 1 Small Chip Type SFECF Series 5 2 Chip Type SFECV/SFECK Series 11 3 Standard Lead Type SFELF Series 14 4 Low Loss Type SFELF Series 17 5 Low Profile Type SFELG Series 20 6 Low Spurious Response Type SFELF Series 23 7 Wide Bandwidth Type SFELF Series 26 8 Narrow Bandwidth Type SFVLF/SFKLF/SFELF Series 28 9 For FM-IF Tuners SFELF Series 31 Related Data on Lead Type 34 1-2 CERAFILr 2.3-6.5MHz 4 5 6 7 8 9 10 4.5-6.5MHz Chip Type SFSKA Series 35 11 2.3-5.7MHz Chip Type SFSKB Series 38 10 12 Chip Type SFPKA Series 42 11 13 Lead Type SFPLA/CFWLA Series 44 14 For AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series 46 SFp Series Temperature Characteristics 48 1-3 CERAFILr 455kHz 2. Ceramic Trap 15 Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series 12 13 49 3. Ceramic Discriminator 14 16 10.7MHz Ultra Thin Chip Type CDSCB Series 51 17 10.7MHz Standard Lead Type CDALF Series 56 Applied IC Reference Table 60 Notice 61 Packaging 78 Part Number Index 85 15 16 17 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. o Part Numbering CERAFILr for FM (Part Number) SF E LF q w e A A0 -B0 t y u i 10M7 F r yCenter Frequency/Tolerance qProduct ID Product ID SF Ceramic Filters wOscillation/Number of Elements Code Center Frequency Tolerance A Center Frequency mentioned by specification 30kHz B -30kHz shifted from center frequency of code "A" 30kHz C +30kHz shifted from center frequency of code "A" 30kHz Code Oscillation/Number of Elements D -60kHz shifted from center frequency of code "A" 30kHz E 2 Elements Thickness Expander mode E +60kHz shifted from center frequency of code "A" 30kHz T 3 Elements Thickness Expander mode H V 2 Elements Thickness Expander mode (2nd Harmonic) V -50kHz shifted from center frequency of code "H" 25kHz W +50kHz shifted from center frequency of code "H" 25kHz K 2 Elements Thickness Expander mode (3rd Over Tone) eStructure/Size Code Structure/Size Lp Lead Type Cp Chip Type p is expressed "A" or subsequent code, which indicates the structure/size. Center Frequency mentioned by specification 25kHz K Center Frequency mentioned by specification 20kHz Z Combination of A, B, C, D, E -- M Combination of A, B, C -- F Nominal Center Frequency -- 3dB bandwidth of "F" signifies the frequency difference (both + and -) from reference frequency which is nominal center frequency. uSeries Code Series A0 Two-digit alphanumerics express series rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M" in case of MHz. t3dB Bandwidth 2 iPackaging Code Packaging -B0 Bulk -R0 Embossed Taping o180mm Embossed Taping o330mm Code 3dB Bandwidth -R1 C 450kHz min -A0 1500pcs. /Radial Taping H0=18mm D 350kHz min -A1 1000pcs. /Radial Taping H0=18mm E 330kHz F 280kHz G 230kHz H 180kHz J 150kHz K 110kHz L 80kHz M 50kHz N 35kHz Radial taping is applied to lead type and embossed taping to chip type. With non-standard products, two-digit alphanumerics indicating "Individual Specification" are added between "uSeries" and "iPackaging". P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 CERAFILr (Part Number) SF S KA 4M50 CF 00 -R1 q w e r t y u qProduct ID tProduct Specification Code (1) Product ID Product Specification Code (1) Code SF Ceramic Filters wOscillation/Numbers of Element Code Oscillation/Numbers of Element S 2 Elements Thickness Shear mode BF Tight Bandwidth Type CF Standard Bandwidth Type DF Broad Bandwidth Type EF Ultra-broad Bandwidth Type yProduct Specification Code (2) eStructure/Size Code Structure/Size Kp Chip Type p is expressed "A" or subsequent code, which indicates the structure/size. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M" in case of MHz. Code Product Specification Code (2) 00 Standard Type uPackaging Packaging Code -B0 Bulk -R1 Embossed Taping o=330mm With non-standard products, two-digit alphanumerics indicating "Individual Specification" is added between "yProduct Specification Code (2)" and "uPackaging". CERAFILr for AM (Part Number) SF P KA 455K D4A -B0 q w e r t y tProduct Specification qProduct ID Product ID SF Ceramic Filters CF Ceramic Filters Code Product Specification D4A Three-digit alphanumerics indicate product specification of 3dB or 6dB frequency tolerance. ppA indicates standard type. wOscillation/Numbers of Element Code Oscillation/Numbers of Element P 4 Elements Area Expansion mode eStructure/Size yPackaging Code Packaging -B0 Bulk -R0 Embossed Taping (o180mm) Code Structure/Size -R1 Embossed Taping (o330mm) Lp Lead Type -M0 Magazine Cassette Cp/Kp Chip Type p is "A" or subsequent code, which indicates the structure/size. It varies depending on vibration mode and number of elements. Radial taping is applied to lead type and embossed taping to chip type. With non-standard products, three-digit alphanumerics indicating "Individual Specification" is added between "tProduct Specification" and "yPackaging". rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Capital letter "K" following three figures expresses the unit of "kHz". 3 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Ceramic Traps (Part Number) TP S KA 4M00 q w e r B 00 -R0 t y u qProduct ID tProduct Specification Code (1) Product ID TP Code Product Specification (1) B Broad-bandwidth Type C Low-capacitance Type Ceramic Traps wFunction yProduct Specification Code (2) Code Function S Single Traps Code Product Specification (2) 00 Standard Type eStructure/Size Code Structure/Size Kp Chip Type uPackaging Code Packaging -B0 Bulk -R1 Embossed Taping o=330mm p is expressed "A" or subsequent code, which indicates the structure/size. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M" in case of MHz. With non-standard products, three-digit alphanumerics indicating "Individual Specification" is added between "yProduct Specification Code (2)" and "uPackaging". Discriminators for FM (Part Number) CD A LF 10M7 q w e r G A 001 -B0 t y u i yCenter Frequency/Tolerance qProduct ID Product ID CD Discriminators wOscillation Code Center Frequency Tolerance A Center Frequency mentioned by specification 30kHz B -30kHz shifted from center frequency of code "A" 30kHz C +30kHz shifted from center frequency of code "A" 30kHz Code Oscillation D -60kHz shifted from center frequency of code "A" 30kHz A Thickness Expander mode E +60kHz shifted from center frequency of code "A" 30kHz S Thickness Shear mode H eStructure/Size Center Frequency mentioned by specification 25kHz V -50kHz shifted from center frequency of code "H" 25kHz W +50kHz shifted from center frequency of code "H" 25kHz K Center Frequency mentioned by specification 20kHz Lead Type Z Combination of A, B, C, D, E -- Chip Type M Combination of A, B, C -- F Nominal Center Frequency -- Code Structure/Size Lp Cp p is expressed "A" or subsequent code, which indicates the structure/size. 3dB bandwidth of "F" signifies the frequency difference (both + and -) from reference frequency which is nominal center frequency. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M" in case of MHz. uIC Code IC 001 Applicable IC Control Code tSeries Code Series G Two-digit alphanumerics express series iPackaging Code Packaging -B0 Bulk -A0 Radial Taping H0=18mm -R0 Embossed Taping o=180mm -R1 Embossed Taping o=330mm Radial taping is applied to lead type and embossed taping to chip type. With non-standard products, an alphanumerics indicating "Individual Specification" is added between "uIC" and "iPackaging". 4 P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment 1 Small Chip Type SFECF Series 1.30.1 SFECF10M7 series for FM receivers are small, high performance and super thin (1.4mm max.) filters. The piezoelectric element is sandwiched by the ceramics substrate. They have 1.4mm max. thickness and a small mounting area. (3.45x3.1mm) SFECF series and CDSCB series (MHz Discriminator) enable customers to make VICS/RKE/TPMS set very thin and small. 3.10.2 3.450.2 Input electrode marker 0 to 0.4 (0.6) (0.6) (0.6) 0 to 0.4 (1.28)(1.28) 0.3 min. 0.3 min. (1) (6) (2) (3) (5) (4) (1.28)(1.28) 0 to 0.35 Features 0.750.3 0.850.3 0.850.3 0.650.3 0.70.3 0.650.3 (1) : (2)(5) : (3)(4) : (6) : : ( ): Input Ground No connect Output EIAJ Monthly Code Reference (in mm) 0 to 0.35 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.4mm max. thickness, and have a small mounting area (3.45x3.1mm) enabling flexible PCB design. 3. Various bandwidths are available. Select a suitable type in accordance with the desired selectivity. 4. Operating Temperature Range: -20 to +80 (degrees C)(Standard Type) -40 to +85 (degrees C)(High-reliability Type) Storage Temperature Range: -40 to +85 (degrees C)(Standard Type) -55 to +85 (degrees C)(High-reliability Type) Standard Type Part Number Center Nominal Center 3dB Attenuation Insertion Loss Frequency Frequency (fn) Bandwidth (kHz) (dB) (fo) (MHz) (MHz) (kHz) Ripple (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFECF10M7HA00-R0 10.700 30kHz - 180 40kHz 470 max. 4.0 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7HF00-R0 - 10.700 fn25 min. 510 max. 8.0 max. [at fn] 1.0 max. 30 min. 25 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7GA00-R0 10.700 30kHz - 230 50kHz 510 max. 3.5 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7GF00-R0 - 10.700 fn45 min. 560 max. 8.0 max. [at fn] 1.0 max. 30 min. 25 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7FA00-R0 10.700 30kHz - 280 50kHz 590 max. 3.0 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7FF00-R0 - 10.700 fn65 min. 620 max. 7.0 max. [at fn] 1.0 max. 30 min. 25 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7EA00-R0 10.700 30kHz - 330 50kHz 700 max. 3.0 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7DA0001-R0 10.700 30kHz - 420 min. 950 max. 3.0 2.0dB 3.0 max. 35 min. 25 min. [within 9MHz to fo] [within fo to 12MHz] 330 - 10.700 fn150 min. 990 max. 6.0 max. [at fn] 3.0 max. 20 min. 20 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7DF00-R0 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W. Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 5 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. 1 May.23,2011 High-reliability Type Center Nominal Center 3dB Attenuation Insertion Loss Frequency Frequency (fn) Bandwidth (kHz) (dB) (fo) (MHz) (MHz) (kHz) Part Number Spurious Attenuation (1) (dB) Ripple (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFECF10M7HA00S0-R0 10.700 30kHz - 180 40kHz 470 max. 4.0 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7HF00S0-R0 - 10.700 fn25 min. 510 max. 8.0 max. [at fn] 1.0 max. 30 min. 25 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7GA00S0-R0 10.700 30kHz - 230 50kHz 510 max. 3.5 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7GF00S0-R0 - 10.700 fn45 min. 560 max. 8.0 max. [at fn] 1.0 max. 30 min. 25 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7FA00S0-R0 10.700 30kHz - 280 50kHz 590 max. 3.0 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7FF00S0-R0 - 10.700 fn65 min. 630 max. 7.0 max. [at fn] 1.0 max. 30 min. 25 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7EA00S0-R0 10.700 30kHz - 330 50kHz 700 max. 3.0 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7DF00S0-R0 - 10.700 fn145 min. 990 max. 6.0 max. [at fn] 3.0 max. 20 min. 20 min. [within 9MHz to fn] [within fn to 12MHz] 330 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W. Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step D 10.64MHz30kHz 10.650MHz25kHz B 10.67MHz30kHz 10.675MHz25kHz A 10.70MHz30kHz 10.700MHz25kHz C 10.73MHz30kHz 10.725MHz25kHz E 10.76MHz30kHz 10.750MHz25kHz Z Combination A, B, C, D, E M Combination A, B, C Test Circuit (5) (4) 1.05 (6) 0.1 0.3 0.1 Standard Land Pattern Dimensions (3) (4) (2) (5) 1.40 0.3 R1 (1) 0.1 0.3 (3) 1.05 (2) 0.1 E1 (1) (6) Rg R2 C2 E2 RF Voltmeter S.S.G. 0.1 0.1 0.8 0.6 0.8 0.6 It shows solder resist land pattern. 