To be discontinued in September 2020 DIFFERENTIAL CONNECTOR FCN-260(D) Series microGiGaCNTM RoHS Compliant n FEATURES * I/O Connector designed for high speed differential signal applications. * Matched Impedance (100 ohms 10%) * Low insertion loss * Low cross talk * Adopted by InfiniBand as 10G Ethernet, SAS, & sATA for 4x/12x Interface n SPECIFICATIONS n MATERIALS It em Sp ec i f i c at i o n s Operating temperature range -55C to +85C Current rating AC 0.5A (signal) AC 1A (ground) Max. allowable voltage AC 30 Contact resistance (20m VDC 10mA) 80 m ohms max. (signal) 45 m ohms max.(ground) Insulation resistance 1000M ohms minimu m Dielectric withstanding voltage AC 500V for 1 minute Durability 250 cycle s Insertion force 55.5 N max. (8 pair) 73 N max. (24 pair) Withdrawl force 2.5 N min. (8 pair) 8 N min. (24 pair) Specifications subject to change It em Mat er i al s Insulator LCP Resin (UL94V-0 ) Conductor Copper Allo y Plating Contact: Gold Plating (PAGOS) Terminal: Gold coat over Pd-Ni plating Cover: Zinc Product Specification are subject to change, please check our website (http://us.fujitsu.com/connectors) for the latest specifications. http://us.fujitsu.com/connectors 1 microGiGaCNTM FCN- 260 (D) Series The MicroGigaCN offers a cost-effective I/O solution for high-speed applications in data and telecommunications convergence (voice, data, video and storage). It offers four or twelve link widths, offering a scalable performance range of 500Mbps to 6Gbps per link to meet the needs of entry-level and high-end enterprise systems. Forward crosstalk is less than 4% at 100 pico second pulse-rise time (four-pair switching). Fujitsu Components designed the MicroGiGaCN to specifically address the requirements for a high speed differential signal I/O connector. The MicroGiGaCN offers a unique solution to LVDS, InfiniBand, 10G Ethernet, 3G/6G SAS & SATA, and other high speed I/O applications. InfiniBand, IEEE802.3ak, SAS, & SATA have selected Fujitsu's connector for the 4x and 12x I/O connector interface. The performance requirements of the connector system were tested with cable to simulate the actual requirements of an OEM System manufacturer. Our test data includes the parasitic effects of the PCB, along with measurements of a completed I/O cable assembly. Electrical Performance in out testing: * * * * * Matched Impedance: 10010 ohms @ 100 ps Trise Low Cross Talk: NEXT 4.0% @ 100pc Trise (20 to 80%) Low Insertion Loss: 2.3dB @ 2.5Gbps (1.25GHz, 1 meter Cable Assembly) Skew within Differential Pair: 14.4ps (2 connectors and 2 meter of cable) Skew pair to pair: 21.2ps (2 connectors and 2 meter of cable) Connection Diecast cover Shield cover I/O plate Ferrule Cable shield Plug Cable shield (Cable plug) (Screw) Diecast cover (Cable plug) (Demple, pitch 3mm) Shield cover (Socket) (Gasket spring) IO plate Socket Specifications subject to change http://us.fujitsu.com/connectors 2 microGiGaCNTM FCN- 260 (D) Series Basic Concept for Differential Transfer BasicConceptforDifferential Transfer SectionalView (Connection area) 