SPEC NO: DSAD0943 REV NO: V.7 DATE: MAR/04/2011 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203001797
2.0x1.25mm SMD CHIP LED LAMP
Part Number: APT2012EC High Efficiency Red
Features
z2.0mm x1.25mm SMT LED,0.75mm thickness.
zLow power consumption.
zWide viewing angle.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD0943 REV NO: V.7 DATE: MAR/04/2011 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203001797
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APT2012EC High Efficiency Red (GaAsP/GaP) Water Clear 8 15 120°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength High Efficiency Red 627 nm IF=20mA
λD [1] Dominant Wavelength High Efficiency Red 625 nm IF=20mA
Δλ1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA
C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage High Efficiency Red 2 2.5 V IF=20mA
IR Reverse Current High Efficiency Red 10 uA VR=5V
Parameter High Efficiency Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAD0943 REV NO: V.7 DATE: MAR/04/2011 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203001797
High Efficiency Red APT2012EC
SPEC NO: DSAD0943 REV NO: V.7 DATE: MAR/04/2011 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203001797
APT2012EC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAD0943 REV NO: V.7 DATE: MAR/04/2011 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203001797
PACKING & LABEL SPECIFICATIONS APT2012EC