0.8 (1) : Input (2)(5) : Ground (3)(4) : No connect (6) : Output (in mm) Rg = 50 R1 = 280 5% R2 = 330 5% C2 = 10 2 pF (Including stray capacitance and Input capacitance of RF Volt Meter) E1 : S.S.G. Output Voltage (1) : Input (2)(5) : Ground (3)(4) : No connect (6) : Output Continued on the following page. 6 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Continued from the preceding page. Frequency Characteristics Standard Type 0 7.0 1 6.0 1 6.0 2 5.0 2 5.0 3 4.0 3 4.0 4 3.0 4 3.0 5 2.0 5 2.0 6 1.0 6 1.0 10.700 Frequency (MHz) 10.900 7 0.0 11.100 10.300 10.700 Frequency (MHz) 10.900 0.0 11.100 SFECF10M7EA00-R0 7.0 0 7.0 1 6.0 1 6.0 2 5.0 2 5.0 3 4.0 3 4.0 4 3.0 4 3.0 5 2.0 5 2.0 6 1.0 6 1.0 7 10.300 10.500 10.700 Frequency (MHz) 10.900 Attenuation (dB) 0 G.D.T. (sec.) Attenuation (dB) SFECF10M7FA00-R0/SFECF10M7FF00-R0 10.500 7 0.0 11.100 10.300 SFECF10M7DA0001-R0 10.500 10.700 Frequency (MHz) 10.900 0.0 11.100 SFECF10M7DF00-R0 0 7.0 1 6.0 1 6.0 2 5.0 2 5.0 3 4.0 3 4.0 4 3.0 4 3.0 5 2.0 5 2.0 6 1.0 6 1.0 7 10.500 10.700 Frequency (MHz) 10.900 0.0 11.100 Attenuation (dB) 7.0 G.D.T. (sec.) 0 10.300 G.D.T. (sec.) 10.500 7 10.300 10.500 10.700 Frequency (MHz) 10.900 G.D.T. (sec.) 7 G.D.T. (sec.) 7.0 Attenuation (dB) 0 10.300 Attenuation (dB) 1 SFECF10M7GA00-R0/SFECF10M7GF00-R0 G.D.T. (sec.) Attenuation (dB) SFECF10M7HA00-R0/SFECF10M7HF00-R0 0.0 11.100 7 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Frequency Characteristics High-reliability Type 0 7.0 1 6.0 1 6.0 2 5.0 2 5.0 3 4.0 3 4.0 4 3.0 4 3.0 5 2.0 5 2.0 6 1.0 6 1.0 10.500 10.700 Frequency (MHz) 10.900 7 0.0 11.100 10.300 10.900 0.0 11.100 SFECF10M7EA00S0-R0 0 7.0 1 6.0 1 6.0 2 5.0 2 5.0 3 4.0 3 4.0 4 3.0 4 3.0 5 2.0 5 2.0 6 1.0 6 1.0 7 10.500 10.700 Frequency (MHz) 10.900 7 0.0 11.100 10.300 7.0 1 6.0 2 5.0 3 4.0 4 3.0 5 2.0 6 1.0 7 10.300 10.500 10.700 Frequency (MHz) 10.900 0.0 11.100 G.D.T. (sec.) SFECF10M7DF00S0-R0 0 Attenuation (dB) 7.0 10.300 8 10.700 Frequency (MHz) 0 G.D.T. (sec.) Attenuation (dB) SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R0 10.500 10.500 10.700 Frequency (MHz) 10.900 0.0 11.100 G.D.T. (sec.) 7 10.300 Attenuation (dB) 7.0 G.D.T. (sec.) SFECF10M7GA00S0-R0/SFECF10M7GF00S0-R0 0 G.D.T. (sec.) Attenuation (dB) SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R0 Attenuation (dB) 1 P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Frequency Characteristics (Spurious) Standard Type 0 0 10 10 20 20 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 10 10 20 20 30 40 60 60 11.700 11.700 12.700 40 50 10.700 Frequency (MHz) 10.700 Frequency (MHz) 30 50 9.700 9.700 SFECF10M7EA00-R0 0 Attenuation (dB) Attenuation (dB) SFECF10M7FA00-R0/SFECF10M7FF00-R0 0 70 8.700 1 SFECF10M7GA00-R0/SFECF10M7GF00-R0 Attenuation (dB) Attenuation (dB) SFECF10M7HA00-R0/SFECF10M7HF00-R0 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFECF10M7DA0001-R0/SFECF10M7DF00-R0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 9 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Frequency Characteristics (Spurious) High-reliability Type SFECF10M7GA00S0-R0/SFECF10M7GF00S0-R0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 10.700 Frequency (MHz) 11.700 12.700 SFECF10M7DF00S0-R0 0 10 20 30 40 50 60 70 8.700 10 9.700 10.700 Frequency (MHz) 11.700 12.700 11.700 12.700 40 50 9.700 10.700 Frequency (MHz) 30 50 70 8.700 9.700 SFECF10M7EA00S0-R0 0 Attenuation (dB) Attenuation (dB) SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R0 Attenuation (dB) 1 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment Chip Type SFECV/SFECK Series 2 6.90.3 4.050.4 SFECV/SFECK10M7 series for FM receivers are monolithic type ceramic filters which utilize the thickness expander mode of piezoelectric ceramics. SFECV series enable customers to make AM/FM set very thin, and it can be of help to the total chip circuit. 2.90.3 1.20.5 1.50.2 1.20.5 * * * (3) (2) (1) 1.50.2 Features 1.20.3 1. The piezoelectric element is sandwiched by heat resistant substrate, thus it has excellent mechanical strength, and it is suitable for automatic mounting. 2. Various bandwidths are available. Select a suitable type in accordance with the desired selectivity. 3. Operating Temperature Range: -20 to +80 (degrees C)(Standard Type) -40 to +85 (degrees C)(High-reliability Type) Storage Temperature Range: -40 to +85 (degrees C)(Standard Type) -55 to +85 (degrees C)(High-reliability Type) : Marking 1.00.5 1.00.5 (1) : Input (2) : Ground (3) : Output 1.00.5 ** : EIAJ Monthly Code ** : Center Frequency Rank Code (in mm) Applications 1. Small, thin radios 2. Automotive radios 3. Headphone stereos Standard Type Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Ripple (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFECV15M0EQ0001-R0 15.000 50kHz 300 min. 750 max. 7.0 max. 1.0 max. 30 min. [within 14MHz to fo] 30 min. [within fo to 16MHz] 330 SFECV10M7KA00-R0 10.700 30kHz 110 30kHz 320 max. 6.0 2.0dB 1.0 max. 35 min. [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 SFECV10M7JA00-R0 10.700 30kHz 150 40kHz 380 max. 5.5 2.0dB 1.0 max. 35 min. [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 Attenuation Insertion Loss (kHz) (dB) Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. High-reliability Type Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) SFECK10M7KA00S0-R0 10.700 30kHz 110 30kHz 320 max. SFECK10M7JA00S0-R0 10.700 30kHz 150 40kHz 380 max. Ripple (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) 6.0 2.0dB 1.0 max. 35 min. [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 5.5 2.0dB 1.0 max. 35 min. [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 Attenuation Insertion Loss (kHz) (dB) Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 11 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 Standard Center Frequency Rank Code 2 CODE 30kHz Step 25kHz Step D 10.64MHz30kHz 10.650MHz25kHz B 10.67MHz30kHz 10.675MHz25kHz A 10.70MHz30kHz 10.700MHz25kHz C 10.73MHz30kHz 10.725MHz25kHz E 10.76MHz30kHz 10.750MHz25kHz Z Combination A, B, C, D, E M Combination A, B, C Standard Land Pattern Dimensions 1.2 1.2 Test Circuit 1.2 R1 (2) Rg 4.0 (3) (1) E1 R2 C2 E2 S.S.G. =-10dBm 1.65 1.65 2.85 2.85 Land Rg = 50 R1 = 280 5% R2 = 330 5% C2 = 10 2 pF (Including stray capacitance and Input capacitance of RF Volt Meter) E1 : S.S.G. Output Voltage (in mm) RF Voltmeter (1) : Input (2) : Ground (3) : Output Frequency Characteristics Standard Type 8.0 4 6.0 6 4.0 8 2.0 10 14.700 14.800 14.900 15.000 15.100 Frequency (MHz) 15.200 7.5 2 7.0 3 6.5 4 6.0 5 5.5 6 5.0 7 10.300 12 10.500 10.700 Frequency (MHz) 10.900 4.5 11.100 G.D.T. (sec.) Attenuation (dB) 1 1 6.5 2 6.0 3 5.5 4 5.0 5 4.5 6 4.0 10.300 SFECV10M7JA00-R0 8.0 7.0 7 0.0 15.300 0 0 10.500 10.700 Frequency (MHz) 10.900 3.5 11.100 G.D.T. (sec.) 2 Attenuation (dB) SFECV10M7KA00-R0 10.0 G.D.T. (sec.) Attenuation (dB) SFECV15M0EQ0001-R0 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Frequency Characteristics High-reliability Type SFECK10M7JA00S0-R0 8.0 1 6.5 1 7.5 2 6.0 2 7.0 3 5.5 3 6.5 4 5.0 4 6.0 5 4.5 5 5.5 6 4.0 6 5.0 7 10.300 10.500 10.700 Frequency (MHz) 10.900 3.5 11.100 7 10.300 10.500 10.700 Frequency (MHz) 10.900 2 G.D.T. (sec.) 0 Attenuation (dB) 7.0 G.D.T. (sec.) Attenuation (dB) SFECK10M7KA00S0-R0 0 4.5 11.100 Frequency Characteristics (Spurious) Standard Type SFECV15M0EQ0001-R0 SFECV10M7KA00-R0 0 0 10 10 20 30 Attenuation (dB) Attenuation (dB) 20 40 50 30 40 50 60 60 70 80 13.000 14.000 15.000 Frequency (MHz) 16.000 70 8.700 17.000 9.700 10.700 Frequency (MHz) 11.700 12.700 11.700 12.700 SFECV10M7JA00-R0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 Frequency Characteristics (Spurious) High-reliability Type SFECK10M7JA00S0-R0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFECK10M7KA00S0-R0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 13 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment Standard Lead Type SFELF Series 7.02.0 SFELF10M7 series for FM receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. As part of our environmental protection compliance, solder for terminal plating and terminal-element connection inside of the ceramic filter contains no lead (Pb). EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 Features 3.01.0 SFELF10M7HA00-B0 (3) (1) : Input (2) : Ground (3) : Output (in mm) (1) (2) 7.02.0 MARKING EIAJ CODE 7.02.0 1. High mechanical strength 2. Low loss, favorable waveform symmetry, and high selectivity 3. Various bandwidths are available for applications in wide to narrow bands. 4. Small dispersion and stable characteristics 5. Change in center frequency is typically within +-30ppm/(degrees C) at -20 to +80 (degrees C). 6. High reliability 0.30.1 2.50.2 2.50.2 5.01.0 1.380.2 1.70.1 0.50.1 3.01.0 SFELF10M7GA00-B0 0.30.1 2.50.2 2.50.2 (3) (1) : Input (2) : Ground (3) : Output (in mm) (1) (2) 7.02.0 EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 2.50.2 2.50.2 3.01.0 SFELF10M7FA00-B0 0.30.1 3 (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFELF10M7HA00-B0 10.700 30kHz 180 40kHz 520 max. 7.0 max. 40 min. [within 9MHz to fo] 40 min. [within fo to 12MHz] 330 SFELF10M7GA00-B0 10.700 30kHz 230 50kHz 570 max. 4.0 2.0dB 40 min. [within 9MHz to fo] 40 min. [within fo to 12MHz] 330 SFELF10M7FA00-B0 10.700 30kHz 280 50kHz 650 max. 4.0 2.0dB 30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 Part Number Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 14 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C 3 Test Circuit (1) R1 (2) (3) RF Rg C R2 Voltmeter S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) (1) : Input (2) : Ground (3) : Output Frequency Characteristics 6.0 1 6.0 1 5.5 2 5.5 2 5.0 3 5.0 3 4.5 4 4.5 4 4.0 5 4.0 5 3.5 6 3.5 6 3.0 7 10.500 10.600 10.700 Frequency (MHz) 10.800 Attenuation (dB) 0 7 3.0 10.900 10.500 10.600 10.700 Frequency (MHz) 10.800 G.D.T. (sec.) SFELF10M7GA00-B0 6.5 G.D.T. (sec.) Attenuation (dB) SFELF10M7HA00-B0 0 2.5 10.900 5.5 1 5.0 2 4.5 3 4.0 4 3.5 5 3.0 6 2.5 7 10.500 10.600 10.700 Frequency (MHz) 10.800 G.D.T. (sec.) Attenuation (dB) SFELF10M7FA00-B0 0 2.0 10.900 15 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Frequency Characteristics (Spurious) 3 SFELF10M7GA00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELF10M7HA00-B0 0 30 40 50 60 60 9.700 10.700 Frequency (MHz) 11.700 12.700 SFELF10M7FA00-B0 0 10 20 Attenuation (dB) 40 50 70 8.700 30 40 50 60 70 8.700 16 30 9.700 10.700 Frequency (MHz) 11.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P50E.pdf May.23,2011 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment Low Loss Type SFELF Series 7.02.0 SFELF10M7 series for FM receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. As part of the environment protection activity, solder for terminal plating and terminal-element connection inside of ceramic filter contain no lead (Pb). EIAJ CODE 7.02.0 MARKING 4 5.01.0 1.380.2 1.70.1 0.50.1 Features SFELF10M7JAA0-B0 3.01.0 1. Insertion loss is 1 to 1.5dB lower than conventional products. These types are useful for elevating the sensitivity of sets. 2. Small dispersion and stable characteristics 3. Excellent shape factor of frequency response 4. Good waveform symmetry 0.30.1 2.50.2 2.50.2 (3) (1) : Input (2) : Ground (3) : Output (in mm) (1) (2) 7.02.0 EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 3.01.0 (3) MARKING MARKING 7.02.0 7.02.0 EIAJ CODE 0.50.1 (3) (2) (1) : Input (2) : Ground (3) : Output SFELF10M7FAA0-B0 0.30.1 2.50.2 2.50.2 3.01.0 SFELF10M7GAA0-B0 0.30.1 2.50.2 2.50.2 3.01.0 0.50.1 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 (in mm) (1) (2) 7.02.0 EIAJ CODE (1) : Input (2) : Ground (3) : Output 7.02.0 SFELF10M7HAA0-B0 0.30.1 2.50.2 2.50.2 (in mm) (1) (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFELF10M7JAA0-B0 10.700 30kHz 150 40kHz 360 max. 4.5 2.0dB 35 min. [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 SFELF10M7HAA0-B0 10.700 30kHz 180 40kHz 470 max. 3.5 1.5dB 35 min. [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 SFELF10M7GAA0-B0 10.700 30kHz 230 50kHz 520 max. 3.0 2.0dB 35 min. [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 SFELF10M7FAA0-B0 10.700 30kHz 280 50kHz 590 max. 2.5 2.0dB 30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 Part Number Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 17 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C Test Circuit (1) R1 (2) (3) RF Rg C R2 Voltmeter S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) (1) : Input (2) : Ground (3) : Output Frequency Characteristics 0 6.5 1 6.5 1 6.0 2 6.0 2 5.5 3 5.5 3 5.0 4 5.0 4 4.5 5 4.5 5 4.0 6 4.0 6 3.5 10.600 10.700 Frequency (MHz) 10.800 7 3.5 10.900 10.500 SFELF10M7GAA0-B0 10.700 Frequency (MHz) 10.800 3.0 10.900 SFELF10M7FAA0-B0 0 5.5 1 5.5 1 5.0 2 5.0 2 4.5 3 4.5 3 4.0 4 4.0 4 3.5 5 3.5 5 3.0 6 3.0 6 2.5 7 10.600 10.700 Frequency (MHz) 10.800 2.5 10.900 Attenuation (dB) 6.0 G.D.T. (sec.) 0 10.500 18 10.600 7 10.500 10.600 10.700 Frequency (MHz) 10.800 2.0 10.900 G.D.T. (sec.) 7 10.500 Attenuation (dB) 7.0 G.D.T. (sec.) SFELF10M7HAA0-B0 0 G.D.T. (sec.) Attenuation (dB) SFELF10M7JAA0-B0 Attenuation (dB) 4 CODE P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Frequency Characteristics (Spurious) SFELF10M7HAA0-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELF10M7JAA0-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 10.700 Frequency (MHz) 11.700 12.700 40 50 9.700 11.700 30 50 70 8.700 10.700 Frequency (MHz) SFELF10M7FAA0-B0 0 Attenuation (dB) Attenuation (dB) SFELF10M7GAA0-B0 4 9.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 19 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment Low Profile Type SFELG Series SFELG10M7 series for FM receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. As part of the environment protection activity, solder for terminal plating and terminal-element connection inside of ceramic filter contain no lead (Pb). 