1.5 mm 0.75 mm Virtual ground plane + + Patent pending + Outer shield 1.27 mm Differential pair contact - - Ground/Powercontact Product Specification are subject to change, please check our website (http://us.fujitsu.com/connectors) for the latest specifications. Fujitsu Components has designed the mechanical features of the connector to provide space saving footprint that will allow for 3 4x I/O connectors to mount onto a PCI form, or 2 12x. As RFI/EMI are critical elements in high performance cable assemblies, Fujitsu Components provides the surface mount sockets with an EMI Ground Spring on the face of the connector, to insure that the metal surface of the connector makes sufficient contact with the metal face of the card bracket. The latching mechanism of the backshell offers a lanyard system for ease of un-mating the I/O plug connector/cable assembly from the SMT I/O socket. The die cast backshell offers excellent RFI/ EMI characteristics. The backshell uses a ferrule and Specifications subject to change unique ground spring system to provide 360 degree contact of the cable shield to the backshell, which, combined with the solid interconnect of the socket to faceplate, offers low AC coupling termination. The current version of the I/O plug comes with an attached paddlecard for wire termination. Fujitsu offers the paddlecard in either an equalized or un-equalized version (see factory for details of the equalized version). Standard product offering will be un-equalized. As there are multiple applications for the paddlecard, with industry and customer specific wire termination, Fujitsu Components offers options to customers of providing the I/O plug connector with custom paddlecards (consult factory). http://us.fujitsu.com/connectors 3 microGiGaCNTM FCN- 260 (D) Series CABLE I/O JACK SCREW LOCK TYPE - WITH ALIGNMENT PIN / WITH CRUSH PIN nDIMENSIONS Insula tor Signal con tact ( J1) J2 9.6 J3 6.75 7.39 Y S(mx2-1) Signal con tact Section X-X 1.3 Ground con tact 6.1 S(2) (Center of dimension value 1.3mm) G(1) Sheild c over He xagon sc rew 1.5 0.3 Signal terminal height O 4 +0.10 -0.15 X Detail S(1) 1.5 Ground con tactX Y Ground con tact X 1.2 1.3 6.1 (Center of dimension value 1.3mm) 2-M2.5 9.2 1.5 Section X-X 10.075 X Solder po st O 4 12 Y 5.8 Max Gas ket X Detail S(1) S(2) G(1) 7.6 12 S(mx2-1) Front su rface of shield c over to top of he xagon sc rew 2-M2.5 X +0.3 0 7.39 0.3 Signal terminal height S(2) G(1) X 9.6 6.75 Y 1.2 Signal con tact Solder po st 10.075 J2 J3 S(mx2) Insula tor Gas ket +0.10 -0.15 X G(n) 5.8 Max ( J1) 7.6 S(mx2) G(n) +0.3 0 Front su rface of shield c over to top of he xagon sc rew 9.2 Signal con tact 1.5 Ground con tact X Scale 5/1 0.3 S(2) G(1) Detail Section Y-Y G(1) G(n) S(1) S(2) 6.7 S(mx2-1) 0.3 S(1) S(mx2) Detail X Scale 5/1 Section Y-Y FCN-268D0**-G/1* WITH ALIGNMENT PIN G(1) G(n) n RECOMMENDED PCP LAYOUT S(1) S(mx2) Unit: mm Ground terminal height 6.7 He xagon sc rew Ground terminal height S(1) Sheild c over S(2) S(mx2-1) 2-O 1.8 FCN-268D0**-G/1* WITH ALIGNMENT PIN 0.15 0.15 Detail