SFTLF10M7GA00-B0 - Murata - Product.Network

Cat.No.P50E-5

CERAFILr

(Filters/Traps/Discriminators)

for Audio/Visual Equipment

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf

May.23,2011

P50E.pdf

May.23,2011

EU RoHS Compliant

• All the products in this catalog comply with EU RoHS.

• EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use

of Certain Hazardous Substances in Electrical and Electronic Equipment."

• For more details, please refer to our website 'Murata's Approach for EU RoHS'

(http://www.murata.com/info/rohs.html).

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CONTENTS 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
CERAFILr and "CERAFIL" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
Part Numbering 2
1. CERAFILr
1-1 CERAFILr 10.7MHz
Small Chip Type SFECF Series 5
Chip Type SFECV/SFECK Series 11
Standard Lead Type SFELF Series 14
Low Loss Type SFELF Series 17
Low Profile Type SFELG Series 20
Low Spurious Response Type SFELF Series 23
Wide Bandwidth Type SFELF Series 26
Narrow Bandwidth Type SFVLF/SFKLF/SFELF Series 28
For FM-IF Tuners SFELF Series 31
Related Data on Lead Type 34
1-2 CERAFILr 2.3-6.5MHz
4.5-6.5MHz Chip Type SFSKA Series 35
2.3-5.7MHz Chip Type SFSKB Series 38
1-3 CERAFILr 455kHz
Chip Type SFPKA Series 42
Lead Type SFPLA/CFWLA Series 44
For AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series 46
SFp Series Temperature Characteristics 48
2. Ceramic Trap
Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series  49
3. Ceramic Discriminator
10.7MHz Ultra Thin Chip Type CDSCB Series 51
10.7MHz Standard Lead Type CDALF Series   56
Applied IC Reference Table 60
Notice 61
Packaging 78
Part Number Index 85
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
P50E.pdf
May.23,2011

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf

May.23,2011

2

o Part Numbering

e

LF

w

E

u

A0

q

SF

t

F

r

10M7

y

A

i

-B0

(Part Number)

qProduct ID

wOscillation/Number of Elements

CERAFILr for FM

SF Ceramic Filters

Product ID

p is expressed "A" or subsequent code, which indicates the

structure/size.

eStructure/Size

Bulk

Embossed Taping ø180mm

Embossed Taping ø330mm

1500pcs. /Radial Taping H0=18mm

1000pcs. /Radial Taping H0=18mm

iPackaging

-B0

-R0

-R1

-A0

-A1

Code Packaging

Radial taping is applied to lead type and embossed taping to chip

type. With non-standard products, two-digit alphanumerics indicating

"Individual Specification" are added between "uSeries" and

"iPackaging".

3dB bandwidth of "F" signifies the frequency difference (both + and -)

from reference frequency which is nominal center frequency.

2 Elements Thickness Expander mode

3 Elements Thickness Expander mode

2 Elements Thickness Expander mode

(2nd Harmonic)

2 Elements Thickness Expander mode

(3rd Over Tone)

E

T

V

K

Code Oscillation/Number of Elements

Lead Type

Chip Type

Lp

Cp

Code Structure/Size

rNominal Center Frequency

Expressed by four-digit alphanumerics. The unit is in hertz (Hz).

Decimal point is expressed by capital letter "M" in case of MHz.

t3dB Bandwidth

C

D

E

F

G

H

J

K

L

M

N

450kHz min

350kHz min

330kHz

280kHz

230kHz

180kHz

150kHz

110kHz

80kHz

50kHz

35kHz

Code 3dB Bandwidth

uSeries

A0 Two-digit alphanumerics express series

Code Series

yCenter Frequency/Tolerance

A

B

C

D

E

H

V

W

K

Z

M

F

Center Frequency mentioned by specification

-30kHz shifted from center frequency of code "A"

+30kHz shifted from center frequency of code "A"

-60kHz shifted from center frequency of code "A"

+60kHz shifted from center frequency of code "A"

Center Frequency mentioned by specification

-50kHz shifted from center frequency of code "H"

+50kHz shifted from center frequency of code "H"

Center Frequency mentioned by specification

Combination of A, B, C, D, E

Combination of A, B, C

Nominal Center Frequency

Code Center Frequency

±30kHz

±25kHz

±20kHz

—

Tolerance

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf

May.23,2011

3

u

-R1

e

KA

w

S

r

4M50

y

00

t

CF

q

SF

(Part Number)

qProduct ID

wOscillation/Numbers of Element

CERAFILr

SF Ceramic Filters

Product ID

tProduct Specification Code (1)

BF

CF

DF

EF

Code Product Specification Code (1)

With non-standard products, two-digit alphanumerics indicating

"Individual Specification" is added between "yProduct Specification

Code (2)" and "uPackaging".

eStructure/Size

Bulk

Embossed Taping ø=330mm

Tight Bandwidth Type

Standard Bandwidth Type

Broad Bandwidth Type

Ultra-broad Bandwidth Type

yProduct Specification Code (2)

00

Code Product Specification Code (2)

Standard Type

uPackaging

-B0

-R1

Code Packaging

2 Elements Thickness Shear mode

S

Code Oscillation/Numbers of Element

Chip Type

Kp

Code Structure/Size

p is expressed "A" or subsequent code, which indicates the

structure/size.

rNominal Center Frequency

Expressed by four-digit alphanumerics. The unit is in hertz (Hz).

Decimal point is expressed by capital letter "M" in case of MHz.

(Part Number)

qProduct ID

wOscillation/Numbers of Element

CERAFILr for AM

SF

CF

Ceramic Filters

Ceramic Filters Three-digit alphanumerics indicate product

specification of 3dB or 6dB frequency tolerance.

Product ID

tProduct Specification

D4A

Code Product Specification

ppA indicates standard type.

p is "A" or subsequent code, which indicates the structure/size. It

varies depending on vibration mode and number of elements.

eStructure/Size Bulk

Embossed Taping (ø180mm)

Embossed Taping (ø330mm)

Magazine Cassette

yPackaging

-B0

-R0

-R1

-M0

Code Packaging

Radial taping is applied to lead type and embossed taping to chip

type. With non-standard products, three-digit alphanumerics

indicating "Individual Specification" is added between "tProduct

Specification" and "yPackaging".

4 Elements Area Expansion mode

P

Code Oscillation/Numbers of Element

Lead Type

Chip Type

Lp

Cp/Kp

Code Structure/Size

y

-B0

e

KA

w

P

r

455K

t

D4A

q

SF

rNominal Center Frequency

Expressed by four-digit alphanumerics. The unit is in hertz (Hz).

Capital letter "K" following three figures expresses the unit of

"kHz".

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf

May.23,2011

4

Ceramic Traps

y

00

u

-R0

e

KA

w

S

r

4M00

t

B

q

TP

(Part Number)

qProduct ID

wFunction

TP Ceramic Traps

Product ID

tProduct Specification Code (1)

B

C

Code Product Specification (1)

With non-standard products, three-digit alphanumerics indicating

"Individual Specification" is added between "yProduct Specification

Code (2)" and "uPackaging".

eStructure/Size

Bulk

Embossed Taping ø=330mm

Broad-bandwidth Type

Low-capacitance Type

yProduct Specification Code (2)

00

Code Product Specification (2)

Standard Type

uPackaging

-B0

-R1

Code Packaging

Single Traps

S

Code Function

Chip Type

Kp

Code Structure/Size

p is expressed "A" or subsequent code, which indicates the

structure/size.

rNominal Center Frequency

Expressed by four-digit alphanumerics. The unit is in hertz (Hz).

Decimal point is expressed by capital letter "M" in case of MHz.

e

LF

w

A

r

10M7

i

-B0

u

001

q

CD

t

G

y

A

(Part Number)

qProduct ID

wOscillation

Discriminators for FM

CD Discriminators

Product ID

Radial taping is applied to lead type and embossed taping to chip

type. With non-standard products, an alphanumerics indicating

"Individual Specification" is added between "uIC" and

"iPackaging".

eStructure/Size

Bulk

Radial Taping H0=18mm

Embossed Taping ø=180mm

Embossed Taping ø=330mm

uIC

001

Code IC

Applicable IC Control Code

iPackaging

-B0

-A0

-R0

-R1

Code Packaging

Thickness Expander mode

Thickness Shear mode

A

S

Code Oscillation

Lead Type

Chip Type

Lp

Cp

Code Structure/Size

p is expressed "A" or subsequent code, which indicates the

structure/size.

rNominal Center Frequency

Expressed by four-digit alphanumerics. The unit is in hertz (Hz).

Decimal point is expressed by capital letter "M" in case of MHz.

tSeries

G Two-digit alphanumerics express series

Code Series

yCenter Frequency/Tolerance

A

B

C

D

E

H

V

W

K

Z

M

F

Center Frequency mentioned by specification

-30kHz shifted from center frequency of code "A"

+30kHz shifted from center frequency of code "A"

-60kHz shifted from center frequency of code "A"

+60kHz shifted from center frequency of code "A"

Center Frequency mentioned by specification

-50kHz shifted from center frequency of code "H"

+50kHz shifted from center frequency of code "H"

Center Frequency mentioned by specification

Combination of A, B, C, D, E

Combination of A, B, C

Nominal Center Frequency

Code Center Frequency

±30kHz

±25kHz

±20kHz

—

Tolerance

3dB bandwidth of "F" signifies the frequency difference (both + and -)

from reference frequency which is nominal center frequency.

P50E.pdf

May.23,2011

5

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

Small Chip Type SFECF Series

SFECF10M7 series for FM receivers are small,

high performance and super thin (1.4mm max.) filters.

The piezoelectric element is sandwiched by the

ceramics substrate.

They have 1.4mm max. thickness and a small mounting

area. (3.45x3.1mm)

SFECF series and CDSCB series (MHz Discriminator)

enable customers to make VICS/RKE/TPMS set very thin

and small.

■ Features

1. The filters are mountable by automatic placers.

2. They are slim, at only 1.4mm max. thickness, and

have a small mounting area (3.45x3.1mm) enabling

flexible PCB design.

3. Various bandwidths are available. Select a

suitable type in accordance with the desired

selectivity.

4. Operating Temperature Range:

-20 to +80 (degrees C)(Standard Type)

-40 to +85 (degrees C)(High-reliability Type)

Storage Temperature Range:

-40 to +85 (degrees C)(Standard Type)

-55 to +85 (degrees C)(High-reliability Type)

0.75±0.3

(in mm)

1.3±0.1

3.1±0.2

3.45±0.2

(0.6)(0.6) (0.6)

(1.28)

0 to 0.4

(6)

(1.28)(1.28)

0.65±0.3

0.85±0.3

0 to 0.35 0 to 0.35

0 to 0.4

(5) (4)

(1) (2) (3)

0.65±0.3

0.3 min.0.3 min.

: EIAJ Monthly Code

: Reference( )

(1) : Input

(2)(5) : Ground

(3)(4) : No connect

(6) : Output

0.7±0.3

Input electrode

marker

Standard Type

Part Number Center

Frequency

(fo) (MHz)

Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB) Ripple

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

Input/Output

Impedance

(ohm)

SFECF10M7HA00-R0

10.700

±30kHz - 180 ±40kHz 470 max. 4.0 ±2.0dB 1.0 max. 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

SFECF10M7HF00-R0

- 10.700 fn±25 min. 510 max. 8.0 max.

[at fn] 1.0 max. 30 min.

[within 9MHz to fn] 25 min.

[within fn to 12MHz] 330

SFECF10M7GA00-R0

10.700

±30kHz - 230 ±50kHz 510 max. 3.5 ±2.0dB 1.0 max. 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

SFECF10M7GF00-R0

- 10.700 fn±45 min. 560 max. 8.0 max.

[at fn] 1.0 max. 30 min.

[within 9MHz to fn] 25 min.

[within fn to 12MHz] 330

SFECF10M7FA00-R0

10.700

±30kHz - 280 ±50kHz 590 max. 3.0 ±2.0dB 1.0 max. 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

SFECF10M7FF00-R0

- 10.700 fn±65 min. 620 max. 7.0 max.

[at fn] 1.0 max. 30 min.

[within 9MHz to fn] 25 min.

[within fn to 12MHz] 330

SFECF10M7EA00-R0

10.700

±30kHz - 330 ±50kHz 700 max. 3.0 ±2.0dB 1.0 max. 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

SFECF10M7DA0001-R0

10.700

±30kHz - 420 min. 950 max. 3.0 ±2.0dB 3.0 max. 35 min.

[within 9MHz to fo] 25 min.

[within fo to 12MHz] 330

SFECF10M7DF00-R0

- 10.700 fn±150 min. 990 max. 6.0 max.

[at fn] 3.0 max. 20 min.

[within 9MHz to fn] 20 min.

[within fn to 12MHz] 330

Area of Attenuation: [within 20dB]

Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.

Center frequency (fo) defined by the center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

P50E.pdf

May.23,2011

6

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

High-reliability Type

Part Number Center

Frequency

(fo) (MHz)

Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB) Ripple

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

Input/Output

Impedance

(ohm)

SFECF10M7HA00S0-R0

10.700

±30kHz - 180 ±40kHz 470 max. 4.0 ±2.0dB 1.0 max. 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

SFECF10M7HF00S0-R0

- 10.700 fn±25 min. 510 max. 8.0 max.

[at fn] 1.0 max. 30 min.

[within 9MHz to fn] 25 min.

[within fn to 12MHz] 330

SFECF10M7GA00S0-R0

10.700

±30kHz - 230 ±50kHz 510 max. 3.5 ±2.0dB 1.0 max. 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

SFECF10M7GF00S0-R0

- 10.700 fn±45 min. 560 max. 8.0 max.

[at fn] 1.0 max. 30 min.

[within 9MHz to fn] 25 min.

[within fn to 12MHz] 330

SFECF10M7FA00S0-R0

10.700

±30kHz - 280 ±50kHz 590 max. 3.0 ±2.0dB 1.0 max. 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

SFECF10M7FF00S0-R0

- 10.700 fn±65 min. 630 max. 7.0 max.

[at fn] 1.0 max. 30 min.

[within 9MHz to fn] 25 min.

[within fn to 12MHz] 330

SFECF10M7EA00S0-R0

10.700

±30kHz - 330 ±50kHz 700 max. 3.0 ±2.0dB 1.0 max. 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

SFECF10M7DF00S0-R0

- 10.700 fn±145 min. 990 max. 6.0 max.

[at fn] 3.0 max. 20 min.

[within 9MHz to fn] 20 min.

[within fn to 12MHz] 330

Area of Attenuation: [within 20dB]

Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.

Center frequency (fo) defined by the center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

■ Standard Center Frequency Rank Code

CODE

D

B

A

C

E

Z

M

30kHz Step

10.64MHz±30kHz

10.67MHz±30kHz

10.70MHz±30kHz

10.73MHz±30kHz

10.76MHz±30kHz

25kHz Step

10.650MHz±25kHz

10.675MHz±25kHz

10.700MHz±25kHz

10.725MHz±25kHz

10.750MHz±25kHz

Combination A, B, C, D, E

Combination A, B, C

■ Standard Land Pattern Dimensions

Input

Ground

No connect

Output

(1) :

(2)(5) :

(3)(4) :

(6) :

(in mm)

It shows solder resist land pattern.

1.051.401.05

0.10.10.10.1

0.8 0.6 0.8 0.6 0.8

0.1 0.1

0.3

(6) (5) (4)

(1) (2) (3)

■ Test Circuit

(1)

(2)

(3)

(6)

(5)

(4)

R2C2E2RF

Voltmeter

R1

E1

S.S.G.

Rg

Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5%

C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance

of RF Volt Meter)

E1 : S.S.G. Output Voltage

Input

Ground

No connect

Output

(1) :

(2)(5) :

(3)(4) :

(6) :

Continued on the following page.

P50E.pdf

May.23,2011

7

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Frequency Characteristics Standard Type

SFECF10M7HA00-R0/SFECF10M7HF00-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

SFECF10M7GA00-R0/SFECF10M7GF00-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

SFECF10M7FA00-R0/SFECF10M7FF00-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

SFECF10M7EA00-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.300 10.500 10.700 10.900 11.100

SFECF10M7DA0001-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

SFECF10M7DF00-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

P50E.pdf

May.23,2011

8

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Frequency Characteristics High-reliability Type

SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

SFECF10M7GA00S0-R0/SFECF10M7GF00S0-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

SFECF10M7EA00S0-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.300 10.500 10.700 10.900 11.100

SFECF10M7DF00S0-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

P50E.pdf

May.23,2011

9

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Frequency Characteristics (Spurious) Standard Type

SFECF10M7HA00-R0/SFECF10M7HF00-R0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7GA00-R0/SFECF10M7GF00-R0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7FA00-R0/SFECF10M7FF00-R0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7EA00-R0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7DA0001-R0/SFECF10M7DF00-R0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

P50E.pdf

May.23,2011

10

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Frequency Characteristics (Spurious) High-reliability Type

SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7GA00S0-R0/SFECF10M7GF00S0-R0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7EA00S0-R0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFECF10M7DF00S0-R0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

P50E.pdf

May.23,2011

11

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

Chip Type SFECV/SFECK Series

SFECV/SFECK10M7 series for FM receivers are monolithic

type ceramic filters which utilize the thickness expander

mode of piezoelectric ceramics. SFECV series enable

customers to make AM/FM set very thin, and it can be

of help to the total chip circuit.

■ Features

1. The piezoelectric element is sandwiched by heat

resistant substrate, thus it has excellent mechanical

strength, and it is suitable for automatic mounting.

2. Various bandwidths are available. Select a suitable

type in accordance with the desired selectivity.

