Product catalogue | Functional Electronics | Power supplies | Primary switched-mode power supply unit | Connect Power single-phase General ordering data Order No. Part designation Version EAN Qty. 9927480024 CP SNT 55W 24-28V 2.3A Switched-mode power supplies, 85...265 V AC, 120...300 V DC , single-phase, 24...28 V DC 4032248217595 1 pc(s). Input Connection system Input current Input current at 115 Vac Input current at 125 Vdc Input current at 230 Vac Input current at 250 Vdc Input frequency Input fuse Input voltage Max. connection range Surge protection Turn-on current limit Screw connection 1.1 A @ 115 V AC; 0.55 A @ 230 V AC 1.10 A RMS +/- 20% 590 mA +/- 20% 0.55 A RMS +/- 20% 315 mA +/- 20% 50/ 60 Hz 2 A time-lag fuse (internal) 85...265 V AC, 120...300 V DC AWG26-12 (0.1-4.0 mm) Varistor Thermistor output Connection system Control at 10...100% load Control at input voltage Mains failure bridge-over time for 115 V AC Mains failure bridge-over time for 230 V AC Max. capacitance at output Max. connection range Max. output power Max. residual ripple Output current Output voltage Overload protection Screw connection 1% 0.8 % 30 ms 180 ms 10000 F AWG26-12 (0.1-4.0 mm) 55 V < 50 mV 2.3 A 24...28 V DC / thermal cut-out -1- Product catalogue | Functional Electronics | Power supplies | Primary switched-mode power supply unit | Connect Power single-phase output Parallel connection option No General data DIN Rail compatibility Degree of efficiency at max. load EMC standards Housings Low Voltage Directive Power factor correction Standards Status indication Switching frequency Weight Ambient temperature (operational) Storage temperature TS 35 78 % IEC 61000-6 /-2, -3 metal 73/ 23/ EWG No EN 50178, EN 60950, IEC950 Green LED 100 kHz 478 g -20 C...+40 C -40 C...+85 C Insulation coordination Galvanic isolation, I/O rail Galvanic isolation, input-earth Galvanic isolation, input-output Galvanic isolation, output-earth Humidity at operating temperature Humidity at storage temperature Protection class 3 kV 1.5 kV 3 kV 0.5 kV 20 - 85% RH without condensation 20 - 90% RH IP 20 Dimensions Clamping range, max. Clamping range, min. Clamping range, nom. Length Height Width 4 mm 0.1 mm 4 mm 131 mm 98 mm 57 mm Approvals Approvals institutes Classifications ETIM 2.0 ETIM 3.0 eClass 4.1 eClass 5.0 eClass 5.1 EC001039 EC001039 27-24-04-10 27-24-22-13 27-24-22-13 Similar products -2- Product catalogue | Functional Electronics | Power supplies | Primary switched-mode power supply unit | Connect Power single-phase Order No. 9925340024 Part designation CP SNT 160W 24-28V 6.5A 9916250024 CP SNT 300W 24V 12.5A 9927480005 CP SNT 55W 5V 3A 9925340012 CP SNT 160W 12-15V 8A 9927480012 CP SNT 55W 12-15V 3A 9925340005 CP SNT 160W 5V 8A 9927480048 CP SNT 55W 48V 1.04A 9925340048 CP SNT 160W 48V 3.5A Version Switched-mode power supplies, Min. 85/138 V AC, max. 195/250 V AC, typ. 115...230 V AC , single-phase, 24...28 V DC Switched-mode power supplies, 86...265 V AC, 100...200 V DC; type 115...230 V AC , single-phase, 22...28 V DC adjustable Switched-mode power supplies, 85...265 V AC, 120...300 V DC , single-phase, 5 V DC Switched-mode power supplies, Min. 85/138 V AC, max. 195/250 V AC, typ. 115...230 V AC , single-phase, 12...15 V DC Switched-mode power supplies, 85...265 V AC, 120...300 V DC , single-phase, 12...15 V DC Switched-mode power supplies, Min. 85/138 V AC, max. 195/250 V AC, typ. 115...230 V AC , single-phase, 5 V DC Switched-mode power supplies, 85...265 V AC, 120...300 V DC , single-phase, 48 V DC Switched-mode power supplies, Min. 85/138 V AC, max. 195/250 V AC, typ. 115...230 V AC , single-phase, 48 V DC -3-