Detail BB 7.65 Detail Detail AA 7.65 4.750.05 0.3050.025 0.305 0.025 99 0.3050.025 0.305 0.025 +0.05 G(1) G(1) {(p-1)x0.5+1.250.05} Detail C C Detail OO 1.82 1.82 +0.05 00 2-O 1.8 Detail B Detail 1.82 1.82+0.05 00 +0.05 m: Number of signal pin {(p-1)x0.5+1.250.05} DetailDD Detail n : Number of ground pin p : Number of terminals (total number of signal+, signal-, ground terminals) Detail C C Detail P.T.H: Plated Through hole. Dimensions after soldering shall meet spefified size. Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole. * m: see Number of signal sheet pin about component mounting prohibited area. * Please speficication * n : Number of ground pin * p : Number of terminals (total number of signal+, signal-, ground terminals) * P.T.H: Plated Through hole. Dimensions after soldering shall meet spefified size. Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole. * Please see speficication sheet about component mounting prohibited area. Specifications subject to change 4-0.15 4-0.15 S(2) S(2) S(1) S(1) OO 1.82 1.82 +0.05 00 1.88 1.88 +0.05 00 1.82 1.82+0.05 00 DetailDD Detail 4-0.15 4-0.15 FCN-268D0**-G/2* WITH CRUSH PIN 1.88 1.88 +0.05 2.6 +0.05 2.6 00 0.3050.025 0.305 0.025 99 6.7 -0.05 6.7 00 3.90.05 3.9 0.05 5.9 0.05 5.90.05 4.6 4.6 -0.05 -0.05 2.60.05 2.6 0.05 00 5.9 0.05 5.90.05 * * * * S(2) S(2) S(1) S(1) 2.60.05 2.6 0.05 6.7 -0.05 6.7 S(mx2) S(mx2-1) Detail Detail C C 00 Edge of P.C.B Detail Detail BB G(1) G(1) 7.65 7.65 4.750.05 3.90.05 3.9 0.05 2-O 2.2 0.05 Edge of P.C.B (P.T.H) (P.T.H) S(mx2) DetailDD Detail S(mx2-1) J8 J8 J7 0.05 J6 0.05 4.6 4.6 -0.05 -0.05 G(n) DetailDG(n) D Detail FCN-268D0**-G/2* WITH CRUSH PIN 0.3050.025 0.305 0.025 Detail Detail C C 2-O 2.2 0.05 (P.T.H) (P.T.H) 2.6 2.6 +0.05 00 J8 J8 J7 0.05 J6 0.05 +0.05 4.75 4.75 2.6 2.6 +0.05 00 G(n) G(n) 0.5 0.5 0.15 0.15 J6 J6 J7 J7 4.1 4.1 1.25 1.25 1.075 1.075 Detail Detail AA Detail DetailAA Detail Detail BB 2-O 1.8 0.15 0.15 4.75 4.75 +0.05 2.6 +0.05 2.6 00 J7 J7 1.075 1.075 0.5 0.5 0.15 0.15 J6 J6 4.1 4.1 1.25 1.25 Detail AA Detail Detail Detail BB 2-O 1.8 Detail B Detail Unit: mm Unit: mm http://us.fujitsu.com/connectors 4 microGiGaCNTM FCN- 260 (D) Series CABLE I/O JACK SCREW LOCK TYPE - WITH DIAMOND PIN n DIMENSIONS / RECOMMENDED PCP LAYOUT O 1.8 Alignment pin Detail G Detail H J9 4.75 1.8 1.5 1.25 J10 0.15 0.15 0.5 Detail G 7.39 Detail H +0.3 0 Front su rface of shield c over to top of h exagon sc rew 5.8 Max X O 4 7.6 +0.10 -0.15 10.075 Solder po st 1.3 6.1 (Center of dimension value 1.3mm) 9.2 G(n) 2-O 2.2 0.05 (P.T.H.) J110.05 J100.05 J90.05 7.65 4.75 0.05 Detail J 0.305 0.025 0.305 0.025 G(1) +0.05 0 9 2.6 S(mx2-1) 2.6 +0.05 0 S(mx2) 5.9 0.05 0 6.7 -0.05 Edge of P.C.B 3.9 0.05 0 4.6 -0.05 S(2) S(1) 2- O1.82 +0.05 0 {(p-1)x0.5+ 1.25 0.05 Detail J * * * * m: Number of signal pin n : Number of ground pin p : Number of terminals (total number of signal+, signal-, ground terminals) P.T.H: Plated Through hole. Dimensions after soldering shall meet spefified size. Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole. * Please see speficication sheet about component mounting prohibited area. Specifications subject to change http://us.fujitsu.com/connectors 5 microGiGaCNTM FCN- 260 (D) Series CABLE I/O JACK SCREW LOCK TYPE FCN-268D0**-G/ * * PANEL CUTOUT (REFERENCE) nDIMENSIONS (1) J130.1 J140.1 J150.1 . ax 3m . R0 10 2-O3.2 +0.05 0 4.975 10.30.1 10 2.4 max. Panel P.C.B 1.85 ( 3.9) ( 5.9) Unit: mm n PART NUMBERS Dimensions (mm) Part Number J13 J14 J15 FCN-264D008-G/** 27 24 19.7 FCN-264D024-G/** 51 48 43.7 Specifications subject to change http://us.fujitsu.com/connectors 6 microGiGaCNTM FCN- 260 (D) Series CABLE I/O JACK SCREW LOCK TYPE - WITH ALIGNMENT PIN / WITH CRUSH PIN n PART NUMBERS FCN-268D**-G/1 with alignment pin Part Number Pair FCN-268D008-G/10 FCN-268D008-G/11 8 FCN-268D008-G/13 FCN-268D024-G/10 FCN-268D024-G/11 24 FCN-268D024-G/13 PCB thickness (mm) Dimensions (mm) X J1 J2 J3 J6 J7 J8 1.6 2.325 29.8 20.15 17.25 14.5 19.25 22.15 2.4 3.125 29.8 20.15 17.25 14.5 19.25 22.15 4.0 4.725 29.8 20.15 17.25 14.5 19.25 22.15 1.6 2.325 53.8 44.15 41.25 38.5 43.25 46.15 2.4 3.125 53.8 44.15 41.25 38.5 43.25 46.15 4.0 4.725 53.8 44.15 41.25 38.5 43.25 46.15 n PART NUMBERS FCN-268D**-G/2 with crush pin Part Number Pair FCN-268D008-G/20 FCN-268D008-G/21 Dimensions (mm) X J1 J2 J3 J6 J7 J8 1.6 2.325 29.8 20.15 17.25 14.5 19.25 22.15 2.4 3.125 29.8 20.15 17.25 14.5 19.25 22.15 FCN-268D008-G/23 4.0 4.725 29.8 20.15 17.25 14.5 19.25 22.15 FCN-268D024-G/20 1.6 2.325 53.8 44.15 41.25 38.5 43.25 46.15 2.4 3.125 53.8 44.15 41.25 38.5 43.25 46.15 4.0 4.725 53.8 44.15 41.25 38.5 43.25 46.15 FCN-268D024-G/21 8 PCB thickness (mm) 24 FCN-268D024-G/23 n PART NUMBERS FCN-268D**-G/3 with diamond pin PCB thickness (mm) X J9 J10 J11 1.6 2.325 14.5 19.25 22.15 2.4 3.125 14.5 19.25 22.15 FCN-268D008-G/33 4.0 4.725 14.5 19.25 22.15 FCN-268D024-G/30 1.6 2.325 38.5 43.25 46.15 2.4 3.125 38.5 43.25 46.15 4.0 4.725 38.5 43.25 46.15 Part Number Pair FCN-268D008-G/30 FCN-268D008-G/31 FCN-268D024-G/31 8 24 FCN-268D024-G/33 Specifications subject to change Dimensions (mm) http://us.fujitsu.com/connectors 7 microGiGaCNTM FCN- 260 (D) Series Signal contact FCN-264D - VERTICAL MOUNT SOCKETS, LATCH STYLE Ground contact n DIMENSIONS Signal contact 7.175 G[1] Section X-X 7.175 S[2] 3 X Detail V 1.2 Section 1.2 Section 1.3 6.7 6.4 6.7 6.4 X Y Detail W Detail 2-O W 1.8 0.5 TYP Terminal Pit1.25 ch 2-O 1.8 0.5 TYP Terminal Pitch B C Detail V 4.7 S[1] 4.7 2-O 1.8 1.25 B 3.2 3.2 C 0.3 Z-Z Z-Z 0.3 (Solder post) Detail V (SignalGround Terminal) (Solder post) 0.15 Signal Terminal 0.15 Signal Terminal 0.15 Ground Terminal 0.15 Ground Terminal Detail W (Contact Terminal) FCN-264D0**-G/2** WITH CRUSH PIN Detail V FCN-264D0**-G/2** (SignalGround Terminal) Detail W WITH CRUSH PIN 2- 1.88 Signal Contact Pit ch TYP 1.5 1.5 TYP S[1] Z 1.5 TYP S[2m-1] Y Z FCN-264D0**-G/1** WITH ALIGNMENT PIN 1 12 1.5 TYP Ground Contact Pitch Signal Contact Pitch 0.025 Z S[2m-1] Ground Contact Pitch Z X 1 G[1] 1 12 G[n] 1.3 S[2m] Section Y-Y 2-O 1.8 4-R 0.15 X A 0.025 4-R 0.15 Y FCN-264D0**-G/1** WITH