3. Operating Temperature Range:

-20 to +80 (degrees C)(Standard Type)

-40 to +85 (degrees C)(High-reliability Type)

Storage Temperature Range:

-40 to +85 (degrees C)(Standard Type)

-55 to +85 (degrees C)(High-reliability Type)

■ Applications

1. Small, thin radios

2. Automotive radios

3. Headphone stereos

6.9±0.3

*

*

2.9±0.31.5±0.2

4.05±0.4

1.2±0.5

1.0±0.5 1.0±0.5

1.2±0.3 1.2±0.5 1.5±0.2

(3) (2) (1)

(1) : Input

(2) : Ground

(3) : Output

** : EIAJ Monthly Code

** : Center Frequency Rank Code

: Marking

(in mm)

1.0±0.5

Standard Type

Part Number Center

Frequency

(fo) (MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB) Ripple

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

Input/Output

Impedance

(ohm)

SFECV15M0EQ0001-R0

15.000

±50kHz 300 min. 750 max. 7.0 max. 1.0 max. 30 min.

[within 14MHz to fo] 30 min.

[within fo to 16MHz] 330

SFECV10M7KA00-R0

10.700

±30kHz 110 ±30kHz 320 max. 6.0 ±2.0dB 1.0 max. 35 min.

[within 9MHz to fo] 35 min.

[within fo to 12MHz] 330

SFECV10M7JA00-R0

10.700

±30kHz 150 ±40kHz 380 max. 5.5 ±2.0dB 1.0 max. 35 min.

[within 9MHz to fo] 35 min.

[within fo to 12MHz] 330

Area of Attenuation: [within 20dB]

Area of Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

High-reliability Type

Part Number Center

Frequency

(fo) (MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB) Ripple

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

Input/Output

Impedance

(ohm)

SFECK10M7KA00S0-R0

10.700

±30kHz 110 ±30kHz 320 max. 6.0 ±2.0dB 1.0 max. 35 min.

[within 9MHz to fo] 35 min.

[within fo to 12MHz] 330

SFECK10M7JA00S0-R0

10.700

±30kHz 150 ±40kHz 380 max. 5.5 ±2.0dB 1.0 max. 35 min.

[within 9MHz to fo] 35 min.

[within fo to 12MHz] 330

Area of Attenuation: [within 20dB]

Area of Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

P50E.pdf

May.23,2011

12

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Standard Center Frequency Rank Code

CODE

D

B

A

C

E

Z

M

30kHz Step

10.64MHz±30kHz

10.67MHz±30kHz

10.70MHz±30kHz

10.73MHz±30kHz

10.76MHz±30kHz

25kHz Step

10.650MHz±25kHz

10.675MHz±25kHz

10.700MHz±25kHz

10.725MHz±25kHz

10.750MHz±25kHz

Combination A, B, C, D, E

Combination A, B, C

■ Standard Land Pattern Dimensions

(in mm)

Land

1.2

1.65

2.85 2.85

1.65

1.2 1.2

4.0

■ Test Circuit

(1) (3)

(2)

R2C2E2RF

Voltmeter

R1

E1

S.S.G.

=-10dBm

Rg

Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5%

C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance

of RF Volt Meter)

E1 : S.S.G. Output Voltage

(1) : Input

(2) : Ground

(3) : Output

■ Frequency Characteristics Standard Type

SFECV15M0EQ0001-R0

10.0

8.0

6.0

4.0

2.0

0.0

Frequency (MHz)

Attenuation (dB)

14.700 14.800 14.900 15.000 15.100 15.200 15.300

G.D.T. (µsec.)

0

2

4

6

8

10

SFECV10M7KA00-R0

4.0

3.5

4.5

5.0

5.5

6.0

6.5

7.0

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

SFECV10M7JA00-R0

8.0

7.5

7.0

6.5

6.0

5.5

5.0

4.5

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

P50E.pdf

May.23,2011

13

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Frequency Characteristics High-reliability Type

SFECK10M7KA00S0-R0

4.0

3.5

4.5

5.0

5.5

6.0

6.5

7.0

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

SFECK10M7JA00S0-R0

8.0

7.5

7.0

6.5

6.0

5.5

5.0

4.5

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

■ Frequency Characteristics (Spurious) Standard Type

SFECV15M0EQ0001-R0

0

70

80

13.000 15.00014.000 16.000 17.000

Frequency (MHz)

Attenuation (dB)

60

50

40

30

20

10

SFECV10M7KA00-R0

8.700

70

60

50

40

30

20

10

0

9.700 10.700

Frequency (MHz)

Attenuation (dB)

11.700 12.700

SFECV10M7JA00-R0

8.700

70

60

50

40

30

20

10

0

9.700 10.700

Frequency (MHz)

Attenuation (dB)

11.700 12.700

■ Frequency Characteristics (Spurious) High-reliability Type

SFECK10M7KA00S0-R0

8.700

70

60

50

40

30

20

10

0

9.700 10.700

Frequency (MHz)

Attenuation (dB)

11.700 12.700

SFECK10M7JA00S0-R0

8.700

70

60

50

40

30

20

10

0

9.700 10.700

Frequency (MHz)

Attenuation (dB)

11.700 12.700

P50E.pdf

May.23,2011

14

3

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

Standard Lead Type SFELF Series

SFELF10M7 series for FM receivers are monolithic type

ceramic filters which use the thickness expander mode

of the piezoelectric ceramic.

As part of our environmental protection compliance,

solder for terminal plating and terminal-element connection

inside of the ceramic filter contains no lead (Pb).

■ Features

1. High mechanical strength

2. Low loss, favorable waveform symmetry, and high

selectivity

3. Various bandwidths are available for applications

in wide to narrow bands.

4. Small dispersion and stable characteristics

5. Change in center frequency is typically within

+-30ppm/(degrees C) at -20 to +80 (degrees C).

6. High reliability

(1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7HA00-B0

(1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7GA00-B0

(1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7FA00-B0

Part Number Center

Frequency

(fo) (MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

Input/Output

Impedance

(ohm)

SFELF10M7HA00-B0 10.700

±30kHz 180 ±40kHz 520 max. 7.0 max. 40 min.

[within 9MHz to fo] 40 min.

[within fo to 12MHz] 330

SFELF10M7GA00-B0 10.700

±30kHz 230 ±50kHz 570 max. 4.0 ±2.0dB 40 min.

[within 9MHz to fo] 40 min.

[within fo to 12MHz] 330

SFELF10M7FA00-B0 10.700

±30kHz 280 ±50kHz 650 max. 4.0 ±2.0dB 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

Area of Attenuation: [within 20dB]

Area of Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

P50E.pdf

May.23,2011

15

3

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Standard Center Frequency Rank Code

CODE

D

B

A

C

E

Z

M

30kHz Step

10.64MHz±30kHz

10.67MHz±30kHz

10.70MHz±30kHz

10.73MHz±30kHz

10.76MHz±30kHz

25kHz Step

10.650MHz±25kHz

10.675MHz±25kHz

10.700MHz±25kHz

10.725MHz±25kHz

10.750MHz±25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A, B, C, D, E

Combination A, B, C

■ Test Circuit

(1) (2) (3)

C

S.S.G

RF

Rg

R1

R2

Rg + R1 = R2 = Input and Output Impedance

C = 10pF (Including stray capacitance and input

capacitance of RF voltmeter.)

Voltmeter

(1) : Input

(2) : Ground

(3) : Output

■ Frequency Characteristics

SFELF10M7HA00-B0

6.5

6.0

5.5

5.0

4.5

4.0

3.5

3.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.500 10.600 10.700 10.800 10.900

SFELF10M7GA00-B0

6.0

5.5

5.0

4.5

4.0

3.5

3.0

2.5

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.500 10.600 10.700 10.800 10.900

SFELF10M7FA00-B0

5.5

5.0

4.5

4.0

3.5

3.0

2.5

2.0

Frequency (MHz)

Attenuation (dB)

10.500 10.600 10.700 10.800 10.900

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

P50E.pdf

May.23,2011

16

3

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Frequency Characteristics (Spurious)

SFELF10M7HA00-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFELF10M7GA00-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFELF10M7FA00-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

P50E.pdf

May.23,2011

17

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

Low Loss Type SFELF Series

SFELF10M7 series for FM receivers are monolithic type

ceramic filters which use the thickness expander mode

of the piezoelectric ceramic.

As part of the environment protection activity, solder

for terminal plating and terminal-element connection

inside of ceramic filter contain no lead (Pb).

■ Features

1. Insertion loss is 1 to 1.5dB lower than

conventional products. These types are useful for

elevating the sensitivity of sets.

2. Small dispersion and stable characteristics

3. Excellent shape factor of frequency response

4. Good waveform symmetry

(1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7JAA0-B0

(1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7HAA0-B0

(1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7GAA0-B0

(1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7FAA0-B0

Part Number Center

Frequency

(fo) (MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

Input/Output

Impedance

(ohm)

SFELF10M7JAA0-B0 10.700

±30kHz 150 ±40kHz 360 max. 4.5 ±2.0dB 35 min.

[within 9MHz to fo] 35 min.

[within fo to 12MHz] 330

SFELF10M7HAA0-B0 10.700

±30kHz 180 ±40kHz 470 max. 3.5 ±1.5dB 35 min.

[within 9MHz to fo] 35 min.

[within fo to 12MHz] 330

SFELF10M7GAA0-B0 10.700

±30kHz 230 ±50kHz 520 max. 3.0 ±2.0dB 35 min.

[within 9MHz to fo] 35 min.

[within fo to 12MHz] 330

SFELF10M7FAA0-B0 10.700

±30kHz 280 ±50kHz 590 max. 2.5 ±2.0dB 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

Area of Attenuation: [within 20dB]

Area of Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

P50E.pdf

May.23,2011

18

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Standard Center Frequency Rank Code

CODE

D

B

A

C

E

Z

M

30kHz Step

10.64MHz±30kHz

10.67MHz±30kHz

10.70MHz±30kHz

10.73MHz±30kHz

10.76MHz±30kHz

25kHz Step

10.650MHz±25kHz

10.675MHz±25kHz

10.700MHz±25kHz

10.725MHz±25kHz

10.750MHz±25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A, B, C, D, E

Combination A, B, C

■ Test Circuit

(1) (2) (3)

C

S.S.G

RF

Rg

R1

R2

Rg + R1 = R2 = Input and Output Impedance

C = 10pF (Including stray capacitance and input

capacitance of RF voltmeter.)

Voltmeter

(1) : Input

(2) : Ground

(3) : Output

■ Frequency Characteristics

SFELF10M7JAA0-B0

7.0

6.5

6.0

5.5

5.0

4.5

4.0

3.5

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.500 10.600 10.700 10.800 10.900

SFELF10M7HAA0-B0

6.5

6.0

5.5

5.0

4.5

4.0

3.5

3.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.500 10.600 10.700 10.800 10.900

SFELF10M7GAA0-B0

6.0

5.5

5.0

4.5

4.0

3.5

3.0

2.5

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.500 10.600 10.700 10.800 10.900

SFELF10M7FAA0-B0

5.5

5.0

4.5

4.0

3.5

3.0

2.5

2.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.500 10.600 10.700 10.800 10.900

P50E.pdf

May.23,2011

19

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Frequency Characteristics (Spurious)

SFELF10M7JAA0-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFELF10M7HAA0-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFELF10M7GAA0-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFELF10M7FAA0-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

P50E.pdf

May.23,2011

20

5

CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

Low Profile Type SFELG Series

6.0 max.

(1) (2) (3)

7.5±2.0

5.0±1.0

3.0±1.0

2.5

±

0.2

2.5

±

0.2

1.3±0.1

0.3±0.1

0.5±0.1

1.5±0.1

E I A J

C O D E

M A R K I N G

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELG10M7KA00-B0

6.0 max.

(1) (2) (3)

7.5±2.0

5.0±1.0

3.0±1.0

2.5

±

0.2

2.5

±

0.2

1.3±0.1

0.3±0.1

0.5±0.1

1.5±0.1

E I A J

C O D E

M A R K I N G

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELG10M7JA00-B0

6.0 max.

(1) (2) (3)

7.5±2.0

5.0±1.0

3.0±1.0

2.5

±

0.2

2.5

±

0.2

1.3±0.1

0.3±0.1

0.5±0.1

1.5±0.1

E I A J

C O D E

M A R K I N G

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELG10M7HA00-B0

6.0 max.

(1) (2) (3)

7.5±2.0

5.0±1.0

3.0±1.0

2.5

±

0.2

2.5

±

0.2

1.3±0.1

0.3±0.1

0.5±0.1

1.5±0.1

E I A J

C O D E

M A R K I N G

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELG10M7GA00-B0

6.0 max.

(1) (2) (3)

7.5±2.0

5.0±1.0

3.0±1.0

2.5

±

0.2

2.5

±

0.2

1.3±0.1

0.3±0.1

0.5±0.1

1.5±0.1

E I A J

C O D E

M A R K I N G

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELG10M7FA00-B0

SFELG10M7 series for FM receivers are monolithic type

ceramic filters which use the thickness expander mode

of the piezoelectric ceramic.

As part of the environment protection activity, solder

for terminal plating and terminal-element connection

inside of ceramic filter contain no lead (Pb).

■ Features

1. Installed height is 6.0mm, making it well suited

for compact, thin sets.

2. Environmental reliability is the same as those of

the ceramic filter SFELF10M7 series.

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Part Number Center

Frequency

(fo) (MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

Input/Output

Impedance

(ohm)

SFELG10M7KA00-B0 10.700

±30kHz 110 ±30kHz 350 max. 7.0 ±2.0dB 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

SFELG10M7JA00-B0 10.700

±30kHz 150 ±40kHz 360 max. 4.5 ±2.0dB 35 min.

[within 9MHz to fo] 35 min.

[within fo to 12MHz] 330

SFELG10M7HA00-B0 10.700

±30kHz 180 ±40kHz 470 max. 3.5 ±2.0dB 35 min.

[within 9MHz to fo] 35 min.

[within fo to 12MHz] 330

SFELG10M7GA00-B0 10.700

±30kHz 230 ±50kHz 570 max. 3.0 ±2.0dB 40 min.

[within 9MHz to fo] 40 min.

[within fo to 12MHz] 330

Continued on the following page.

P50E.pdf

May.23,2011

21

5

Part Number Center

Frequency

(fo) (MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

Input/Output

Impedance

(ohm)

SFELG10M7FA00-B0 10.700

±30kHz 280 ±50kHz 650 max. 3.0 ±2.0dB 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

Area of Attenuation: [within 20dB]

Area of Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

■ Standard Center Frequency Rank Code

CODE

D

B

A

C

E

Z

M

30kHz Step

10.64MHz±30kHz

10.67MHz±30kHz

10.70MHz±30kHz

10.73MHz±30kHz

10.76MHz±30kHz

25kHz Step

10.650MHz±25kHz

10.675MHz±25kHz

10.700MHz±25kHz

10.725MHz±25kHz

10.750MHz±25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A, B, C, D, E

Combination A, B, C

■ Test Circuit

(1) (2) (3)

C

S.S.G

RF

Rg

R1

R2

Rg + R1 = R2 = Input and Output Impedance

C = 10pF (Including stray capacitance and input

capacitance of RF voltmeter.)

Voltmeter

(1) : Input

(2) : Ground

(3) : Output

■ Frequency Characteristics

SFELG10M7KA00-B0

8.0

7.5

7.0

6.5

6.0

5.5

5.0

4.5

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

10.70010.60010.500 10.800 10.900

1

2

3

4

5

6

7

0

SFELG10M7JA00-B0

7.5

7.0

6.5

6.0

5.5

5.0

4.5

4.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

10.70010.60010.500 10.800 10.900

1

2

3

4

5

6

7

0

Continued on the following page.

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

SFELG10M7HA00-B0

6.5

6.0

5.5

5.0

4.5

4.0

3.5

3.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.500 10.600 10.700 10.800 10.900

SFELG10M7GA00-B0

6.0

5.5

5.0

4.5

4.0

3.5

3.0

2.5

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.500 10.600 10.700 10.800 10.900

P50E.pdf

May.23,2011

22

5

Continued from the preceding page.

■ Frequency Characteristics

SFELG10M7FA00-B0

5.5

5.0

4.5

4.0

3.5

3.0

2.5

2.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.500 10.600 10.700 10.800 10.900

■ Frequency Characteristics (Spurious)

SFELG10M7KA00-B0

Attenuation (dB)

0

8.700 9.700 10.700 11.700 12.700

Frequency (MHz)

10

20

30

40

50

60

70

SFELG10M7JA00-B0

Frequency (MHz)

Attenuation (dB)

10

10.700

20

30

40

50

60

70

0

9.7008.700 11.700 12.700

SFELG10M7HA00-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFELG10M7GA00-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

SFELG10M7FA00-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

P50E.pdf

May.23,2011

23

6

CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

Low Spurious Response Type SFELF Series

SFELF10M7 series for FM receivers are monolithic type

ceramic filters which use the thickness expander mode

of the piezoelectric ceramic.

As part of the environment protection activity, solder

for terminal plating and terminal-element connection

inside of ceramic filter contain no lead (Pb).

■ Features

These types have lower spurious response compared

to the standard filters. (1)

(2)

(3)

7.5±2.0

5.0±1.03.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

MARKING

EIAJ

CODE

(in mm)

SFELF10M7KAB0-B0

(1)

(2)

(3)

7.5±2.0

5.0±1.03.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

MARKING

EIAJ

CODE

(in mm)

SFELF10M7JAB0-B0

(1)

(2)

(3)

7.5±2.0

5.0±1.03.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

MARKING

EIAJ

CODE

(in mm)

SFELF10M7HAB0-B0

(1)

(2)

(3)

7.5±2.0

5.0±1.03.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

MARKING

EIAJ

CODE

(in mm)

SFELF10M7GAB0-B0

(1)

(2)

(3)

7.5±2.0

5.0±1.03.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

MARKING

EIAJ

CODE

(in mm)

SFELF10M7FAB0-B0

Part Number Center

Frequency

(fo) (MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

Input/Output

Impedance

(ohm)

SFELF10M7KAB0-B0 10.700

±30kHz 110 ±30kHz 350 max. 7.0 ±2.0dB 45/30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

SFELF10M7JAB0-B0 10.700

±30kHz 150 ±40kHz 380 max. 5.5 ±2.0dB 45 min.

