3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M and MetPak are trademarks of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
•6.50 Amps per contact
•End-to-end stackable
•Press or heat stake peg (solder tail)
•Futurebus+® compatible
•See the Regulatory Information Appendix (RIA)
in the “RoHS compliance” section of
www.3Mconnectors.com for compliance
information (RIA E1 & C1 apply)
Date Modified: February 14, 2017 TS-1125-E
Sheet 1 of 4
Physical
Insulation:
Material: High Temperature LCP
Flammability: UL 94V-0
Color: Beige
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 μ” [1.27 μm] Nickel
Wiping Area: See Ordering Information
Tails: See Ordering Information
Electrical
Current Rating: Power: 6.50 A per power socket contact at 70°C
Insulation Resistance: 103 MΩ
Withstanding Voltage: 1,500 V
AC for 60 seconds
Environmental
Temperature Rating: -55° C to 125° C
Process Temperature Rating: 260°C (Profile per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
UL File No.: E68080 Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE)
3
Electronic Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M and MetPak are trademarks of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
TS-1125-E
Sheet 2 of 4
Ordering Information
MP2-SPXX-X1XX- XXXXX
mm
(Inch)
Tolerance Unless Noted
0 0.0 0.00
mm ±3 ±0.3 ±0.13
( ) Dimensions used for
Reference Only
8.00
.315
23.0
.91
12.45
.490
11.30
.445
13.80
.543
ROW
5 ROW PRODUCT
C
D
E
A
B
12.45
.490
21.0
.83
11.80
.465
6.00
.236
2.00
.079
TYP.
13.50
.531
9.30
.366
2.00
.079 5X
POSITION 2
FOR SPECIAL MONOBLOCKS
CONTACT 3M SALES
REPRESENTATIVE
4 ROW PRODUCT
11.95
.470
3.00
.118
10.00
.394
9.50
.374
POSITION 1
"B"
"A" TAIL LENGTH
SP = Power Socket Plating Options:
(See Table 3)
Note:
1. Refer to IEC 61076-4-104 Futurebus+® global standard.
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical
connection with a plated through-hole (PTH) in a printed circuit board, typically a “back plane.”
Rows
4 = 4 Rows
5 = 5 Rows
Contact Count
(See Table 1)
Tail Length
(See Table 2)
Termination Style
P = Press-Fit
M = Solder Tail (Press Peg)
3
Electronic Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M and MetPak are trademarks of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
TS-1125-E
Sheet 3 of 4
Table 1
Pin Count No of Rows
08 4
10 5
Table 2 - Tail & Post Lengths
Contact-to-PC Board Tail
Termination Option No. Dim. “A” Dim. “B”
Solder Press-Fit*
S1 2.72 [0.107] 5.20 [0.205]
S2 3.53 [0.139] 6.00 [0.256]
M1 2.72 [0.107] 3.75 [0.148]
M2 P1 3.53 [0.139] 3.75 [0.148]
*Compliant-Pin Tail
Table 3 - Plating
Plating Suffix Press-Fit Tails* Solder Tails Plating Composition
KR RIA E1 & C1 apply RIA E1 & C1 apply
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
LR RIA E1 & C1 apply RIA E1 & C1 apply
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
*Compliant-Pin Tail
3
Electronic Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M and MetPak are trademarks of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
TS-1125-E
Sheet 4 of 4
Recommended 4 Row PCB Hole
Mounting Pattern
Recommended 5 Row PCB Hole
Mounting Pattern
0.10
0.10
0.10
A1
"B"
2.00
.079
TYP.
6.00
.236
2.00
.079 3X
4.00
.157
1.00
.039
4.00
.157
8.00
.315
2.00
.079
4X
3.00
.118
2.05 +.05
-.00
.081+.002
-.000
UNPLATED THRU HOLE
1.50 +.10
-.00
.059+.004
-.000
“D” PLATED THROUGH-HOLE
UNPLATED THROUGH-HOLE
UNPLATED THROUGH-HOLE
Ø
Ø
Ø
Ø
Ø
Table 4 - HOLE PLATING FINISHES
HOLE Finished Dia.
mm [in]
Cu Thickness
mm [in]
Immersion Matte
Sn Thickness
microns [μ”]
Electrolitic Au
Thickness
microns [μ”]
OSP ENTEK
Thickness
microns [μ”]
Drilled Hole Dia.
mm [in]
“D” 0.700-0.800
[.0276-.0315]
0.025-0.045
[0.001-0.002]
0.5 - 2.5
[20 - 100]
0.1 - 0.5
[4 - 20]
0.2 - 0.5
[8 - 20]
0.830-0.860 [.0330-.0340] or
0.85mm [ #66] TWIST DRILL
3
3M Electronics Materials Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com
3M and MetPak are
trademarks of 3M Company. All
other trademarks belong to their
respective owners. Please
recycle. Printed in USA. © 3M
2017. All rights reserved.
RIA-2217B-E
Regulatory: For regulatory information about this product, contact your 3M representative.
Technical Information: The technical information, recommendations and other statements contained in this document are based upon
tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.
Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of
a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is
solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method
of application.
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging
or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product.
3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY
IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the
3M Product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or
refund of the purchase price.
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract,
negligence or strict liability.
