HMC497LP4 / 497LP4E v04.1108 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz 10 - 24 The HMC497LP4(E) is ideal for: Very Low Noise Floor: -161 dBm/Hz * UMTS, GSM or CDMA Basestations Very High Linearity: +22 dBm OIP3 * Fixed Wireless or WLL High Output Power: +9 dBm Output P1dB * ISM Transceivers, 900 & 2400 MHz High Modulation Accuracy * GMSK, QPSK, QAM, SSB Modulators DC - 700 MHz Baseband Input Functional Diagram General Description TE Features B SO LE The HMC497LP4(E) is a low noise high linearity Direct Quadrature Modulator RFIC which is ideal for digital modulation applications from 100 - 4000 MHz including; Cellular/3G, Broadband Wireless Access & ISM circuits. Housed in a compact 4x4 mm (LP4) SMT QFN package, the RFIC requires minimal external components & provides a low cost alternative to more complicated double upconversion architectures. The RF output port is single-ended and matched to 50 Ohms with no external components. The LO requires -6 to +6 dBm and can be driven in either differential or single-ended mode while the baseband inputs will support modulation inputs from DC - 700 MHz typical. This device is optimized for a supply voltage of +4.5V to +5.5V and consumes 170 mA @ +5V supply. Electrical Specifi cations, See Test Conditions on following page herein. O MODULATORS - DIRECT QUADRATURE - SMT 10 Typical Applications Parameter Min. Frequency Range, RF Typ. Max. Min. 450 - 960 Output P1dB Output Noise Floor Output IP3 +4 Max. Min. Typ. Max. Min. 2200 - 2700 Typ. Max. 3400 - 4000 Units MHz +8 +8 +7 +6 dBm -161 -159 -157 -150 dBm/Hz +17 dBm +22 Output Power Typ. 1700 - 2200 +6 +22 +3 +5 +20 +2 +5 0 +3 dBm Carrier Feedthrough (uncalibrated) -38 -36 -32 -30 dBm Sideband Suppression (uncalibrated) 43 42 33 22 dBc LO Port Return Loss 25 15 14 13 dB RF Port Return Loss 11 20 17 11 dB For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC497LP4 / 497LP4E v04.1108 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz Electrical Specifi cations, (continued) Parameter Conditions Min. Typ. Max. Units 4000 MHz RF Output RF Frequency Range 100 RF Return Loss 15 dB LO Input 100 LO Port Return Loss 3 dB Bandwidth with 50 source. Baseband Input DC Voltage (Vbbdc) Single-ended Baseband Input Capacitance DC Power Requirements Supply Voltage (Vcc1, Vcc2) Supply Current (Icc1, Icc2) DC +1.4 MHz +6 dBm +1.5 dB 700 MHz +1.6 V Single-ended. 90 A De-embed to the lead of the device. 4.5 pF See Test Conditions Below LE Baseband Input DC Bias Current (Ibbdc) 4000 15 Baseband Input Port Baseband Port Bandwidth 0 TE -6 +4.5 +5.0 +5.5 168 V mA Test Conditions: Unless Otherwise Specifi ed, the Following Test Conditions Were Used Parameter B SO Temperature Baseband Input Frequency Baseband Input DC Voltage (Vbbdc) Condition +25 C 200 kHz +1.5V Baseband Input AC Voltage (Peak to Peak Differential, I and Q) 1.6V Baseband Input AC Voltage for OIP3 Measurement (Peak to Peak Differential, I and Q) 800 mV per tone @ 150 & 250 kHz Frequency Offset for Output Noise Measurements 20 MHz Supply (Vcc1, Vcc2) +5.0V LO Input Power 0 dBm LO Input Mode Mounting Configuration Uncalibrated O Sideband & Carrier Feedthrough Single-Ended through LON Refer to HMC497LP4 Application Schematic Herein Calibrated vs. Uncalibrated Test Results During the Uncalibrated Sideband and Carrier Suppression tests, care is taken to ensure that the I/Q signal paths from the Vector Signal Generator (VSG) to the Device Under Test (DUT) are equal. The "Uncalibrated, +25 C" Sideband and Carrier Suppression plots were measured at room temperature, while the "Uncalibrated, over Temperature" Sideband and Carrier Suppression plots represent the worst case uncalibrated suppression levels measured at T= -40 C, +25 C, and +85 C. The "Calibrated, + 25 C" Sideband Suppression data was plotted after a manual adjustment of the I/Q amplitude balance and I/Q phase offset (skew) at +25 C, and at each LO input power level. The +25 C adjustment settings were held constant during tests over temperature. The "Calibrated, over Temperature" plots represent the worst case calibrated Sideband Suppression levels at T= -40 C, +25 C, and +85 C. The "Calibrated, +25 