5.01.0 0.50.1 3.01.0 SFELG10M7KA00-B0 0.30.1 2.50.2 2.50.2 1. Installed height is 6.0mm, making it well suited for compact, thin sets. 2. Environmental reliability is the same as those of the ceramic filter SFELF10M7 series. (1) MARKING EIAJ CODE 0.50.1 0.50.1 SFELG10M7HA00-B0 3.01.0 3.01.0 (in mm) (3) (1) MARKING (in mm) (3) 7.52.0 EIAJ CODE 6.0 max. 7.52.0 (2) (1) : Input (2) : Ground (3) : Output MARKING 0.50.1 3.01.0 2.50.2 2.50.2 (1) (2) (1) : Input (2) : Ground (3) : Output SFELG10M7FA00-B0 0.30.1 2.50.2 2.50.2 3.01.0 0.50.1 5.01.0 1.50.1 1.30.1 5.01.0 1.50.1 1.30.1 EIAJ CODE 6.0 max. (2) (1) : Input (2) : Ground (3) : Output 0.30.1 2.50.2 2.50.2 0.30.1 2.50.2 2.50.2 (1) 5.01.0 1.50.1 1.30.1 5.01.0 1.50.1 1.30.1 SFELG10M7GA00-B0 (in mm) (3) 6.0 max. EIAJ CODE MARKING (2) (1) : Input (2) : Ground (3) : Output 7.52.0 6.0 max. 7.52.0 SFELG10M7JA00-B0 EIAJ CODE 1.50.1 1.30.1 Features 0.30.1 5 MARKING 6.0 max. 7.52.0 (in mm) (3) (1) (2) (1) : Input (2) : Ground (3) : Output (in mm) (3) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFELG10M7KA00-B0 10.700 30kHz 110 30kHz 350 max. 7.0 2.0dB 30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 SFELG10M7JA00-B0 10.700 30kHz 150 40kHz 360 max. 4.5 2.0dB 35 min. [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 SFELG10M7HA00-B0 10.700 30kHz 180 40kHz 470 max. 3.5 2.0dB 35 min. [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 SFELG10M7GA00-B0 10.700 30kHz 230 50kHz 570 max. 3.0 2.0dB 40 min. [within 9MHz to fo] 40 min. [within fo to 12MHz] 330 Part Number Continued on the following page. 20 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Continued from the preceding page. Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) 10.700 30kHz 280 50kHz 650 max. 3.0 2.0dB 30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 SFELG10M7FA00-B0 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C 5 Test Circuit (1) R1 (2) (3) RF Rg C R2 Voltmeter S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) (1) : Input (2) : Ground (3) : Output Frequency Characteristics 7.5 1 7.5 1 7.0 2 7.0 2 6.5 3 6.5 3 6.0 4 6.0 4 5.5 5 5.5 5 5.0 6 5.0 6 4.5 10.600 10.700 Frequency (MHz) 10.800 4.5 10.900 7 10.500 10.700 Frequency (MHz) 10.800 4.0 10.900 SFELG10M7GA00-B0 6.5 0 6.0 1 6.0 1 5.5 2 5.5 2 5.0 3 5.0 3 4.5 4 4.5 4 4.0 5 4.0 5 3.5 6 3.5 6 3.0 7 10.500 10.600 10.700 Frequency (MHz) 10.800 3.0 10.900 Attenuation (dB) 0 G.D.T. (sec.) Attenuation (dB) SFELG10M7HA00-B0 10.600 7 10.500 10.600 10.700 Frequency (MHz) 10.800 G.D.T. (sec.) 7 10.500 Attenuation (dB) 0 G.D.T. (sec.) SFELG10M7JA00-B0 8.0 G.D.T. (sec.) Attenuation (dB) SFELG10M7KA00-B0 0 2.5 10.900 Continued on the following page. 21 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics 5.5 1 5.0 2 4.5 3 4.0 4 3.5 5 3.0 6 2.5 7 10.500 10.600 10.700 Frequency (MHz) 10.800 G.D.T. (sec.) Attenuation (dB) SFELG10M7FA00-B0 0 2.0 10.900 5 Frequency Characteristics (Spurious) SFELG10M7JA00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELG10M7KA00-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 10.700 Frequency (MHz) 11.700 12.700 SFELG10M7FA00-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 22 9.700 10.700 Frequency (MHz) 11.700 12.700 40 50 9.700 11.700 30 50 70 8.700 10.700 Frequency (MHz) SFELG10M7GA00-B0 0 Attenuation (dB) Attenuation (dB) SFELG10M7HA00-B0 9.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment Low Spurious Response Type SFELF Series 7.52.0 SFELF10M7 series for FM receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. As part of the environment protection activity, solder for terminal plating and terminal-element connection inside of ceramic filter contain no lead (Pb). EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 SFELF10M7KAB0-B0 3.01.0 These types have lower spurious response compared to the standard filters. 0.30.1 2.50.2 2.50.2 Features (3) (1) (2) (in mm) 7.52.0 MARKING MARKING EIAJ CODE 7.02.0 7.52.0 EIAJ CODE 0.50.1 (3) (1) (2) (3) (in mm) (1) (2) 7.52.0 7.52.0 MARKING MARKING EIAJ CODE EIAJ CODE (in mm) 0.50.1 (3) (2) (1) SFELF10M7FAB0-B0 0.30.1 2.50.2 2.50.2 3.01.0 0.30.1 2.50.2 2.50.2 3.01.0 0.50.1 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 SFELF10M7GAB0-B0 3.01.0 SFELF10M7HAB0-B0 0.30.1 3.01.0 2.50.2 2.50.2 7.02.0 SFELF10M7JAB0-B0 0.30.1 2.50.2 2.50.2 7.02.0 0.50.1 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 7.02.0 6 (3) (in mm) (2) (1) (in mm) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFELF10M7KAB0-B0 10.700 30kHz 110 30kHz 350 max. 7.0 2.0dB 45/30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 SFELF10M7JAB0-B0 10.700 30kHz 150 40kHz 380 max. 5.5 2.0dB 45 min. [within 9MHz to fo] 45 min. [within fo to 12MHz] 330 SFELF10M7HAB0-B0 10.700 30kHz 180 40kHz 520 max. 5.0 2.0dB 45 min. [within 9MHz to fo] 45 min. [within fo to 12MHz] 330 SFELF10M7GAB0-B0 10.700 30kHz 230 50kHz 570 max. 3.0 2.0dB 45 min. [within 9MHz to fo] 45 min. [within fo to 12MHz] 330 Part Number Continued on the following page. 23 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Continued from the preceding page. Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) 10.700 30kHz 280 50kHz 650 max. 3.0 2.0dB 45 min. [within 9MHz to fo] 45 min. [within fo to 12MHz] 330 SFELF10M7FAB0-B0 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code 6 CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C Test Circuit (1) R1 (2) (3) RF Rg C R2 Voltmeter S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) (1) : Input (2) : Ground (3) : Output Frequency Characteristics 7.0 1 7.5 1 6.5 2 7.0 2 6.0 3 6.5 3 5.5 4 6.0 4 5.0 5 5.5 5 4.5 6 5.0 6 4.0 10.600 10.700 Frequency (MHz) 10.800 4.5 10.900 7 10.500 10.700 Frequency (MHz) 10.800 3.5 10.900 SFELF10M7GAB0-B0 6.5 0 6.0 1 6.0 1 5.5 2 5.5 2 5.0 3 5.0 3 4.5 4 4.5 4 4.0 5 4.0 5 3.5 6 3.5 6 3.0 7 10.500 10.600 10.700 Frequency (MHz) 10.800 3.0 10.900 Attenuation (dB) 0 G.D.T. (sec.) Attenuation (dB) SFELF10M7HAB0-B0 10.600 7 10.500 10.600 10.700 Frequency (MHz) 10.800 G.D.T. (sec.) 7 10.500 Attenuation (dB) 0 G.D.T. (sec.) SFELF10M7JAB0-B0 8.0 G.D.T. (sec.) Attenuation (dB) SFELF10M7KAB0-B0 0 2.5 10.900 Continued on the following page. 24 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Continued from the preceding page. Frequency Characteristics 5.5 1 5.0 2 4.5 3 4.0 4 3.5 5 3.0 6 2.5 7 10.500 10.600 10.700 Frequency (MHz) 10.800 G.D.T. (sec.) Attenuation (dB) SFELF10M7FAB0-B0 0 2.0 10.900 Frequency Characteristics (Spurious) SFELF10M7JAB0-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELF10M7KAB0-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 12.700 10 10 20 20 30 40 60 60 11.700 10.700 Frequency (MHz) 11.700 12.700 40 50 10.700 Frequency (MHz) 9.700 30 50 9.700 8.700 SFELF10M7GAB0-B0 0 Attenuation (dB) Attenuation (dB) SFELF10M7HAB0-B0 0 70 8.700 6 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFELF10M7FAB0-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 25 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment Wide Bandwidth Type SFELF Series 7.02.0 SFELF10M7 series for FM receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. As part of the environment protection activity, solder for terminal plating and terminal-element connection inside of ceramic filter contain no lead (Pb). EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 Features SFELF10M7EA00-B0 (1) : Input (2) : Ground (3) : Output 3.01.0 Realizes wider band characteristics not obtained by conventional ceramic filters. 0.30.1 2.50.2 2.50.2 (3) (in mm) (1) (2) 7.02.0 7 EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 (3) Center Nominal Center 3dB Frequency Frequency (fn) Bandwidth (fo) (MHz) (MHz) (kHz) Part Number (1) : Input (2) : Ground (3) : Output 3.01.0 SFELF10M7DF00-B0 0.30.1 2.50.2 2.50.2 (2) (in mm) (1) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFELF10M7EA00-B0 10.700 30kHz - 330 50kHz 680 max. 4.0 2.0dB 30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 SFELF10M7DF00-B0 - 10.700 fn175 min. 950 max. 3.0 2.0dB 20 min. [within 5MHz to fn] 20 min. [within fn to 15MHz] 470 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code (SFELF10M7EA00-B0) 26 CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Test Circuit (1) R1 (2) (3) RF Rg C R2 Voltmeter S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) (1) : Input (2) : Ground (3) : Output Frequency Characteristics SFELF10M7DF00-B0 4.5 1 4.0 1 4.0 2 3.5 2 3.5 3 3.0 3 3.0 4 2.5 4 2.5 5 2.0 5 2.0 6 1.5 6 1.5 7 10.300 10.500 10.700 Frequency (MHz) 10.900 7 1.0 11.100 10.300 10.500 10.700 Frequency (MHz) 10.900 7 G.D.T. (sec.) 0 Attenuation (dB) 4.5 G.D.T. (sec.) Attenuation (dB) SFELF10M7EA00-B0 0 1.0 11.100 Frequency Characteristics (Spurious) SFELF10M7DF00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELF10M7EA00-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 27 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment Narrow Bandwidth Type SFVLF/SFKLF/SFELF Series 7.0 2.0 Features EIAJ CO DE 5.0 1.0 1 .65 0. 1 1 .40 .1 0. 50 .1 3.0 1.0 0.30 .1 2.50.2 2.50.2 SFVLF10M7MF00-B0 (3) (2) (in mm) EIAJ CODE 1. 650.1 5.01.0 1.380.2 1.70.1 5.0 1.0 1. 40. 1 0. 50. 1 10.02.0 7.0 2.0 EI AJ CODE 0.50.1 (1 ) 2.50.2 2.50.2 +1.5 3.5 -1.0 (in mm) (3) 7.02.0 7.02.0 MARKING MARKING EIAJ CODE EIAJ CODE 0.50.1 (3) (2) (1) : Input (2) : Ground (3) : Output SFELF10M7KAH0-B0 0.30.1 2.50.2 2.50.2 3.01.0 0.30.1 2.50.2 2.50.2 3.01.0 0.50.1 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 (in mm) (1) (2) (1) : Input (2) : Ground (3) : Output 7.02.0 (2) SFKLF10M7NL00-B0 7.02.0 (3) (1) : Input (2) : Ground (3) : Output 0.30.1 3.0 1.0 0.30. 1 2.50.2 2.50.2 SFVLF10M7LF00-B0 Part Number (1 ) MARKING MARKING SFELF10M7LFTA-B0 (1) : Input (2) : Ground (3) : Output 10.02.0 7.0 2.0 8 7.0 2.0 MARKING SFELF10M7LFTA/KAH0, SFVLF/SFKLF series realizes narrower band characteristics not obtained by conventional ceramic filters. In addition, low spurious and temperature characteristics are stable. This series is suitable for European car-audio or AM conversion use that needs narrow band characteristics. As part of the environment protection activity, solder for terminal plating and terminal-element connection inside of ceramic filter contain no lead (Pb). (in mm) (1) (3) Center Nominal Center 3dB Frequency Frequency (fn) Bandwidth (fo) (MHz) (MHz) (kHz) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFVLF10M7MF00-B0 - 10.700 fn13 min. 135 max. 5.0 2.0dB 35 min. [within 9MHz to fn] 35 min. [within fn to 12MHz] 330 SFVLF10M7LF00-B0 - 10.700 fn25 min. - 5.5 2.5dB 30 min. [within 9MHz to fn] 30 min. [within fn to 12MHz] 330 SFKLF10M7NL00-B0 10.700 15kHz - 20 min. 95 max. 6.0 max. SFELF10M7LFTA-B0 - 10.700 fn25 min. 280 max. 7.0 2.0dB 24 min. 24 min. [within fo-1MHz to fo] [within fo to fo+1MHz] 30 min. [within 9MHz to fn] 30 min. [within fn to 12MHz] 600 330 Continued on the following page. 28 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Continued from the preceding page. Center Nominal Center 3dB Frequency Frequency (fn) Bandwidth (fo) (MHz) (MHz) (kHz) Part Number 10.700 30kHz SFELF10M7KAH0-B0 110 30kHz - Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) 350 max. 7.0 2.0dB 30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code (SFELF10M7KAH0-B0) CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C Test Circuit (1) R1 (2) (3) RF Rg 8 Voltmeter C R2 S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) (1) : Input (2) : Ground (3) : Output Frequency Characteristics 15.0 1 18.0 1 14.0 2 17.0 2 13.0 3 16.0 3 12.0 4 15.0 4 11.0 5 14.0 5 10.0 6 13.0 6 9.0 10.650 10.700 Frequency (MHz) 10.750 7 12.0 10.800 10.600 10.700 Frequency (MHz) 10.750 8.0 10.800 SFELF10M7LFTA-B0 0 0 12.0 1 1 11.0 2 2 10.0 3 9.0 4 8.0 5 5 7.0 6 6 6.0 Attenuation (dB) Attenuation (dB) SFKLF10M7NL00-B0 10.650 3 4 7 10.600 7 10.650 10.700 Frequency (MHz) 10.750 10.800 10.600 10.650 10.700 Frequency (MHz) 10.750 G.D.T. (sec.) 7 10.600 Attenuation (dB) 0 G.D.T. (sec.) SFVLF10M7LF00-B0 19.0 G.D.T. (sec.) Attenuation (dB) SFVLF10M7MF00-B0 0 5.0 10.800 Continued on the following page. 29 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics 8.0 1 7.5 2 7.0 3 6.5 4 6.0 5 5.5 6 5.0 7 10.600 10.650 10.700 Frequency (MHz) 10.750 G.D.T. (sec.) Attenuation (dB) SFELF10M7KAH0-B0 0 4.5 10.800 Frequency Characteristics (Spurious) SFVLF10M7LF00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFVLF10M7MF00-B0 0 30 40 8 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 50 12.700 30 40 60 70 9.700 10.200 10.700 11.200 11.700 Frequency (MHz) SFELF10M7KAH0-B0 0 10 20 Attenuation (dB) 11.700 50 60 30 40 50 60 70 8.700 30 10.700 Frequency (MHz) SFELF10M7LFTA-B0 0 Attenuation (dB) Attenuation (dB) SFKLF10M7NL00-B0 9.700 9.700 10.700 Frequency (MHz) 11.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P50E.pdf May.23,2011 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment For FM-IF Tuners SFELF Series 7.02.0 SFELF10M7 series for FM receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. As part of the environment protection activity, solder for terminal plating and terminal-element connection inside of ceramic filter contain no lead (Pb). EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 Features (1) : Input (2) : Ground (3) : Output 3.01.0 SFELF10M7HA0G-B0 (3) (in mm) (1) (2) 7.02.0 MARKING EIAJ CODE 7.02.0 1. Little dispersion of amplitude characteristics and phase characteristics (GDT characteristics) 2. The SFELF_G series is based on SFELF_FA00/GA00/HA00, and it obtains high selectivity with low loss. There is little dispersion of amplitude and GDT characteristics, and low distortion rate can be obtained. 