HMC712LP3C / 712LP3CE v00.0209 ATTENUATORS - ANALOG - SMT 5 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 26.5 GHz Typical Applications Features The HMC712LP3C(E) is ideal for: Wide Bandwidth: 5 - 26.5 GHz * Point-to-Point Radio Excellent Linearity: +28 dBm Input P1dB * VSAT Radio Wide Attenuation Range: 28 dB * Test Instrumentation Absorptive Topology * Microwave Sensors Singe or Dual Control Operation * Military, ECM & Radar 16 Lead 3x3mm SMT Package: 9mm2 Functional Diagram General Description The HMC712LP3C(E) is an absorptive Voltage Variable Attenuator (VVA) which operates from 5 - 26.5 GHz and is ideal in designs where an analog DC control signal must be used to control RF signal levels over a 28 dB amplitude range. It features two shunt-type attenuators which are controlled by two analog voltages, Vctrl1 and Vctrl2. Optimum linearity performance of the attenuator is achieved by first varying Vctrl1 of the 1st attenuation stage from -3V to 0V with Vctrl2 fixed at -3V. The control voltage of the 2nd attenuation stage, Vctrl2, should then be varied from -3V to 0V, with Vctrl1 fixed at 0V. The HMC712LP3C(E) is housed in a RoHS compliant 3x3 mm QFN leadless package However, if the Vctrl1 and Vctrl2 pins are connected together it is possible to achieve the full analog attenuation range with only a small degradation in input IP3 performance. Applications include AGC circuits and temperature compensation of multiple gain stages in microwave point-to-point and VSAT radios. Electrical Specifi cations, TA = +25 C, 50 Ohm system Parameter Typ. Max. Units 3.5 4.5 5.5 dB dB dB Attenuation Range 28 dB Input Return Loss 12 dB Insertion Loss 5 - 210 Min. 5 - 16 GHz 16 - 24 GHz 24 - 26.5 GHz Output Return Loss 10 dB Input Power for 1 dB Compression (any attenuation) 28 dBm Input Third Order Intercept (Two-tone Input Power = 10 dBm Each Tone) 32 dBm For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC712LP3C / 712LP3CE v00.0209 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 26.5 GHz 5 Attenuation vs. Frequency over Vctrl Vctrl1 = 0V, Vctrl2 = Variable Attenuation vs. Frequency over Vctrl Vctrl1 = Variable, Vctrl2 = -3V 0 ATTENUATION (dB) ATTENUATION (dB) -10 -5 -10 -3.0 V -1.6 V -1.2 V -0.6 V 0.0 V -20 -30 -3.0 V -1.8 V -1.4 V -0.8 V 0.0 V -40 -15 -50 2 6 10 14 18 22 26 30 2 6 10 FREQUENCY (GHz) 14 18 22 26 30 FREQUENCY (GHz) Attenuation vs. Vctrl1 Over Temperature @ 10 GHz, Vctrl2 = -3V Attenuation vs. Vctrl2 Over Temperature @ 10 GHz, Vctrl1 = 0V 0 0 -5 ATTENUATION (dB) ATTENUATION (dB) -2 -4 -6 +25 C +85 C -40 C -8 -10 -15 -20 +25 C +85 C -40 C -25 ATTENUATORS - ANALOG - SMT 0 -30 -10 -35 -3 -2.5 -2 -1.5 -1 -0.5 -3 0 -2.5 -2 Vctrl1 (V) -1.5 -1 -0.5 0 Vctrl2 (V) Attenuation vs. Pin @ 10 GHz Vctrl1 = Variable, Vctrl2 = -3V Input Return Loss Vctrl1 = Variable, Vctrl2 = -3V 0 0 RETURN LOSS (dB) ATTENUATION (dB) -2 -4 -6 -8 -3.0 V -1.8 V -1.4 V -10 -1.0 V -0.4 0.0 V -12 -10 -20 -3.0 V -1.2 V 0.0 V -30 -40 0 5 10 INPUT POWER (dBm) 15 20 2 6 10 14 18 22 26 30 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 211 HMC712LP3C / 712LP3CE v00.0209 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 26.5 GHz 5 Output Return Loss Vctrl1 = Variable, Vctrl2 = -3V Input Return Loss Vctrl1 = 0V, Vctrl2 = Variable -10 RETURN LOSS (dB) RETURN LOSS (dB) 0 -20 -3.0 V -1.4 V 0.0 V -30 -20 -30 2 6 10 14 18 22 26 30 2 6 10 FREQUENCY (GHz) 14 18 22 26 30 FREQUENCY (GHz) Output Return Loss Vctrl1 = 0V, Vctrl2 = Variable Input IP3 vs Input Power @ 10 GHz Vctrl1 = Variable, Vctrl2 = -3V 0 60 50 IP3 (dBm) -10 40 30 -20 -3.0 V -1.4 V 0.0 V -3.0 V -2.0 V -1.6 V -1.0 V 0.0 V 20 -30 10 2 6 10 14 18 22 26 30 0 5 10 15 20 FREQUENCY (GHz) SINGLE TONE INPUT POWER (dBm) Input IP3 vs. Input Power Over Frequency Vctrl1 = -2.0V, Vctrl2 = -3V (Worst Case IP3) Input IP3 vs. Input