A110LR09A00GM - ANAREN - Product.Network

Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057

800.411.6596 / http://www.anaren.com / air@anaren.com

 Frequency range: 902-928 MHz (N. America)

and 868-870 MHz (Europe)

 FCC, IC and ETSI compliant, shielded package

 Digital RSSI output

 Programmable output power up to +10dBm

 High sensitivity (-112 dBm at 1.2 kBaud, 915

MHz 1% packet error rate)

 Ultra-small package size 9 x 16 x 2.5mm

 LGA footprint

 RoHS compliant

 Operating temperature -40 to +85C

 Impedance-controlled, multi-layer PCB

 1.8 to 3.6 VDC

 Low current consumption (15 mA in RX, 1.2

kBaud, 915 MHz)

 200 nA sleep mode current consumption

 Efficient SPI interface; all registers can be

programmed with one “burst” transfer

 Available in tape & reel and matrix tray

A110LR09A

The A110LR09A is a ULTRA low cost, high-performance, FCC & IC certi-

fied radio module that incorporates the Texas Instruments CC110L “value

line” transceiver chip in the industry’s smallest package (9 x 16 x 2.5mm).

110L Series

Features Benefits

Block diagram

This product shall not be used in any of the following products or systems

without prior express written permission from Anaren Microwave, Inc:

(i) implantable cardiac rhythm management systems, including without

limitation pacemakers, defibrillators and cardiac resynchronization devices;

(ii) external cardiac rhythm management systems that communicate

directly with one or more implantable medical devices; or

(iii) other devices used to monitor or treat cardiac function, including without

limitation pressure sensors, biochemical sensors and neurostimulators.

 Minimal RF engineering experience necessary

 No additional “Intentional Radiator” certifica-

tion required (FCC CFR 47 Part 15, IC RSS-

210)

 Minimal real estate required

 Easily implemented on a two layer PCB

 No additional harmonic filtering required

 100% RF-tested in production

 Common footprint for product family

 No additional DC decoupling required

 Integrated analog temperature sensor

 Excellent receiver selectivity and blocking

performance

 Suitable for frequency hopping systems,

thanks to a fast-settling frequency synthesizer

with 90 μs settling time

 Impedance-matched balun for optimized effi-

ciency

 Support for asynchronous and synchronous

serial receive/transmit mode for backwards

compatibility with existing radio communica-

tion protocols

PLEASE NOTE: Additional information on the Texas Instruments CC110L

device can be found in the company’s latest datasheet release at

http://www.ti.com

Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057

800.411.6596 / http://www.anaren.com / air@anaren.com

Product overview

Nomenclature

Caution! ESD sensitive device.

Precautions should be used when

handling the device in order to

prevent permanent damage.

The A110LR09A is a high-performance, dual-

band FCC & IC certified and ETSI compliant radio

module that incorporates the Texas Instruments

CC110L “value line” low-cost transceiver chip in

the industry’s smallest package (9 x 16 x 2.5mm)

and is compatible with all TI-approved software

stacks.

With an LGA pad footprint, this module is de-

signed to effortlessly integrate into a wide range

of applications, including: industrial control, build-

ing automation, low-power wireless sensor net-

works, lighting control, and automated meter

reading.

The A110LR09A has an RoHS-compliant ENIG

finish and is packaged on tape and reel for high-

volume automated manufacturing.

Footprint

Pin diagram

A (Anaren)

1 Chip series (CC1101, CC110L, CC2500)

2 Function (R = radio only)

3 Frequency band (x100MHz)

4 Form factor (A = Internal Antenna, C = Connector)

5 Design ID (00 = Default)

6 Application (G = General)

7 Packaging (R = Tape/Reel, M = Matrix Tray)

1150b

Refer to User’s Manual for additional layout guidelines.

Dimensions in mm.

DNC = Do Not Connect