3. The flatness of GDT is inspected for all products. 0.30.1 2.50.2 2.50.2 5.01.0 1.380.2 1.70.1 0.50.1 (1) : Input (2) : Ground (3) : Output 3.01.0 SFELF10M7GA0G-B0 0.30.1 2.50.2 2.50.2 (3) (in mm) (1) (2) 7.02.0 EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 (3) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) SFELF10M7HA0G-B0 10.700 30kHz 180 40kHz 520 max. SFELF10M7GA0G-B0 10.700 30kHz 230 50kHz SFELF10M7FA0G-B0 10.700 30kHz 280 50kHz Part Number (1) : Input (2) : Ground (3) : Output 3.01.0 SFELF10M7FA0G-B0 0.30.1 2.50.2 2.50.2 (2) (in mm) (1) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) GDT Bandwidth (kHz) Input/Output Impedance (ohm) 7.0 max. 40 min. [within 9MHz to fo] 40 min. [within fo to 12MHz] fo45 min. [within 0.5sec.] 330 600 max. 7.0 max. 40 min. [within 9MHz to fo] 40 min. [within fo to 12MHz] fo60 min. [within 0.5sec.] 330 650 max. 4.0 2.0dB 30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] fo85 min. [within 0.5sec.] 330 Attenuation Insertion Loss (kHz) (dB) Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 31 9 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C Test Circuit R1 (1) (2) (3) RF Rg R2 C Voltmeter S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) (1) : Input (2) : Ground (3) : Output Frequency Characteristics 6.0 1 6.0 1 5.5 2 5.5 2 5.0 3 5.0 3 4.5 4 4.5 4 4.0 5 4.0 5 3.5 6 3.5 6 3.0 7 10.400 10.500 10.600 10.700 10.800 Frequency (MHz) 10.900 7 3.0 11.000 10.400 5.5 1 5.0 2 4.5 3 4.0 4 3.5 5 3.0 6 2.5 7 10.400 32 10.500 10.600 10.700 10.800 Frequency (MHz) 10.900 2.0 11.000 G.D.T. (sec.) Attenuation (dB) SFELF10M7FA0G-B0 0 Attenuation (dB) 0 G.D.T. (sec.) Attenuation (dB) 9 SFELF10M7GA0G-B0 6.5 10.500 10.600 10.700 10.800 Frequency (MHz) 10.900 2.5 11.000 G.D.T. (sec.) SFELF10M7HA0G-B0 0 P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Frequency Characteristics (Spurious) SFELF10M7GA0G-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELF10M7HA0G-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFELF10M7FA0G-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 9 33 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. CERAFILr 10.7MHz Related Data on Lead Type Temperature Characteristics Variation (kHz) W20 SFELF10M7HA00-B0 Center frequency 0 Y20 W2 W1 Y20 0 W20 W40 Temperature (C) W60 W80 Variation (dB) Y40 Insertion loss 0 Y1 Y2 W40 W20 Y20 0 W20 W40 Temperature (C) W60 W80 Variation (kHz) Variation (kHz) Variation (dB) Variation (kHz) SFELF10M7GA00-B0 W40 3dB Bandwidth 0 Y20 Y40 Y20 0 W20 W40 Temperature (C) W60 W80 W40 W20 Center frequency 0 Y20 Y40 W2 W1 Y20 0 W20 W40 Temperature (C) W60 W80 0 W20 W40 Temperature (C) W60 W80 0 W20 W40 Temperature (C) W60 W80 Insertion loss 0 Y1 Y2 W40 W20 Y20 3dB Bandwidth 0 Y20 Y40 Y20 Matching Conditions *The SFELF10M7 series are of input/output symmetric structure so that in theory there is no input/output directionality. Actual circuits may use different input/output loading conditions (for example, mismatched impedance) or capacitance load. In such cases, the waveform will be a little changed by the direction of the input/output of the ceramic filters. Loaded Resistance and Waveform (Rg+R1=330 ohm) Attenuation (dB) R2=560 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) R2=1k 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) Group Delay Time (sec.) Attenuation (dB) 0 1 2 3 4 5 6 7 Group Delay Time (sec.) 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) R2=330 Attenuation (dB) 1.2 1.0 0.8 0.6 0.4 0.2 0 Group Delay Time (sec.) Attenuation (dB) 0 1 2 3 4 5 6 7 Group Delay Time (sec.) SFELF10M7GA00-B0 R2=220 Loaded Capacitance and Waveform (Rg+R1=R2=330 ohm) C=56pF 34 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) C=82pF 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) Group Delay Time (sec.) Attenuation (dB) 0 1 2 3 4 5 6 7 Group Delay Time (sec.) 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) C=33pF Attenuation (dB) 1.2 1.0 0.8 0.6 0.4 0.2 0 Group Delay Time (sec.) Attenuation (dB) 0 1 2 3 4 5 6 7 Group Delay Time (sec.) SFELF10M7HA00-B0 C=10pF Attenuation (dB) 9 *When using ceramic filters, it is most important to match the input/output load to impedance 330 ohm (SFELF10M7DF00-B0 is 470 ohm and SFKLF10M7NL00-B0 is 600 ohm matching). Waveform symmetry is damaged when reactance is added to the input/output load. *Two ceramic filters directly connected can be used for high selectivity. For reducing waveform variation, it is recommended to input a buffer AMP between ceramic filters. P50E.pdf May.23,2011 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 CERAFILr (CERAFILr 2.3-6.5MHz) for Audio/Visual Equipment 4.5-6.5MHz Chip Type SFSKA Series SMD ceramic filter SFSKA_CF is a small and thin SMD filter sealed with a metal cap. Recommended for LCD-TVs, and small and thin tuners. 7.90.2 3.00.1 1.80.2 Features 0.50.1 8.50.2 1. High attenuation outside bandwidth 2. Small and thin package 3. Reflow-solderable 0.60.2 3.80.2 1.00.1 1.30.2 0.30.1 1.30.2 (1) (2) (3) (1) : Input (2) : Ground (3) : Output (in mm) 2.50.2 2.50.2 Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) 20dB Bandwidth (kHz) Insertion Loss (dB) Spurious Attenuation(1) (dB) Spurious Attenuation(2) (dB) Input/Output Impedance (ohm) SFSKA4M50CF00-R3 4.500 fn60 min. 600 max. 6.0 max. 20 min. [within 0 to fn] 15 min. [within fn to 7.0MHz] 1000 SFSKA5M50CF00-R3 5.500 fn60 min. 600 max. 6.0 max. 25 min. [within 0 to fn] 15 min. [within fn to 7.0MHz] 600 SFSKA6M00CF00-R3 6.000 fn60 min. 600 max. 6.0 max. 25 min. [within 0 to fn] 15 min. [within fn to 7.5MHz] 470 SFSKA6M50CF00-R3 6.500 fn60 min. 600 max. 6.0 max. 25 min. [within 0 to fn] 15 min. [within fn to 8.5MHz] 470 Area of Insertion Loss: at minimum loss point For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Land Pattern Dimensions 10 Test Circuit SFSKA4M50CF00-R3 1.0 1.5 (1) (2) (3) 1.0 1.5 R1 Rg 4.8 1.0 E1 R2 C2 E2 RF Voltmeter S.S.G. (in mm) R1+Rg=R2=1000 5%, Rg=50 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1:S.S.G. Output voltage (1) : Input (2) : Ground (3) : Output Continued on the following page. 35 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Continued from the preceding page. Test Circuit SFSKA5M50CF00-R3 SFSKA6M00CF00-R3 (1) (2) (3) (1) (2) (3) R1 R1 Rg Rg E1 R2 C2 RF Voltmeter E2 S.S.G. E1 R2 C2 RF Voltmeter E2 S.S.G. R1+Rg=R2=600 5%, Rg=50 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1: S.S.G. Output voltage (1) : Input (2) : Ground (3) : Output R1+Rg=R2=470 5%, Rg=50 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1: S.S.G. Output voltage (1) : Input (2) : Ground (3) : Output SFSKA6M50CF00-R3 (1) (2) (3) R1 Rg E1 R2 C2 RF Voltmeter E2 S.S.G. R1+Rg=R2=470 5%, Rg=50 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1: S.S.G. Output voltage Frequency Characteristics SFSKA5M50CF00-R3 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFSKA4M50CF00-R3 30 40 50 60 30 40 50 60 70 70 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 4.5 5.5 4.7 4.9 5.1 SFSKA6M00CF00-R3 5.5 5.7 5.9 6.1 6.3 6.5 6.9 7.1 7.3 7.5 SFSKA6M50CF00-R3 0 10 20 20 Attenuation (dB) 0 10 30 40 50 60 30 40 50 60 70 70 5.0 5.2 5.4 5.6 5.8 6.0 6.2 Frequency (MHz) 36 5.3 Frequency (MHz) Frequency (MHz) Attenuation (dB) 10 (1) : Input (2) : Ground (3) : Output 6.4 6.6 6.8 7.0 5.5 5.7 5.9 6.1 6.3 6.5 6.7 Frequency (MHz) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Frequency Characteristics (Spurious) SFSKA5M50CF00-R3 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFSKA4M50CF00-R3 30 40 50 40 50 60 60 70 30 70 0.0 2.0 4.0 6.0 8.0 10.0 0 2.0 Frequency (MHz) 6.0 8.0 10.0 8.0 10.0 Frequency (MHz) SFSKA6M00CF00-R3 SFSKA6M50CF00-R3 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) 4.0 30 40 50 60 30 40 50 60 70 70 0 2.0 4.0 6.0 Frequency (MHz) 8.0 10.0 0 2.0 4.0 6.0 Frequency (MHz) 10 37 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 CERAFILr (CERAFILr 2.3-6.5MHz) for Audio/Visual Equipment 2.3-5.7MHz Chip Type SFSKB Series 5.20.1 (4) (1) 3.80.1 (3.5) The SFSKB series are SMD ceramic filters which are suitable for IR headphone applications. Center frequencies of 2.3, 2.8, 3.2, 3.8, 4.3, 4.8, 5.2, 5.7MHz are available. Realized Small, thin and lightweight package, compared with conventional LC filters. It helps to compose multi channel circuit on one PCB. No frequency adjustment is required on PCB and it contributes reduction of production cost. (2) (3) 1.350.15 (4.93) 4-0.35 Features (4) (1) 0.250.1 (0.1) 1.00.1 (1.6) (3) (2) 0.30.1 4-0.35 (0.1) 1.50.1 (2.0) Terminal Connection (1) : Input (2) : Output (3) : Ground (4) : Terminal for external capacitor : EIAJ Monthly Code Tolerance unless otherwise specified : 0.1mm ( ) : Reference (in mm) 1. SMD package in plastic emboss tape, available for automatic placing. 2. They are slim, at only 1.5mm max. thickness, and have a small mounting area (5.2x3.8mm) enabling flexible PCB design. 3. Available for lead (Pb) free re-flow soldering process. 4. Operating temperature range: 0 to +70 (degrees C) Storage temperature range: -55 to +85 (degrees C) 5. No frequency adjustment is required in production process. 6. Small, thin and lightweight package compared with conventional LC filters Applications 1. IR headphone 2. Set Top Box for satellite broadcasting 11 Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) 20dB Bandwidth (kHz) Insertion Loss (dB) Spurious Attenuation(1) (dB) Spurious Attenuation(2) (dB) Input/Output Impedance (ohm) SFSKB2M30GF00-R1 2.300 fn75 min. 650 max. 6.0 max. 25 min. [within 1.3 to 1.8MHz] 23 min. [within 2.8 to 3.3MHz] 1000 SFSKB2M80GF00-R1 2.800 fn75 min. 650 max. 6.0 max. 25 min. [within 1.8 to 2.3MHz] 25 min. [within 3.3 to 3.8MHz] 1000 SFSKB3M20FF00-R1 3.200 fn75 min. 650 max. 6.0 max. 30 min. [within 2.2 to 2.8MHz] 30 min. [within 3.8 to 4.2MHz] 1000 SFSKB3M80GF00-R1 3.800 fn75 min. 650 max. 6.0 max. 30 min. [within 2.8 to 3.2MHz] 30 min. [within 4.3 to 4.8MHz] 1000 SFSKB4M30GF00-R1 4.300 fn75 min. 650 max. 6.0 max. 30 min. [within 3.3 to 3.8MHz] 30 min. [within 4.8 to 5.3MHz] 1000 SFSKB4M80GF00-R1 4.800 fn75 min. 650 max. 6.0 max. 30 min. [within 3.8 to 4.3MHz] 30 min. [within 5.2 to 5.8MHz] 1000 SFSKB5M20GF00-R1 5.200 fn75 min. 650 max. 6.0 max. 30 min. [within 4.2 to 4.8MHz] 30 min. [within 5.7 to 6.2MHz] 1000 SFSKB5M70GF00-R1 5.700 fn75 min. 650 max. 6.0 max. 30 min. [within 4.7 to 5.2MHz] 30 min. [within 6.2 to 6.7MHz] 1000 For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 38 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Standard Land Pattern Dimensions 2.0 1.8 1.3 1.6 1.3 1.8 (in mm) Test Circuit R1+Rg=R2=1.0k Cc=22pF5% C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage (1) : Input (2) : Output (3) : Ground (4) : Terminal for external capacitor (1) (4) (2) (3) E2 (3) C2 (2) S.S.G. R1+Rg=R2=1.0k Cc=39pF5% C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage SFSKB4M30GF00-R1/SFSKB5M70GF00-R1 R1 (4) E1 E1 S.S.G. RF Voltmeter (1) Cc Rg (3) E2 (2) R1 C2 (4) R2 (1) Cc Rg R1 SFSKB2M80GF00-R1/SFSKB3M20FF00-R1 R2 SFSKB2M30GF00-R1/SFSKB3MZ0GF00-R1 RF Voltmeter (1) : Input (2) : Output (3) : Ground (4) : Terminal for external capacitor SFSKB4M80GF00-R1 R1 (1) (4) (2) (3) S.S.G. R1+Rg=R2=1.0k Cc=33pF5% C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage (1) : Input (2) : Output (3) : Ground (4) : Terminal for external capacitor S.S.G. R1+Rg=R2=1.0k Cc=15pF5% C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage E2 C2 R2 Cc RF Voltmeter E1 Rg E2 C2 R2 E1 Cc Rg 11 RF Voltmeter (1) : Input (2) : Output (3) : Ground (4) : Terminal for external capacitor (3) S.S.G. R1+Rg=R2=1.0k Cc=27pF5% C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage E2 (2) C2 (4) R2 (1) E1 Rg R1 Cc SFSKB5M20GF00-R1 RF Voltmeter (1) : Input (2) : Output (3) : Ground (4) : Terminal for external capacitor 39 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Frequency Characteristics SFSKB2M80GF00-R1 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFSKB2M30GF00-R1 30 40 50 60 70 1.300 30 40 50 60 1.800 2.300 2.800 70 1.800 3.300 2.300 Frequency (MHz) 0 0 10 10 20 20 30 40 50 60 2.700 3.200 3.700 70 2.800 4.200 3.300 5.800 6.200 6.700 SFSKB4M80GF00-R1 0 0 10 20 20 Attenuation (dB) Attenuation (dB) 3.800 Frequency (MHz) 30 40 50 30 40 50 60 3.800 4.300 4.800 70 3.800 5.300 4.300 Frequency (MHz) 4.800 Frequency (MHz) SFSKB5M20GF00-R1 SFSKB5M70GF00-R1 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) 5.300 60 60 30 40 50 60 30 40 50 60 4.700 5.200 Frequency (MHz) 40 4.800 50 10 70 4.200 4.300 40 SFSKB4M30GF00-R1 70 3.300 3.800 30 Frequency (MHz) 11 3.300 SFSKB3M80GF00-R1 Attenuation (dB) Attenuation (dB) SFSKB3M20FF00-R1 70 2.200 2.800 Frequency (MHz) 5.700 6.200 70 4.700 5.200 5.700 Frequency (MHz) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Frequency Characteristics (Spurious) SFSKB2M80GF00-R1 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFSKB2M30GF00-R1 30 40 50 60 70 30 40 50 60 0.300 1.300 2.300 3.300 70 4.300 0.800 1.800 Frequency (MHz) 0 0 10 10 20 20 30 40 50 60 1.200 2.200 3.200 4.200 70 5.200 1.800 2.800 3.800 Frequency (MHz) SFSKB4M80GF00-R1 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) 5.800 50 60 30 40 50 60 11 30 40 50 60 2.300 3.300 4.300 5.300 70 6.300 2.800 3.800 Frequency (MHz) 4.800 5.800 6.800 6.700 7.700 Frequency (MHz) SFSKB5M20GF00-R1 SFSKB5M70GF00-R1 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) 4.800 40 SFSKB4M30GF00-R1 30 40 50 60 70 4.800 30 Frequency (MHz) 70 3.800 SFSKB3M80GF00-R1 Attenuation (dB) Attenuation (dB) SFSKB3M20FF00-R1 70 2.800 Frequency (MHz) 30 40 50 60 3.200 4.200 5.200 Frequency (MHz) 6.200 7.200 70 3.700 4.700 5.700 Frequency (MHz) 41 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment Chip Type SFPKA Series 7.50.3 SFPKA series for AM use is one of the most recommendable intermediate filters, having such distinctive features as high selectivity, high stability and adjustment-free operation. Additionally, its easy matching with IC helps create an easy circuit design. MARKING EIAJ CODE 5.0 max. 0.90.1 2.00.3 1.50.3 1.50.3 2.00.3 Features Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) SFPKA450KH1A-R1 450.0 1.0kHz fn3.0 min. SFPKA450KG1A-R1 450.0 1.0kHz fn4.5 min. 1.60.3 Connection (1) : Input (2) : Ground (3) : Output (1) (2) (3) 1. The filters are mountable by automatic placers and can be reflow soldered and withstand washing. 