POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2002 POWERSEM reserves the right to change limits, test conditions and dimensions
Preliminary Data Sheet
Features
●International standard package,
JEDEC TO-240 AA
●Direct copper bonded Al2O3 -ceramic
base plate
●Planar passivated chips
●Isolation voltage 3600 V~
●UL registered, E 148688
●Gate-cathode twin pins for version 1
Applications
●DC motor control
●Softstart AC motor controller
●Light, heat and temperature control
Advantages
●Space and weight savings
●Simple mounting with two screws
●Improved temperature and power
cycling capability
●Reduced protection circuits
Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated.
PSKT 19 ITRMS = 2x 40 A
ITAVM = 2x 25 A
VRRM = 800-1600 V
Thyristor Modules
VRSM VRRM Type
VDSM VDRM
V V Version 1 Version 8
900 800 PSKT 19-08io1 PSKT 19-08io8
1300 1200 PSKT 19-12io1 PSKT 19-12io8
1500 1400 PSKT 19-14io1 PSKT 19-14io8
1700 1600 PSKT 19-16io1 PSKT 19-16io8
Symbol Test Conditions Maximum Ratings
ITRMS TVJ = TVJM 40 A
ITAVM TC = 58°C; 180° sine 25 A
TC = 85°C; 180° sine 18 A
ITSM TVJ = 45°C; t = 10 ms (50 Hz), sine 400 A
VR = 0 t = 8.3 ms (60 Hz), sine 420 A
TVJ = TVJM t = 10 ms (50 Hz), sine 350 A
VR = 0 t = 8.3 ms (60 Hz), sine 370 A
∫∫
∫∫
∫i2dt TVJ = 45°C t = 10 ms (50 Hz), sine 800 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 730 A2s
TVJ = TVJM t = 10 ms (50 Hz), sine 600 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 570 A2s
(di/dt)cr TVJ = TVJM repetitive, IT = 45 A 150 A/µs
f =50 Hz, tP =200 µs
VD = 2/3 VDRM
IG = 0.45 A non repetitive, IT = ITAVM 500 A/µs
diG/dt = 0.45 A/µs
(dv/dt)cr TVJ = TVJM;V
DR = 2/3 VDRM 1000 V/µs
RGK = ∞; method 1 (linear voltage rise)
PGM TVJ = TVJM tP = 30 µs 10 W
IT = ITAVM tP = 300 µs 5 W
PGAV 0.5 W
VRGM 10 V
TVJ -40...+125 °C
TVJM 125 °C
Tstg -40...+125 °C
VISOL 50/60 Hz, RMS t = 1 min 3000 V~
IISOL ≤ 1 mA t = 1 s 3600 V~
MdMounting torque (M5) 2.5-4.0/22-35 Nm/lb.in.
Terminal connection torque (M5) 2.5-4.0/22-35 Nm/lb.in.
Weight Typical including screws 90 g
Version 8
Version 1
3671 542
361 52
6745
3
2
1
TO-240 AA
http://store.iiic.cc/
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2002 POWERSEM reserves the right to change limits, test conditions and dimensions
Symbol Test Conditions Characteristic Values
IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM 3mA
VTIT= 80 A; TVJ = 25°C 2.05 V
VT0 For power-loss calculations only (TVJ = 125°C) 0.85 V
rT18 mΩ
VGT VD = 6 V; TVJ = 25°C 1.5 V
TVJ = -40°C 1.6 V
IGT VD = 6 V; TVJ = 25°C 100 mA
TVJ = -40°C 200 mA
VGD TVJ = TVJM;V
D = 2/3 VDRM 0.2 V
IGD 10 mA
ILTVJ = 25°C; tP = 10 µs; VD = 6 V 450 mA
IG = 0.45 A; diG/dt = 0.45 A/µs
IHTVJ = 25°C; VD = 6 V; RGK = ∞200 mA
tgd TVJ = 25°C; VD = 1/2 VDRM 2µs
IG = 0.45 A; diG/dt = 0.45 A/µs
tqTVJ = TVJM; IT = 20 A, tP = 200 µs; -di/dt = 10 A/µs typ. 15 0 µ s
VR = 100 V; dv/dt = 20 V/µs; VD = 2/3 VDRM
QSTVJ = TVJM; IT = 25 A, -di/dt = 0.64 A/µs 50 mC
IRM 6A
RthJC per thyristor; DC current 1.3 K/W
per module other values 0.65 K/W
RthJK per thyristor; DC current see Fig. 8/9 1.5 K/W
per module 0.75 K/W
dSCreepage distance on surface 12.7 m m
dAStrike distance through air 9.6 m m
aMaximum allowable acceleration 50 m/s2
Optional accessories for module-type PSKT 19 version 1 B
Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red
Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385,
Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1
Dimensions in mm (1 mm = 0.0394")
Version 1 Version 8
10 100 1000
1
10
100
1000
100101102103104
0.1
1
10
IG
VG
mA
mA
IG
1: IGT, TVJ = 125°C
2: IGT, TVJ = 25°C
3: IGT, TVJ = -40°C
µs
tgd
V
4: PGAV = 0.5 W
5: PGM = 5 W
6: PGM = 10 W
IGD, TVJ = 125°C
3
4
2
1
56
Limit
typ.
TVJ = 25°C
Fig. 1 Gate trigger characteristics
Fig. 2 Gate trigger delay time
http://store.iiic.cc/
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2002 POWERSEM reserves the right to change limits, test conditions and dimensions
Fig. 3 Surge overload current
ITSM: Crest value, t: duration
Fig. 4 ∫i2dt versus time (1-10 ms) Fig. 4a Maximum forward current
at case temperature
Fig. 5 Power dissipation versus on-
state current and ambient
temperature (per thyristor)
Fig. 6 Three phase rectifier bridge:
Power dissipation versus direct
output current and ambient
temperature
Circuit
B 6
3 x PSKT 19
http://store.iiic.cc/
2002 POWERSEM reserves the right to change limits, test conditions and dimensions
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
Fig. 7 Three phase AC-controller:
Power dissipation versus RMS
output current and ambient
temperature
Fig. 8 Transient thermal impedance
junction to case (per thyristor)
RthJC for various conduction angles d:
d RthJC (K/W)
DC 1.3
180° 1.35
120° 1.39
60° 1.42
30° 1.45
Constants for ZthJC calculation:
iR
thi (K/W) ti (s)
1 0.018 0.0033
2 0.041 0.0216
3 1.241 0.191
Fig. 9 Transient thermal impedance
junction to heatsink (per thyristor)
RthJK for various conduction angles d:
d RthJK (K/W)
DC 1.5
180° 1.55
120° 1.59
60° 1.62
30° 1.65
Constants for ZthJK calculation:
iR
thi (K/W) ti (s)
1 0.018 0.0033
2 0.041 0.0216
3 1.241 0.191
4 0.2 0.46
Circuit
W 3
3 x PSKT 19
PSKT 19
ZthJC(t)
PSKT 19
ZthJK(t)
http://store.iiic.cc/