[within 9MHz to fo] 45 min.

[within fo to 12MHz] 330

SFELF10M7HAB0-B0 10.700

±30kHz 180 ±40kHz 520 max. 5.0 ±2.0dB 45 min.

[within 9MHz to fo] 45 min.

[within fo to 12MHz] 330

SFELF10M7GAB0-B0 10.700

±30kHz 230 ±50kHz 570 max. 3.0 ±2.0dB 45 min.

[within 9MHz to fo] 45 min.

[within fo to 12MHz] 330

Continued on the following page.

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

24

6

Continued from the preceding page.

Area of Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

■ Standard Center Frequency Rank Code

CODE

D

B

A

C

E

Z

M

30kHz Step

10.64MHz±30kHz

10.67MHz±30kHz

10.70MHz±30kHz

10.73MHz±30kHz

10.76MHz±30kHz

25kHz Step

10.650MHz±25kHz

10.675MHz±25kHz

10.700MHz±25kHz

10.725MHz±25kHz

10.750MHz±25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A, B, C, D, E

Combination A, B, C

■ Test Circuit

(1) (2) (3)

C

S.S.G

RF

Rg

R1

R2

Rg + R1 = R2 = Input and Output Impedance

C = 10pF (Including stray capacitance and input

capacitance of RF voltmeter.)

Voltmeter

(1) : Input

(2) : Ground

(3) : Output

■ Frequency Characteristics

SFELF10M7KAB0-B0

8.0

7.5

7.0

6.5

6.0

5.5

5.0

4.5

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

10.70010.60010.500 10.800 10.900

1

2

3

4

5

6

7

0

SFELF10M7JAB0-B0

7.0

6.5

6.0

5.5

5.0

4.5

4.0

3.5

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

10.70010.60010.500 10.800 10.900

1

2

3

4

5

6

7

0

Continued on the following page.

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Part Number Center

Frequency

(fo) (MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

Input/Output

Impedance

(ohm)

SFELF10M7FAB0-B0 10.700

±30kHz 280 ±50kHz 650 max. 3.0 ±2.0dB 45 min.

[within 9MHz to fo] 45 min.

[within fo to 12MHz] 330

Area of Attenuation: [within 20dB]

SFELF10M7HAB0-B0

6.5

6.0

5.5

5.0

4.5

4.0

3.5

3.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.500 10.600 10.700 10.800 10.900

SFELF10M7GAB0-B0

6.0

5.5

5.0

4.5

4.0

3.5

3.0

2.5

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.500 10.600 10.700 10.800 10.900

P50E.pdf

May.23,2011

25

6

Continued from the preceding page.

■ Frequency Characteristics

SFELF10M7FAB0-B0

5.5

5.0

4.5

4.0

3.5

3.0

2.5

2.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.500 10.600 10.700 10.800 10.900

■ Frequency Characteristics (Spurious)

SFELF10M7KAB0-B0

Frequency (MHz)

Attenuation (dB)

0

10

20

30

40

50

60

70 10.700 11.700 12.7008.700 9.700

SFELF10M7JAB0-B0

Frequency (MHz)

Attenuation (dB)

0

10.700 11.700 12.7008.700 9.700

10

20

30

40

50

60

70

SFELF10M7HAB0-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFELF10M7GAB0-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

SFELF10M7FAB0-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

P50E.pdf

May.23,2011

26

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

Wide Bandwidth Type SFELF Series

SFELF10M7 series for FM receivers are monolithic type

ceramic filters which use the thickness expander mode

of the piezoelectric ceramic.

As part of the environment protection activity, solder

for terminal plating and terminal-element connection

inside of ceramic filter contain no lead (Pb).

■ Features

Realizes wider band characteristics not obtained by

conventional ceramic filters. (1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7EA00-B0

(1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7DF00-B0

Part Number Center

Frequency

(fo) (MHz)

Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

Input/Output

Impedance

(ohm)

SFELF10M7EA00-B0

10.700

±30kHz - 330 ±50kHz 680 max. 4.0 ±2.0dB 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

SFELF10M7DF00-B0

- 10.700 fn±175 min. 950 max. 3.0 ±2.0dB 20 min.

[within 5MHz to fn] 20 min.

[within fn to 15MHz] 470

Area of Attenuation: [within 20dB]

Area of Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

■ Standard Center Frequency Rank Code (SFELF10M7EA00-B0)

CODE

D

B

A

C

E

Z

M

30kHz Step

10.64MHz±30kHz

10.67MHz±30kHz

10.70MHz±30kHz

10.73MHz±30kHz

10.76MHz±30kHz

25kHz Step

10.650MHz±25kHz

10.675MHz±25kHz

10.700MHz±25kHz

10.725MHz±25kHz

10.750MHz±25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A, B, C, D, E

Combination A, B, C

P50E.pdf

May.23,2011

27

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Test Circuit

(1) (2) (3)

C

S.S.G

RF

Rg

R1

R2

Rg + R1 = R2 = Input and Output Impedance

C = 10pF (Including stray capacitance and input

capacitance of RF voltmeter.)

Voltmeter

(1) : Input

(2) : Ground

(3) : Output

■ Frequency Characteristics

SFELF10M7EA00-B0

4.5

4.0

3.5

3.0

2.5

2.0

1.5

1.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

10.70010.50010.300 10.900 11.100

1

2

3

4

5

6

7

0

SFELF10M7DF00-B0

4.5

4.0

3.5

3.0

2.5

2.0

1.5

1.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.300 10.500 10.700 10.900 11.100

■ Frequency Characteristics (Spurious)

SFELF10M7EA00-B0

0

10

20

30

40

50

60

70

8.700 9.700 10.700 11.700 12.700

Frequency (MHz)

Attenuation (dB)

SFELF10M7DF00-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

P50E.pdf

May.23,2011

28

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

Narrow Bandwidth Type SFVLF/SFKLF/SFELF Series

■ Features

SFELF10M7LFTA/KAH0, SFVLF/SFKLF series realizes

narrower band characteristics not obtained by

conventional ceramic filters. In addition, low spurious

and temperature characteristics are stable. This series

is suitable for European car-audio or AM conversion

use that needs narrow band characteristics.

As part of the environment protection activity, solder

for terminal plating and terminal-element connection

inside of ceramic filter contain no lead (Pb).

MARKING

7.0±2.0

2.5±0.2

0.5±0.1

1.4±0.1

1.65±0.1

2.5±0.2

7.0±2.05.0±1.03.0±1.0

0.3±0.1

(3) (2) (1)

EIAJ

CODE

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFVLF10M7MF00-B0

MARKING

7.0±2.0

2.5±0.2

0.5±0.1

1.4±0.1

1.65±0.1

2.5±0.2

7.0±2.05.0±1.03.0±1.0

0.3±0.1

(3) (2) (1)

EIAJ

CODE

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFVLF10M7LF00-B0

(1)

(2)

(3)

10.0±2.0

5.0±1.0

3.5

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

10.0±2.0

M A R K I N G

E I A J

C O D E

+1.5

–1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFKLF10M7NL00-B0

(1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7LFTA-B0

(1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7KAH0-B0

Part Number Center

Frequency

(fo) (MHz)

Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

Input/Output

Impedance

(ohm)

SFVLF10M7MF00-B0

- 10.700 fn±13 min. 135 max. 5.0 ±2.0dB 35 min.

[within 9MHz to fn] 35 min.

[within fn to 12MHz] 330

SFVLF10M7LF00-B0

- 10.700 fn±25 min. - 5.5 ±2.5dB 30 min.

[within 9MHz to fn] 30 min.

[within fn to 12MHz] 330

SFKLF10M7NL00-B0

10.700

±15kHz - 20 min. 95 max. 6.0 max. 24 min.

[within fo-1MHz to fo] 24 min.

[within fo to fo+1MHz] 600

SFELF10M7LFTA-B0

- 10.700 fn±25 min. 280 max. 7.0 ±2.0dB 30 min.

[within 9MHz to fn] 30 min.

[within fn to 12MHz] 330

Continued on the following page.

P50E.pdf

May.23,2011

29

8

Continued from the preceding page.

Area of Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

■ Standard Center Frequency Rank Code (SFELF10M7KAH0-B0)

CODE

D

B

A

C

E

Z

M

30kHz Step

10.64MHz±30kHz

10.67MHz±30kHz

10.70MHz±30kHz

10.73MHz±30kHz

10.76MHz±30kHz

25kHz Step

10.650MHz±25kHz

10.675MHz±25kHz

10.700MHz±25kHz

10.725MHz±25kHz

10.750MHz±25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A, B, C, D, E

Combination A, B, C

■ Test Circuit

(1) (2) (3)

C

S.S.G

RF

Rg

R1

R2

Rg + R1 = R2 = Input and Output Impedance

C = 10pF (Including stray capacitance and input

capacitance of RF voltmeter.)

Voltmeter

(1) : Input

(2) : Ground

(3) : Output

■ Frequency Characteristics

SFVLF10M7MF00-B0

19.0

18.0

17.0

16.0

15.0

14.0

13.0

12.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.600 10.650 10.700 10.750 10.800

SFVLF10M7LF00-B0

15.0

14.0

13.0

12.0

11.0

10.0

9.0

8.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.600 10.650 10.700 10.750 10.800

Continued on the following page.

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Part Number Center

Frequency

(fo) (MHz)

Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

Input/Output

Impedance

(ohm)

SFELF10M7KAH0-B0

10.700

±30kHz - 110 ±30kHz 350 max. 7.0 ±2.0dB 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] 330

Area of Attenuation: [within 20dB]

SFKLF10M7NL00-B0

Frequency (MHz)

Attenuation (dB)

10.70010.65010.600 10.750 10.800

1

2

3

4

5

6

7

0

SFELF10M7LFTA-B0

12.0

11.0

10.0

9.0

8.0

7.0

6.0

5.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.600 10.650 10.700 10.750 10.800

P50E.pdf

May.23,2011

30

8

Continued from the preceding page.

■ Frequency Characteristics

SFELF10M7KAH0-B0

8.0

7.5

7.0

6.5

6.0

5.5

5.0

4.5

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

10.70010.65010.600 10.750 10.800

1

2

3

4

5

6

7

0

■ Frequency Characteristics (Spurious)

SFVLF10M7MF00-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFVLF10M7LF00-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFKLF10M7NL00-B0

9.700

60

Frequency (MHz)

Attenuation (dB)

10.200 10.700 11.200 11.700

50

20

30

40

70

0

10

SFELF10M7LFTA-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

SFELF10M7KAH0-B0

10

20

30

40

50

60

0

70

8.700 9.700 10.700 11.700 12.700

Frequency (MHz)

Attenuation (dB)

P50E.pdf

May.23,2011

31

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

For FM-IF Tuners SFELF Series

SFELF10M7 series for FM receivers are monolithic type

ceramic filters which use the thickness expander mode

of the piezoelectric ceramic.

As part of the environment protection activity, solder

for terminal plating and terminal-element connection

inside of ceramic filter contain no lead (Pb).

■ Features

1. Little dispersion of amplitude characteristics and

phase characteristics (GDT characteristics)

2. The SFELF_G series is based on SFELF_FA00/GA00/HA00,

and it obtains high selectivity with low loss.

There is little dispersion of amplitude and GDT

characteristics, and low distortion rate can be

obtained.

3. The flatness of GDT is inspected for all products.

(1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7HA0G-B0

(1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7GA0G-B0

(1)

(2)

(3)

7.0±2.0

5.0±1.0

2.5±0.2

0.5±0.1

1.7±0.1

0.3±0.1

1.38±0.2

2.5±0.2

7.0±2.0

M A R K I N G

E I A J

C O D E

3.0±1.0

(in mm)

(1) : Input

(2) : Ground

(3) : Output

SFELF10M7FA0G-B0

Part Number Center

Frequency

(fo) (MHz)

3dB

Bandwidth

(kHz)

Attenuation

(kHz) Insertion Loss

(dB)

Spurious

Attenuation

(1) (dB)

Spurious

Attenuation

(2) (dB)

GDT Bandwidth

(kHz)

Input/Output

Impedance

(ohm)

SFELF10M7HA0G-B0

10.700

±30kHz 180 ±40kHz 520 max. 7.0 max. 40 min.

[within 9MHz to fo] 40 min.

[within fo to 12MHz] fo±45 min.

[within 0.5µsec.] 330

SFELF10M7GA0G-B0

10.700

±30kHz 230 ±50kHz 600 max. 7.0 max. 40 min.

[within 9MHz to fo] 40 min.

[within fo to 12MHz] fo±60 min.

[within 0.5µsec.] 330

SFELF10M7FA0G-B0

10.700

±30kHz 280 ±50kHz 650 max. 4.0 ±2.0dB 30 min.

[within 9MHz to fo] 30 min.

[within fo to 12MHz] fo±85 min.

[within 0.5µsec.] 330

Area of Attenuation: [within 20dB]

Area of Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

P50E.pdf

May.23,2011

32

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Standard Center Frequency Rank Code

CODE

D

B

A

C

E

Z

M

30kHz Step

10.64MHz±30kHz

10.67MHz±30kHz

10.70MHz±30kHz

10.73MHz±30kHz

10.76MHz±30kHz

25kHz Step

10.650MHz±25kHz

10.675MHz±25kHz

10.700MHz±25kHz

10.725MHz±25kHz

10.750MHz±25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A, B, C, D, E

Combination A, B, C

■ Test Circuit

(1) (2) (3)

C

S.S.G

RF

Rg

R1

R2

Rg + R1 = R2 = Input and Output Impedance

C = 10pF (Including stray capacitance and input

capacitance of RF voltmeter.)

Voltmeter

(1) : Input

(2) : Ground

(3) : Output

■ Frequency Characteristics

SFELF10M7HA0G-B0

6.5

6.0

5.5

5.0

4.5

4.0

3.5

3.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.400 10.500 10.600 10.700 10.800 10.900 11.000

SFELF10M7GA0G-B0

6.0

5.5

5.0

4.5

4.0

3.5

3.0

2.5

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.400 10.500 10.600 10.700 10.800 10.900 11.000

SFELF10M7FA0G-B0

5.5

5.0

4.5

4.0

3.5

3.0

2.5

2.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

10.400 10.500 10.600 10.700 10.800 10.900 11.000

P50E.pdf

May.23,2011

33

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Frequency Characteristics (Spurious)

SFELF10M7HA0G-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFELF10M7GA0G-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

SFELF10M7FA0G-B0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

P50E.pdf

May.23,2011

CERAFILr 10.7MHz Related Data on Lead Type

34

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Temperature Characteristics

SFELF10M7GA00-B0

Y20

Y40

Y20

0

W20

W40

0W20

Temperature (˚C)W40 W60 W80

Center frequency

Y20

Y2

Y1

0

W1

W2

0W20

Temperature (˚C)W40 W60 W80

Insertion loss

Y20

Y40

Y20

0

W20

W40

0W20

Temperature (˚C)W40 W60 W80

3dB Bandwidth

Variation (kHz)Variation (dB)Variation (kHz)

SFELF10M7HA00-B0

Y20

Y40

Y20

0

W20

W40

0W20 W40 W60 W80

Y20

Y2

Y1

0

W1

W2

0W20 W40 W60 W80

Y20

Y40

Y20

0

W20

W40

0W20 W40 W60 W80

Temperature (˚C)

Center frequency

Temperature (˚C)

Insertion loss

Temperature (˚C)

3dB Bandwidth

Variation (kHz)Variation (dB)Variation (kHz)

■ Matching Conditions

■ Loaded Resistance and Waveform (Rg+R1=330 ohm)

SFELF10M7GA00-B0

7

6

5

4

3

2

1

0 1.2

1.0

0.8

0.6

0.4

0.2

0

10.7 10.8 10.910.610.5

7

6

5

4

3

2

1

0 1.2

1.0

0.8

0.6

0.4

0.2

0

10.7 10.8 10.910.610.5

7

6

5

4

3

2

1

0 1.2

1.0

0.8

0.6

0.4

0.2

0

10.7 10.8 10.910.610.5

7

6

5

4

3

2

1

0 1.2

1.0

0.8

0.6

0.4

0.2

0

10.7 10.8 10.910.610.5

R2=220ΩR2=330Ω

R2=560ΩR2=1kΩ

Attenuation (dB)Attenuation (dB)

Frequency (MHz)

Group Delay Time (µsec.)Group Delay Time (µsec.)

■ Loaded Capacitance and Waveform (Rg+R1=R2=330 ohm)

SFELF10M7HA00-B0

7

6

5

4

3

2

1

0 1.2

1.0

0.8

0.6

0.4

0.2

0

10.7 10.8 10.910.610.5

7

6

5

4

3

2

1

0 1.2

1.0

0.8

0.6

0.4

0.2

0

10.7 10.8 10.910.610.5

7

6

5

4

3

2

1

0 1.2

1.0

0.8

0.6

0.4

0.2

0

10.7 10.8 10.910.610.5

7

6

5

4

3

2

1

0 1.2

1.0

0.8

0.6

0.4

0.2

0

10.7 10.8 10.910.610.5

C=10pF C=33pF

C=56pF C=82pF

Attenuation (dB)Attenuation (dB)

Frequency (MHz)

Group Delay Time (µsec.)Group Delay Time (µsec.)

•When using ceramic filters, it is most important to

match the input/output load to impedance 330 ohm

(SFELF10M7DF00-B0 is 470 ohm and

SFKLF10M7NL00-B0 is 600 ohm matching).

Waveform symmetry is damaged when reactance is added

to the input/output load.

•Two ceramic filters directly connected can be used

for high selectivity. For reducing waveform

variation, it is recommended to input a buffer AMP

between ceramic filters.

•The SFELF10M7 series are of input/output symmetric

structure so that in theory there is no input/output

directionality. Actual circuits may use different

input/output loading conditions (for example,

mismatched impedance) or capacitance load. In such

cases, the waveform will be a little changed by the

direction of the input/output of the ceramic filters.