Power Over Temperature @ 10 GHz, Vctrl1 = -2.0V, Vctrl2 = -3V 40 40 35 IP3 (dBm) IP3 (dBm) 35 30 5 GHz 15 GHz 20 GHz 30 GHz 25 0 5 10 30 +25 C +85 C -40 C 25 20 15 SINGLE TONE INPUT POWER (dBm) 5 - 212 -10 -3.0 V -1.2 V 0.0 V -40 RETURN LOSS (dB) ATTENUATORS - ANALOG - SMT 0 20 20 0 5 10 15 SINGLE TONE INPUT POWER (dBm) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 20 HMC712LP3C / 712LP3CE v00.0209 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 26.5 GHz Attenuation vs. Vctrl over Temperature @ 10 GHz, Vctrl1 = Vctrl2 Attenuation vs. Frequency over Vctrl Vctrl1 = Vctrl2 ATTENUATION (dB) ATTENUATION (dB) -10 -20 -30 -3.0 V -1.6 V -1.2 V -0.6 V 0.0 V -40 -50 -10 -20 +25 C +85 C -40 C -30 -40 2 9 16 23 -3 30 -2.5 -2 Attenuation vs. Input Power over Vctrl Vctrl1 = Vctrl2 -1 -0.5 0 Input Return Loss, Vctrl1 = Vctrl2 0 -10 -10 RETURN LOSS (dB) 0 -20 -30 -3.0 V -1.8 V -1.4 V -1.5 CONTROL VOLTAGE (V) FREQUENCY (GHz) -20 -3.0 V -1.2 V 0.0 V -30 -1.0 V -0.4 V 0.0 V -40 ATTENUATORS - ANALOG - SMT 0 0 ATTENUATION (dB) 5 -40 0 5 10 15 2 20 6 10 14 18 22 26 30 FREQUENCY (GHz) INPUT POWER (dBm) Input IP3 vs. Input Power Over Vctrl @ 10 GHz, Vctrl1 = Vctrl2 Output Return Loss, Vctrl1 = Vctrl2 60 0 40 -10 IP3 (dBm) RETURN LOSS (dB) 50 -20 30 20 -3.0 V -1.2 V 0.0 V -3.0 V -2.0 V -1.6 V -1.0 V 0.0 V 10 -30 0 2 6 10 14 18 FREQUENCY (GHz) 22 26 30 0 5 10 15 20 SINGLE TONE INPUT POWER (dBm) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 213 HMC712LP3C / 712LP3CE v00.0209 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 26.5 GHz ATTENUATORS - ANALOG - SMT 5 Absolute Maximum Ratings Control Voltages RF Input Power +30 dBm Vctrl1 -3 to 0V @ 10 A Control Voltage Range +1 to -5V Vctrl2 -3 to 0V @ 10 A Channel Temperature 150 C Continuous Pdiss (T = 85 C) 1W Thermal Resistance (Channel to ground paddle) 66 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY. 3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 6. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.05mm MAX. 7. PACKAGE WARP SHALL NOT EXCEED 0.05mm 8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC712LP3C Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC712LP3CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H712 XXXX [2] H712 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 5 - 214 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC712LP3C / 712LP3CE v00.0209 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 26.5 GHz Pin Number Function Description 1, 2, 4, 9, 11, 12 Ground Paddle GND Ground paddle must be connected to RF/DC ground. 3 RFIN This pin is DC coupled and matched to 50 Ohms. A blocking capacitor is required if RF line potential is not equal to 0V. 5, 8, 13 - 16 N/C These pins should be connected to PCB RF ground to maximize performance. 6 Vctrl1 Control Voltage 1 7 Vctrl2 Control Voltage 2 10 RFOUT This pin is DC coupled and matched to 50 Ohms. A blocking capacitor is required if RF line potential is not equal to 0V. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com ATTENUATORS - ANALOG - SMT 5 Pin Descriptions 5 - 215 HMC712LP3C / 712LP3CE v00.0209 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 26.5 GHz Application Circuit ATTENUATORS - ANALOG - SMT 5 5 - 216 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC712LP3C / 712LP3CE v00.0209 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 26.5 GHz 5 ATTENUATORS - ANALOG - SMT Evaluation PCB List of Materials for Evaluation PCB 123773 [1] Item Description J1, J2 PCB Mount SMA RF Connector C1, C2 100 pF Capacitor, 0402 Pkg. C3, C4 1000 pF Capacitor, 0603 Pkg. C5, C6 4.7 F Capacitor, Tantalum V1, V2 DC Pin U1 HMC712LP3C(E) Voltage Variable Attenuator PCB [2] 123771 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Arlon 25FR or Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 217