2. The filters are wide bandwidth and high selectivity, so they are suitable for car radio and multi-band radio. Part Number 8.4 max. 7.00.3 3.00.3 (in mm) Selectivity (+) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element 40 min.[fn-9kHz] 40 min.[fn+9kHz] 6.0 max. 2000 4 40 min.[fn-10kHz] 40 min.[fn+10kHz] 6.0 max. 1500 4 Selectivity (-) (dB) Area of Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 6dB bandwidth. (fn) means nominal center frequency (450kHz). For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Land Pattern Dimensions Recommended IFT Type SFPKA Winding Specification S(3) 1.6 2.475 0.8 Item 6.95 2.0 12 (1)--(2) (2)--(3) (4)--(6) 60T 125T 28T (4)S (2) 1.1 0.925 2.0 2.0 0.9 1.55 7.45 (1) (in mm) (6) (Bottom view) No load Qu 40 Tuning Capacitance 180pF * Matching of CERAFILr SFPKA series with IFT is decided by the Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at about 40 because a Qu value which is too high (e.g.,90) may produce ripple in the waveform. It is recommended to match the impedance of |Z2| with that of the CERAFILr. Continued on the following page. 42 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Continued from the preceding page. Test Circuit R1 (3) (1) (2) RF Voltmeter Rg R2 E1 E2 S.S.G. 0dBm (1) : Input (2) : Ground (3) : Output Rg+R1=R2=Input/Output Impedance E1 : S.S.G. Output Voltage Frequency Characteristics 400 10 360 10 360 20 320 20 320 30 280 30 280 40 240 40 240 50 200 50 200 60 160 60 160 70 120 70 120 80 80 80 80 90 40 90 40 0 100 100 425 450 Frequency (kHz) 475 Attenuation (dB) 0 425 450 475 G.D.T. (sec.) SFPKA450KG1A-R1 400 G.D.T. (sec.) Attenuation (dB) SFPKA450KH1A-R1 0 0 Frequency (kHz) 12 43 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment Lead Type SFPLA/CFWLA Series 7.30.3 EIAJ CODE 2.70.3 (1) (3) SFPLA Series 0.60.1 1.20.5 Connection (1) : Input (2) : Ground (3) : Output 4.20.3 (2) 0.80.1 3.00.3 1.5 max. 0.150.05 0.30.1 SFPLA/CFWLA series for AM use is one of the most suitable intermediate filters, having such distinctive features as high selectivity, high stability, high attenuation, and adjustment-free operation. Additionally, its easy matching with IC helps create an easy circuit design. This is the most suitable for car-stereo and all band radio with high attenuation. 7.00.3 8.00.3 MARKING (in mm) 3.30.5 11.00.5 7.50.5 EIAJ CODE 3.50.5 0.15 2.90.3 0.80.1 (1) (5) Connection (1) : Input (2)(3)(4) : Ground (5) : Output (in mm) 2.00.3 Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Selectivity (-) (dB) Selectivity (+) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element SFPLA450KJ1A-B0 450.0 1.0kHz fn2.0 min. 40 min.[fn-7.5kHz] 40 min.[fn+7.5kHz] 6.0 max. 2000 4 SFPLA450KH1A-B0 450.0 1.0kHz fn3.0 min. 40 min.[fn-9kHz] 40 min.[fn+9kHz] 6.0 max. 2000 4 CFWLA450KJFA-B0 450.0 (fn) fn2.0 min. 50 min.[fn-7.5kHz] 50 min.[fn+7.5kHz] 7.0 max. 2000 6 CFWLA450KHFA-B0 450.0 (fn) fn3.0 min. 50 min.[fn-9kHz] 50 min.[fn+9kHz] 6.0 max. 2000 6 Part Number 13 (2) 4.30.3 1.350.5 2.30.5 (4) (3) 0.60.1 2.60.3 2.90.3 2.9-- 2.9 --0.3 1.20.5 CFWLA Series 1.5 max. 7.00.5 MARKING Area of Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 6dB bandwidth. (fn) means nominal center frequency (450kHz). For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Recommended IFT Test Circuit SFPLA/CFWLA Type Item 7x7mm IFT Winding Specification S(3) (1)--(2) (2)--(3) (4)--(6) 60T 125T 28T R1 (4)S Input Output Rg (2) (1) (6) RF R2 SSG (Bottom view) No load Qu 40 Tuning Capacitance 180pF * Matching of CERAFILr SFPLA/CFWLA series with IFT is decided by the Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at about 40 because a Qu value which is too high (e.g.,90) may produce ripple in the waveform. It is recommended to match the impedance of |Z2| with that of the CERAFILr. Voltmeter Ground Rg+R1 =R2 : Input/Output Impedance Continued on the following page. 44 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Continued from the preceding page. Frequency Characteristics IFT+CFWLA450KHFA-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) IFT+SFPLA450KH1A-B0 0 30 40 30 40 50 50 60 60 70 430 440 450 460 470 70 430 440 450 Frequency (kHz) Frequency (kHz) 460 470 Frequency Characteristics (Spurious) IFT+CFWLA450KHFA-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) IFT+SFPLA450KH1A-B0 0 30 40 50 30 40 50 60 60 70 70 80 0 1 2 3 4 5 6 Frequency (MHz) 7 8 9 10 80 0 1 2 3 4 5 6 Frequency (MHz) 7 8 9 10 13 45 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment For AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series 2.70.3 (2) 3.00.3 (1) (3) Connection (1) : Input (2) : Ground (3) : Output (in mm) 8.00.3 MARKING MARKING 2.30.5 14 (1) 2.00.3 0.60.1 2.70.3 Connection (1) : Input (2)(3)(4) : Ground (5) : Output Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) SFPLA450KG1A-B0 450.0 1.0kHz fn4.5 min. SFPLA450KF1A-B0 450.0 1.0kHz fn6.0 min. SFPLA450KE1A-B0 450.0 1.0kHz fn7.5 min. 40 min.[fn-15kHz] SFPLA450KD1A-B0 450.0 1.0kHz fn10.0 min. CFULA450KG1Y-B0 450.0 1.0kHz fn4.5 min. CFULA450KF1Y-B0 450.0 1.0kHz fn6.0 min. CFULA450KD1Y-B0 450.0 1.0kHz fn10.0 min. fn4.5 min. CFWLA450KF1Y-B0 450.0 1.0kHz fn6.0 min. CFULA Series 3.00.3 1.20.5 (1) (3) (in mm) Part Number CFWLA450KG1Y-B0 450.0 1.0kHz (2) 0.80.1 0.60.1 4.20.3 (2) (5) 4.30.3 1.350.5 (4) (3) 1.5 max. 0.150.05 2.60.3 2.90.3 2.9-- 2.9 --0.3 1.20.5 CFWLA Series 1.5 max. 3.50.5 0.15 2.90.3 0.80.1 7.30.3 EIAJ CODE 7.50.5 EIAJ CODE 7.00.5 11.00.5 7.00.3 3.30.5 0.30.1 SFPLA Series 0.60.1 1.20.5 4.20.3 0.150.05 0.80.1 0.30.1 7.30.3 EIAJ CODE 1.5 max. SFPLA/CFULA/CFWLA series for AM use is one of the most suitable intermediate filters, having such distinctive features as high selectivity, high stability, high attenuation, and adjustment-free operation. Additionally, its easy matching with IC helps create an easy circuit design. Especially, CFULA/CFWLA_Y series is the frequency fidelity in the high sound area of an AM stereo will be improved with wide band, flat group delay time characteristics. 7.00.3 8.00.3 MARKING Connection (1) : Input (2) : Ground (3) : Output 3.30.5 (in mm) Selectivity (-) (dB) Selectivity (+) (dB) Insertion Loss (dB) GDT 20sec. Bandwidth (kHz) 30 min.[fn-9kHz] 30 min.[fn+9kHz] 6.0 max. - 2000 4 6.0 max. - 2000 4 40 min.[fn+15kHz] 6.0 max. - 1500 4 40 min.[fn-20kHz] 40 min.[fn+20kHz] 4.0 max. - 1500 4 40 min.[fn-15kHz] 40 min.[fn+15kHz] 10.0 max. fn3 2000 4 9.0 max. fn4 2000 4 40 min.[fn-12.5kHz] 40 min.[fn+12.5kHz] 40 min.[fn-17.5kHz] 40 min.[fn+17.5kHz] Input/Output Impedance Element (ohm) 40 min.[fn-25kHz] 40 min.[fn+25kHz] 7.0 max. fn7 1500 4 50 min.[fn-15kHz] 50 min.[fn+15kHz] 11.0 max. fn4 2000 6 10.0 max. fn5 2000 6 50 min.[fn-17.5kHz] 50 min.[fn+17.5kHz] CFWLA450KD1Y-B0 450.0 1.0kHz fn10.0 min. 50 min.[fn-25kHz] 50 min.[fn+25kHz] 8.0 max. fn8 1500 6 CFWLA450KGFA-B0 450.0 (fn) fn4.5 min. 50 min.[fn-10kHz] 50 min.[fn+10kHz] 6.0 max. - 2000 6 CFWLA450KFFA-B0 450.0 (fn) fn6.0 min. 6.0 max. - 2000 6 CFWLA450KEFA-B0 450.0 (fn) fn7.5 min. 50 min.[fn-15kHz] 50 min.[fn+15kHz] 6.0 max. - 1500 6 CFWLA450KDFA-B0 450.0 (fn) fn10.0 min. 50 min.[fn-20kHz] 50 min.[fn+20kHz] 4.0 max. - 1500 6 50 min.[fn-12.5kHz] 50 min.[fn+12.5kHz] Area of Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 6dB bandwidth. (fn) means nominal center frequency (450kHz). For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 46 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Recommended IFT May.23,2011 Test Circuit SFPLA/CFULA/CFWLA Type Item 7x7mm IFT Winding Specification S(3) (1)--(2) (2)--(3) (4)--(6) 60T 125T 28T Input R1 (4)S Output Rg (2) (1) (6) RF R2 SSG (Bottom view) No load Qu 40 Tuning Capacitance 180pF Voltmeter Ground * Matching of CERAFILr SFPLA/CFULA/CFWLA series with IFT is decided by the Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at about 40 because a Qu value which is too high (e.g.,90) may produce ripple in the waveform. It is recommended to match the impedance of |Z2| with that of the CERAFILr. Rg+R1 =R2 : Input/Output Impedance Frequency Characteristics IFT+CFWLA450KFFA-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) IFT+SFPLA450KF1A-B0 0 30 40 50 30 40 50 60 60 70 440 450 460 70 430 470 440 Frequency (kHz) 460 470 IFT+CFWLA450KF1Y-B0 10 10 20 200 30 100 40 0 50 60 Attenuation (dB) 0 Group Delay Time (sec.) Attenuation (dB) IFT+CFULA450KF1Y-B0 0 70 430 450 Frequency (kHz) 20 200 30 100 40 0 50 Group Delay Time (sec.) 430 60 440 450 Frequency (kHz) 460 470 70 430 440 450 460 470 Frequency (kHz) 14 47 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. CERAFILr 455kHz SFp Series Temperature Characteristics Center Frequency (kHz) SFPLA450KH1A-B0 +1 Temperature (D) -20 0 20 40 0 20 40 60 80 0 -1 Insertion Los (dB) +1 0 60 80 Temperature (D) -20 3dB Bandwidth (kHz) -1 14 48 +1 Temperature (D) 20 0 -20 -1 0 40 60 80 P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 CERAFILr (Ceramic Trap) for Audio/Visual Equipment 4.5-6.5MHz Chip Type TPSKA Series SMD ceramic trap TPSKA_B is a small and thin SMD trap sealed with a metal cap. Recommended for LCD-TVs, and small and thin tuners. 7.90.2 3.00.1 1.80.2 Features 0.50.1 8.50.2 1. High attenuation and high performance group delay time 2. Small and thin package 3. Reflow-solderable 0.60.2 3.80.2 1.00.1 1.30.2 0.30.1 (1) : Input (2) : Ground (3) : Output 1.30.2 (1) (2) (3) (in mm) 2.50.2 2.50.2 Nominal Center Frequency (fn1) (MHz) Attenuation (at fn1) (dB) 30dB Attenuation BW (fn1) (kHz) TPSKA4M50B00-R3 4.500 35 min. 50 min. TPSKA5M50B00-R3 5.500 35 min. 70 min. TPSKA6M00B00-R3 6.000 35 min. 70 min. TPSKA6M50B00-R3 6.500 35 min. 70 min. Part Number For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Land Pattern Dimensions Test Circuit L 1.0 1.0 1.5 1.0 R1 1.5 Rg 4.8 50 R2 RF Voltmeter S.S.G. Rg=50 R1=330 R2=1.0k L=15H (in mm) Frequency Characteristics TPSKA5M50B00-R3 0 0 10 10 Attenuation (dB) Attenuation (dB) TPSKA4M50B00-R3 20 30 40 20 30 40 50 50 60 60 70 15 70 4.0 4.1 4.2 4.3 4.4 4.5 4.6 Frequency (MHz) 4.7 4.8 4.9 5.0 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 Frequency (MHz) Continued on the following page. 49 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 Continued from the preceding page. Frequency Characteristics TPSKA6M50B00-R3 0 0 10 10 Attenuation (dB) Attenuation (dB) TPSKA6M00B00-R3 20 30 40 20 30 40 50 50 60 60 70 70 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.0 6.1 6.2 6.3 Frequency (MHz) 6.4 6.5 6.6 6.7 6.8 6.9 7.0 Frequency (MHz) Frequency Characteristics (Spurious) 700 0 1000 600 10 800 20 500 20 600 30 400 30 400 40 300 50 200 Attenuation (dB) 0 10 40 200 50 0 60 100 60 70 0 70 80 80 1.0 2.0 3.0 Frequency (MHz) 4.0 5.0 0 1.0 2.0 7.0 8.0 9.0 10.0 1000 0 1000 800 10 800 20 600 20 600 30 400 30 400 40 200 50 0 Attenuation (dB) 0 10 40 200 50 0 60 60 70 70 80 80 0 50 4.0 5.0 6.0 Frequency (MHz) TPSKA6M50B00-R3 G.D.T. (nsec.) Attenuation (dB) TPSKA6M00B00-R3 3.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 G.D.T. (nsec.) 0 15 G.D.T. (nsec.) TPSKA5M50B00-R3 G.D.T. (nsec) Attenuation (dB) TPSKA4M50B00-R3 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 CERAFILr (Ceramic Discriminator) for Audio/Visual Equipment 0.30.2 10.7MHz Ultra Thin Chip Type CDSCB Series 0.20.2 1.4 max. 4.50.1 2.00.1 CDSCB10M7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in a wide bandwidth. They have 1.0mm max. thickness and small mounting area (4.5x2.0mm). 0.40.05 1.0 max. 4.1 max. 0.4(ref.) 0.4(ref.) 0.80.1 0.80.1 Features 1. Compact and high reliability and recommended for automotive applications. 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demodulation characteristics can be obtained without adjustment. 4. Stable temperature characteristics 5. Available lead (Pb) free solder reflow. 