ALIGNMENT P X 1 13 S[2] 3 Section Y-Y 3.9 10.3 X G[n] 13 A S[2m] Section X-X 3.9 10.3 Y Ground contact Unit: mm (Contact Terminal) n RECOMMENDED PCB LAYOUT (TOP VIEW) B0.05 2-O2.20.05 (P.T.H) S[2] S[1] S[2m] {0.5x(p-1)}0.0 C0.05 * 3.20.05 Connector S[2] S[1] m: Numbermounting of signalarea pin n : Number of ground pin S[2m] 1.25terminals) p : Number of terminals (total number of signal+, signal-, ground P.T.H: Plated Through hole. Dimensions after soldering shall meet specified size S[2m-1] {0.5x(p-1)}0.0 Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole 3.20.05 Please see speficication sheet about C0.05 component mounting prohibited area 3.90.1 * * * * 0.3050.025 1.25 S[2m-1] G[1] 14+0.1 0 0.3050.025 14+0.1 0 G[n] 0.50.025 O 1.82+0.05 0 0 8.8 -0.1 0 1-0.1 Connector mounting area G[1] 2.60.05 0 8.8 -0.1 0 1-0.1 2-O2.20.05 (P.T.H) B0.05 3.90.1 G[n] 0.50.025 O 1.82+0.05 0 1.82+0.05 0 1.82+0.05 0 2.60.05 * * * * Unit: mm m: Number of signal pin n : Number of ground pin p : Number of terminals (total number of signal+, signal-, ground terminals) P.T.H: Plated Through hole. Dimensions after soldering shall meet specified size Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole * Please see speficication sheet about component mounting prohibited area Specifications subject to change http://us.fujitsu.com/connectors 8 microGiGaCNTM FCN- 260 (D) Series FCN-264D - VERTICAL MOUNT SOCKETS, LATCH STYLE n PART NUMBERS FCN-264D**-G/1 with alignment pin Part Number Pair FCN-264D008-G/1D FCN-264D008-G/1F 8 FCN-264D008-G/1K FCN-264D024-G/1D FCN-264D024-G/1F 24 FCN-264D024-G/1K PCB thickness (mm) Dimensions (mm) X A B C 1.6 2.325 17.675 14.5 17.7 2.4 3.125 17.675 14.5 17.7 4.0 4.725 17.675 14.5 17.7 1.6 2.325 41.675 38.5 41.7 2.4 3.125 41.675 38.5 41.7 4.0 4.725 41.675 38.5 41.7 n PART NUMBERS FCN-264D**-G/2 with crush pin Part Number Pair FCN-264D008-G/2D FCN-264D008-G/2F Dimensions (mm) X A B C 1.6 2.325 17.675 14.5 17.7 2.4 3.125 17.675 14.5 17.7 FCN-264D008-G/2K 4.0 4.725 17.675 14.5 17.7 FCN-264D024-G/2D 1.6 2.325 41.675 38.5 41.7 2.4 3.125 41.675 38.5 41.7 4.0 4.725 41.675 38.5 41.7 FCN-264D024-G/2F 8 PCB thickness (mm) 24 FCN-264D024-G/2K n RECOMMENDED FOOTPRINT DIMENSIONS Length of Solder Post Recommended panel thickness = 10.1 K0.2 Board Surface to I/O Panel Su rface 4.7 P.C.B. X Thickness of Lock Plate J0.1 H0.1 (F0.1 ) Thickness of I/O Panel G 10.30.1 7.20.1 I/O Panel Unit: mm n PART NUMBERS Dimensions (mm) Part Number P (Lock plate thickness) K Retention Clip Part Number J K N (Panel thickness) FCN-264D008-G/** 19.7 22.7 1.0 0.5 6.35 FCN-260A622 FCN-264D024-G/** 43.2 46.7 1.0 0.5 6.34 FCN-260A626 Specifications subject to change http://us.fujitsu.com/connectors 9 microGiGaCNTM FCN- 260 (D) Series 4X / 12X RIGHT ANGLE MOUNT SOCKETS WITH LATCHES nDIMENSIONS Detail D FCN-268D0**-G/1** WITH ALIGNMENT PIN 1.075 O 1.8 (2X) 1.25 X 4.1 ( 6.1 ) 0.15 0.01 E F A 0.05 A 3.2 7.175 Detail D (B) E G ( Keep-out area ) F 0.05 (M) E 0.05 G[n] S 5.175 ( Keep-out area ) 3.2 0.05 (1.575) 0.305 0.025 0.05 A S Detail G 