MURS160-13 - Diodes - Product.Network

MURS140 - MURS 160

Document number: DS30130 Rev. 10 - 2 1 of 4

www.diodes.com September 2010

MURS140 - MURS160

1.0A SURFACE MOUNT SUPER-FAST RECTIFIER

Features

• Glass Passivated Die Construction

• Super-Fast Recovery Time For High Efficiency

• Surge Overload Rating to 35A Peak

• Ideally Suited for Automated Assembly

• Lead Free Finish/RoHS Compliant (Note 1)

• Green Molding Compound (No Halogen and Antimony)

(Note 2)

Mechanical Data

• Case: SMB

• Case Material: Molded Plastic. UL Flammability Classification

Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Solder Plated Terminal - Solderable per MIL-STD-

202, Method 208

• Lead Free Plating (Matte Tin Finish).

• Polarity: Cathode Band or Cathode Notch

• Marking Information: See Page 3

• Ordering Information: See Page 3

• Weight: 0.093 grams (approximate)

Maximum Ratings @TA = 25°C unless otherwise specified

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitance load, derate current by 20%.

Characteristic Symbol MURS140 MURS160 Unit

Peak Repetitive Reverse Voltage

Working Peak Reverse Voltage

DC Blocking Voltage (Note 7)

VRRM

VRWM

VR 400 600 V

RMS Reverse Voltage VR

(

RMS

)

283 424 V

Average Rectified Output Current @ TT = 135°CI

O 1.0 A

Non-Repetitive Peak Forward Surge Current

8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM 35 A

Thermal Characteristics

Characteristic Symbol Value Unit

Typical Thermal Resistance, Junction to Terminal (Note 3) R

JT 15 °C/W

Operating Temperature Range TJ -55 to +150 °C

Storage Temperature Range TSTG -55 to +175 °C

Electrical Characteristics @TA = 25°C unless otherwise specified

Characteristic Symbol Value Unit

Forward Voltage @ IF = 1.0A, TJ = 25°C

@ IF = 1.0A, TJ

=150°C VFM 1.25

1.05 V

Peak Reverse Current @ TA = 25°C

at Rated DC Blocking Voltage (Note 7) @ TA = 150°CIRM 5.0

150 μA

Reverse Recovery Time (Note 5) tr

50 ns

Forward Recovery Time (Note 6) tf

50 ns

Typical Total Capacitance (Note 4) CT 10 pF

Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.

2. Product manufactured with Data Code 0924 (week 24, 2009) and newer are built with Green Molding Compound.

3. Unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink.

4. Measured at 1.0MHz and applied reverse voltage of 4V DC.

5. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5.

6. Measured with IF = 1.0A, di/dt = 100A/μs, Duty Cycle ≤ 2.0%.

7. Short duration pulse test used to minimize self-heating effect.

Top View Bottom View



Green

MURS140 - MURS 160

Document number: DS30130 Rev. 10 - 2 2 of 4

www.diodes.com September 2010

MURS140 - MURS160

020406080100120

I, AVE

(A)

T , TERMINAL TEMPERATURE ( C)

Fig. 1 Forward Current Derating Curve

0140 160

Single Phase Half Wave 60Hz

Resistive or Inductive Load

Fig. 2 T ypical Forward Characteristics

110100

EAK

D S

(A)

FSM

NUMBER OF CYCLES AT 60Hz

Fig. 3 Surge Current Derating Curve

Pulse Width 8.3ms

Single Half-Sin e-W ave

2 5 20 50

1.0

040 12020 140

Fig. 4 Typical Reverse Characteristics

V , REVERSE VOLTAGE (V)

I , REVERSE CURRENT (

mA)

MURS140 - MURS 160

Document number: DS30130 Rev. 10 - 2 3 of 4

www.diodes.com September 2010

MURS140 - MURS160

Ordering Information (Note 8)

Part Number Case Packaging

MURS140-13-F SMB 3000/Tape & Reel

MURS160-13-F SMB 3000/Tape & Reel

Notes: 8. For packaging details, go to our website at http://www.diodes.com.

Marking Information

Package Outline Dimensions

Suggested Pad Layout

SMB

Dim Min Max

A 3.30 3.94

B 4.06 4.57

C 1.96 2.21

D 0.15 0.31

E 5.00 5.59

G 0.05 0.20

H 0.76 1.52

J 2.00 2.50

All Dimensions in mm

SMB

Dimensions Value (in mm)

Z 6.7

G 1.8

X 2.3

Y 2.5

C 4.3

U1xB = Product type marking code

U1GB = MURS140

U1JB = MURS160

= Manufacturers’ code marking

YWW = Date code marking

Y = Last digit of year (ex: 2 for 2002)

WW = Week code (01 to 53)

YWW

U1xB

MURS140 - MURS 160

Document number: DS30130 Rev. 10 - 2 4 of 4

www.diodes.com September 2010

MURS140 - MURS160

IMPORTANT NOTICE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes

without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the

application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or

trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume

all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated

website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.

Should Customers purchase or use Diodes Incorporated p roducts for any unintended or una uthorized application, Customers shall indemnify and

hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or

indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by one or more United States, international or foreign p atents pending. Product names and markings

noted herein may also be covered by one or more United States, international or foreign trademarks.

LIFE SUPPORT

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express

written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:

1. are intended to implant into the body, or

2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the

labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the

failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and

acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their pro ducts and an y

use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related

information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its

representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.