Metal Film Resistors, Pulse Withstanding Protective
FP..P
Vishay Dale
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31030
104 Revision: 23-Jul-07
FEATURES
•Special Vishay Dale design provides lightning
withstand characteristics along with resistor
functionality
•A thicker tin oxide power film system provides
lightning surge absorption capabilities
•Higher turns ratio and glass substrate provide
sharper fusing characteristic than the standard
flameproof product line
•Protect against a variety of electrical hazards which can
change or destroy sensitive electronic equipment including
high energy voltage surges caused by power line
anomalies (direct power crosses or inductively coupled
effects) and other momentary overvoltages
•Lead (Pb)-free version is RoHS compliant
Notes:
• Pulse withstanding capabilities are value dependent.
• Value above the cutoff value, shown above, will meet all the surge test requirements shown on next page.
Note:
(1) Some packaging codes are model specific.
* Pb containing terminations are not RoHS compliant, exemptions may apply
Available
Pb-free
RoHS*
COMPLIANT
e3
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
POWER RATING
P70 °C
W
RESISTANCE
RANGE
Ω
STANDARD
TOLERANCE
%
CUTOFF VALUE
FP1/2P FP1/2P 0.5 10R - 1M 1, 2, 5 2K00
FP001P FP1P 1 10R - 1M 1, 2, 5 1K00
FP002P FP2P 2 9R - 1M5 1, 2, 5 300R
FP003P FP3P 3 9R - 1M 1, 2, 5 250R
FP069P FP69P 2 2R6 - 1M 1, 2, 5 400R
MARKING
- DALE
- Value
- Tolerance
- Style and case size
- Date code (year/week)
GLOBAL PART NUMBER INFORMATION
New
G
lobal Part Numbering: FP002P1K00F9256B8 (preferred part numbering format)
FP0 02 P1K0 0F9 25 6B8
Historical Part Number: FP2P 1K00 1% B8 (will continue to be accepted)
FP2P 1K00 1 % B8
HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING
GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE SPEC CODES PACKAGING (1)
(see Standard Electrical
Specifications Table)
R = Decimal
K = Thousand
M = Million
10R0 = 10
Ω
1K30 = 1.3 kΩ
1M00 = 1.0 MΩ
F = ± 1 %
G = ± 2 %
J = ± 5 %
5555 = FP1/2P
6206 = FP001P
9256 = FP002P
9303 = FP003P
7532 = FP069P
EK = Lead (Pb)-free, Bulk
EA = Lead (Pb)-free, T/R
B8 = Tin/Lead, Bulk
CH = Tin/Lead, T/R (750 pieces)
CJ = Tin/Lead, T/R (1000 pieces)
FP..P
Metal Film Resistors, Pulse Withstanding Protective Vishay Dale
Document Number: 31030 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 23-Jul-07 105
DIMENSIONS in inches [millimeters]
A
1.500 ± 0.125
[38.10 ± 3.18]
D
B
GLOBAL
MODEL
DIMENSIONS in inches [millimeters]
AB D
FP1/2P 0.360 ± 0.020 [9.14 ± 0.51] 0.138 + 0.012 - 0.023 [3.51 + 0.31 - 0.58] 0.032 ± 0.002 [0.81 ± 0.05]
FP001P 0.560 ± 0.031 [14.22 ± 0.79] 0.190 + 0.007 - 0.015 [4.83 + 0.18 - 0.38] 0.032 ± 0.002 [0.81 ± 0.05]
FP002P 0.687 ± 0.031 [17.45 ± 0.79] 0.300 ± 0.020 [7.62 ± 0.51] 0.032 ± 0.002 [0.81 ± 0.05]
FP003P 0.900 ± 0.055 [22.86 ± 1.40] 0.300 ± 0.020 [7.62 ± 0.51] 0.032 ± 0.002 [0.81 ± 0.05]
FP069P 0.516 ± 0.021 [13.11 ± 0.53] 0.225 ± 0.012 [5.72 ± 0.31] 0.032 ± 0.002 [0.81 ± 0.05]
120
100
80
60
40
20
0
0 50 100 150 200 250 300
DERATING
FP1/2P
FP001P, FP002P, FP003P
% OF RATED POWER
AMBIENT TEMPERATURE °C
120
100
80
60
40
20
0
0 50 100 150 200 250 300
DERATING
3 W
2 W
FP069P
0.6 W
+ 70 °C
+ 25 °C
AMBIENT TEMPERATURE °C
% OF RATED POWER
FP..P
Vishay Dale Metal Film Resistors, Pulse Withstanding Protective
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31030
106 Revision: 23-Jul-07
LIGHTNING PULSE WAVE FORMS
Lightning pulse wave forms are defined by three numbers:
• Maximum time to reach peak voltage level (typically 10 µs).
• Minimum time for voltage to decrease to half value.
• The peak voltage level.
Three examples are shown below.
10 by 560 to 800 V FCC - Metallic Surge
10 by 1000 to 1000 V REA - Current Surge
10 by 160 to 1500 V FCC - Longitudinal Surge
VOLTS
µs
0
400
800
1200
1600
200 600 1000
VOLTS
VOLTS
µs
0
400
800
1200
1600
200 600 1000
µs
0
400
800
1200
1600
200 600 1000
FP..P
Metal Film Resistors, Pulse Withstanding Protective Vishay Dale
Document Number: 31030 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 23-Jul-07 107
These graphs show the relationship value and pulse withstanding voltage for FP1/2P thru FP003P using a 1.0 % resistance shift
after 10 pulses as the figure of merit. The stable operating region of each package is on the right side of the appropriate line.
FP069P
FP002PFP003P FP001P
FP1/2P
(1500 µ at 2 kΩ)
10 x 160 µs
VOLTS
1750
1500
1250
1000
750
500
250
0100 300
FP003P
FP002P
FP069P
FP001P
FP1/2P
RESISTANCE (Ω)
FP002P FP069P FP001P
FP1/2P
VOLTS
VOLTS
RESISTANCE (Ω)
RESISTANCE (Ω)
500 700 900
100 300 500 700 900
1750
1500
1250
1000
750
500
250
0
10 x 560 µs
10 x 1000 µs
100 300 500 700 900
1750
1500
1250
1000
750
500
250
0
FP003P
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
