MCC GBL005 THRU GBL10 omponents 20736 Marilla Street Chatsworth !"# $ % !"# 4.0 Amp Glass Passivated Single-Phase Rectifiers 50 to 1000 Volts Features * * * * * High case dielectric strength Glass passivated chip junction, Plastic package High surge current capability Typical IR less than 0.1uA Ideal for printed circuit boards Maximum Ratings * * O GBL O Operating Temperature: -55 C to +150 C Storage Temperature: -55OC to +150OC MCC Part Number GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage Maximum DC Blocking Voltage 35V 70V 140V 280V 420V 560V 700V 50V 100V 200V 400V 600V 800V 1000V Electrical Characteristics @ 25C Unless Otherwise Specified Maximum Average Forward Current Peak Forward Surge Current Rating for fusing Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance GBL005-04 GBL06-10 Typical thermal resistance per leg IF(AV) O (1) IFSM 4.0 A 3.0A 150A I2t 93A2sec VF 1.0V t<8.3ms IFM = 4.0A; TA = 25OC IR 5.0uA 500uA TA = 25OC TA = 125OC CJ 95pF 40pF 22OC/W 3.5OC/W TC = 50 C TA = 40OC(2) 8.3ms, half sine Measured at 1.0MHz, VR=4.0V RJA RJL Note:1.Unit mounted on 3.0x3.0x0.11" thick(7.5x7.5x0.3cm)Al. plate 2. Unit mounted on P.C.B. at 0.375"(9.5mm) lead length and 0.5x0.5"(12x12mm) copper pads Revision: 1 DIM A B C D E G H J K L M N DIMENSIONS INCHES MM MIN MAX MIN MAX 0.125 X 0.125 3.17 X 3.17 .815 .825 20.7 20.9 .411 .421 10.4 10.7 .682 .718 17.3 18.2 .075 .098 1.9 2.5 .040 .050 1.02 1.27 .075 .098 1.9 2.5 .080 .095 2.03 2.41 .060 .080 1.05 2.03 .030 .040 0.76 1.02 .018 .022 0.46 0.56 .128 .140 3.25 3.56 www.mccsemi.com NOTE X 45 2003/10/13 MCC GBL005 thru GBL10 Fig. 2 -- Maximum Non-Repetitive Peak Forward Surge Current Per Leg 5.0 60 Hz Resistive or Inductive Load Heat-Sink Mounting 3.0 x 3.0 x 0.11" Thick (7.5 x 7.5 x 0.3cm) Aluminum Plate 4.0 3.0 2.0 P.C.B. Mounting 0.47 x 0.47" (12 x 12mm) Copper pads with 0.375" (9.5mm) lead length 1.0 Peak Forward Surge Current (A) Average Forward Output Current (A) Fig. 1 -- Derating Curves Output Rectified Current 0 150 TJ = TJ max. Single Sine-Wave (JEDEC Method) 100 50 1.0 Cycle 0 0 10 1 150 100 50 Fig. 4 -- Typical Reverse Leakage Characteristics Per Leg 100 Instantaneous Reverse Current (A) Instantaneous Forward Current (A) Fig. 3 -- Typical Forward Voltage Characteristics Per Leg 10 1 0.1 TJ = 25C Pulse width = 300s 1% Duty Cycle 0.01 0.4 0.6 1.0 0.8 1.2 1.4 500 100 0.1 TA = 25C 0.01 0 1.6 100 50 -- 400V 600 -- 1000V Reverse Voltage (V) Revision: 1 100 80 60 Fig. 6 -- Typical Transient Thermal Impedance Per Leg Transient Thermal Impedance (C/W) Junction Capacitance (pF) TJ = 25C f = 1.0MHz Vsig = 50mVp-p 10 40 20 Percent of Rated Peak Reverse Voltage (V) 1,000 1 50 -- 400V 600 -- 1000V 1 Fig. 5 -- Typical Junction Capacitance Per Leg 0.1 TA = 125C 10 Instantaneous Forward Voltage (V) 10 100 Number of Cycles at 60Hz Ambient Temperature (C) 100 100 10 1 0.1 0.01 0.1 1 10 100 t, Heating Time (sec.) www.mccsemi.com 2003/10/13