P50E.pdf

May.23,2011

35

10

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (CERAFILr 2.3-6.5MHz) for Audio/Visual Equipment

4.5-6.5MHz Chip Type SFSKA Series

SMD ceramic filter SFSKA_CF is a small and thin SMD

filter sealed with a metal cap.

Recommended for LCD-TVs, and small and thin tuners.

■ Features

1. High attenuation outside bandwidth

2. Small and thin package

3. Reflow-solderable (1) : Input

(2) : Ground

(3) : Output

7.9±0.2 3.0±0.1

8.5±0.2 3.8±0.2

1.8±0.2

0.5±0.1

0.6±0.2 1.0±0.1

1.3±0.2

2.5±0.2 2.5±0.2

0.3±0.1

1.3±0.2

(1) (2) (3) (in mm)

Part Number Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

20dB

Bandwidth

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation(1)

(dB)

Spurious

Attenuation(2)

(dB)

Input/Output

Impedance

(ohm)

SFSKA4M50CF00-R3 4.500 fn±60 min. 600 max. 6.0 max. 20 min.

[within 0 to fn] 15 min.

[within fn to 7.0MHz] 1000

SFSKA5M50CF00-R3 5.500 fn±60 min. 600 max. 6.0 max. 25 min.

[within 0 to fn] 15 min.

[within fn to 7.0MHz] 600

SFSKA6M00CF00-R3 6.000 fn±60 min. 600 max. 6.0 max. 25 min.

[within 0 to fn] 15 min.

[within fn to 7.5MHz] 470

SFSKA6M50CF00-R3 6.500 fn±60 min. 600 max. 6.0 max. 25 min.

[within 0 to fn] 15 min.

[within fn to 8.5MHz] 470

Area of Insertion Loss: at minimum loss point

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

■ Standard Land Pattern Dimensions

1.0 1.0

1.5 1.5

4.8

1.0

(in mm)

■ Test Circuit

SFSKA4M50CF00-R3

E2

C2

R2 RF

Voltmeter

Rg

E1

R1

S.S.G.

(1) (2) (3)

R1+Rg=R2=1000Ω ±5%, Rg=50Ω

C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)

E1:S.S.G. Output voltage

(1) :

(2) :

(3) :

Input

Ground

Output

Continued on the following page.

P50E.pdf

May.23,2011

36

10

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Test Circuit

SFSKA5M50CF00-R3

E2

C2

R2 RF

Voltmeter

Rg

E1

R1

S.S.G.

(1) (2) (3)

R1+Rg=R2=600Ω ±5%, Rg=50Ω

C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)

E1: S.S.G. Output voltage

(1) :

(2) :

(3) :

Input

Ground

Output

SFSKA6M00CF00-R3

E2

C2

R2 RF

Voltmeter

Rg

E1

R1

S.S.G.

(1) (2) (3)

R1+Rg=R2=470Ω ±5%, Rg=50Ω

C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)

E1: S.S.G. Output voltage

(1) :

(2) :

(3) :

Input

Ground

Output

SFSKA6M50CF00-R3

E2

C2

R2 RF

Voltmeter

Rg

E1

R1

S.S.G.

(1) (2) (3)

R1+Rg=R2=470Ω ±5%, Rg=50Ω

C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)

E1: S.S.G. Output voltage

(1) :

(2) :

(3) :

Input

Ground

Output

■ Frequency Characteristics

SFSKA4M50CF00-R3

3.5 3.93.7 4.1 4.5 4.9 5.34.3

Attenuation (dB)

4.7

Frequency (MHz)

5.1 5.5

0

10

20

30

40

50

60

70

SFSKA5M50CF00-R3

4.5 4.7 4.9 5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKA6M00CF00-R3

5.0 5.2 5.4 5.6 5.8 6.0 6.2 6.4 6.6 6.8 7.0

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKA6M50CF00-R3

5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

P50E.pdf

May.23,2011

37

10

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Frequency Characteristics (Spurious)

SFSKA4M50CF00-R3

0.0 2.0 4.0

Attenuation (dB)

6.0

Frequency (MHz)

8.0 10.0

0

10

20

30

40

50

60

70

SFSKA5M50CF00-R3

0 2.0 4.0 6.0 8.0 10.0

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKA6M00CF00-R3

0 2.0 4.0 6.0 8.0 10.0

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKA6M50CF00-R3

0 2.0 4.0 6.0 8.0 10.0

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

P50E.pdf

May.23,2011

38

11

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (CERAFILr 2.3-6.5MHz) for Audio/Visual Equipment

2.3-5.7MHz Chip Type SFSKB Series

The SFSKB series are SMD ceramic filters which are

suitable for IR headphone applications.

Center frequencies of 2.3, 2.8, 3.2, 3.8, 4.3, 4.8,

5.2, 5.7MHz are available.

Realized Small, thin and lightweight package,

compared with conventional LC filters.

It helps to compose multi channel circuit on one PCB.

No frequency adjustment is required on PCB and it

contributes reduction of production cost.

■ Features

1. SMD package in plastic emboss tape, available

for automatic placing.

2. They are slim, at only 1.5mm max. thickness,

and have a small mounting area (5.2x3.8mm) enabling

flexible PCB design.

3. Available for lead (Pb) free re-flow soldering process.

4. Operating temperature range: 0 to +70 (degrees C)

Storage temperature range: -55 to +85 (degrees C)

5. No frequency adjustment is required in production process.

6. Small, thin and lightweight package compared with

conventional LC filters

■ Applications

1. IR headphone

2. Set Top Box for satellite broadcasting

(in mm)

∗

5.2±0.1

(0.1) 1.5±0.1

0.3±0.1

(2.0) 4-0.35

(4.93)

0.25±0.1

4-0.35 (3.5)

3.8±0.1

(1.6)

1.0±0.1

(0.1) 1.35±0.15

Terminal Connection

(1) : Input

(2) : Output

(3) : Ground

(4) : Terminal for external

capacitor

∗ : EIAJ Monthly Code

Tolerance unless otherwise

specified : ±0.1mm

( ) : Reference

(1)

(2)

(4)

(3)

(2)

(4)

(3)

Part Number Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

20dB

Bandwidth

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation(1)

(dB)

Spurious

Attenuation(2)

(dB)

Input/Output

Impedance

(ohm)

SFSKB2M30GF00-R1 2.300 fn±75 min. 650 max. 6.0 max. 25 min.

[within 1.3 to 1.8MHz] 23 min.

[within 2.8 to 3.3MHz] 1000

SFSKB2M80GF00-R1 2.800 fn±75 min. 650 max. 6.0 max. 25 min.

[within 1.8 to 2.3MHz] 25 min.

[within 3.3 to 3.8MHz] 1000

SFSKB3M20FF00-R1 3.200 fn±75 min. 650 max. 6.0 max. 30 min.

[within 2.2 to 2.8MHz] 30 min.

[within 3.8 to 4.2MHz] 1000

SFSKB3M80GF00-R1 3.800 fn±75 min. 650 max. 6.0 max. 30 min.

[within 2.8 to 3.2MHz] 30 min.

[within 4.3 to 4.8MHz] 1000

SFSKB4M30GF00-R1 4.300 fn±75 min. 650 max. 6.0 max. 30 min.

[within 3.3 to 3.8MHz] 30 min.

[within 4.8 to 5.3MHz] 1000

SFSKB4M80GF00-R1 4.800 fn±75 min. 650 max. 6.0 max. 30 min.

[within 3.8 to 4.3MHz] 30 min.

[within 5.2 to 5.8MHz] 1000

SFSKB5M20GF00-R1 5.200 fn±75 min. 650 max. 6.0 max. 30 min.

[within 4.2 to 4.8MHz] 30 min.

[within 5.7 to 6.2MHz] 1000

SFSKB5M70GF00-R1 5.700 fn±75 min. 650 max. 6.0 max. 30 min.

[within 4.7 to 5.2MHz] 30 min.

[within 6.2 to 6.7MHz] 1000

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

P50E.pdf

May.23,2011

39

11

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Standard Land Pattern Dimensions

(in mm)

1.8 2.0 1.8

1.3 1.6 1.3

■ Test Circuit

SFSKB2M30GF00-R1/SFSKB3MZ0GF00-R1

R1

Rg

S.S.G.

R2

Cc

C2

RF

Voltmeter

(1)

(3)

(4)

(2)

E2

E1

R1+Rg=R2=1.0kΩ

Cc=22pF±5%

C2=10pF (Including stray capacitance and

Input capacitance of RF Voltmeter)

E1 : S.S.G. Output Voltage

(1) : Input

(2) : Output

(3) : Ground

(4) : Terminal for external capacitor

SFSKB2M80GF00-R1/SFSKB3M20FF00-R1

R1

Rg

S.S.G.

R2

Cc

C2

RF

Voltmeter

(1)

(3)

(4)

(2)

E2

E1

R1+Rg=R2=1.0kΩ

Cc=39pF±5%

C2=10pF (Including stray capacitance and

Input capacitance of RF Voltmeter)

E1 : S.S.G. Output Voltage

(1) : Input

(2) : Output

(3) : Ground

(4) : Terminal for external capacitor

SFSKB4M30GF00-R1/SFSKB5M70GF00-R1

R1

Rg

S.S.G.

R2

Cc

C2

RF

Voltmeter

(1)

(3)

(4)

(2)

E2

E1

R1+Rg=R2=1.0kΩ

Cc=33pF±5%

C2=10pF (Including stray capacitance and

Input capacitance of RF Voltmeter)

E1 : S.S.G. Output Voltage

(1) : Input

(2) : Output

(3) : Ground

(4) : Terminal for external capacitor

SFSKB4M80GF00-R1

R1

Rg

S.S.G.

R2

Cc

C2

RF

Voltmeter

(1)

(3)

(4)

(2)

E2

E1

R1+Rg=R2=1.0kΩ

Cc=15pF±5%

C2=10pF (Including stray capacitance and

Input capacitance of RF Voltmeter)

E1 : S.S.G. Output Voltage

(1) : Input

(2) : Output

(3) : Ground

(4) : Terminal for external capacitor

SFSKB5M20GF00-R1

R1

Rg

S.S.G.

R2

Cc

C2

RF

Voltmeter

(1)

(3)

(4)

(2)

E2

E1

R1+Rg=R2=1.0kΩ

Cc=27pF±5%

C2=10pF (Including stray capacitance and

Input capacitance of RF Voltmeter)

E1 : S.S.G. Output Voltage

(1) : Input

(2) : Output

(3) : Ground

(4) : Terminal for external capacitor

P50E.pdf

May.23,2011

40

11

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Frequency Characteristics

SFSKB2M30GF00-R1

1.300 2.3001.800 2.800 3.300

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB2M80GF00-R1

1.800 2.8002.300 3.300 3.800

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB3M20FF00-R1

2.200 3.2002.700 3.700 4.200

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB3M80GF00-R1

2.800 3.8003.300 4.300 4.800

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB4M30GF00-R1

3.300 4.3003.800 4.800 5.300

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB4M80GF00-R1

3.800 4.8004.300 5.300 5.800

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB5M20GF00-R1

4.200 5.2004.700 5.700 6.200

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

SFSKB5M70GF00-R1

4.700 5.7005.200 6.200 6.700

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

P50E.pdf

May.23,2011

41

11

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Frequency Characteristics (Spurious)

SFSKB2M30GF00-R1

0.300 1.300 2.300

Attenuation (dB)

3.300

Frequency (MHz)

4.300

0

10

20

30

40

50

60

70

SFSKB2M80GF00-R1

0.800 1.800 2.800

Attenuation (dB)

3.800

Frequency (MHz)

4.800

0

10

20

30

40

50

60

70

SFSKB3M20FF00-R1

1.200 2.200 3.200

Attenuation (dB)

4.200

Frequency (MHz)

5.200

0

10

20

30

40

50

60

70

SFSKB3M80GF00-R1

1.800 2.800 3.800

Attenuation (dB)

4.800

Frequency (MHz)

5.800

0

10

20

30

40

50

60

70

SFSKB4M30GF00-R1

2.300 3.300 4.300

Attenuation (dB)

5.300

Frequency (MHz)

6.300

0

10

20

30

40

50

60

70

SFSKB4M80GF00-R1

2.800 3.800 4.800

Attenuation (dB)

5.800

Frequency (MHz)

6.800

0

10

20

30

40

50

60

70

SFSKB5M20GF00-R1

3.200 4.200 5.200

Attenuation (dB)

6.200

Frequency (MHz)

7.200

0

10

20

30

40

50

60

70

SFSKB5M70GF00-R1

3.700 4.700 5.700

Attenuation (dB)

6.700

Frequency (MHz)

7.700

0

10

20

30

40

50

60

70

P50E.pdf

May.23,2011

42

12

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment

Chip Type SFPKA Series

SFPKA series for AM use is one of the most

recommendable intermediate filters, having such

distinctive features as high selectivity, high

stability and adjustment-free operation.

Additionally, its easy matching with IC helps create an

easy circuit design.

■ Features

1. The filters are mountable by automatic placers

and can be reflow soldered and withstand

washing.

2. The filters are wide bandwidth and high

selectivity, so they are suitable for car radio

and multi-band radio.

7.5±0.3

5.0 max.

3.0±0.3

8.4 max.

2.0±0.3

1.5±0.3

7.0±0.3

0.9±0.1

MARKING

EIAJ

CODE

2.0±0.3

(1) (2) (3)

1.5±0.3 1.6±0.3Connection

(1) : Input

(2) : Ground

(3) : Output

(in mm)

Part Number Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Selectivity (-)

(dB) Selectivity (+)

(dB)

Insertion

Loss

(dB)

Input/Output

Impedance

(ohm) Element

SFPKA450KH1A-R1 450.0 ±1.0kHz fn±3.0 min. 40 min.[fn-9kHz] 40 min.[fn+9kHz] 6.0 max. 2000 4

SFPKA450KG1A-R1 450.0 ±1.0kHz fn±4.5 min. 40 min.[fn-10kHz] 40 min.[fn+10kHz] 6.0 max. 1500 4

Area of Insertion Loss: at minimum loss point

Center frequency (fo) is defined by the center of 6dB bandwidth.

(fn) means nominal center frequency (450kHz).

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

■ Standard Land Pattern Dimensions

(in mm)

2.02.475 6.95

1.61.55 7.45 0.80.9

0.925 2.0 2.0

1.1

■ Recommended IFT

(1)

(2)

S(3) (4)S

(6)

Type

Item

Winding Specification

No load Qu

Tuning Capacitance

40

180pF

SFPKA

(1)—(2) (2)—(3) (4)—(6)

60T 125T 28T

(Bottom view)

• Matching of CERAFILr SFPKA series with IFT is decided by the Qu of IFT

and IFT secondary side impedance, |Z2|. Set the Qu at about 40 because

a Qu value which is too high (e.g.,90) may produce ripple in the waveform.

It is recommended to match the impedance of |Z2| with that of the

CERAFILr.

Continued on the following page.

P50E.pdf

May.23,2011

43

12

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Test Circuit

Rg+R1=R2=Input/Output Impedance

E1 : S.S.G. Output Voltage

E1

R1

Rg

S.S.G.

0dBm

(1)

(2)

(3)

R2 E2 RF Voltmeter

(1) : Input

(2) : Ground

(3) : Output

■ Frequency Characteristics

SFPKA450KH1A-R1

100

40

30

20

10

0

Attenuation (dB)

200

400

G.D.T. (µsec.)

425 450 475

Frequency (kHz)

90

80

70

60

50

360

280

320

240

160

120

80

40

0

SFPKA450KG1A-R1

100

40

30

20

10

0

Attenuation (dB)

0

200

400

G.D.T. (µsec.)

425 450 475

Frequency (kHz)

90

80

70

60

50

360

320

280

240

160

120

80

40

P50E.pdf

May.23,2011

44

13

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment

Lead Type SFPLA/CFWLA Series

SFPLA/CFWLA series for AM use is one of the most

suitable intermediate filters, having such

distinctive features as high selectivity, high

stability, high attenuation, and adjustment-free

operation. Additionally, its easy matching with IC

helps create an easy circuit design.

This is the most suitable for car-stereo and

all band radio with high attenuation.

3.0

±

0.3

7.0±0.3

4.2±0.3 7.3±0.3

0.8±0.1

0.6±0.1

1.2±0.5

8.0±0.3

MARKING

EIAJ

CODE

3.3±0.5

2.7

±

0.3

(1)(2)

(3)

0.3±0.1

1.5 max.

0.15±0.05

Connection

(1) : Input

(2) : Ground

(3) : Output

(in mm)

SFPLA Series

4.3±0.3

0.15

1.5 max.

2.3±0.5 2.0±0.3

2.9±0.3

11.0±0.5

MARKING

EIAJ

CODE

1.2±0.5

(1)(2)

(4) (3)

(5)

1.35±0.5

7.0±0.5

3.5±0.5

0.6±0.1

0.8±0.1

7.5±0.5

2.6±0.3

Connection

(1) : Input

(2)(3)(4) : Ground

(5) : Output

(in mm)

2.92.9——0.30.3

2.9±0.3

CFWLA Series

Part Number Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Selectivity (-)

(dB) Selectivity (+)

(dB)

Insertion

Loss

(dB)

Input/Output

Impedance

(ohm) Element

SFPLA450KJ1A-B0 450.0 ±1.0kHz fn±2.0 min. 40 min.[fn-7.5kHz] 40 min.[fn+7.5kHz] 6.0 max. 2000 4

SFPLA450KH1A-B0 450.0 ±1.0kHz fn±3.0 min. 40 min.[fn-9kHz] 40 min.[fn+9kHz] 6.0 max. 2000 4

CFWLA450KJFA-B0 450.0 (fn) fn±2.0 min. 50 min.[fn-7.5kHz] 50 min.[fn+7.5kHz] 7.0 max. 2000 6

CFWLA450KHFA-B0 450.0 (fn) fn±3.0 min. 50 min.[fn-9kHz] 50 min.[fn+9kHz] 6.0 max. 2000 6

Area of Insertion Loss: at minimum loss point

Center frequency (fo) is defined by the center of 6dB bandwidth.