C" Carrier Suppression data was plotted after a manual adjustment of the Ip/In & Qp/Qn DC offsets at +25 C, and at each LO input power level. The +25 C adjustment settings were held constant during tests over temperature. The "Calibrated, over Temperature" plots represent the worst case Carrier Suppression levels measured at T= -40 C, +25 C, and +85 C. For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 MODULATORS - DIRECT QUADRATURE - SMT LO Frequency Range LO Input Power 10 - 25 HMC497LP4 / 497LP4E v04.1108 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz OUTPUT P1dB (dBm), OUTPUT IP3 (dBm) 0 +25C +85C -40C -5 -10 0 400 800 1200 1600 2000 2400 2800 3200 3600 4000 OUTPUT P1dB 10 +25C +85C -40C 0 -140 -150 -10 -160 NOISE FLOOR -20 400 SET-UP NOISE FLOOR -170 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) Calibrated Carrier Feedthrough [1] vs. Frequency 10 0 -10 +25C +85C -40C -20 -30 -40 -50 -60 -70 0 B SO CARRIER FEEDTHROUGH (dBm) -130 LE Uncalibrated Carrier Feedthrough [1] vs. Frequency 400 0 -10 -20 -30 -50 -60 -70 800 1200 1600 2000 2400 2800 3200 3600 4000 O Sideband Suppression vs. Frequency 0 400 Return Loss vs. Frequency -5 +25C +85C -40C -30 -40 -50 RETURN LOSS (dB) 0 0 -20 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) 10 -10 +25C +85C -40C -40 FREQUENCY (MHz) SIDEBAND SUPPRESSION (dBc) MODULATORS - DIRECT QUADRATURE - SMT OUTPUT IP3 0 FREQUENCY (MHz) 10 -120 20 CARRIER FEEDTHROUGH (dBm) OUTPUT POWER (dBm) 10 5 30 OUTPUT NOISE FLOOR @ 20 MHz (dBm/Hz) 10 Output IP3, P1dB & Noise Floor @ 20 MHz Offset vs. Frequency TE Wideband Performance vs. Frequency RF LO -10 -15 -20 -25 -30 -60 -70 -35 0 400 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) 0 400 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) [1] See note titled "Calibrated vs. Uncalibrated test results" herein. 10 - 26 For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC497LP4 / 497LP4E v04.1108 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz 0 -30 SIDEBAND SUPPRESSION -5 -45 0 400 -60 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) 0 -150 NOISE FLOOR -10 -20 400 -160 SET-UP NOISE FLOOR -170 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) 10 0 -10 -6 dBm 0 dBm +6 dBm -20 -30 -40 -50 -60 -70 0 400 0 -10 -20 -40 -50 -60 -70 800 1200 1600 2000 2400 2800 3200 3600 4000 0 400 -10 -15 -20 -25 0 -30 SIDEBAND SUPPRESSION -35 -40 -5 -45 -50 -55 -10 0 400 FREQUENCY (MHz) -60 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) 30 -120 OUTPUT IP3 20 -130 OUTPUT P1dB 10 0 -140 -150 NOISE FLOOR -10 -160 MEASUREMENT NOISE FLOOR -20 0 400 OUTPUT NOISE FLOOR (dBm/Hz) OUTPUT POWER OUTPUT P1dB (dBm), OUTPUT IP3 (dBm) -5 SIDEBAND SUPPRESSION (dBc) O 0 5 800 1200 1600 2000 2400 2800 3200 3600 4000 Output IP3, P1dB & Noise Floor @ 20 MHz vs. Offset Frequency Over Supply Voltage [1] Wideband Performance vs. Frequency Over Supply Voltage [1] 10 -6 dBm 0 dBm +6 dBm -30 FREQUENCY (MHz) OUTPUT POWER (dBm) -140 Calibrated Carrier Feedthrough [2] vs. Frequency B SO CARRIER FEEDTHROUGH (dBm) OUTPUT P1dB 10 0 Uncalibrated Carrier Feedthrough [2] vs. Frequency 10 -130 LE -10 20 -170 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (GHz) 10 MODULATORS - DIRECT QUADRATURE - SMT -15 -120 OUTPUT IP3 CARRIER FEEDTHROUGH (dBm) OUTPUT POWER (dBm) 5 SIDEBAND SUPPRESSION (dBc) OUTPUT POWER 30 TE 0 OUTPUT NOISE FLOOR @ 20 MHz (dBm/Hz) 10 OUTPUT P1dB (dBm), OUTPUT IP3 (dBm) Output IP3, P1dB & Noise Floor @ 20 MHz Offset vs. Frequency Over LO Power [3] Wideband Performance vs. Frequency Over LO Power [3] [1] See note titled "Calibrated vs. Uncalibrated test results" herein. [2] Supply voltage from +4.5 to +5.5V. [3] LO Power from -6 dBm to +6 dBm For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 27 HMC497LP4 / 497LP4E v04.1108 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz ACPR & Output Noise for W-CDMA @ 2140 MHz Output Noise @ 20 MHz Offset vs. LO Power Over Temperature ACPR (dBc) -140 -70 1 Carrier ACPR -150 1 Carrier NF 2 Carrier NF -75 10 -80 -30 -27 -24 -21 -18 -160 -15 -12 -9 -6 -3 0 -170 RF Power +5 dBm -150 T=+25C T=+85C T= -40C -155 -160 -165 -6 CARRIER OUTPUT POWER (dBm) -5 -4 -3 -2 -1 0 1 2 3 4 5 LE Compression Characteristic @ 2140 MHz Power & Linearity @ 2140 MHz vs. Baseband Voltage 25 10 10 6 LO POWER (dBm) 2 TONES OUTPUT POWER (dBm) 3rd ORDER INTERMOD (dBm) -10 -20 -30 -40 -50 0.8 B SO POWER (dBm) 0 OUTPUT POWER (dBm) 9 0.9 1 OUTPUT IP3 8 5 3 5 2 0 0 0.8 0.9 1 2 INPUT BASEBAND VOLTAGE (Vp-p diff) Single Tone O Single Tone EVM vs. LO Harmonic Level & Sideband Rejection for EDGE @ 1900 MHz 1200 2000 1100 EVM (m%rms) 1800 2 rd 1600 EVM (m%rms) SBR: -40 dBc 900 800 LO 2 nd 10 OUTPUT POWER 4 INPUT BASEBAND VOLTAGE PER TONE (Vp-p diff) 1000 15 6 1 2 EVM vs. LO Harmonic Level & Sideband Rejection for EDGE @ 900 MHz 20 7 OIP3 (dBm) MODULATORS - DIRECT QUADRATURE - SMT -145 TE 2 Carrier ACPR -65 -140 OUTPUT NOISE @20 MHz (dBm/Hz) -130 OUTPUT NOISE @ 20 MHz Offset (dBm/Hz) -60 Harmonic Level -30 dBc 700 -16 dBc LO 3 Harmonic Level -70 dBc 1400 -30 dBc SBR: -42 dBc 2 1200 1000 600 SBR: -48 dBc 500 800 2 SBR: -48 dBc 2 600 400 -70 -65 -60 -55 -50 -45 -40 -35 -30 rd LO 3 Harmonic Level (dBc) -30 -25 -20 -15 -10 -5 nd LO 2 Harmonic Level (dBc) Note 1: W-CDMA (Modulation Set-up for ACPR Mode); The Baseband I and Q input signals were generated using "Test Model 1 with 64 channels" settings in the Agilent E3844C. Note 2: The I/Q baseband amplitude and phase inputs were offset to achieve Sideband Rejection (SBR) levels. LO = +6 dBm, SSB Power = 0 dBm 10 - 28 For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC497LP4 / 497LP4E v04.1108 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz Absolute Maximum Ratings Baseband Input Voltage (AC + DC) (Reference to GND) 0.0V to +2.8V Channel Temperature 150 C Continuous Pdiss (T = 85C) (Derate 30 mW/C above 85C) 1.8 Watts Thermal Resistance (Rth) (junction to lead) 34 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS B SO Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY O 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC497LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC497LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H497 XXXX [2] H497 XXXX 10 MODULATORS - DIRECT QUADRATURE - SMT +18 dBm TE 0V to +6V LO Input Power LE Vcc1, Vcc2 [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 29 HMC497LP4 / 497LP4E v04.1108 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz Pin Descriptions 10 - 30 Description 1,6, 7, 13, 15 N/C Not connected. 2, 5, 8, 11, 12, 14, 17, 19, 20, 23 GND These pins and the ground paddle should be connected to a high quality RF/DC ground. 3, 4 LOP, LON LO inputs. Need DC decoupling capacitors. The ports could be driven single ended or differentially. 9, 10 QN, QP Q channel differential baseband input. These high impedance ports should be biased around 1.5V DC. Nominal recommended baseband input is around 1.6V pp differential. 18 LE B SO 16 Interface Schematic TE Function RFOUT RF output. 50 Ohms. Needs DC blocking capacitor. Vcc1 Supply voltage for the mixer and output stages 79mA @ +5.0V. 21, 22 IP, IN I channel differential baseband input. These high impedance ports should be at the same bias voltage (VbbDC) as Qn & Qp. 24 Vcc2 Supply voltage for the LO stage 88mA @ +5V. O MODULATORS - DIRECT QUADRATURE - SMT 10 Pin Number For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC497LP4 / 497LP4E v04.1108 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz O List of Materials for Evaluation PCB 108962 [1] Item Description J1 - J7 PC Mount SMA Connector J8, J9 DC Molex Connector C1 - C3 100 pF Chip Capacitor, 0402 Pkg. C4, C5 1000 pF Chip Capacitor, 0402 Pkg. C6, C7 4.7 uF, Case A, Tantulum U1 HMC497LP4 Modulator PCB [2] 108960 Eval Board The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 MODULATORS - DIRECT QUADRATURE - SMT B SO LE TE Evaluation PCB 10 - 31 HMC497LP4 / 497LP4E v03.0307 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz TE Application & Evaluation PCB Schematic 10 - 32 LE B SO Characterization Set-up O MODULATORS - DIRECT QUADRATURE - SMT 10 For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC497LP4 / 497LP4E v03.0307 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 MODULATORS - DIRECT QUADRATURE - SMT O B SO LE TE Notes: 10 - 33