3.2x1.6mm SMD CHIP LED LAMP Part Number: APTR3216SURCK Hyper Red Features Description z 3.2mmx1.6mm SMT LED,1.05mm thickness. The Hyper Red source color devices are made with Al- z Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. z Ideal for backlight and indicator. z Vavrious colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAC0364 REV NO: V.7 DATE: SEP/14/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 1 OF 5 ERP: 1203002425 Selection Guide Part No. Dice APTR3216SURCK Lens Type Hyper Red (AlGaInP) Water Clear Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 120 230 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Hyper Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 650 nm IF=20mA Hyper Red 630 nm IF=20mA Spectral Line Half-width Hyper Red 28 nm IF=20mA C Capacitance Hyper Red 35 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAC0364 REV NO: V.7 DATE: SEP/14/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 2 OF 5 ERP: 1203002425 Hyper Red APTR3216SURCK SPEC NO: DSAC0364 REV NO: V.7 DATE: SEP/14/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 3 OF 5 ERP: 1203002425 APTR3216SURCK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAC0364 REV NO: V.7 DATE: SEP/14/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 4 OF 5 ERP: 1203002425 PACKING & LABEL SPECIFICATIONS APTR3216SURCK SPEC NO: DSAC0364 REV NO: V.7 DATE: SEP/14/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 5 OF 5 ERP: 1203002425