MPK 95-06 DA Advanced Technical Information VRRM = 600 V IFAV = 95 A trr = 35 ns Fast Recovery Epitaxial Diode (FRED) Module 3 VRSM VRRM V V 600 600 2 3 TO-240 AA 2 1 MPK 95-06 DA Symbol Conditions IFRMS IFAV TC = 110C; sine 180 IFSM TVJ = 45C; I2t 1 Type Maximum Ratings 200 95 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1200 1280 A A TVJ = 150C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1070 1140 A A TVJ = 45C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 7200 6900 A2 s A2 s TVJ = 150C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 5700 5500 A2s A2 s -40...+150 -40...+125 C C 215 W TVJ Tstg Ptot TC = 25C VISOL 50/60 Hz, RMS; t=1s 3600 V~ Md Mounting/Terminal torque (M5) 2.5-4 Nm dS dA a Creep distance on surface Strike distance through air Maximum allowable acceleration 12.7 9.6 50 mm mm m/s2 90 g Weight Symbol Conditions IR VR = VRRM TVJ = 25C TVJ = 125C 1.3 5 mA mA VF IF = 50 A; TVJ = 125C TVJ = 25C TVJ = 125C TVJ = 25C 1.22 1.73 1.40 1.89 V V V V 0.98 2.3 V m 0.575 0.1 K/W K/W ns IF = 100 A; Characteristic Values (per diode) typ. max. VT0 rT For power-loss calculations only TVJ = 150C RthJC RthCH DC current DC current trr IF = 1 A; VR = 30 V; -di/dt = 300A/s TVJ = 25C 35 IRM IF = 130 A; VR = 100 V; -di/dt = 100A/s TVJ = 25C TVJ = 100C 5.5 4 6.8 Features * International standard package with DCB ceramic base plate * Planar passivated chips * Short recovery time * Low switching losses * Soft recovery behaviour * Isolation voltage 3600 V~ Applications * Antiparallel diode for high frequency switching devices * Free wheeling diode in converters and motor control circuits * Inductive heating and melting * Uninterruptible power supplies (UPS) * Ultrasonic cleaners and welders Advantages * High reliability circuit operation * Low voltage peaks for reduced protection circuits * Low noise switching * Low losses Dimensions in mm (1 mm = 0.0394") A A IXYS reserves the right to change limits, test conditions and dimensions (c) 2005 IXYS All rights reserved 508 IFAV rating includes reverse blocking losses at TVJM, VR = 0.6 VRRM, duty cycle d = 0.5 Data according to IEC 60747 and per diode unless otherwise specified 1-1