2- O 2.2 0.05 (P.T.H.) 0.305 0.025 0.05 A S G[1] Detail E FCN-268D0**-G/2** WITH CRUSH PIN S[2] 2.6 0.05 O 1.8 (2X) S[1] S[2m] S[2m-1] 5.9 0.05 0 6.7 -0.05 3.9 0.05 0 4.6 -0.05 Edge of P.C.B. 1.82 +0.05 0 9.7 Detail F O1.82 +0.05 0 Detail F 1.88 0.05 (2X) Detail 0.5 TYP 0.150.01 0.05 A S 1.25 0.5 TYP A Detail G A 0.15 (4X) * * * * m: Number of signal pin n : Number of ground pin p : Number of terminals (total number of signal+, signal-, ground terminals) P.T.H: Plated Through hole. Dimensions after soldering shall meet specified size. Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole. * Please see speficication sheet about component mounting prohibited area. Detail E Unit: mm n RECOMMENDED PANEL LAYOUT (N ) Panel P K0.1 J0.1 .3 M AX X) (4.75) . Panel cutout center line 4.975 7.20.1 10.30.1 R0 (8 (6.75) Recommended panel thickness = 10.1 P.C.B. (3.9) (5.9) 1.850.1 n PART NUMBERS Dimensions (mm) Part Number J 19.7 FCN-268D008-G/** Part Number J FCN-268D024-G/** N P (Lock plate thickness) (Panel thickness) Dimensions (mm) 1.0 22.7 0.5 K 43.7 K N 1.0 46.7 (Panel thickness) Unit: mm Retention Crip Part Number FCN-260A622 P FCN-260A626 (Lock0.5plate thickness) Retention Clip Part Number FCN-268D008-G/** 19.7 22.7 1.0 0.5 FCN-260A622 FCN-268D024-G/** 43.2 46.7 1.0 0.5 FCN-260A626 Specifications subject to change http://us.fujitsu.com/connectors 10 microGiGaCNTM FCN- 260 (D) Series 4X / 12X RIGHT ANGLE MOUNT SOCKETS WITH LATCHES WITH ALIGNMENT POST OR CRUSH PIN OPTION n PART NUMBERS FCN-268D**-G/1 with alignment pin PCB thickness (mm) X A B E F G M 1.6 2.325 17.675 24.85 14.5 17.7 19.675 16.075 2.4 3.125 17.675 24.85 14.5 17.7 19.675 16.075 FCN-268D008-G/1K 4.0 4.725 17.675 24.85 14.5 17.7 19.675 16.075 FCN-268D024-G/1D 1.6 2.325 41.675 48.85 38.5 41.7 43.675 40.075 2.4 3.125 41.675 48.85 38.5 41.7 43.675 40.075 4.0 4.725 41.675 48.85 38.5 41.7 43.675 40.075 Part Number Pair FCN-268D008-G/1D FCN-268D008-G/1F 8 FCN-268D024-G/1F 24 FCN-268D024-G/1K Dimensions (mm) n PART NUMBERS FCN-268D**-G/2 with crush pin Part Number Pair PCB thickness (mm) X A B E F G M 1.6 2.325 17.675 24.85 14.5 17.7 19.675 16.075 2.4 3.125 17.675 24.85 14.5 17.7 19.675 16.075 4.0 4.725 17.675 24.85 14.5 17.7 19.675 16.075 1.6 2.325 41.675 48.85 38.5 41.7 43.675 40.075 2.4 3.125 41.675 48.85 38.5 41.7 43.675 40.075 4.0 4.725 41.675 48.85 38.5 41.7 43.675 40.075 FCN-268D008-G/2D FCN-268D008-G/2F 8 FCN-268D008-G/2K FCN-268D024-G/2D FCN-268D024-G/2F 24 FCN-268D024-G/2K Dimensions (mm) Retention Clip Hand Tool Retention Clip Y 11.2 X Unit: mm FCN-268T-T514/H Each connector is shipped with 1 piece of FCN-260A622 (8-pair) or FCN-260A626 (24-pair) retention clip. To order connector and retention clip separately, please contact sales for part number. For Assembly instructions, please see the Lock Plate Hand Tool Instruction Manual n PART NUMBERS Part Number Pair Dimensions (mm) X Y Panel thickness (mm) FCN-260A622 8 23.45 0.5 1.0 FCN-260A626 24 47.45 0.5 1.0 Specifications subject to change http://us.fujitsu.com/connectors 11 microGiGaCNTM FCN- 260 (D) Series 4X / 12X RIGHT ANGLE MOUNT CONNECTOR SOCKET WITH LATCHES WITH MOUNTING EARS nDIMENSIONS 2-M 2.5 S1 6.15 X Y O 1.8 A Detail F G(n) 0.3 E S(2xm) 10.075 Section X-X Z G1 0.15 0.01 S2 0.05 AS1 B C 1.3 0.05 1.5 S Detail C Section Z-Z (Board pin) 1.5 S A S(mx2-1) C Detail A 0.33 3.2 Spring 10.525 4.6 0 -0.05 S(mx2-1) * * * * 0.305 0.025 0.05 A 0.1 A +0.05 0 G1 S2 A S1 2.6 A 0.305 0.025 0.05 A 0.5 TYP 1.25 Detail D A Edgepin of P.C.B. m: Number of signal A 0.5 TYP n : Number of ground pin S(mx2) 1.25 p : Number of terminals (total number of signal+, signal-, ground terminals) S(mx2-1) P.T.H: Plated Through hole. Dimensions after soldering shall meet spefified size. Connector pins shall be fixed by solder or equivalent method after inserting connector pins to platedDetail through hole. D * Please see speficication sheet about component mounting prohibited area. * m: Number of signal pin * n : Number of ground pin * p : Number of terminals (total number of signal+, signal-, ground terminals) * P.T.H: Plated Through hole. Dimensions after soldering shall meet spefified size. Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole. * Please see speficication sheet about component mounting prohibited area. Specifications subject to change L (5.55) D 2.6 Detail 2- O 1.82 +0.05 0 Section S-S L +0.05 0 1.575 2.6 3.90.05 5.90.05 0 6.7 -0.05 9.7 F 0.3 0.305 0.025 0.05 A Detail B G1 S2 S1 +0.05 0 3.2 K 4.6 S(mx2) 0.1 A E Connector mounting area Edge of P.C.B. 0.305 0.025 0.05 A 2.6 J 2- O 1.82 +0.05 0 +0.05 0 1.575 10.525 0 -0.05 2-O2.2 0.05 0.12 A (P.T.H.) F 2.6 3.90.05 5.90.05 0 6.7 -0.05 9.7 2-O2.2 0.05 0.12 A (P.T.H.) Connector mounting G(n) area Unit: mm 2.6 Detail A n RECOMMENDED PCB LAYOUT (TOP VIEW) 3.2 Detail D K 0.3 Section S-S 60 S E G(n) A 0.33 Detail B J Detail C S +0.10 -0.15 S(2xm) Detail F E 1.8 G(n) 0.15 0.01 0.05 A G1 0.5 TYP 0.15 0.01 Terminal pitch 0.05 A 1.25 0.15 0.01 A 0.05 A 0.5 TYP Terminal pitch 1.25 +0.10 -0.15 Spring A S2 Section Y-Y S1 1.3 0.05 0 -0.05 0 O 1.8 -0.05 A Section Y-Y Section Z-Z (Board pin) 3.2 S(mx2-1) Detail Z 4.1 6.1 9.2 B Detail Detail Detail Z S1 1.5 TYP Signal Contact 1.5 TYP Ground Contact 6.15 0.30.1 6.4 6.4 0.1 G(n) S(mx2-1) Z 4.1 6.1 9.2 Section X-X (5.55) X 12 7.2 1.5 TYP Signal Contact 1.5 TYP Ground Contact S2 G1 Ground contact 60 Y 3 Ground contact Insulator 10.075 X G(n) S(mx2-1) Y Gasket Differential Signal Contacts 0.3 0.05 S(mx2) 12.525 2-M 2.5 9.675 6.92 0.3 0.05 12 7.2 C B A 1.075 X S2 G1 1.075 X 3 XD Insulator 1.2 0.05 0.12 A Y Gasket Differential Signal Contacts 1.8 S(mx2) 12.525 9.675 6.92 1.2 0.05 0.12 A D C B A Unit: mm Unit: mm http://us.fujitsu.com/connectors 12 microGiGaCNTM FCN- 260 (D) Series 4X / 12X RIGHT ANGLE MOUNT CONNECTOR SOCKET WITH LATCHES, WITH MOUNTING EARS n PART NUMBERS Part Number Pair PCB thickness (mm) X A B 1.6 2.4 24.34 17.42 20.175 23.025 FCN-268D008-G/3L-R FCN-268D008-G/3M-R C D E F J K L 17.7 14.5 25.025 16.075 16.65 2.4 3.2 24.34 17.42 20.175 23.025 17.7 14.5 25.025 16.075 16.65 FCN-268D008-G/3P-R 4.0 4.8 24.34 17.42 20.175 