1.50.1 1.50.1 (in mm) Part Number Center Frequency (fo) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output (mV) Distortion (%) S Curve (mV) IC CDSCB10M7GA105A-R0 10.700 30kHz 220 min. 110 min. 1.5 max. - TEA5757HL CDSCB10M7GA113-R0 10.700 30kHz 300 min. 110 min. 1.0 max. - TA2154FN CDSCB10M7GA119-R0 10.700 30kHz 500 min. 75 min. 1.0 max. - TRF6901 CDSCB10M7GA121-R0 10.700 30kHz 390 min. 80 min. 1.0 max. - LV23100V CDSCB10M7GA135-R0 10.700 30kHz 155 min. 75 min. - - TH71101 CDSCB10M7GA136-R0 10.700 30kHz 140 min. 120 min. - - TH7122 CDSCB10M7GF072-R0 10.700 (fn) fn150 min. 130 min. 2.0 max. - TA31161 CDSCB10M7GF107S-R0 10.700 (fn) fn80 min. 52 min. 3.0 max. - TA31272FN CDSCB10M7GF109-R0 10.700 (fn) fn100 min. 170 min. 3.0 max. - TK14588V CDSCB10M7GF123-R0 10.700 (fn) - - - 900 min. TA31275FN CDSCB10M7GF123S-R0 10.700 (fn) - - - 900 min. TA31275FN CDSCB10M7GF126-R0 10.700 (fn) - - - 400 min. NJM2295AV (fn) means nominal center frequency (10.700MHz). For safety purposes, avoid applying a direct current between the terminals. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step D 10.64MHz30kHz 10.650MHz25kHz B 10.67MHz30kHz 10.675MHz25kHz A 10.70MHz30kHz 10.700MHz25kHz C 10.73MHz30kHz 10.725MHz25kHz E 10.76MHz30kHz 10.750MHz25kHz Z Combination A, B, C, D, E M Combination A, B, C 16 Continued on the following page. 51 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Continued from the preceding page. Standard Land Pattern Dimensions 2.6 3.0 1.0 2.0 1.0 (in mm) Test Circuit CDSCB10M7GA105A-R0 CDSCB10M7GA113-R0 Vcc (1.2V) 35 3 34 4 33 5 32 6 100k 28 0.01 27 26 25 24 23 22 21 20 19 18 17 16 11 12 13 14 15 TA2154FN (TOSHIBA) 1 2 3 4 5 6 7 8 9 10 + X 30 8 29 9 28 10 27 11 26 12 DC OUT 29 31 TEA5757HL (PHILIPS) 7 30 S.S.G. 2.2 680p 2 0.01 + 100 0.01 10 + 48 47 46 45 44 43 42 41 40 39 38 37 0.1 1 36 0.01 0.1 0.01 Vcc (3.0V) D.C. OUT AF OUT X : CDSCB10M7GA113-R0 Unit C : F R: S.S.G. 10 25 0.47 0.1 + X AFC (n) 0.22 150 AF OUT X : CDSCB10M7GA105A-R0 Unit C : F R: CDSCB10M7GA119-R0 CDSCB10M7GA121-R0 Vcc (3.0V) IF Input 10p LV23100V (SANYO) 1 34 32 6 TRF6901 31 7 (TEXAS INSTRUMENTS) 30 8 29 9 28 100p 10 27 11 26 12 25 13 14 15 16 17 18 19 20 21 22 23 24 0.01 5 6 7 8 9 10 11 12 13 14 15 16 17 18 10k 10 1000p 33 5 4 + 0.047 + 47p + 0.47 0.01 3.3k 0.1 + 1 0.22 0.47 + S.G. 100p 10k + PIC16F84 (Control IC) PIC16F84 2 3 4 5 1k 2.2 6 7 1 8 2 3 4 5 6 7 8 9 9 10k + 10k 18 17 16 15 14 13 12 11 10 18 17 16 15 14 13 12 11 10 1 100p 3 3 X 35 2 X 1 2 4 16 10p 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 48 47 46 45 44 43 42 41 40 39 38 37 36 1 10k 0.01 82p 10 0.047 4.7 0.015 22+ 0.047 120p Vcc (3.2V) 0.01 220k 15p 75 0.01 D.C. Output AF Output 68p 0.01 0.01 AF Output 100 4.7 AFC (p) 330p 0.1 13 14 15 16 17 18 19 20 21 22 23 24 0.1 X : CDSCB10M7GA119-R0 Unit C : F R: L:H 1k X : CDSCB10M7GA121-R0 2.2 + 10k 0.1 Unit C : F R: Continued on the following page. 52 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 Continued from the preceding page. Test Circuit CDSCB10M7GA135-R0 CDSCB10M7GA136-R0 Vcc (5.0V) Vcc (5.0V) AF-OUT FKS-OUT 330p 0.1 0.1 24 23 22 21 20 19 18 17 25 16 26 100p 1000p 0.01 0.01 330k 15 27 14 TH7122 [Internal AFC Enabled] (MELEXIS) 28 220k 29 12 30 0.01 24 23 22 21 20 19 18 25 15 27 14 10 32 16 26 11 31 17 2 3 0.01 4 5 6 7 8 0.1 29 0.01 330p AF-OUT 1000p TH71101, TH71102, TH71111 or TH71112 (MELEXIS) FKS-OUT 330p 0.01 28 0.01 9 1 12p C.D. 330p 13 330p 13 100k 0.033 12 S.G. 1000p 30 11 31 10 C.D. 3.3k 0.01 330p 0.01 32 9 1 2 3 4 5 6 7 100k 8 18 0.01 17 16 1 2 13 3 4 5 6 12 11 7 1k X: CDSCB10M7GA135-R0 330p 100p 14 10 PIC16F84 (Control IC) S.G. + 10 15 8 9 10k X: CDSCB10M7GA136-R0 + 2.2 Unit C: F R: CDSCB10M7GF072-R0 Unit C: F R: 0.1 CDSCB10M7GF109-R0 Vcc (3V) 0.01 1.2 Vcc (3V) 4.7 R X X 0.01 D.C. OUT 10p 13 12 11 10 8p 12k 9 51k 5 6 0.01 7 8 16 X : CDSCB10M7GF072-R0 R : 820 Unit C : F R: L:H + 33 0.01 14 13 12 11 10 9 7 8 TK14588V (TOKO) 1 2 3 4 5 51 IF IN 15 0.01 4 0.01 3 0.01 2 0.01 1 0.01 14 TA31161 (TOSHIBA) 6 + S.S.G. 4.7 15 0.01 16 AF OUT 0.01 1000p X : CDSCB10M7GF109-R0 R : 820 Unit C : F R: L:H CDSCB10M7GF123-R0 CDSCB10M7GF126-R0 Vcc (5.0V) 22 1 2 3 21 20 19 0.01 0.01 18 17 16 20 15 14 13 8 9 10 11 12 16 15 14 1 2 3 4 5 6 7 0.01 0.1 7 17 1.8k 6 0.01 5 18 13 12 8 9 11 NJM2295AV (JRC) TA31275FN (TOSHIBA) 4 19 + 10 23 0.01 1000p 3300p 24 DC-OUT + DC-OUT 0.01 10 0.01 AF OUT 100p Vcc (5.0V) 10 8p S.S.G. X : CDSCB10M7GF123-R0 Unit C: F R: 180 10+ 0.01 10+ 0.1 0.01 0.1 C.D. 0.1 AF OUT R 0.01 X : CDSCB10M7GF126-R0 S.G. Unit C: F R: 53 16 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Recovered Audio Curve CDSCB10M7GA105A-R0 1000 CDSCB10M7GA113-R0 100 1000 10 100 100 AF Output 1 1 10 Distortion 10 1 1 0.1 T.H.D. (%) 10 T.H.D. (%) AF Output Voltage (mV) Distortion AF Output Voltage (mV) AF Output 100 0.1 Input = 100dB fdev. = 75kHz fmod. = 1kHz Vcc = 3.0V 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 10.3 10.4 10.5 10.6 Frequency (MHz) CDSCB10M7GA119-R0 1000 10.8 10.9 11.0 11.1 CDSCB10M7GA121-R0 100 1000 10 100 100 AF Output 1 1 T.H.D. (%) Distortion 10 AF Output Voltage (mV) AF Output 100 AF Output Voltage (mV) 10.7 Frequency (MHz) 10 Distortion 10 1 1 0.1 0.1 Input = 100dB fdev. = 75kHz fmod. = 1kHz Vcc = 3.2V Input = 100dB fdev. = 60kHz fmod. = 1kHz Vcc = 3.0V 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 10.3 11.1 10.4 10.6 10.7 10.8 10.9 11.0 11.1 CDSCB10M7GA136-R0 1000 100 100 AF Output Voltage (mV) AF Output Voltage (mV) CDSCB10M7GA135-R0 1000 10 1 0.1 10.4 10.5 Frequency (MHz) Frequency (MHz) 16 T.H.D. (%) 10.3 Input = 100dB fdev. = 75kHz fmod. = 1kHz Vcc = 1.2V 10 1 Input = 100dB fdev. = 50kHz fmod. = 1kHz Vcc = 5.0V 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 0.1 10.4 Input = 100dB fdev. = 50kHz fmod. = 1kHz Vcc = 5.0V 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz) Continued on the following page. 54 P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Continued from the preceding page. Recovered Audio Curve CDSCB10M7GF109-R0 100 100 10 100 10 10 1 10 1 1 0.1 10.3 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 11.1 0.1 1 Input = 100dB fdev. = 80kHz fmod. = 1kHz Vcc = 3.0V T.H.D. (%) 1000 AF Output Voltage (mV) 100 T.H.D. (%) AF Output Voltage (mV) CDSCB10M7GF072-R0 1000 10.3 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 Input = 100dB fdev. = 64kHz fmod. = 1kHz Vcc = 3.0V 11.1 S Curve CDSCB10M7GF123-R0 CDSCB10M7GF126-R0 2.5 4.0 2.0 3.0 Volt (V) Volt (V) 1.5 1.0 2.0 0.5 0.0 10.3 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 11.1 1.0 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 Frequency (MHz) 16 55 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 CERAFILr (Ceramic Discriminator) for Audio/Visual Equipment 10.7MHz Standard Lead Type CDALF Series 8.01.0 MARKING Freq. Rank (Color Dot) EIAJ CODE 5.01.0 CDALF10M7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in wide bandwidths. As part of the environment protection activity, solder for terminal plating and terminal-element connection inside of ceramic filter contain no lead (Pb). 5.01.0 0.40.1 0.650.1 0.30.1 0.50.1 3.01.0 Features 5.00.2 CDALF10M7G_ Series (in mm) 1. Compact and excellent mechanical strength 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demodulation characteristics can be obtained without adjustment. 4. Stable temperature characteristics 5. Recommended combination: ceramic discriminator CDALF10M7 series and CERAFILr SFELF10M7 series of the same frequency rank. 8.01.0 EIAJ CODE 5.01.0 MARKING Freq. Rank (Color Dot) 0.650.1 5.00.2 3.01.0 0.30.1 0.50.1 5.01.0 0.40.1 CDALF10M7C_ Series (in mm) Center Frequency (fo) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output (mV) Distortion (%) CDALF10M7GA016-B0 10.700 30kHz 300 min. within 60 to 90mV 0.9 max. TA8122F CDALF10M7GA018-B0 10.700 30kHz 300 min. within 60 to 90mV 0.9 max. TA8132N CDALF10M7GA046-B0 10.700 30kHz 330 min. 280 min. 1.0 max. LA1832 CDALF10M7GA048-B0 10.700 30kHz 400 min. 700 min. 1.0 max. LA1835 CDALF10M7GA092-B0 10.700 30kHz 300 min. 60 min. 1.0 max. TA2132P CDALF10M7CA005A-B0 10.700 30kHz 100 min. 600 min. 6.0 max. LA7770 CDALF10M7CA040-B0 10.700 30kHz 130 min. 40 min. 0.7 max. TEA5710 Part Number For safety purposes, avoid applying a direct current between the terminals. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. CDALF10M7GA018-B0: Color dot is different from standard series. Standard Center Frequency Rank Code 17 56 CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C IC !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Test Circuit CDALF10M7GA018-B0 Vcc 3V CDALF10M7GA018 1k DC out AF out 2.2 2.5 270 DC Out AF Out 330p 1k SFELF10M7DF00 + 0.033 330p 0.022 24k 0.033 + 0.1 VCC +3V 24 23 22 21 20 19 18 17 16 15 14 13 TA8122F (TOSHIBA) 0.1 1F in 24k CDALF10M7GA016-B0 24 23 22 21 20 19 18 17 16 15 14 13 3 4 5 6 7 8 9 10 11 12 TA8132N (TOSHIBA) 0.022 2 + 22 1 CDALF10M7GA016 1 2 3 4 5 6 7 8 9 10 11 12 22 SFELF10M7DF00 + 0.022 Unit R: C:F 270 0.022 IF in Unit R: C:F Vcc 3V CDALF10M7GA046-B0 CDALF10M7GA048-B0 AF OUT Vt CSBLA456KE2ZF15 CSBLA456KE2ZF15 0.01 + + 1 + 3.3 24 23 22 21 20 19 LA1832 6.8k 1 2 3 4 5 18 17 16 15 14 7 8 9 10 11 270 + 10 3.3 + 300 75 + REG L. P. F. 30 29 28 27 26 1 2 3 4 5 25 24 Rch Lch 10 10 + + 23 22 21 20 19 18 17 16 11 12 13 14 15 LA1835 (SANYO) 1 0.047 L. P. F. 33n + 1 15k 5k 12 3k 2.2 CDALF10M7GA046 75 IF-IN AFC 47n 1 13 (SANYO) 6 300 0.047 33n 1500p 0.01 + 0.047 0.047 6 100 Unit R: C:F 7 8 9 1 1k 1k 47n 10 10 IF-IN 20k 3k + 10 + + 0.47 Unit R: C:F CDALF10M7GA048 10 VCC(7V) REG. Vcc (5V) CDALF10M7GA092-B0 CDALF10M7CA005A-B0 14 13 12 11 10 0.1 2k 0.1 10k 5.6k 10k 2k Demod.OUT 10k CDALF10M7CA005A 15 DATA OUT 0.01 0.033 20k 330p 16 Vcc(3.0V) + DC Bias +5.2V DC Bias +5V CDALF10M7GA092 20k AF OUT + 470p 2.2 470p DC OUT 4.7 220p 20 19 1 2 18 17 16 15 14 13 12 11 9 10 9 IC : LA7770 (SANYO) TA2132P(TOSHIBA) 3 4 5 6 7 8 5p 50 8 270 0.01 Vcc=12V + - 0.01 7 0.01 6 0.01 5 0.01 4 + 33 3 0.022p 2 4.7 1 1000p AFC 0.047 510 5.6k 1200p + 22 IF IN Unit R: C:F IF-IN Unit R: C:F CDALF10M7CA040-B0 VCC (3V) + 0.01 100 + AF-OUT 100 10 + 0.01 + 1 DC-OUT 24 23 22 21 20 19 18 TEA5710 1 2 3 4 5 0.22 6 17 16 15 14 13 10 11 12 (PHILIPS) 7 8 9 17 0.01 280 CDALF10M7CA040 0.22 50 S.S.G. Unit R: C:F 57 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Frequency Characteristics CDALF10M7GA016-B0 10 1000 Distortion (%) AF Output 1 10 Distortion 10 AF Output 100 10 1 Distortion 0.1 1 100 Distortion (%) 100 CDALF10M7GA018-B0 Recovered AF Output Voltage (mV) 100 Recovered AF Output Voltage (mV) 1000 1 0.1 Input signal conditions Input Level Mod. Freq. Freq.Dev. 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 Input signal conditions 80dB 1000Hz 22.5kHz Input Level 80dB Mod. Freq. 1000Hz Freq. Dev. 22.5kHz 11.0 10.4 10.5 CDALF10M7GA046-B0 1000 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 CDALF10M7GA048-B0 100 100 1000 10 100 10 10 1 AF Output 1 10 0.1 1 10.4 10.5 10.6 10.7 10.8 10.9 Distortion 1 0.1 Input signal conditions Input signal conditions Input Level 112dB Mod. Freq. 1000Hz Freq. Dev. 75kHz Input Level Mod. Freq. Freq.Dev. 10.4 11.0 10.5 Frequency (MHz) CDALF10M7GA092-B0 1000 Distortion (%) Recovered AF Output Voltage (mV) Distortion Distortion (%) Recovered AF Output Voltage (mV) AF Output 100 10.6 10.7 10.8 Frequency (MHz) 10.9 112dB 1000Hz 75kHz 11.0 CDALF10M7CA005A-B0 5000 100 500 AF Output 100 10 1 Distortion 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 100 10 1 10 0.1 1 Distortion Distortion (%) AF Output Distortion (%) Recovered AF Output Voltage (mV) 17 Recovered AF Output Voltage (mV) 1000 10 100 Input signal conditions Input signal conditions Input Level 100dB Input Level Mod.Freq. Freq.Dev. Mod. Freq. 1000Hz Freq. Dev. 75kHz 80dB 1000Hz 22.5kHz 10.6 10.7 10.8 Frequency (MHz) Continued on the following page. 58 P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Continued from the preceding page. Frequency Characteristics CDALF10M7CA040-B0 100 100 10 AF Output Distortion 10 1 1 0.1 Distortion (%) Recovered AF Output Voltage (mV) 1000 Input signal conditions Input Level 100dB Mod. Freq. 1000Hz Freq. Dev. 22.5kHz 10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz) 17 59 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Ceramic Discriminator 10.7MHz Applied IC Reference Table Please see the following table to reference applied IC. If you cannot find the IC part number you are seeking, please contact our sales representative. ex. : CDALF10M7GA016-B0 Suffix Number CDSCB10M7GA105A-R0 Suffix Number IC Manufacturer ATMEL INFINEON Panasonic Freescale Renesas NXP IC Part Number Suffix Number U4313B 081 U4490B IC Manufacturer IC Part Number Suffix Number TK14570L 122 034V TK14583V 112 TDA1576T 051 TK14588V 109 TDA6160X 038 TA2003 031 AN7004 011 TA2007 033 AN7232 053 TA2008A / AN 045 MC13156 049 TA2022 050 MC13158 073 TA2057 057 PC1391M 056 TA2099N 082 NE604 020 TA2104AFN 080 SA605 042 TA2104F 080A 077 TOKO TOSHIBA SA626 047 TA2111N / F / FN SA636DK 096 TA2132 092 SA639 085 TA2132BP 092D TDA1596T 120 TA2142FN 102 TEA5710 040 TA2149AN 100A TEA5757HL 105A TA2149N 100 TEA5762 / 5757 061 TA2154FN 113 UAA3220TS 098 TA2159F 116 BA1448 060 TA31161 072 BA4230AF 005 TA31275FN 123 BA4234L 004 TA7303P 008 SAMSUNG S1A0903 118A TA7640AP 006 SANYO LA1225M 108A TA8122AN / AF 016 LA1814M 115 TA8132AN / AF 018 TB2132FN 128 ROHM SONY 17 T. I. 60 LA1823 101 LA1827M 083 LA1831 043 LA1832 / M 046 LA1833 086 LA1835 / M 048 LA1838 / M 079 LA7770 023 LV23000M 114 LV23100V 121 CX1691M 078 CX-20029 001 CXA1111 093 CXA1238 027 CXA1238N 027N CX1343M 032 CXA1376AM 054 CXA1538M / N / S 069 CXA1611 075 CX3067M 076 TRF6901 119 P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Temperature (C) CERAFILr 10.7MHz Chip Type SFECF Series Soldering and Mounting Peak (260C max.) 260 230 Pre-heating (150-180C) 100 Heating (230C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3505C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. (3) Condition for Placement Machines The component is recommended with placement machines with employ optical placement capabilities. The component might be resulted in damage by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. (4) Others (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to be lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick up nozzle are worn, the load is applied to the components while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be done to prevent the electrode erosion. (f) Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. [Component Direction] Put the component lateral to the direction in which stress acts. [Component Layout Close to Board] Perforation A B Slit C Susceptibility to stress is in the order of : A>C>B 17 Continued on the following page. 61 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice Continued from the preceding page. 2. Wash Do not clean or wash the component as it is not hermetically sealed. 