(fn) means nominal center frequency (450kHz).

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

■ Recommended IFT

(1)

(2)

S(3) (4)S

(6)

Type

Item

Winding Specification

No load Qu

Tuning Capacitance

40

180pF

SFPLA/CFWLA

7×7mm IFT

(1)—(2) (2)—(3) (4)—(6)

60T 125T 28T

(Bottom view)

• Matching of CERAFILr SFPLA/CFWLA series with IFT is decided by the

Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at about 40

because a Qu value which is too high (e.g.,90) may produce ripple in the

waveform. It is recommended to match the impedance of |Z2| with that of

the CERAFILr.

■ Test Circuit

Input Output

R1

Rg

SSG

Ground

R2 RF

Voltmeter

Rg+R1 =R2 : Input/Output Impedance

Continued on the following page.

P50E.pdf

May.23,2011

45

13

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Frequency Characteristics

IFT+SFPLA450KH1A-B0

0

10

20

30

40

50

60

70

Attenuation (dB)

430 440 450 460 470

Frequency (kHz)

IFT+CFWLA450KHFA-B0

70

60

50

40

30

20

10

0

430 440 450 460 470

Frequency (kHz)

Attenuation (dB)

■ Frequency Characteristics (Spurious)

IFT+SFPLA450KH1A-B0

70

60

80

50

40

30

20

10

0

012345678910

Frequency (MHz)

Attenuation (dB)

IFT+CFWLA450KHFA-B0

70

60

80

50

40

30

20

10

0

012345678910

Frequency (MHz)

Attenuation (dB)

P50E.pdf

May.23,2011

46

14

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment

For AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series

SFPLA/CFULA/CFWLA series for AM use is one of the most

suitable intermediate filters, having such

distinctive features as high selectivity, high

stability, high attenuation, and adjustment-free

operation. Additionally, its easy matching with IC

helps create an easy circuit design.

Especially, CFULA/CFWLA_Y series is the frequency

fidelity in the high sound area of an AM stereo will

be improved with wide band, flat group delay time

characteristics.

3.0

±

0.3

7.0±0.3

4.2±0.3 7.3±0.3

0.8±0.1

0.6±0.1

1.2±0.5

8.0±0.3

MARKING

EIAJ

CODE

3.3±0.5

2.7

±

0.3

(1)(2)

(3)

0.3±0.1

1.5 max.

0.15±0.05

Connection

(1) : Input

(2) : Ground

(3) : Output

(in mm)

SFPLA Series

4.3±0.3

0.15

1.5 max.

2.3±0.5 2.0±0.3

2.9±0.3

11.0±0.5

MARKING

EIAJ

CODE

1.2±0.5

(1)(2)

(4) (3)

(5)

1.35±0.5

7.0±0.5

3.5±0.5

0.6±0.1

0.8±0.1

7.5±0.5

2.6±0.3

Connection

(1) : Input

(2)(3)(4) : Ground

(5) : Output

(in mm)

2.92.9——0.30.3

2.9±0.3

CFWLA Series

3.0±0.3 7.0±0.3

4.2±0.3 7.3±0.3

0.8±0.1

0.6±0.1

1.2±0.5

8.0±0.3

MARKING

EIAJ

CODE

3.3±0.5

2.7±0.3

(1)(2)

(3)

0.3±0.1

1.5 max.

0.15±0.05

Connection

(1) : Input

(2) : Ground

(3) : Output

(in mm)

CFULA Series

Part Number Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Selectivity (-)

(dB) Selectivity (+)

(dB)

Insertion

Loss

(dB)

GDT 20µsec.

Bandwidth

(kHz)

Input/Output

Impedance

(ohm) Element

SFPLA450KG1A-B0 450.0 ±1.0kHz fn±4.5 min. 30 min.[fn-9kHz] 30 min.[fn+9kHz] 6.0 max. - 2000 4

SFPLA450KF1A-B0 450.0 ±1.0kHz fn±6.0 min. 40 min.[fn-12.5kHz] 40 min.[fn+12.5kHz] 6.0 max. - 2000 4

SFPLA450KE1A-B0 450.0 ±1.0kHz fn±7.5 min. 40 min.[fn-15kHz] 40 min.[fn+15kHz] 6.0 max. - 1500 4

SFPLA450KD1A-B0 450.0 ±1.0kHz fn±10.0 min. 40 min.[fn-20kHz] 40 min.[fn+20kHz] 4.0 max. - 1500 4

CFULA450KG1Y-B0 450.0 ±1.0kHz fn±4.5 min. 40 min.[fn-15kHz] 40 min.[fn+15kHz] 10.0 max. fn±3 2000 4

CFULA450KF1Y-B0 450.0 ±1.0kHz fn±6.0 min. 40 min.[fn-17.5kHz] 40 min.[fn+17.5kHz] 9.0 max. fn±4 2000 4

CFULA450KD1Y-B0 450.0 ±1.0kHz fn±10.0 min. 40 min.[fn-25kHz] 40 min.[fn+25kHz] 7.0 max. fn±7 1500 4

CFWLA450KG1Y-B0 450.0 ±1.0kHz fn±4.5 min. 50 min.[fn-15kHz] 50 min.[fn+15kHz] 11.0 max. fn±4 2000 6

CFWLA450KF1Y-B0 450.0 ±1.0kHz fn±6.0 min. 50 min.[fn-17.5kHz] 50 min.[fn+17.5kHz] 10.0 max. fn±5 2000 6

CFWLA450KD1Y-B0 450.0 ±1.0kHz fn±10.0 min. 50 min.[fn-25kHz] 50 min.[fn+25kHz] 8.0 max. fn±8 1500 6

CFWLA450KGFA-B0 450.0 (fn) fn±4.5 min. 50 min.[fn-10kHz] 50 min.[fn+10kHz] 6.0 max. - 2000 6

CFWLA450KFFA-B0 450.0 (fn) fn±6.0 min. 50 min.[fn-12.5kHz] 50 min.[fn+12.5kHz] 6.0 max. - 2000 6

CFWLA450KEFA-B0 450.0 (fn) fn±7.5 min. 50 min.[fn-15kHz] 50 min.[fn+15kHz] 6.0 max. - 1500 6

CFWLA450KDFA-B0 450.0 (fn) fn±10.0 min. 50 min.[fn-20kHz] 50 min.[fn+20kHz] 4.0 max. - 1500 6

Area of Insertion Loss: at minimum loss point

Center frequency (fo) is defined by the center of 6dB bandwidth.

(fn) means nominal center frequency (450kHz).

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

P50E.pdf

May.23,2011

47

14

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Recommended IFT

(1)

(2)

S(3) (4)S

(6)

Type

Item

Winding Specification

No load Qu

Tuning Capacitance

40

180pF

SFPLA/CFULA/CFWLA

7×7mm IFT

(1)—(2) (2)—(3) (4)—(6)

60T 125T 28T

(Bottom view)

• Matching of CERAFILr SFPLA/CFULA/CFWLA series with IFT is decided

by the Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at

about 40 because a Qu value which is too high (e.g.,90) may produce

ripple in the waveform. It is recommended to match the impedance of |Z2|

with that of the CERAFILr.

■ Test Circuit

Input Output

R1

Rg

SSG

Ground

R2 RF

Voltmeter

Rg+R1 =R2 : Input/Output Impedance

■ Frequency Characteristics

IFT+SFPLA450KF1A-B0

0

10

20

30

40

50

60

70

Attenuation (dB)

430 440 450 460 470

Frequency (kHz)

IFT+CFWLA450KFFA-B0

70

60

50

40

30

20

10

0

430 440 450 460 470

Frequency (kHz)

Attenuation (dB)

IFT+CFULA450KF1Y-B0

70

60

50

40

30

20

10

0

430 440 450 460 470

200

100

0

Group Delay Time (µsec.)

Frequency (kHz)

Attenuation (dB)

IFT+CFWLA450KF1Y-B0

70

60

50

40

30

20

10

0

430 440 450 460 470

200

100

0

Group Delay Time (µsec.)

Frequency (kHz)

Attenuation (dB)

CERAFILr 455kHz SFp Series Temperature Characteristics

48

14

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ SFPLA450KH1A-B0

-

20 020 40 60 80

-

1

0

+1

-

20

020 40

60 80

-

1

0

-

1

+1

-

20 0

20 40 60 80

0

+1

Center Frequency

(kHz)

3dB Bandwidth

(kHz)

Insertion Los

(dB)

Temperature (D)

P50E.pdf

May.23,2011

P50E.pdf

May.23,2011

49

15

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (Ceramic Trap) for Audio/Visual Equipment

4.5-6.5MHz Chip Type TPSKA Series

SMD ceramic trap TPSKA_B is a small and thin SMD trap

sealed with a metal cap. Recommended for LCD-TVs, and

small and thin tuners.

■ Features

1. High attenuation and high performance group

delay time

2. Small and thin package

3. Reflow-solderable (1) : Input

(2) : Ground

(3) : Output

7.9±0.2 3.0±0.1

8.5±0.2 3.8±0.2

1.8±0.2

0.5±0.1

0.6±0.2 1.0±0.1

1.3±0.2

2.5±0.2 2.5±0.2

0.3±0.1

1.3±0.2

(1) (2) (3)

(in mm)

Part Number Nominal Center Frequency (fn1)

(MHz) Attenuation (at fn1)

(dB) 30dB Attenuation BW (fn1)

(kHz)

TPSKA4M50B00-R3 4.500 35 min. 50 min.

TPSKA5M50B00-R3 5.500 35 min. 70 min.

TPSKA6M00B00-R3 6.000 35 min. 70 min.

TPSKA6M50B00-R3 6.500 35 min. 70 min.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

■ Standard Land Pattern Dimensions

1.0 1.0

1.5 1.5

4.8

1.0

(in mm)

■ Test Circuit

RF

Voltmeter

Rg

R1

L

S.S.G.

Rg=50Ω

R1=330Ω

R2=1.0kΩ

L=15µH

50ΩR2

■ Frequency Characteristics

TPSKA4M50B00-R3

Attenuation (dB)

Frequency (MHz)

4.0 4.24.1 4.3 4.5 4.7 4.94.4 4.6 4.8 5.0

0

10

20

30

40

50

60

70

TPSKA5M50B00-R3

Attenuation (dB)

Frequency (MHz)

5.0 5.25.1 5.3 5.5 5.7 5.95.4 5.6 5.8 6.0

0

10

20

30

40

50

60

70

Continued on the following page.

P50E.pdf

May.23,2011

50

15

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Frequency Characteristics

TPSKA6M00B00-R3

Attenuation (dB)

Frequency (MHz)

5.5 5.75.6 5.8 6.0 6.2 6.45.9 6.1 6.3 6.5

0

10

20

30

40

50

60

70

TPSKA6M50B00-R3

Attenuation (dB)

Frequency (MHz)

6.0 6.26.1 6.3 6.5 6.7 6.96.4 6.6 6.8 7.0

0

10

20

30

40

50

60

70

■ Frequency Characteristics (Spurious)

TPSKA4M50B00-R3

Attenuation (dB)

Frequency (MHz)

0 1.0 2.0 3.0 4.0 5.0

G.D.T. (nsec)

0

10

20

30

40

50

60

70

80

700

600

500

400

300

200

100

0

TPSKA5M50B00-R3

Attenuation (dB)

Frequency (MHz)

0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

G.D.T. (nsec.)

0

10

20

30

40

50

60

70

80

1000

800

600

400

200

0

TPSKA6M00B00-R3

Attenuation (dB)

Frequency (MHz)

0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

G.D.T. (nsec.)

0

10

20

30

40

50

60

70

80

1000

800

600

400

200

0

TPSKA6M50B00-R3

Attenuation (dB)

Frequency (MHz)

0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

G.D.T. (nsec.)

0

10

20

30

40

50

60

70

80

1000

800

600

400

200

0

P50E.pdf

May.23,2011

51

16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (Ceramic Discriminator) for Audio/Visual Equipment

10.7MHz Ultra Thin Chip Type CDSCB Series

CDSCB10M7 series forms a resonator on a piezoelectric

ceramic substrate. In combination with ICs, this type

obtains stable demodulation characteristics in a wide

bandwidth.

They have 1.0mm max. thickness and small mounting area

(4.5x2.0mm).

■ Features

1. Compact and high reliability and recommended for

automotive applications.

2. Can be combined with various ICs. The IC is

determined by the last number in the part number.

3. Stable demodulation characteristics can be

obtained without adjustment.

4. Stable temperature characteristics

5. Available lead (Pb) free solder reflow.

4.1 max.

1.0 max.

4.5±0.1

0.2±0.2

2.0±0.1

0.3±0.2

0.4(ref.) 0.4(ref.)

1.4 max.

0.4±0.05

1.5±0.1

0.8±0.10.8±0.1

1.5±0.1 (in mm)

Part Number Center

Frequency (fo)

(MHz)

Recovered

Audio 3dB BW

(kHz)

Recovered

Audio Output

(mV)

Distortion

(%) S Curve

(mV) IC

CDSCB10M7GA105A-R0 10.700 ±30kHz 220 min. 110 min. 1.5 max. - TEA5757HL

CDSCB10M7GA113-R0 10.700 ±30kHz 300 min. 110 min. 1.0 max. - TA2154FN

CDSCB10M7GA119-R0 10.700 ±30kHz 500 min. 75 min. 1.0 max. - TRF6901

CDSCB10M7GA121-R0 10.700 ±30kHz 390 min. 80 min. 1.0 max. - LV23100V

CDSCB10M7GA135-R0 10.700 ±30kHz 155 min. 75 min. - - TH71101

CDSCB10M7GA136-R0 10.700 ±30kHz 140 min. 120 min. - - TH7122

CDSCB10M7GF072-R0 10.700 (fn) fn±150 min. 130 min. 2.0 max. - TA31161

CDSCB10M7GF107S-R0 10.700 (fn) fn±80 min. 52 min. 3.0 max. - TA31272FN

CDSCB10M7GF109-R0 10.700 (fn) fn±100 min. 170 min. 3.0 max. - TK14588V

CDSCB10M7GF123-R0 10.700 (fn) - - - 900 min. TA31275FN

CDSCB10M7GF123S-R0 10.700 (fn) - - - 900 min. TA31275FN

CDSCB10M7GF126-R0 10.700 (fn) - - - 400 min. NJM2295AV

(fn) means nominal center frequency (10.700MHz).

For safety purposes, avoid applying a direct current between the terminals.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

■ Standard Center Frequency Rank Code

CODE

D

B

A

C

E

Z

M

30kHz Step

10.64MHz±30kHz

10.67MHz±30kHz

10.70MHz±30kHz

10.73MHz±30kHz

10.76MHz±30kHz

25kHz Step

10.650MHz±25kHz

10.675MHz±25kHz

10.700MHz±25kHz

10.725MHz±25kHz

10.750MHz±25kHz

Combination A, B, C, D, E

Combination A, B, C

Continued on the following page.

P50E.pdf

May.23,2011

52

16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Standard Land Pattern Dimensions

2.6

1.0 2.0 1.0

3.0

(in mm)

■ Test Circuit

CDSCB10M7GA105A-R0

48 41424344454647

13

12 20191817161514

4.7µ

X

150

S.S.G.

Vcc (3.0V)

0.1µ

0.47µ

TEA5757HL

(PHILIPS)

+

40

21

39

22

38

23

37

24

X : CDSCB10M7GA105A-R0

0.1µ

0.1µ10µ

100µ

10

100k

+

AFC (n)

AFC (p)

AF OUT

DC OUT

330p

0.22µ

11

10

9

8

7

6

5

4

3

2

1

25

26

27

28

29

30

31

32

33

34

35

36

0.1µ

Unit C

R: F

: Ω

CDSCB10M7GA113-R0

30 23242526272829

1 8765432

2.2µ

D.C. OUT

S.S.G.

Vcc (1.2V)

AF OUT

0.01µ

680p

TA2154FN (TOSHIBA)

+

22

9

21

10

20

11

19

12

18

13

17

14

16

15

X : CDSCB10M7GA113-R0

0.01µ

X

Unit C

R: F

: Ω

CDSCB10M7GA119-R0

0.01µ

0.01µ0.47µ

2.2µ0.1µ

0.1µ

0.22µ

4.7µ

120p

220k

68p

15p 82p

47p

1000p

100p

10k

1k

+

10

IF Input AF Output

Vcc (3.0V)

(TEXAS INSTRUMENTS)

TRF6901

PIC16F84

X

Unit C

R

L

: F

: Ω

: H

+

X : CDSCB10M7GA119-R0

1

2

3

4

5

6

7

8

9

10

11

12

36

35

34

33

32

31

30

29

28

27

26

25

13 14 15 16 17 18 19 20 21 22 23 24

48 47 46 45 44 43 42 41 40 39 38 37

18 17 16 15 14 13 12 11 10

1 2 3 4 5 6 7 8 9

CDSCB10M7GA121-R0

0.47µ

0.01µ

AF Output D.C. Output

LV23100V (SANYO)

PIC16F84 (Control IC)

10k

Vcc (3.2V)

1µ

0.047µ

2.2µ0.1µ

1k

0.047µ10k75

0.015µ0.01µ

100µ

10p

100p

10p

22µ

10µ

3.3k

+

1µ

+

S.G.

X

Unit C

R: F

: Ω

X : CDSCB10M7GA121-R0

36 35 34 33 32 31 30 2829 27 26 25 24 23 22 21 20 19

1 2 3 4 5 6 7 98 10 11 12 13 14 15 16 17 18

18

1

17

2

16

3

15

4

14

5

13

6

12

7

10

9

11

8

Continued on the following page.

P50E.pdf

May.23,2011

53

16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Test Circuit

CDSCB10M7GA135-R0

Unit C

R: F

: Ω

X: CDSCB10M7GA135-R0

123456789

10

11

12

13

14

15

16

1718192021222324

25

26

27

28

29

30

31

32

220k

0.01µ

1000p

0.1µ

0.01µ1000p100p

330p

0.033µ

12p

0.01µ

1000p

C.D.

