12-33
PHOTOCOUPLER
Note:
1.Year date code.
2. 2-digit work week.
3. Factory code shall be marked (Z : Taiwan, Y : Thailand).
4. Model No.:LTV4N35 ; LTV4N37 ; 4N35 ; 4N37
5. All dimensions are in millimeters (inches).
6. Tolerance is 0.25mm (.010 ) unless otherwise noted.
7. Specifications are subject to change without notice.
Package Dimensions
General Purpose Type
Photocoupler
LTV-4N35 Series/LTV-4N37 Series
4N35 Series/4N37 Series
Features
High current transfer ratio
(CTR : MIN.100% at IF=10mA, VCE=10V)
Response time
(ton : TYP, 3 s at VCE=10V, IC=2mA, RL=100 )
Input-output isolation voltage :
LTV-4N35(Viso : 3,550Vrms)
LTV-4N37(Viso : 1,550Vrms)
UL approved (No. E113898)
TUV approved (No.R9653630)
CSA approved (No. CA91533-1)
FIMKO approved (No. 193422)
NEMKO approved (No. P96103013)
DEMKO approved (No. 303985)
SEMKO approved (No. 9646047/01-30)
VDE approved (No. 094722)
Options available :
-Leads with 0.4"(10.16mm)spacing (M Type)
-Leads bends for surface mounting(S Type)
-Tape and Reel of Type I for SMD(Add"-TA"Suffix)
-Tape and Reel of Type II for SMD(Add"-TA1"Suffix)
-VDE 0884 approvals (Add"-V"Suffix)
Applications
1. I/O interfaces for computers.
2. System appliances, measuring instruments.
3. Signal transmission between circuits of different
potentials and impedances.
Ordering Information
Part Number Package Safety Standard Approval Application part
number
LTV-4N35 / 4N35
LTV-4N35M / 4N35M
LTV-4N35S / 4N35S
LTV-4N35S-TA / 4N35S-TA
LTV-4N35S-TA1 / 4N35S-TA1
LTV-4N37 / 4N37
LTV-4N37M / 4N37M
LTV-4N37S / 4N37S
LTV-4N37S-TA / 4N37S-TA
LTV-4N37S-TA1 / 4N37S-TA1
LTV4N35-V / 4N35-V
LTV4N35M-V / 4N35M-V
LTV4N35S-V / 4N35S-V
LTV4N35STA-V / 4N35STA-V
LTV4N35STA1-V / 4N35STA1-V
LTV4N37-V / 4N37-V
LTV4N37M-V / 4N37M-V
LTV4N37S-V / 4N37S-V
LTV4N37STA-V / 4N37STA-V
LTV4N37STA1-V / 4N37STA1-V
6-pin DIP
6-pin (leads with 0.4" spacing)
6-pin (lead bends for surface mount)
6-pin (tape and reel packaging of type I)
6-pin (tape and reel packaging of type II)
6-pin DIP
6-pin (leads with 0.4" spacing)
6-pin (lead bends for surface mount)
6-pin (tape and reel packaging of type I)
6-pin (tape and reel packaging of type II)
6-pin DIP
6-pin (leads with 0.4" spacing)
6-pin (lead bends for surface mount)
6-pin (tape and reel packaging of type I)
6-pin (tape and reel packaging of type II)
6-pin DIP
6-pin (leads with 0.4" spacing)
6-pin (lead bends for surface mount)
6-pin (tape and reel packaging of type I)
6-pin (tape and reel packaging of type II)
UL approved
TUV approved
CSA approved
FIMKO approved
NEMKO approved
SEMKO approved
DEMKO approved
VDE approved
LTV - 4N35
LTV - 4N37
LTV - 4N35
LTV - 4N37
12-34
Absolute Maximum Ratings (Ta=25 )
Parameter Symbol Rating Unit
Input
Output
Total Power Dissipation
*1.Isolation Voltage
Operating Temperature
Storage Temperature
*2.Soldering Temperature
Forward Current
Reverse Voltage
Power Dissipation
Collector-Emitter Voltage
Collector-Base Voltage
Emitter-Collector Voltage
Collector Current
Collector Power Dissipation
4N35
4N37
IF
VR
P
VCEO
VCBO
VECO
IC
PC
Ptot
Viso
Topr
Tstg
Tsol
60
6
100
30
70
7
100
300
350
3,550
1,500
-55~+100
-55~+150
260
mA
V
mW
V
V
V
mA
mW
mW
Vrms
*1. AC for 1 minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1)Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side.
(2)The isolation voltage tester with zero-cross circuit shall be used.
(3)The waveform of applied volttage shall be a sine wave.
*2. For 10 seconds.
Electrical/Optical Characteristics (Ta=25 )
Parameter Symbol Min. Typ. Max. Unit Conditions
InputOutputTransfer Characteristics
Forward Voltage
Reverse Current
Terminal Capacitance
Collector
Dark Current
Collector-Emitter
Breakdown Voltage
Emitter-Collector
Breakdown Voltage
Collector-Base
Breakdown Voltage
Collector
Current
*1 Current
Transfer Ratio
Collector-emitter
Saturation Voltage
Isolation Resistance
Floating Capacitance
Response Time (Turn-on Time)
Response Time (Turn-off Time)
Ta=25
Ta=25
Ta=25
Ta=25
VF
IR
Ct
ICEO
BVCEO
BVECO
BVCBO
IC
CTR
VCE(sat)
RISO
Cf
ton
toff
30
7
70
10
100
51010
1.2
50
11011
1.0
3
3
1.5
10
50
500
0.3
2.5
10
10
V
A
pF
nA
A
V
V
V
mA
%
V
pF
s
s
IF=10mA
VR=4V
V=0, f=1kHz
VCE=10V
VCE=30V
IC=0.1mA
IE=10 A
IC=0.1mA
IF=10mA
VCE=10V
IF=10mA
VCE=10V
IF=50mA, IC=2mA
DC500V, 40~60% R.H.
V=0, f=1MHz
VCE=10V, RBE=
RL=100 , IC=2mA
*1. CTR= 100%
IC
IF
12-35
PHOTOCOUPLER
Typical Electrical/Optical Characteristic Curves
(25 Ambient Temperature Unless Otherwise Noted)
12-36