3. Coating In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. Strage and Operating Conditions 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, may be degraded in solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Rating The component may be damaged if excessive mechanical stress is applied. Handling 17 1. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miss-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. The components, packed in the moisture proof bag (dry pack), are sensitive to moisture. The following treatment is required before applying re-flow soldering. To avoid reliability degradation caused by thermal stress. When unpacked, store the component in an atmosphere of re-flow 30C and below 60%R.H., and solder within 1 week. 62 3. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Temperature (C) CERAFILr 10.7MHz Chip Type SFECV/SFECK Series Soldering and Mounting Peak (240C max.) 240 230 Pre-heating (150-180C) 100 Heating (230C) Gradual Cooling 30 sec. min. 60-120 sec. 30 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3505C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. (3) Condition for Placement Machines The component is recommended with placement machines with employ optical placement capabilities. The component might be resulted in damage by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. (4) Others (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to be lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick up nozzle are worn, the load is applied to the components while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be done to prevent the electrode erosion. (f) Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. [Component Direction] Put the component lateral to the direction in which stress acts. [Component Layout Close to Board] Perforation A B Slit C Susceptibility to stress is in the order of : A>C>B 17 Continued on the following page. 63 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice Continued from the preceding page. 2. Wash Do not clean or wash the component as it is not hermetically sealed. 3. Coating In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. Strage and Operating Conditions 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, may be degraded in solderability due to the storage in a chemical atmosphere. Rating The component may be damaged if excessive mechanical stress is applied. Handling 1. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miss-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 17 64 (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice CERAFILr 10.7MHz Lead Type SFELF/SFELG/SFVLF/SFKLF Series Soldering and Mounting The component cannot withstand washing. Strage and Operating Conditions 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, may be degraded in solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Rating The component may be damaged if excessive mechanical stress is applied. Handling 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. All kinds of re-flow soldering must not be applied on the component. 3. Do not clean or wash the component as it is not hermetically sealed. 4. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 5. In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 6. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 7. For safety purposes, avoid applying a direct current between the terminals. 17 65 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Notice 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Temperature (C) CERAFILr 4.5-6.5MHz Chip Type SFSKA Series Soldering and Mounting Peak (260C max.) 260 230 Pre-heating (150-180C) 100 Heating (230C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3505C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. (3) Condition for Placement Machines The component is recommended with placement machines with employ optical placement capabilities. The component might be resulted in damage by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. (4) Others (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremly careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick up nozzle are worn, the load is applied to the components while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. [Component Direction] Put the component lateral to the direction in which stress acts. [Component Layout Close to Board] Perforation A Susceptibility to stress is in the order of : A>C>B B Slit C 17 2. Wash Do not clean or wash the component as it is not hermetically sealed. Continued on the following page. 66 P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice Continued from the preceding page. 3. Coating In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. Strage and Operating Conditions 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, may be degraded in solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Rating The component may be damaged if excessive mechanical stress is applied. Handling 1. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 17 67 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Notice 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Temperature (C) CERAFILr 2.3-5.7MHz Chip Type SFSKB Series Soldering and Mounting Peak (260C max.) 260 200 Pre-heating (150-170C) 100 Heating (200C) Gradual Cooling 30 sec. min. 60-120 sec. 60 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3505C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. (3) Condition for Placement Machines The component is recommended with placement machines with employ optical placement capabilities. The component might be resulted in damage by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. 17 (4) Others (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to be lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick up nozzle are worn, the load is applied to the components while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be done to prevent the electrode erosion. (f) Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. [Component Direction] Put the component laterally to the direction in which stress acts. [Component Layout Close to Board] Perforation A Susceptibility to stress is in the order of : A>C>B B Slit C Continued on the following page. 68 P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice Continued from the preceding page. 2. Wash Do not clean or wash the component as it is not hermetically sealed. 3. Coating In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. Strage and Operating Conditions 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, may be degraded in solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Rating The component may be damaged if excessive mechanical stress is applied. Handling 1. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miss-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 17 69 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Notice CERAFILr 455kHz Chip Type SFPKA Series Soldering and Mounting 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (260C max.) Temperature (C) 260 230 Heating (230C) Pre-heating 100 (150-180C) 30 sec. min. 60-120 sec. Gradual Cooling 40 sec. max. 120 sec. min. (2) Soldering Iron Electrode is directly soldered with the tip of soldering iron at +3505C for 3.00.5 seconds. (3) Others Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 2. Wash (1) Cleaning Solvent CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA), Water (Demineralized Water), Cleaning Water Solution (Cleanthrough-750H, Pine Alpha 100S), Silicon (Technocare FRW) (2) Cleaning Conditions * Immersion Wash 2 minutes max. in above solvent at +60C max. * Shower or Rinse Wash 2 minutes max. in above solvent at +60C max. (3) Notice * When components are immersed in solvent, be sure to maintain the temperature of components below the temperature of solvent. * Please do not use ultrasonic cleaning. * Total washing time should be within 4 minutes. * Please ensure the component is thoroughly evaluated in your application circuit. * Please do not use chlorine, petroleum and alkali cleaning solvent. * If you plan to use any other types of solvents, please consult with Murata or Murata representative prior to using. 17 3. Coating In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. Continued on the following page. 70 P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice Continued from the preceding page. Strage and Operating Conditions 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, may be degraded in solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Rating The component may be damaged if excessive mechanical stress is applied. Handling 1. In the case that the component is cleaned, confirm no reliability degradation is created. 2. The components, packed in the moisture-proof bag (dry pack), are sensitive to moisture. The following treatment is required before applying re-flow soldering, to avoid package cracks or reliability degradation caused by thermal stress. When unpacked, store the component in an atmosphere of below 25C and below 65%R.H., and solder within 48 hours. 3. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 17 71 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice CERAFILr 455kHz Lead Type SFPLA/CFWLA/CFULA Series Soldering and Mounting The component cannot withstand washing. Strage and Operating Conditions 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, may be degraded in solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Rating The component may be damaged if excessive mechanical stress is applied. Handling 1. Do not use this product with bend. The component may be damaged if excessive mechanical stress is applied to it mounted on the printed circuit board. 2. All kinds of re-flow soldering must not be applied on the component. 3. Do not clean or wash the component as it is not hermetically sealed. 4. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 17 72 5. Conformal coating of the component is not acceptable due to non sealed construction. 6. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 7. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Temperature (C) Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series Soldering and Mounting Peak (260C max.) 260 230 Pre-heating (150-180C) 100 Heating (230C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3505C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. (3) Condition for Placement Machines The component is recommended with placement machines with employ optical placement capabilities. The component might be resulted in damage by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. (4) Others (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremly careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick up nozzle are worn, the load is applied to the components while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. [Component Direction] Put the component lateral to the direction in which stress acts. [Component Layout Close to Board] Perforation A Susceptibility to stress is in the order of : A>C>B B Slit C 17 2. Wash Do not clean or wash the component as it is not hermetically sealed. Continued on the following page. 73 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice Continued from the preceding page. 3. Coating In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. Strage and Operating Conditions 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, may be degraded in solderability due to the storage in a chemical atmosphere. Rating The component may be damaged if excessive mechanical stress is applied. Handling 1. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 17 74 (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Temperature (C) Ceramic Discriminator 10.7MHz Chip Type CDSCB Series Soldering and Mounting Peak (260C max.) 260 230 Pre-heating (150-180C) 100 Heating (230C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3005C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. (3) Condition for Placement Machines The component is recommended with placement machines with employ optical placement capabilities. The component might be resulted in damage by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. (4) Others (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to be lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick up nozzle are worn, the load is applied to the components while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be done to prevent the electrode erosion. [Component Direction] Put the component laterally to the direction in which stress acts. [Component Layout Close to Board] Perforation B A Slit C Susceptibility to stress is in the order of : A>C>B 17 Continued on the following page. 75 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice Continued from the preceding page. 2. Wash Do not clean or wash the component as it is not hermetically sealed. 3. Coating In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. Strage and Operating Conditions 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, may be degraded in solderability due to the storage in a chemical atmosphere. Rating The component may be damaged if excessive mechanical stress is applied. Handling 1. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miss-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. For safety purposes, avoid applying a direct current between the terminals. 17 76 (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Notice Ceramic Discriminator 10.7MHz Lead Type CDALF Series Soldering and Mounting The component cannot withstand washing. Strage and Operating Conditions 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, may be degraded in solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Rating The component may be damaged if excessive mechanical stress is applied. Handling 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. All kinds of re-flow soldering must not be applied on the component. 3. Do not clean or wash the component as it is not hermetically sealed. 4. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 5. In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 6. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 7. For safety purposes, avoid applying a direct current between the terminals. 17 77 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 Packaging Minimum Quantity Taping Ammo Pack Bulk SFELF 1,500 500 SFELG 1,500 500 SFKLF 1,500 500 SFVLF 1,000 500 o330mm o180mm Magazine Box 50 150 50 200 CERAFILr<10.7MHz> SFECF 2,000 SFECV/SFECK 2,000 CERAFILr<2.3-6.5MHz> SFSKA 3,000 SFSKB 3,000 CERAFILr<455kHz> CFULA 200 CFWLA SFPKA 1,000 SFPLA Ceramic Traps<3.5-6.5MHz> TPSKA 3,000 Ceramic Discriminators<10.7MHz> CDALF 1,500 CDSCB 500 2,000 CERAFILr 10.7MHz Chip Type SFECF Series Dimensions of Carrier Tape Dimensions of Reel Cover film 10 max. (3) 3 max. Leader Cover film Components Empty 240 to 280 400 to 560 180 +0 -1.5 o13.00.5 60 +1.0 -0 12.00.2 5.50.05 Empty 2.00.5 4.10.1 Peeling strength (0.1 to 0.7N) +0.1 3.35 -0.05 (0.05) 4.00.1 0.30.05 4.10.1 Chip filter 1.840.1 o1.550.05 2.00.05 Trailer 160 to 190 1.750.1 4.00.1 17.01.0 13.0 +1.0 -0 User direction of feed * Part number marked side is always facing upside. ( ) : Reference (in mm) Continued on the following page. 17 78 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Packaging Continued from the preceding page. CERAFILr 10.7MHz Chip Type SFECV/SFECK Series Dimensions of carrier tape +0 Empty 240-280 400-560 180 -1.5 o13.00.5 +1.0 Leader Cover film Empty Components 60 -0 4.0T0.1 5.5T0.05 1.75T0.1 Trailer 160-190 12.0T0.2 2.0T0.05 7.3T0.01 W0.1 o1.5 Y0.0 Dimension of reel 1.9T0.1 (3) W0.1 Chip filter Peeling strength 0.1 to 0.7N Cover film 10 max. 1.7 Y0.05 3.0T0.1 0.3T0.05 2.00.5 4.0T0.1 +1.0 13.0 -0 17.01.0 User direction of feed * Part number marked side is always facing up. ( ) : Reference (in mm) Continued on the following page. 17 79 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 10.7MHz Lead Type SF_LF Series P2 dh dh P H0 W1 W0 W L2 L1 W2 dS1 F1 F1 P1 D0 F t P0 Item Code Dimensions Tolerance Lead length under the hold down tape L1 Length of cut off L2 2.0 max. Pitch of components P 12.7 0.5 Pitch of sprocket hole (1) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 Lead spacing (1) F 5.0 Lead spacing (2) F1 2.5 0.5 +0.5 -0.2 0.2 Slant to the forward or backward dh 0 1.0 Slant to the left or right dS1 0 1.0 0.5 3.0 min. - Width of carrier tape W 18.0 Width of hold down tape W0 6.0 min. Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 0.6 0.2 254.0 1.5 Total tape thickness Pitch of sprocket hole (2) t P020 Remarks To distinguish the direction - Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) Continued on the following page. 17 80 P50E.pdf May.23,2011 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 Packaging Continued from the preceding page. CERAFILr 4.5-6.5MHz Chip Type SFSKA Series Chip filter (3) Leader Cover film 16.00.2 Trailer 160 to 190 Empty Components 2.20.5 Empty 240 to 280 min. 400 to 560 801 3302 4.30.1 8.00.1 10 max. +0.1 o1.5 -0.0 2.1-0.05 +0.1 Peeling strength (0.1 to 0.7N) Cover film 0.30.05 9.00.1 7.50.1 2.00.1 4.00.1 o1.5 -0.0 2.30.1 +0.1 Dimensions of Reel 1.750.1 Dimensions of Carrier Tape o13.00.2 17.50.5 21.51.0 User direction of feed * Part number marked side is always facing upside. (in mm) CERAFILr 2.3-5.7MHz Chip Type SFSKB Series Empty Components 8.00.1 1.60.1 2.20.2 o13.00.2 Cover Film 4.20.1 Empty 240 to 280 400 to 560 (o80) (o330) 5.60.1 Leader Cover Film Trailer 160 to 190 12.00.2 +0.1 o1.5 -0.0 5.50.1 4.00.1 2.00.1 Dimensions of Reel 1.750.1 Dimensions of Carrier Tape User direction of feed Label 13.51.0 17.51.5 * Part Number marked side is always facing upside. (in mm) CERAFILr 455kHz Chip Type SFPKA Series Dimensions of Carrier Tape Trailer 160 to 190 1.750.1 Empty Leader Cover film Components Empty 240 to 280 o13.00.2 3302 400 to 560 801 8.80.1 +0.1 -0 7.50.1 2.00.1 o1.5 16.00.2 4.00.1 Dimensions of Reel 2.20.5 12.00.1 User direction of feed 5.30.1 Cover film 17.50.5 Label 21.51.0 7.40.1 * Part number marked side is always facing upside. (in mm) Continued on the following page. 81 17 P50E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. May.23,2011 Packaging Continued from the preceding page. CERAFILr 455kHz Lead Type SFPLA Series Standard of Magazine Cassette 9.00.3 4051.0 7.60.25 8.10.3 100.3 2. Quality of Magazine (1) Transparent so that input / output direction is visually recognizable. (2) With an angle of 35 CERAFILr should slip down smoothly. (3) Antistatic finish (4) Recycling Note: Magazines should be sent back for recycling. (Therefore, empty magazines should not be damaged.) 3. Dimensions of Magazine Cassette 18.70.3 1. Putting CERAFILr into Magazine A magazine should contain 50pcs of CERAFILr, with ground terminals all facing toward the "Murata" mark on a magazine, and be closed with exclusive stoppers at both ends. Above should be the minimum packaging unit. 1.1 HP51M0003-02 1.1 (in mm) Tolerance unless otherwise specified: 0.2 Material: Polycarbonate Camber of Case: 1mm max. against entire length (reference) Twist of Case: 0.5mm max. (reference) CERAFILr 455kHz Lead Type CFWLA Series Standard of Magazine Cassette 9.00.3 7.30.25 576.02.0 7.50.3 9.00.3 2. Quality of Magazine (1) Transparent so that input / output direction is visually recognizable. (2) With an angle of 35 CERAFILr should slip down smoothly. (3) Antistatic finish (4) Recycling Note: Magazines should be sent back for recycling. (Therefore, empty magazines should not be damaged.) 4. Dimensions of Magazine Cassette 18.70.3 1. Putting CERAFILr into Magazine A magazine should contain 50pcs of CERAFILr, with ground terminals all facing toward the "Murata" mark on a magazine, and be closed with exclusive stoppers at both ends. Above should be the minimum packaging unit. ANTISTATIC muRataHP51M0064 5.30.3 0.6 (in mm) Tolerance unless otherwise specified: 0.2 Material: Polycarbonate Camber of Case: 1mm max. against entire length (reference) Twist of Case: 0.5mm max. (reference) 3. Magazine should be packaged in a cardboard box. MURATA model name, quantity and outgoing inspection number should be indicated on the box. Cardboard box may contain maximum 33 magazines (1,650 pieces of filter). Continued on the following page. 17 82 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Packaging Continued from the preceding page. Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series Chip filter (3) Leader Cover film 16.00.2 Trailer 160 to 190 Empty Components Empty 240 to 280 min. 2.20.5 400 to 560 801 3302 4.30.1 8.00.1 10 max. +0.1 +0.1 o1.5 -0.0 0.30.05 Peeling strength (0.1 to 0.7N) Cover film 2.1-0.05 9.00.1 7.50.1 2.00.1 4.00.1 o1.5 -0.0 2.30.1 +0.1 Dimensions of Reel 1.750.1 Dimensions of Carrier Tape o13.00.2 17.50.5 21.51.0 User direction of feed * Part number marked side is always facing upside. (in mm) Ceramic Discriminator 10.7MHz Chip Type CDSCB Series Dimensions of Carrier Tape o1.5 2.00.05 1.750.1 4.00.1 Dimension of reel +0.1 -0 Trailer 160 to 190 Leader Cover film 10 Cover film (3) User direction of feed * Part number marked side is always facing upside. Empty 240 to 280 400 to 560 180 +0.1 -1.5 +0.1 o13.00.2 60 -0 12.00.2 (1.7 max.) 2.20.1 1.10.1 4.70.1 +0.1 o1.5 -0 0.30.05 (9.0) 4.00.1 Peeling strength 0.1 to 0.7N 5.50.05 Empty Components 2.00.5 +1.0 13.0 -0 17.01.0 ( ) : Reference (in mm) Continued on the following page. 17 83 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Discriminator 10.7MHz Lead Type CDALF Series P2 dh dh P H0 W1 W W0 L1 W2 dS1 D0 P1 F t P0 Item Lead length under the hold down tape Code Dimensions Tolerance L1 3.0 min. - Pitch of component P 12.7 0.5 Pitch of sprocket hole (1) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 Lead spacing F 5.0 +0.5 -0.2 Slant to the forward or backward dh 0 1.0 dS1 0 1.0 0.5 Slant to the left or right Width of carrier tape W 18.0 Width of hold down tape W0 6.0 min. - Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0.0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 Po20 254.0 1.5 Total tape thickness Pitch of sprocket hole (2) Remarks Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) 17 84 P50E.pdf May.23,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011 Part Number Index CDALF * * * * * * * * * * Ceramic Discriminators for FM * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p56 CDSCB * * * * * * * * * * Chip Ceramic Discriminators for FM * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p51 CFULA * * * * * * * * * * Ceramic Filters (CERAFILr) for AM * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p46 CFWLA * * * * * * * * * * Ceramic Filters (CERAFILr) for AM * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p44, 46 SFECF * * * * * * * * * * Chip Ceramic Filters (CERAFILr) for FM * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p5-6 SFECK * * * * * * * * * * Chip Ceramic Filters (CERAFILr) for FM * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p11 SFECV * * * * * * * * * * Chip Ceramic Filters (CERAFILr) for FM * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p11 SFELF * * * * * * * * * * Ceramic Filters (CERAFILr) for FM * * * * * * * * * * * * * * * * * * * * * p14, 17, 23-24, 26, 28-29, 31 SFELG * * * * * * * * * * Ceramic Filters (CERAFILr) for FM * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p20-21 SFKLF * * * * * * * * * * Ceramic Filters (CERAFILr) for FM * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p28 SFPKA * * * * * * * * * * Chip Ceramic Filters (CERAFILr) for AM * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p42 SFPLA * * * * * * * * * * Ceramic Filters (CERAFILr) for AM * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p44, 46 SFSKA * * * * * * * * * * Chip Ceramic Filters (CERAFILr) for TV/VCR * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p35 SFSKB * * * * * * * * * * Chip Ceramic Filters (CERAFILr) for TV/VCR * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p38 SFVLF * * * * * * * * * * Ceramic Filters (CERAFILr) for FM * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p28 TPSKA * * * * * * * * * * Chip Ceramic Traps * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p49 85 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf May.23,2011