330p10µ

+

S.G.

Vcc (5.0V)

TH71101, TH71102,

TH71111 or TH71112

(MELEXIS)

FKS-OUTAF-OUT

330k

CDSCB10M7GA136-R0

12345678

123456789

18 17 16 15 14 13 12 11 10

9

10

11

12

13

14

15

16

1718192021222324

25

26

27

28

29

30

31

32

Unit C

R: F

: Ω

X: CDSCB10M7GA136-R0

0.1µ

2.2µ

1k

100k

3.3k

+0.1µ

100p

10k

PIC16F84 (Control IC)

TH7122

[Internal AFC Enabled]

(MELEXIS)

Vcc (5.0V)

0.01µ

0.1µ0.01µ330p

330p 100k

330p

S.G. C.D.

FKS-OUT

AF-OUT

330p

0.01µ

CDSCB10M7GF072-R0

16

Vcc (3V)

9101112131415

1 8765432

IF IN

AF OUT

0.01µ

33µ0.01µ

R

10p

4.7µ

X

0.01µ

+

TA31161 (TOSHIBA)

X : CDSCB10M7GF072-R0

R : 820 Unit C

R

L

: F

: Ω

: H

CDSCB10M7GF109-R0

0.01µ

Vcc (3V)

12k 51k

1000p

8p

+

S.S.G.

R

D.C. OUT AF OUT

X

0.01µ

4.7µ

51

0.01µ

1.2µ

TK14588V (TOKO)

Unit C

R

L

: F

: Ω

: H

X : CDSCB10M7GF109-R0

R : 820

910111213141516

87654321

CDSCB10M7GF123-R0

Vcc (5.0V)

123456789101112

24 23 22 21 20 19 18 17 16 15 14 13

0.1µ

0.01µ

TA31275FN (TOSHIBA)

1000p

3300p

0.01µ

AF OUT

DC-OUT

0.01µ

0.1µ

0.1µ1.8k

0.01µ

X : CDSCB10M7GF123-R0

Unit C

R: F

: Ω

S.S.G.

CDSCB10M7GF126-R0

Vcc (5.0V)

12345678910

20 19 18 17 16 15 14 13 12 11

NJM2295AV (JRC)

0.01µ

DC-OUT

100p

0.01µ

10µ

0.01µ

10µ

180

8p

C.D.

0.01µ

X : CDSCB10M7GF126-R0

Unit C

R: F

: Ω

S.G.

+

10µ

+

10µ

+

P50E.pdf

May.23,2011

54

16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Recovered Audio Curve

CDSCB10M7GA105A-R0

AF Output Voltage (mV)

T.H.D. (%)

Frequency (MHz)

Input

fdev.

fmod.

Vcc

= 100dBµ

= ±75kHz

= 1kHz

= 3.0V

1

10

100

1000

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

0.1

1

10

100

AF Output

Distortion

CDSCB10M7GA113-R0

AF Output Voltage (mV)

T.H.D. (%)

Frequency (MHz)

Input

fdev.

fmod.

Vcc

= 100dBµ

= ±75kHz

= 1kHz

= 1.2V

1

10

100

1000

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

0.1

1

10

100

AF Output

Distortion

CDSCB10M7GA119-R0

AF Output Voltage (mV)

T.H.D. (%)

Frequency (MHz)

Input

fdev.

fmod.

Vcc

= 100dBµ

= ±60kHz

= 1kHz

= 3.0V

1

10

100

1000

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

0.1

1

10

100

AF Output

Distortion

CDSCB10M7GA121-R0

AF Output Voltage (mV)

T.H.D. (%)

Frequency (MHz)

Input

fdev.

fmod.

Vcc

= 100dBµ

= ±75kHz

= 1kHz

= 3.2V

1

10

100

1000

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

0.1

1

10

100

AF Output

Distortion

CDSCB10M7GA135-R0

AF Output Voltage (mV)

Frequency (MHz)

Input

fdev.

fmod.

Vcc

= 100dBµ

= ±50kHz

= 1kHz

= 5.0V

1

10

100

1000

10.4 10.5 10.6 10.7 10.8 10.9 11.0

0.1

CDSCB10M7GA136-R0

AF Output Voltage (mV)

Frequency (MHz)

Input

fdev.

fmod.

Vcc

= 100dBµ

= ±50kHz

= 1kHz

= 5.0V

1

10

100

1000

10.4 10.5 10.6 10.7 10.8 10.9 11.0

0.1

Continued on the following page.

P50E.pdf

May.23,2011

55

16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Recovered Audio Curve

CDSCB10M7GF072-R0

AF Output Voltage (mV)

T.H.D. (%)

Frequency (MHz)

100 10

1000 100

10 1

1 0.1

10.3 10.5 10.7 10.9 11.110.4 10.6 10.8 11.0

Input =

fdev. =

fmod. =

Vcc =

100dBµ

±80kHz

1kHz

3.0V

CDSCB10M7GF109-R0

AF Output Voltage (mV)

T.H.D. (%)

Frequency (MHz)

1000

100

10

1

100

10

1

0.1

10.3 10.5 10.7 10.9 11.1

Input =

fdev. =

fmod. =

Vcc =

100dBµ

±64kHz

1kHz

3.0V

10.4 10.6 10.8 11.0

■ S Curve

CDSCB10M7GF123-R0

Volt (V)

Frequency (MHz)

0.5

0.0

1.0

1.5

2.0

2.5

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

CDSCB10M7GF126-R0

Volt (V)

Frequency (MHz)

1.0

2.0

3.0

4.0

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

P50E.pdf

May.23,2011

56

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

CERAFILr (Ceramic Discriminator) for Audio/Visual Equipment

10.7MHz Standard Lead Type CDALF Series

CDALF10M7 series forms a resonator on a piezoelectric

ceramic substrate. In combination with ICs, this type

obtains stable demodulation characteristics in wide

bandwidths.

As part of the environment protection activity, solder

for terminal plating and terminal-element connection

inside of ceramic filter contain no lead (Pb).

■ Features

1. Compact and excellent mechanical strength

2. Can be combined with various ICs. The IC is

determined by the last number in the part number.

3. Stable demodulation characteristics can be obtained

without adjustment.

4. Stable temperature characteristics

5. Recommended combination: ceramic discriminator

CDALF10M7 series and CERAFILr SFELF10M7 series

of the same frequency rank.

Freq. Rank (Color Dot)

5.0±1.0

8.0±1.0

5.0±1.0

0.4±0.1

3.0±1.0

0.5±0.1

0.3±0.1

0.65±0.1

(in mm)

5.0±0.2

M A R K I N G

E I A J

C O D E

CDALF10M7G_ Series

Freq. Rank (Color Dot)

5.0±1.0

8.0±1.0

5.0±1.0

0.4±0.1

3.0±1.0

0.5±0.1

0.3±0.1

0.65±0.1

(in mm)

5.0±0.2

M A R K I N G

E I A J

C O D E

CDALF10M7C_ Series

Part Number Center

Frequency (fo)

(MHz)

Recovered

Audio 3dB BW

(kHz)

Recovered

Audio Output

(mV)

Distortion

(%) IC

CDALF10M7GA016-B0 10.700 ±30kHz 300 min. within 60 to 90mV 0.9 max. TA8122F

CDALF10M7GA018-B0 10.700 ±30kHz 300 min. within 60 to 90mV 0.9 max. TA8132N

CDALF10M7GA046-B0 10.700 ±30kHz 330 min. 280 min. 1.0 max. LA1832

CDALF10M7GA048-B0 10.700 ±30kHz 400 min. 700 min. 1.0 max. LA1835

CDALF10M7GA092-B0 10.700 ±30kHz 300 min. 60 min. 1.0 max. TA2132P

CDALF10M7CA005A-B0 10.700 ±30kHz 100 min. 600 min. 6.0 max. LA7770

CDALF10M7CA040-B0 10.700 ±30kHz 130 min. 40 min. 0.7 max. TEA5710

For safety purposes, avoid applying a direct current between the terminals.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

CDALF10M7GA018-B0: Color dot is different from standard series.

■ Standard Center Frequency Rank Code

CODE

D

B

A

C

E

Z

M

30kHz Step

10.64MHz±30kHz

10.67MHz±30kHz

10.70MHz±30kHz

10.73MHz±30kHz

10.76MHz±30kHz

25kHz Step

10.650MHz±25kHz

10.675MHz±25kHz

10.700MHz±25kHz

10.725MHz±25kHz

10.750MHz±25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A, B, C, D, E

Combination A, B, C

P50E.pdf

May.23,2011

57

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Test Circuit

CDALF10M7GA016-B0

2.5µ

0.1µ

0.033µ

0.022µ

22µ

270

24k

330p

1k

VCC +3V DC Out AF Out

CDALF10M7GA016

SFELF10M7DF00

IF in

TA8122F (TOSHIBA)

+

123456789101112

24 23 22 21 20 19 18 17 16 15 14 13

Unit

R : Ω

C : F

CDALF10M7GA018-B0

24 23 22 21 20 19 18 17 16 15 14 13

1 2 3 4 5 6 7 8 9 10 11 12

TA8132N (TOSHIBA)

1F in Vcc 3V DC out AF out

SFELF10M7DF00

CDALF10M7GA018

0.022µ

0.1µ

24k

1k

270

2.2µ

0.033µ

22µ

0.022µ

330p

Vcc 3V

Unit

R : Ω

C : F

+

CDALF10M7GA046-B0

24 1314151617181920212223

1 12111098765432

LA1832 (SANYO)

AFC

IF-IN

300

0.047µ

100µ

75 10µ

2.2µ

270

REG

CDALF10M7GA046

3k

1µ

Vcc (5V)

AF OUT

+Unit

R : Ω

C : F

1µ

0.01µ

CSBLA456KE2ZF15

+

1200p

0.047µ5.6k

6.8k

+

3.3µ

22µ

1µ

++

+

CDALF10M7GA048-B0

3.3µ

LA1835 (SANYO)

VCC(7V)

Vt

AFC

47n +

+

15k

300

47n

75

IF-IN

0.047µ

10µ

10µ0.47µ

1µ

10µ

1µ

CSBLA456KE2ZF15 33n

1500p 33n

REG.

1k 1k 3k

Lch

Rch

20k

510

CDALF10M7GA048

5k

L. P. F.

30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

++

+

++ +

Unit

R : Ω

C : F

CDALF10M7GA092-B0

TA2132P(TOSHIBA)

+

DC OUT

AF OUT

Vcc(3.0V)

IF-IN

4.7µ

+

4.7µ

0.033µ

20k

270 0.01µ330p

CDALF10M7GA092

+

2.2µ

16

1

15

2

14

3

13

4

12

5

11

6

10

7

9

8

Unit

R : Ω

C : F

CDALF10M7CA005A-B0

20 19 18 17 16 15 14 13 12 11

12345678910

IC : LA7770 (SANYO)

DC Bias

+5V DC Bias

+5.2V

DATA OUT

0.01µ

470p

0.1µ

0.01µ

33µ

0.022p

1000p

0.1µ

2k

5.6k

20k

10k

2k

5p

220p

10k

Demod.OUT

CDALF10M7CA005A

+

-

Vcc=12V

IF IN

50

Unit

R : Ω

C : F

CDALF10M7CA040-B0

24 23 22 21 20 19 18 17 16 15 14 13

123456789101112

TEA5710 (PHILIPS)

100µ

0.01µ

0.22µ

10µ

100µ

0.01µ

1µ

0.22µ

VCC (3V)

AF-OUT

DC-OUT

S.S.G.

50

280

+ +

+

Unit

R : Ω

C : F

CDALF10M7CA040

P50E.pdf

May.23,2011

58

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Frequency Characteristics

CDALF10M7GA016-B0

0.1

1

10

100

1

10

100

1000

10.610.5 10.7 10.8 10.9 11.010.4 Frequency (MHz)

80dBµ

1000Hz

±22.5kHz

Recovered AF Output Voltage (mV)

Distortion (%)

Input Level

Mod. Freq.

Freq.Dev.

Input signal conditions

Distortion

AF Output

CDALF10M7GA018-B0

Recovered AF Output Voltage (mV)

Distortion (%)

Frequency (MHz)

1

10

100

1000

0.1

1

10

100

10.4 10.5 10.6 10.7 10.8 10.9 11.0

Input Level 80dBµ

Mod. Freq. 1000Hz

Freq. Dev. ±22.5kHz

Distortion

AF Output

Input signal conditions

CDALF10M7GA046-B0

Distortion (%)

Frequency (MHz)

1

10

100

1000

10.510.4 10.6 10.7 10.8 10.9 11.0

0.1

1

10

100

Input Level 112dBµ

Mod. Freq. 1000Hz

Freq. Dev. ±75kHz

AF Output

Distortion

Input signal conditions

Recovered AF Output Voltage (mV)

CDALF10M7GA048-B0

0.1

1

10

100

1

10

100

1000

10.610.5 10.7 10.8 10.9 11.010.4 Frequency (MHz)

Recovered AF Output Voltage (mV)

Input Level

Mod. Freq.

Freq.Dev.

112dBµ

1000Hz

±75kHz

Input signal conditions

Distortion (%)

AF Output

Distortion

CDALF10M7GA092-B0

10

100

1

0.1

10

100

1000

1

Frequency (MHz)

10.510.4 10.6 10.7 10.8 10.9 11.0

Distortion (%)

Input signal conditions

Recovered AF Output Voltage (mV)

Input Level 80dBµ

Mod.Freq. 1000Hz

Freq.Dev. ±22.5kHz

AF Output

Distortion

CDALF10M7CA005A-B0

Recovered AF Output Voltage (mV)

Distortion (%)

Frequency (MHz)

10

100

1000

5000

10.6 10.7 10.8

1

10

100

500

Input Level 100dBµ

Mod. Freq. 1000Hz

Freq. Dev. ±75kHz

AF Output

Distortion

Input signal conditions

Continued on the following page.

P50E.pdf

May.23,2011

59

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Frequency Characteristics

CDALF10M7CA040-B0

Recovered AF Output Voltage (mV)

Distortion (%)

Frequency (MHz)

1

10

100

1000

10.5 10.6 10.7 10.8 10.9

0.1

1

10

100

10.4 11.0

Input Level 100dBµ

Mod. Freq. 1000Hz

Freq. Dev. ±22.5kHz

AF Output

Distortion

Input signal conditions

P50E.pdf

May.23,2011

Please see the following table to reference applied IC.

If you cannot find the IC part number you are seeking, please contact our sales representative.

ex. : CDALF10M7GA016-B0

Suffix Number

CDSCB10M7GA105A-R0

Suffix Number

IC Manufacturer IC Part Number Suffix Number

TOKO

TOSHIBA

TK14570L

TK14583V

TK14588V

TA2003

TA2007

TA2008A / AN

TA2022

TA2057

TA2099N

TA2104AFN

TA2104F

TA2111N / F / FN

TA2132

TA2132BP

TA2142FN

TA2149AN

TA2149N

TA2154FN

TA2159F

TA31161

TA31275FN

TA7303P

TA7640AP

TA8122AN / AF

TA8132AN / AF

TB2132FN

122

112

109

031

033

045

050

057

082

080

080A

077

092

092D

102

100A

100

113

116

072

123

008

006

016

018

128

IC Manufacturer IC Part Number Suffix Number

ATMEL

INFINEON

Panasonic

Freescale

Renesas

NXP

ROHM

SAMSUNG

SANYO

SONY

T. I.

U4313B

U4490B

TDA1576T

TDA6160X

AN7004

AN7232

MC13156

MC13158

µPC1391M

NE604

SA605

SA626

SA636DK

SA639

TDA1596T

TEA5710

TEA5757HL

TEA5762 / 5757

UAA3220TS

BA1448

BA4230AF

BA4234L

S1A0903

LA1225M

LA1814M

LA1823

LA1827M

LA1831

LA1832 / M

LA1833

LA1835 / M

LA1838 / M

LA7770

LV23000M

LV23100V

CX1691M

CX-20029

CXA1111

CXA1238

CXA1238N

CX1343M

CXA1376AM

CXA1538M / N / S

CXA1611

CX3067M

TRF6901

081

034V

051

038

011

053

049

073

056

020

042

047

096

085

120

040

105A

061

098

060

005

004

118A

108A

115

101

083

043

046

086

048

079

023

114

121

078

001

093

027

027N

032

054

069

075

076

119

Ceramic Discriminator 10.7MHz Applied IC Reference Table

60

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

Continued on the following page.

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions

(1) Reflow

Filter is soldered at +350±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended with placement

machines with employ optical placement capabilities. The

component might be resulted in damage by excessive

mechanical force. Please make sure that you have

evaluated by using placement machines before going into

mass production. Do not use placement machines which

utilize mechanical positioning. Please contact Murata for

details beforehand.

(3) Condition for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing components, if solder is excessively

applied to the circuit board, mechanical stress will

cause destruction resistance characteristics to be

lower. To prevent this, be extremely careful in

determining shape and dimension before designing

the circuit board diagram.

(d) When the positioning claws and pick up nozzle are

worn, the load is applied to the components while

positioning is concentrated to one positioning

accuracy, etc. Careful checking and maintenance are

necessary to prevent unexpected trouble.

(e) When correcting components with a soldering iron,

the tip of the soldering iron should not directly touch

the component. Depending on the soldering

conditions, the effective area of terminations may be

reduced. The use of solder containing Ag should be

done to prevent the electrode erosion.

(f) Do not use strong acidity flux, more than 0.2wt%

chlorine content, in re-flow soldering.

(4) Others

● Soldering and Mounting

Temperature (°C)

100

230

260

30 sec.

min. 40 sec.

max.

Peak

(260°C max.)

Pre-heating

(150-180°C)

Heating

(230°C)

Gradual

Cooling

120 sec.

min.

60-120 sec.

[Component Direction]

[Component Layout Close to Board]

Put the

component

lateral to the

direction in

which stress

acts.

