Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

Customer Specification

PART NO. XM1403K

Diameters (In)

1) Component 1 3 X 1 COND

a) Conductor 14 (105/34) AWG BC 0.074

2) Cable Assembly 3 Components Cabled

a) Twists: 4.8 Twists/foot (min)

b) Core Wrap REMAY Tape, 25% Overlap, Min.

3) Jacket 0.050" Wall, Nom.,PVC 0.366+/- 0.018

a) Color(s) BLACK

b) Print

ALPHA WIRE-* P/N XM1403K 3C 14 AWG (2.11mm2)

SERIES XM (UL) WTTC 90C DRY 75C WET 1000V OR

(UL) TC-ER 90C DRY 75C WET 600V SUN RES

DIR BUR OIL RES I OR MTW 14 AWG

a) Component 1 Unlisted Conductor 90°C Dry / 75°C Wet / 600 VRMS

b) Overall MTW 90°C Dry / 60°C Wet / 600 VRMS

TC 90°C Dry / 75°C Wet / 600 VRMS

EXPOSED RUN

SUN RES

OIL RES I

WTTC 90°C Dry / 75°C Wet / 1000 VRMS

2) CSA International AWM I/II A/B 90°C / 600 VRMS

3) CE: EU Low Voltage Directive 2006/95/EC

This product does not contain Substances of Very High Concern (SVHC) listed on the European

Union's REACH candidate list in excess of 0.1% mass of the item. For up-to-date information,

please see Alpha's REACH SVHC Declaration.

3) California Proposition 65: The outer surface materials used in the manufacture of this part meet the requirements of

California Proposition 65.

Physical & Mechanical Properties

1) Temperature Range -30 to 90°C(static), -5 to 90°C (dynamic)

2) Bend Radius 8X Cable Diameter(static), 10X Cable Diameter(dynamic)

3) Pull Tension 98 Lbs, Maximum

Packaging Flange x Traverse x Barrel (inches)

a) Bulk(Made-to-order)

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742)

Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure their accuracy at the time of publication, information and specifications

described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not

ensure product availability.

Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or

agrees that this document cannot be used in any manner adverse to the interests of ALPHA WIRE, and that no portion of this document may be

copied or otherwise reproduced without the prior written consent of ALPHA WIRE. In the case of conflicting contractual provisions, this notice shall

govern the status of this document. ©2013 ALPHA WIRE - all rights reserved.

EU/China ROHS CERTIFICATE OF COMPLIANCE

To Whom It May Concern:

Alpha Wire Part Number: XM1403K

XM1403K , RoHS-Compliant Commencing With 3/16/2010 Production

This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the European

Parliament, better known as the RoHS Directive, with regards to restrictions of the use of certain hazardous substances used in the manufacture of

electrical and electronic equipment. The reader is referred to this Directive for the specific definitions and extents of this Directive. No Exemptions

Hexavalent Chromium 0.1% by weight (1000 ppm )

Polybrominated Biphenyls (PBB) 0.1% by weight (1000 ppm)

Polybrominated Diphenyl Ethers (PBDE) ,

Including Deca-BDE 0.1% by weight (1000 ppm)

The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief at the date of its

release. The information provided is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or

the one that it will become part of. The intent of this document is not to be considered a warranty or quality specification. Regulatory information is

for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual

usage of the product.

Authorized Signatory for the Alpha Wire Company: