J
Series HP02 6mm Tactiles
J12
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
Electrical Capacity (Resistive Load)
Power Level (silver): 3VA maximum @ 28V DC maximum
(Applicable Range 10mA ~ 125mA @ 0.1V ~ 28V)
Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: See Supplement for further explanation of operating range.
Other Ratings
Contact Resistance: 100 milliohms maximum
Insulation Resistance: 100 megohms minimum @ 100V DC
Dielectric Strength: 250V AC minimum for 1 minute minimum between contacts & between contacts & case
Mechanical Life: 500,000 operations minimum
Electrical Life: 500,000 operations minimum
Nominal Operating Force: 1.60N
Total Travel: .008” (0.2mm)
Materials & Finishes
Actuator: Glass fiber reinforced polyamide (UL94V-0)
Case: Stainless steel
Base: Glass fiber reinforced polyamide (UL94V-0)
Movable Contacts: Stainless steel with silver or gold plating
Stationary Contacts: Brass with silver or gold plating
Terminals: Brass with silver or gold plating
Environmental Data
Operating Temperature Range: –20°C through +70°C (–4°F through +158°F)
Humidity: 90 ~ 95% humidity for 240 hours @ 40°C (104°F)
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
Shock: 100G (981m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
PCB Processing
Soldering: Wave Soldering Recommended. See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications
Flammability Standards: UL94V-0 actuator and base
These switches are designed for use in a low-voltage, low-current circuit.
When used as intended, the results do not produce hazardous energy.
General Specifications
J
Series HP02
6mm Tactiles
J13
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
.244” (6.2mm) square body allows compact mounting.
Heat resistant resin body meets lead-free
solder processing requirements and UL
flammability rating of 94V-0.
Stick-tube packaging allows rapid
automated placement of devices.
Gold plated contacts available for very
low voltage/current applications offer
advantages of little or no oxidization or
sulfurization and stable contact resistance.
Crimped terminals provide a spring type action
which ensures secure mounting and prevents dislodging
during automated soldering.
Insert molded terminals lock out flux, solvents, and other contaminants and allow
automated soldering.
Actual Size
Distinctive Characteristics
J
Series HP02 6mm Tactiles
J14
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
Pole & Circuit
15A SPST OFF (ON)
( ) = Momentary
Normally Open Contacts
TYPICAL SWITCH ORDERING EXAMPLE
15A P2HP02
SPST OFF-(ON) Circuit
and Normally Open Contacts
Terminals & Contacts
P2 Straight PC; Silver Contacts
Rated 3VA max. DC
P4
Straight PC; Gold Contacts
Rated 0.4VA max. @
28V AC/DC max.
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
HP0215AFKP2-S
F
Flat Black Button
K
Silver Contacts
with 3VA Rating
Straight PC Terminals
POLE & CIRCUIT
Actuator Position
( ) = Momentary Switch Throw & Schematic
Pole Model
Normal Down
Note: Terminal numbers are
not actually on the switch.
SP HP0215A OFF (ON)
1
2
3
4
SPST
TYPICAL SWITCH DIMENSIONS
Straight PC
HP0215AFKP2
S
Packaging
S
Stick-Tube
100 Pieces/
Tube
Stick-Tube Packaging
Actuator
FFlat Button
Actuator Color
KBlack
(3.5) Dia
.138
(6.2)
.244
(6.2)
.244
(3.5)
.138
(0.5) Max
.020
(6.7)
.264
(4.3)
.169
(0.3) Ty
p
.012
(0.8)
.031
13
24
(0.7) Ty
p
.028
(4.5)
.177
13
24
(6.7)
.264
(1.0) Dia Ty
p
.039
(4.5)
.177
J
Series HP02
6mm Tactiles
J15
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
PACKAGING
KEYBOARD MATRIX
Switches must be ordered in
100-piece increments.
SStick-Tube
Stick-Tube Dimensions
Each stick-tube
contains 100 switches.
(12.5)
.492
(10.5)
.413
(660.0)
25.984
123
65
4
789
B
0
A
9
13
10
6
11
8
12
72
1
3
4
5
1
2
3
4
5
6
7
8
9
0
A
B
1234 5678910111213
= ON
Keys (Switches)
PC Terminations 123
65
4
789
B
0
A
1
2
6
7
34
5
1
2
3
4
5
6
7
8
9
0
A
B
1234 567
PC Terminations
Common Bus Matrix
These single pole, single throw switches can be used in a key-
board matrix and, using strapped terminals, achieve a com-
mon bus electrical configuration on a single-sided PC board.
X-Y Matrix
These single pole, single throw switches can be
arranged on a single-sided PC board matrix
with strapped terminals to achieve an X-Y type
electrical interconnection.
Red = PCB Trace Black = Switch Circuit