Susceptibility to

stress is in the order

of : A>C>B

B

AC

Slit

Perforation

■ CERAFILr 10.7MHz Chip Type SFECF Series

Notice

61

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

● Strage and Operating Conditions

● Rating

The component may be damaged if excessive mechanical

stress is applied.

● Handling

1. Accurate test circuit values are required to measure

electrical characteristics.

It may be a cause of miss-correlation if there is any

deviation, especially stray capacitance, from the test

circuit in the specification.

2. The components, packed in the moisture proof bag (dry

pack), are sensitive to moisture. The following treatment

is required before applying re-flow soldering. To avoid

reliability degradation caused by thermal stress. When

unpacked, store the component in an atmosphere of

re-flow 30°C and below 60%R.H., and solder within 1

week.

3. For safety purposes, connect the output of filters to the IF

amplifier through a D.C. blocking capacitor. Avoid

applying a direct current to the output of ceramic filters.

1. Product Storage Condition

Please store the products in room where the

temperature/humidity is stable. And avoid such places

where there are large temperature changes. Please store

the products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expire date (Shelf life) of the products is six months after

delivery under the conditions of a sealed and an

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas,

Sulfides and so on), because the characteristics may

be reduced in quality, may be degraded in

solderability due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such

as: in a damp heated place, in any place exposed to

direct sunlight or excessive vibration.

(4) Please use the products immediately after the

package is opened, because the characteristics may

be reduced in quality, and/or be degraded in the

solderability due to storage under the poor condition.

(5) Please do not drop the products to avoid cracking of

ceramic element.

4. Others

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

Continued from the preceding page.

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. Coating

Notice

62

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

Continued on the following page.

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions

(1) Reflow

Filter is soldered at +350±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended with placement

machines with employ optical placement capabilities. The

component might be resulted in damage by excessive

mechanical force. Please make sure that you have

evaluated by using placement machines before going into

mass production. Do not use placement machines which

utilize mechanical positioning. Please contact Murata for

details beforehand.

(3) Condition for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing components, if solder is excessively

applied to the circuit board, mechanical stress will

cause destruction resistance characteristics to be

lower. To prevent this, be extremely careful in

determining shape and dimension before designing

the circuit board diagram.

(d) When the positioning claws and pick up nozzle are

worn, the load is applied to the components while

positioning is concentrated to one positioning

accuracy, etc. Careful checking and maintenance are

necessary to prevent unexpected trouble.

(e) When correcting components with a soldering iron,

the tip of the soldering iron should not directly touch

the component. Depending on the soldering

conditions, the effective area of terminations may be

reduced. The use of solder containing Ag should be

done to prevent the electrode erosion.

(f) Do not use strong acidity flux, more than 0.2wt%

chlorine content, in re-flow soldering.

(4) Others

● Soldering and Mounting

[Component Direction]

[Component Layout Close to Board]

Put the

component

lateral to the

direction in

which stress

acts.

Susceptibility to

stress is in the order

of : A>C>B

B

AC

Slit

Perforation

Temperature (°C)

100

230

240

30 sec.

min. 30 sec.

max.

Peak

(240°C max.)

Pre-heating

(150-180°C)

Heating

(230°C)

Gradual

Cooling

120 sec.

min.

60-120 sec.

■ CERAFILr 10.7MHz Chip Type SFECV/SFECK Series

Notice

63

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

● Strage and Operating Conditions

● Rating

The component may be damaged if excessive mechanical

stress is applied.

● Handling

1. Accurate test circuit values are required to measure

electrical characteristics.

It may be a cause of miss-correlation if there is any

deviation, especially stray capacitance, from the test

circuit in the specification.

2. For safety purposes, connect the output of filters to the IF

amplifier through a D.C. blocking capacitor. Avoid

applying a direct current to the output of ceramic filters.

1. Product Storage Condition

Please store the products in room where the

temperature/humidity is stable. And avoid such places

where there are large temperature changes. Please store

the products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expire date (Shelf life) of the products is six months after

delivery under the conditions of a sealed and an

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas,

Sulfides and so on), because the characteristics may

be reduced in quality, may be degraded in

solderability due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such

as: in a damp heated place, in any place exposed to

direct sunlight or excessive vibration.

(4) Please use the products immediately after the

package is opened, because the characteristics may

be reduced in quality, and/or be degraded in the

solderability due to storage under the poor condition.

(5) Please do not drop the products to avoid cracking of

ceramic element.

4. Others

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

Continued from the preceding page.

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. Coating

Notice

64

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

Notice

65

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ CERAFILr 10.7MHz Lead Type SFELF/SFELG/SFVLF/SFKLF Series

● Strage and Operating Conditions

● Rating

The component may be damaged if excessive mechanical

stress is applied.

● Soldering and Mounting

The component cannot withstand washing.

● Handling

1. Do not use this product with bend. The component may

be damaged if excess mechanical stress is applied to it

mounted on the printed circuit board.

2. All kinds of re-flow soldering must not be applied on the

component.

3. Do not clean or wash the component as it is not

hermetically sealed.

4. Do not use strong acidity flux, more than 0.2wt% chlorine

content, in flow soldering.

5. In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

6. Accurate test circuit values are required to measure

electrical characteristics. It may be a cause of

miscorrelation if there is any deviation, especially stray

capacitance, from the test circuit in the specification.

7. For safety purposes, avoid applying a direct current

between the terminals.

1. Product Storage Condition

Please store the products in room where the

temperature/humidity is stable. And avoid such places

where there are large temperature changes. Please store

the products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expire date (Shelf life) of the products is six months after

delivery under the conditions of a sealed and an

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas,

Sulfides and so on), because the characteristics may

be reduced in quality, may be degraded in

solderability due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such

as: in a damp heated place, in any place exposed to

direct sunlight or excessive vibration.

(4) Please use the products immediately after the

package is opened, because the characteristics may

be reduced in quality, and/or be degraded in the

solderability due to storage under the poor condition.

(5) Please do not drop the products to avoid cracking of

ceramic element.

4. Others

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

P50E.pdf

May.23,2011

Continued on the following page.

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions

(1) Reflow

Filter is soldered at +350±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended with placement

machines with employ optical placement capabilities. The

component might be resulted in damage by excessive

mechanical force. Please make sure that you have

evaluated by using placement machines before going into

mass production. Do not use placement machines which

utilize mechanical positioning. Please contact Murata for

details beforehand.

(3) Condition for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing chips, if solder is excessively applied to

the circuit board, mechanical stress will cause

destruction resistance characteristics to lower. To

prevent this, be extremly careful in determining shape

and dimension before designing the circuit board

diagram.

(d) When the positioning claws and pick up nozzle are

worn, the load is applied to the components while

positioning is concentrated to one positioning

accuracy, etc. Careful checking and maintenance are

necessary to prevent unexpected trouble.

(e) When correcting chips with a soldering iron, the tip of

the soldering iron should not directly touch the chip

component.

(4) Others

● Soldering and Mounting

Temperature (°C)

100

230

260

30 sec.

min. 40 sec.

max.

Peak

(260°C max.)

Pre-heating

(150-180°C)

Heating

(230°C)

Gradual

Cooling

120 sec.

min.

60-120 sec.

[Component Direction]

[Component Layout Close to Board]

Put the compon-

ent lateral to

the direction in

which stress

acts.

Susceptibility to

stress is in the order

of : A>C>B

B

AC

Slit

Perforation

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

■ CERAFILr 4.5-6.5MHz Chip Type SFSKA Series

Notice

66

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

● Strage and Operating Conditions

● Rating

The component may be damaged if excessive mechanical

stress is applied.

● Handling

1. Accurate test circuit values are required to measure

electrical characteristics. It may be a cause of mis-

correlation if there is any deviation, especially stray

capacitance, from the test circuit in the specification.

2. For safety purposes, connect the output of filters to the IF

amplifier through a D.C. blocking capacitor. Avoid

applying a direct current to the output of ceramic filters.

1. Product Storage Condition

Please store the products in room where the

temperature/humidity is stable. And avoid such places

where there are large temperature changes. Please store

the products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expire date (Shelf life) of the products is six months after

delivery under the conditions of a sealed and an

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas,

Sulfides and so on), because the characteristics may

be reduced in quality, may be degraded in

solderability due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such

as: in a damp heated place, in any place exposed to

direct sunlight or excessive vibration.

(4) Please use the products immediately after the

package is opened, because the characteristics may

be reduced in quality, and/or be degraded in the

solderability due to storage under the poor condition.

(5) Please do not drop the products to avoid cracking of

ceramic element.

4. Others

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

Continued from the preceding page.

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. Coating

Notice

67

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

Continued on the following page.

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions

(1) Reflow

Filter is soldered at +350±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended with placement

machines with employ optical placement capabilities. The

component might be resulted in damage by excessive

mechanical force. Please make sure that you have

evaluated by using placement machines before going into

mass production. Do not use placement machines which

utilize mechanical positioning. Please contact Murata for

details beforehand.

(3) Condition for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing components, if solder is excessively

applied to the circuit board, mechanical stress will

cause destruction resistance characteristics to be

lower. To prevent this, be extremely careful in

determining shape and dimension before designing

the circuit board diagram.

(d) When the positioning claws and pick up nozzle are

worn, the load is applied to the components while

positioning is concentrated to one positioning

accuracy, etc. Careful checking and maintenance are

necessary to prevent unexpected trouble.

(e) When correcting components with a soldering iron,

the tip of the soldering iron should not directly touch

the component. Depending on the soldering

conditions, the effective area of terminations may be

reduced. The use of solder containing Ag should be

done to prevent the electrode erosion.

(f) Do not use strong acidity flux, more than 0.2wt%

chlorine content, in re-flow soldering.

(4) Others

● Soldering and Mounting

Temperature (°C)

100

200

260

30 sec.

min. 60 sec.

max.

Peak

(260°C max.)

Pre-heating

(150-170°C)

Heating

(200°C)

Gradual

Cooling

120 sec.

min.

60-120 sec.

[Component Direction]

Put the compon-

ent laterally to

the direction in

which stress

acts.

[Component Layout Close to Board]

Susceptibility to

stress is in the order

of : A>C>B

B

AC

Slit

Perforation

■ CERAFILr 2.3-5.7MHz Chip Type SFSKB Series

Notice

68

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

● Strage and Operating Conditions

● Rating

The component may be damaged if excessive mechanical

stress is applied.

● Handling

1. Accurate test circuit values are required to measure

electrical characteristics.

It may be a cause of miss-correlation if there is any

deviation, especially stray capacitance, from the test

circuit in the specification.

2. For safety purposes, connect the output of filters to the IF

amplifier through a D.C. blocking capacitor. Avoid

applying a direct current to the output of ceramic filters.

1. Product Storage Condition

Please store the products in room where the

temperature/humidity is stable. And avoid such places

where there are large temperature changes. Please store

the products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expire date (Shelf life) of the products is six months after

delivery under the conditions of a sealed and an

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas,

Sulfides and so on), because the characteristics may

be reduced in quality, may be degraded in

solderability due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such

as: in a damp heated place, in any place exposed to

direct sunlight or excessive vibration.

(4) Please use the products immediately after the

package is opened, because the characteristics may

be reduced in quality, and/or be degraded in the

solderability due to storage under the poor condition.

(5) Please do not drop the products to avoid cracking of

ceramic element.

4. Others

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

Continued from the preceding page.

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. Coating

Notice

69

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

Continued on the following page.

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions

2. Wash

(1) Reflow

Electrode is directly soldered with the tip of soldering iron

at +350±5°C for 3.0±0.5 seconds.

(2) Soldering Iron

Do not use strong acidity flux, more than 0.2wt% chlorine

content, in re-flow soldering.

(3) Others

• Immersion Wash

2 minutes max. in above solvent at +60°C max.

• Shower or Rinse Wash

2 minutes max. in above solvent at +60°C max.

CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),

Water (Demineralized Water), Cleaning Water Solution

(Cleanthrough-750H, Pine Alpha 100S), Silicon

(Technocare FRW)

3. Coating

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

(1) Cleaning Solvent

(2) Cleaning Conditions

• When components are immersed in solvent, be sure to

maintain the temperature of components below the

temperature of solvent.

• Please do not use ultrasonic cleaning.

• Total washing time should be within 4 minutes.

• Please ensure the component is thoroughly evaluated in

your application circuit.

• Please do not use chlorine, petroleum and alkali

cleaning solvent.

• If you plan to use any other types of solvents, please

consult with Murata or Murata representative prior to

using.

(3) Notice

● Soldering and Mounting

Peak

(260°C max.)

Heating

(230°C)

Gradual

Cooling

Pre-heating

(150-180°C)

100

230

260

Temperature (°C)

60-120 sec. 40 sec.

max.

30 sec.

min. 120 sec.

min.

■ CERAFILr 455kHz Chip Type SFPKA Series

Notice

70

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

● Strage and Operating Conditions

● Rating

The component may be damaged if excessive mechanical

stress is applied.

● Handling

1. In the case that the component is cleaned, confirm no

reliability degradation is created.

2. The components, packed in the moisture-proof bag (dry

pack), are sensitive to moisture. The following treatment

is required before applying re-flow soldering, to avoid

package cracks or reliability degradation caused by

thermal stress. When unpacked, store the component in

an atmosphere of below 25°C and below 65%R.H., and

solder within 48 hours.

3. For safety purposes, connect the output of filters to the IF

amplifier through a D.C. blocking capacitor. Avoid

applying a direct current to the output of ceramic filters.

1. Product Storage Condition

Please store the products in room where the

temperature/humidity is stable. And avoid such places

where there are large temperature changes. Please store

the products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expire date (Shelf life) of the products is six months after

delivery under the conditions of a sealed and an

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas,

Sulfides and so on), because the characteristics may

be reduced in quality, may be degraded in

solderability due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such

as: in a damp heated place, in any place exposed to

direct sunlight or excessive vibration.

(4) Please use the products immediately after the

package is opened, because the characteristics may

be reduced in quality, and/or be degraded in the

solderability due to storage under the poor condition.

(5) Please do not drop the products to avoid cracking of

ceramic element.

4. Others

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

Continued from the preceding page.

Notice

71

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

Notice

72

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ CERAFILr 455kHz Lead Type SFPLA/CFWLA/CFULA Series

● Strage and Operating Conditions

● Rating

The component may be damaged if excessive mechanical

stress is applied.

● Soldering and Mounting

The component cannot withstand washing.

● Handling

1. Do not use this product with bend. The component may

be damaged if excessive mechanical stress is applied to

it mounted on the printed circuit board.

2. All kinds of re-flow soldering must not be applied on the

component.

3. Do not clean or wash the component as it is not

hermetically sealed.

4. Do not use strong acidity flux, more than 0.2wt% chlorine

content, in flow soldering.

5. Conformal coating of the component is not acceptable

due to non sealed construction.

6. Accurate test circuit values are required to measure

electrical characteristics. It may be a cause of

miscorrelation if there is any deviation, especially stray

capacitance, from the test circuit in the specification.

7. For safety purposes, connect the output of filters to the IF

amplifier through a D.C. blocking capacitor. Avoid

applying a direct current to the output of ceramic filters.

1. Product Storage Condition

Please store the products in room where the

temperature/humidity is stable. And avoid such places

where there are large temperature changes. Please store

the products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expire date (Shelf life) of the products is six months after

delivery under the conditions of a sealed and an

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas,

Sulfides and so on), because the characteristics may

be reduced in quality, may be degraded in

solderability due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such

as: in a damp heated place, in any place exposed to

direct sunlight or excessive vibration.

(4) Please use the products immediately after the

package is opened, because the characteristics may

be reduced in quality, and/or be degraded in the

solderability due to storage under the poor condition.

(5) Please do not drop the products to avoid cracking of

ceramic element.

4. Others

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

P50E.pdf

May.23,2011

Continued on the following page.

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions

(1) Reflow

Filter is soldered at +350±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended with placement

machines with employ optical placement capabilities. The

component might be resulted in damage by excessive

mechanical force. Please make sure that you have

evaluated by using placement machines before going into

mass production. Do not use placement machines which

utilize mechanical positioning. Please contact Murata for

details beforehand.

(3) Condition for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing chips, if solder is excessively applied to

the circuit board, mechanical stress will cause

destruction resistance characteristics to lower. To

prevent this, be extremly careful in determining shape

and dimension before designing the circuit board

diagram.

(d) When the positioning claws and pick up nozzle are

worn, the load is applied to the components while

positioning is concentrated to one positioning

accuracy, etc. Careful checking and maintenance are

necessary to prevent unexpected trouble.

(e) When correcting chips with a soldering iron, the tip of

the soldering iron should not directly touch the chip

component.

(4) Others

● Soldering and Mounting

Temperature (°C)

100

230

260

30 sec.

min. 40 sec.

max.

Peak

(260°C max.)

Pre-heating

(150-180°C)

Heating

(230°C)

Gradual

Cooling

120 sec.

min.

60-120 sec.

[Component Direction]

[Component Layout Close to Board]

Put the compon-

ent lateral to

the direction in

which stress

acts.

Susceptibility to

stress is in the order

of : A>C>B

B

AC

Slit

Perforation

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

■ Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series

Notice

73

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

● Strage and Operating Conditions

● Rating

The component may be damaged if excessive mechanical

stress is applied.

● Handling

1. Accurate test circuit values are required to measure

electrical characteristics. It may be a cause of mis-

correlation if there is any deviation, especially stray

capacitance, from the test circuit in the specification.

2. For safety purposes, connect the output of filters to the IF

amplifier through a D.C. blocking capacitor. Avoid

applying a direct current to the output of ceramic filters.

1. Product Storage Condition

Please store the products in room where the

temperature/humidity is stable. And avoid such places

where there are large temperature changes. Please store

the products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expire date (Shelf life) of the products is six months after

delivery under the conditions of a sealed and an

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas,

Sulfides and so on), because the characteristics may

be reduced in quality, may be degraded in

solderability due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such

as: in a damp heated place, in any place exposed to

direct sunlight or excessive vibration.

(4) Please use the products immediately after the

package is opened, because the characteristics may

be reduced in quality, and/or be degraded in the

solderability due to storage under the poor condition.

(5) Please do not drop the products to avoid cracking of

ceramic element.

4. Others

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

Continued from the preceding page.

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. Coating

Notice

74

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

Continued on the following page.

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions

(1) Reflow

Filter is soldered at +300±5°C for 3.0±0.5 seconds. The

soldering iron should not touch the filter while soldering.

(2) Soldering Iron

The component is recommended with placement

machines with employ optical placement capabilities. The

component might be resulted in damage by excessive

mechanical force. Please make sure that you have

evaluated by using placement machines before going into

mass production. Do not use placement machines which

utilize mechanical positioning. Please contact Murata for

details beforehand.

(3) Condition for Placement Machines

(a) The component may be damaged if excess

mechanical stress is applied to it mounted on the

printed circuit board.

(b) Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of

the board.

(c) After installing components, if solder is excessively

applied to the circuit board, mechanical stress will

cause destruction resistance characteristics to be

lower. To prevent this, be extremely careful in

determining shape and dimension before designing

the circuit board diagram.

(d) When the positioning claws and pick up nozzle are

worn, the load is applied to the components while

positioning is concentrated to one positioning

accuracy, etc. Careful checking and maintenance are

necessary to prevent unexpected trouble.

(e) When correcting components with a soldering iron,

the tip of the soldering iron should not directly touch

the component. Depending on the soldering

conditions, the effective area of terminations may be

reduced. The use of solder containing Ag should be

done to prevent the electrode erosion.

(4) Others

● Soldering and Mounting

Temperature (°C)

100

230

260

30 sec.

min. 40 sec.

max.

Peak

(260°C max.)

Pre-heating

(150-180°C)

Heating

(230°C)

Gradual

Cooling

120 sec.

min.

60-120 sec.

[Component Direction]

[Component Layout Close to Board]

Put the

component

laterally to the

direction in

which stress

acts.

Susceptibility to

stress is in the order

of : A>C>B

B

AC

Slit

Perforation

■ Ceramic Discriminator 10.7MHz Chip Type CDSCB Series

Notice

75

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

● Strage and Operating Conditions

● Rating

The component may be damaged if excessive mechanical

stress is applied.

● Handling

1. Accurate test circuit values are required to measure

electrical characteristics.

It may be a cause of miss-correlation if there is any

deviation, especially stray capacitance, from the test

circuit in the specification.

2. For safety purposes, avoid applying a direct current

between the terminals.

1. Product Storage Condition

Please store the products in room where the

temperature/humidity is stable. And avoid such places

where there are large temperature changes. Please store

the products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expire date (Shelf life) of the products is six months after

delivery under the conditions of a sealed and an

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas,

Sulfides and so on), because the characteristics may

be reduced in quality, may be degraded in

solderability due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such

as: in a damp heated place, in any place exposed to

direct sunlight or excessive vibration.

(4) Please use the products immediately after the

package is opened, because the characteristics may

be reduced in quality, and/or be degraded in the

solderability due to storage under the poor condition.

(5) Please do not drop the products to avoid cracking of

ceramic element.

4. Others

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

Continued from the preceding page.

Do not clean or wash the component as it is not

hermetically sealed.

2. Wash

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

3. Coating

Notice

76

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

P50E.pdf

May.23,2011

Notice

77

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Ceramic Discriminator 10.7MHz Lead Type CDALF Series

● Strage and Operating Conditions

● Rating

The component may be damaged if excessive mechanical

stress is applied.

● Soldering and Mounting

The component cannot withstand washing.

● Handling

1. Do not use this product with bend. The component may

be damaged if excess mechanical stress is applied to it

mounted on the printed circuit board.

2. All kinds of re-flow soldering must not be applied on the

component.

3. Do not clean or wash the component as it is not

hermetically sealed.

4. Do not use strong acidity flux, more than 0.2wt% chlorine

content, in flow soldering.

5. In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

6. Accurate test circuit values are required to measure

electrical characteristics. It may be a cause of

miscorrelation if there is any deviation, especially stray

capacitance, from the test circuit in the specification.

7. For safety purposes, avoid applying a direct current

between the terminals.

1. Product Storage Condition

Please store the products in room where the

temperature/humidity is stable. And avoid such places

where there are large temperature changes. Please store

the products under the following conditions:

Temperature: -10 to +40°C

Humidity: 15 to 85% R.H.

2. Expiration Date on Storage

Expire date (Shelf life) of the products is six months after

delivery under the conditions of a sealed and an

unopened package. Please use the products within six

months after delivery. If you store the products for a long

time (more than six months), use carefully because the

products may be degraded in solderability due to storage

under poor conditions.

Please confirm solderability and characteristics for the

products regularly.

3. Notice on Product Storage

(1) Please do not store the products in a chemical

atmosphere (Acids, Alkali, Bases, Organic gas,

Sulfides and so on), because the characteristics may

be reduced in quality, may be degraded in

solderability due to the storage in a chemical

atmosphere.

(2) Please do not put the products directly on the floor

without anything under them to avoid damp places

and/or dusty places.

(3) Please do not store the products in the places such

as: in a damp heated place, in any place exposed to

direct sunlight or excessive vibration.

(4) Please use the products immediately after the

package is opened, because the characteristics may

be reduced in quality, and/or be degraded in the

solderability due to storage under the poor condition.

(5) Please do not drop the products to avoid cracking of

ceramic element.

4. Others

Please be sure to consult with our sales representative or

engineer whenever the products are to be used in

conditions not listed above.

P50E.pdf

May.23,2011

Packaging

78

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

■ Minimum Quantity

SFECF

SFECV/SFECK

SFELF

SFELG

SFKLF

SFVLF

SFSKA

SFSKB

CFULA

CFWLA

SFPKA

SFPLA

TPSKA

CDALF

CDSCB

3,000

1,000

3,000

CERAFILr<10.7MHz>

CERAFILr<2.3-6.5MHz>

CERAFILr<455kHz>

Ceramic Traps<3.5-6.5MHz>

Ceramic Discriminators<10.7MHz>

2,000

1,500

1,000

1,500

500

50

200

150

200

BoxMagazineBulkAmmo Pack

ø180mmø330mm

Taping

■ CERAFILr 10.7MHz Chip Type SFECF Series

( ) : Reference

(in mm)

Dimensions of Carrier Tape Dimensions of Reel

ø13.0±0.5

2.0±0.5

240 to 280

400 to 560

160 to 190

Empty

Components

Cover film

Empty

Trailer Leader

17.0±1.0

+1.0

-0

13.0

+0

-1.5

180

+1.0

-0

60

Chip filter

ø1.55±0.05

User direction of feed

Cover film

Peeling strength

(0.1 to 0.7N)

0.3±0.05

1.84±0.1

(0.05)

(3˚)

10˚ max.

5.5±0.05

4.1±0.1

1.75±0.1

3° max.

4.1±0.1

4.0±0.1

2.0±0.05

4.0±0.1

3.35

12.0±0.2

+0.1

-0.05

• Part number marked side is always facing upside.

Continued on the following page.

P50E.pdf

May.23,2011

Packaging

79

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ CERAFILr 10.7MHz Chip Type SFECV/SFECK Series

Dimension of reel

( ) : Reference

(in mm)

ø13.0±0.5

2.0±0.5

17.0±1.0

240-280

400-560

160-190

Empty

Components

Cover film

Empty

Trailer Leader

1.7 W0.1

Y0.05

12.0T0.2

0.3T0.05

7.3T0.01

5.5T0.05

1.75T0.1

1.9T0.1

10° max.

Peeling strength 0.1 to 0.7N

Cover film

• Part number marked side is always facing up.

User direction of feed

3.0T0.14.0T0.1

ø1.5W0.1

Y0.0 2.0T0.05 4.0T0.1

(3°)

∗

∗∗

∗

∗∗

∗

∗∗

∗

∗∗

∗

∗∗

Chip filter

Dimensions of carrier tape

13.0+1.0

-0

180+0

-1.5

60+1.0

-0

Continued on the following page.

P50E.pdf

May.23,2011

Packaging

80

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ CERAFILr 10.7MHz Lead Type SF_LF Series

(in mm)

Lead length under the hold down tape

Length of cut off

Pitch of components

Pitch of sprocket hole (1)

Length from hole center to lead

Length from hole center to component center

Lead spacing (1)

Lead spacing (2)

Slant to the forward or backward

Slant to the left or right

Width of carrier tape

Width of hold down tape

Position of sprocket hole

Gap of hold down tape and carrier tape

Distance between the center of sprocket

hole and lead stopper

Diameter of sprocket hole

Total tape thickness

Pitch of sprocket hole (2)

Item Code Dimensions Tolerance Remarks

L1

L2

P

P0

P1

P2

F

F1

dh

dS1

W

W0

W1

W2

H0

D0

t

P020

3.0 min.

2.0 max.

12.7

3.85

6.35

5.0

2.5

0

18.0

6.0 min.

9.0

0

18.0

ø4.0

0.6

254.0

To distinguish the direction

Hold down tape doesn't exceed

the carrier tape

The pitch of 20 sprocket holes

-

±0.5

±0.2

±0.5

±0.2

±1.0

±0.5

-

±0.5

±0.2

±1.5

+0.5

–0.2

+0.5

–0

P2P

P1

P0

F

F1F1

W

L1

L2

W0

W1

H0

W2

D0

t

dS1

dh dh

Continued on the following page.

P50E.pdf

May.23,2011

Packaging

81

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ CERAFILr 4.5-6.5MHz Chip Type SFSKA Series

(in mm)

21.5±1.0

330±2

80±1

17.5±0.5

Empty

240 to 280 min.

400 to 560

160 to 190

ComponentsEmpty

Trailer Leader

Cover film

2.2±0.5

ø13.0±0.2

Dimensions of Reel

User direction of feed

Chip filter

Cover film

Peeling strength

(0.1 to 0.7N)

+0.1

–0.0

+0.1

–0.05

ø1.5 2.0±0.1 4.0±0.1

1.75±0.1

7.5±0.1

16.0±0.2

2.3±0.1

2.1

0.3±0.05 9.0±0.1

4.3±0.1

(3˚)

10˚ max.

8.0±0.1

Dimensions of Carrier Tape

+0.1

–0.0

ø1.5

• Part number marked side is always facing upside.

■ CERAFILr 2.3-5.7MHz Chip Type SFSKB Series

(in mm)

17.5±1.5

(ø330)

(ø80)

13.5±1.0

Empty

240 to 280

400 to 560

160 to 190

ComponentsEmpty

Trailer Leader

Cover Film

2.2±0.2

ø13.0±0.2

Label

Dimensions of ReelDimensions of Carrier Tape

• Part Number marked side is always facing upside.

∗∗∗

∗

1.6±0.1

8.0±0.1

User direction of feed

4.2±0.1 Cover Film

+0.1

–0.0

ø1.5

2.0±0.1 4.0±0.1

5.6±0.1

5.5±0.1

12.0±0.2

1.75±0.1

■ CERAFILr 455kHz Chip Type SFPKA Series

Dimensions of Carrier Tape

User direction of feed

12.0±0.1

16.0±0.2

8.8±0.1

7.5±0.1 1.75±0.1

4.0±0.1

2.0±0.1

5.3±0.1

ø1.5

7.4±0.1

+0.1

-0

Cover film

(in mm)

Dimensions of Reel

Label

ø13.0±0.2

2.2±0.5

21.5±1.0

330±2

80±1

240 to 280

400 to 560

160 to 190

17.5±0.5

EmptyComponents

Cover film

Empty

Trailer Leader

• Part number marked side is always facing upside.

Continued on the following page.

P50E.pdf

May.23,2011

Packaging

82

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ CERAFILr 455kHz Lead Type SFPLA Series

Standard of Magazine Cassette

1. Putting CERAFILr into Magazine

A magazine should contain 50pcs of CERAFILr, with

ground terminals all facing toward the "Murata" mark on a

magazine, and be closed with exclusive stoppers at both

ends. Above should be the minimum packaging unit.

2. Quality of Magazine

(1) Transparent so that input / output direction is visually

recognizable.

(2) With an angle of 35° CERAFILr should slip down

smoothly.

(3) Antistatic finish

(4) Recycling

Note: Magazines should be sent back for recycling.

(Therefore, empty magazines should not be damaged.)

3. Dimensions of Magazine Cassette

Material: Polycarbonate

Camber of Case: ±1mm max. against entire length (reference)

Twist of Case: ±0.5mm max. (reference)

(in mm)

Tolerance unless otherwise specified: ±0.2

HP51M0003-02

405±1.0

9.0±0.3

7.6±0.25

18.7±0.3

10±0.38.1±0.3

1.1 1.1

■ CERAFILr 455kHz Lead Type CFWLA Series

Standard of Magazine Cassette

1. Putting CERAFILr into Magazine

A magazine should contain 50pcs of CERAFILr, with

ground terminals all facing toward the "Murata" mark on a

magazine, and be closed with exclusive stoppers at both

ends. Above should be the minimum packaging unit.

2. Quality of Magazine

(1) Transparent so that input / output direction is visually

recognizable.

(2) With an angle of 35° CERAFILr should slip down

smoothly.

(3) Antistatic finish

(4) Recycling

Note: Magazines should be sent back for recycling.

(Therefore, empty magazines should not be damaged.)

3. Magazine should be packaged in a cardboard box.

MURATA model name, quantity and outgoing inspection

number should be indicated on the box.

Cardboard box may contain maximum 33 magazines

(1,650 pieces of filter).

4. Dimensions of Magazine Cassette

Material: Polycarbonate

Camber of Case: ±1mm max. against entire length (reference)

Twist of Case: ±0.5mm max. (reference)

(in mm)

Tolerance unless otherwise specified: ±0.2

muRataHP51M0064

576.0±2.0

9.0±0.3

7.3±0.25

7.5±0.3

18.7±0.3

9.0±0.3

ANTISTATIC

5.3±0.3

0.6

Continued on the following page.

P50E.pdf

May.23,2011

Packaging

83

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series

(in mm)

21.5±1.0

330±2

80±1

17.5±0.5

Empty

240 to 280 min.

400 to 560

160 to 190

ComponentsEmpty

Trailer Leader

Cover film

2.2±0.5

ø13.0±0.2

Dimensions of Reel

User direction of feed

Chip filter

Cover film

Peeling strength

(0.1 to 0.7N)

+0.1

–0.0

+0.1

–0.05

ø1.5 2.0±0.1 4.0±0.1

1.75±0.1

7.5±0.1

16.0±0.2

2.3±0.1

2.1

0.3±0.05 9.0±0.1

4.3±0.1

(3˚)

10˚ max.

8.0±0.1

Dimensions of Carrier Tape

+0.1

–0.0

ø1.5

• Part number marked side is always facing upside.

■ Ceramic Discriminator 10.7MHz Chip Type CDSCB Series

4.0±0.1

Cover film

4.0±0.1 2.0±0.05

12.0±0.2

(9.0)

ø1.5+0.1

-0

ø1.5+0.1

-0

5.5±0.05

1.75±0.1

4.7±0.1

User direction of feed

• Part number marked side is always facing upside.

0.3±0.05

(1.7 max.)

1.1±0.1

(3˚)

2.2±0.1

Peeling strength

0.1 to 0.7N 10˚

Dimension of reel

( ) : Reference

(in mm)

ø13.0±0.2

2.0±0.5

17.0±1.0

180+0.1

-1.5

60+0.1

-0

240 to 280

400 to 560

160 to 190

EmptyComponents

Cover film

Empty

Trailer Leader

13.0+1.0

-0

Dimensions of Carrier Tape

Continued on the following page.

P50E.pdf

May.23,2011

Packaging

84

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Ceramic Discriminator 10.7MHz Lead Type CDALF Series

(in mm)

Hold down tape doesn't exceed the carrier tape

The pitch of 20 sprocket holes

P2P

P1

P0

F

W

L1

W0

W1

H0

W2

D0

t

dS1

Item Code Dimensions Tolerance Remarks

Lead length under the hold down tape

Pitch of component

Pitch of sprocket hole (1)

Length from hole center to lead

Length from hole center to component center

Lead spacing

Slant to the forward or backward

Slant to the left or right

Width of carrier tape

Width of hold down tape

Position of sprocket hole

Diameter of sprocket hole

Total tape thickness

Pitch of sprocket hole (2)

L1

P

P0

P1

P2

F

dh

dS1

W

W0

W1

W2

H0

D0

t

Po20

3.0 min.

12.7

3.85

6.35

5.0

0

18.0

6.0 min.

9.0

0

18.0

ø4.0

0.6

254.0

-

±0.5

±0.2

±0.5

±1.0

±0.5

-

±0.5

±0.2

±1.5

+0.5

-0.0

+0.5

-0.2

dh dh

Gap of hold down tape and

carrier tape

Distance between the center of

sprocket hole and lead stopper

Part Number Index

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

85

CDALF

CDSCB

CFULA

CFWLA

SFECF

SFECK

SFECV

SFELF

SFELG

SFKLF

SFPKA

SFPLA

SFSKA

SFSKB

SFVLF

TPSKA

Ceramic Discriminators for FM

Chip Ceramic Discriminators for FM

Ceramic Filters (CERAFILr) for AM

Chip Ceramic Filters (CERAFILr) for FM

Ceramic Filters (CERAFILr) for FM

Chip Ceramic Filters (CERAFILr) for AM

Ceramic Filters (CERAFILr) for AM

Chip Ceramic Filters (CERAFILr) for TV/VCR

Ceramic Filters (CERAFILr) for FM

Chip Ceramic Traps

··········

··············································

··········································

·······································

····································

·····································

·····················

·······································

··········································

·····································

·······································

·································

··········································

·······················································

p56

p51

p46

p44, 46

p5-6

p11

p14, 17, 23-24, 26, 28-29, 31

p20-21

p28

p42

p44, 46

p35

p38

p28

p49

P50E.pdf

May.23,2011

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. P50E.pdf

May.23,2011