23.025 17.7 14.5 25.025 16.075 16.65 FCN-268D024-G/3L-R 1.6 2.4 48.34 41.42 44.175 47.025 41.7 38.5 49.025 38.075 40.65 2.4 3.2 48.34 41.42 44.175 47.025 41.7 38.5 49.025 38.075 40.65 4.0 4.8 48.34 41.42 44.175 47.025 41.7 38.5 49.025 38.075 40.65 FCN-268D024-G/3M-R 8 Dimensions (mm) 24 FCN-268D024-G/3P-R n RECOMMENDED FOOTPRINT DIMENSIONS ( 1) G0.1 H0.1 I0.1 .3 R0 X. MA 4.975 10.3 0.1 7.2 0.1 Panel 2- O 3 (3.9) (5.9) 1.85 P.C.B. Unit: mm n PART NUMBERS Part Number Dimensions (mm) G H I FCN-268D008-G/3*-R 29.85 22.7 19.7 FCN-268D024-G/3*-R 53.85 46.7 43.7 Specifications subject to change http://us.fujitsu.com/connectors 13 microGiGaCNTM FCN- 260 (D) Series 4X / 12X PLUG CONNECTOR WITH INFINIBAND STYLE PCB n REFERENCE S(2m) G(n) S2 (A) 7.9 3.2 G1 S(2m-1) {1.5 {1.5x(m-1)} x(m-1)} Signal Signalcontact contact {1.5 x(n-1)-0.75} {1.5x(n-1)0.75 } Ground contact Ground contact S1 S8 S7 S7 S4 S4 S3 S3 (D) S(2m-1) S(2m-1) S(2m) S(2m) ( 9.55) 18.1 Solder pad ( 7.05 ) B C 0.45 0.6 1.1 3.04 (E) Slot for guard for miss insertion to cover S2 S1 S6 S5 S(2m-3) S(2m-2) Unit: mm * m : Number of signal pin * n : Number of ground pin n PART NUMBERS Part Number Pair Dimensions (mm) A B C D E FCN-261R008-G/5L 8 17.7 10.5 12.0 17.4 14.95 FCN-261R024-G/5L 24 41.7 34.5 36.0 41.4 38.95 Specifications subject to change http://us.fujitsu.com/connectors 14 microGiGaCNTM FCN- 260 (D) Series 4X / 12X PLUG CONNECTOR WITH INFINIBAND STYLE PCB (CABLE MOUNT) n PART NUMBERS Non-Equalized Plug Kits RoHS 6/6 Data Speeds Status FCN-261R008-G/0L 4x up to 3.2Gbps To be Discontinued: September 2019 FCN-261R008-G/5L 4x up to 5Gbps FCN-261R024-G/0L 12x up to 3.2Gbps FCN-261R024-G/5L 12x up to 5Gbps Active To be Discontinued: September 2019 Active Equalized Plug Kits 4x Plug Kits - Equalized RoHS 6/6 (lead free solder) Data Speeds Equalized Pair Status FCN-261R008-G/6L#08 IB DDR 8 meter, 24AWG 1-4 Discontinued: March 2018 FCN-261R008-G/6L#10 IB DDR 10 meter, 24AWG 1-4 Discontinued: March 2018 FCN-261R008-G/6L#12 IB DDR 12 meter, 24AWG 1-4 Discontinued: March 2018 FCN-261R008-G/6M#08 IB DDR 8 meter, 26AWG 1-4 Discontinued: March 2018 FCN-261R008-G/6M#10 IB DDR 10 meter, 26AWG 1-4 Discontinued: March 2018 FCN-261R008-G/6M#12 IB DDR 12 meter, 26AWG 1-4 Discontinued: March 2018 12x Plug Kits - Equalized RoHS 6/6 (lead free solder) Data Speeds Equalized Pair Status FCN-261R024-G/6L#08 12x IB DDR 8 meter, 24AWG 1-12 Discontinued: March 2018 FCN-261R024-G/6L#10 12x IB DDR 10 meter, 24AWG 1-12 Discontinued: March 2018 FCN-261R024-G/6L#12 12x IB DDR 12 meter, 24AWG 1-12 Discontinued: March 2018 FCN-261R024-G/6M#08 12x IB DDR 8 meter, 26AWG 1-12 Active FCN-261R024-G/6M#10 12x IB DDR 10 meter, 26AWG 1-12 Active FCN-261R024-G/6M#12 12x IB DDR 12 meter, 26AWG 1-12 Discontinued: March 2018 IB SDR = InfiniBand Single Data rate - 2.5Gbps IB DDR = InfiniBand Double Data rate - 5Gbps Equalized circuits are optimized for cable length / wire AWG Specifications subject to change http://us.fujitsu.com/connectors 15 microGiGaCNTM FCN- 260 (D) Series 4X / 12X PLUG CONNECTOR WITHOUT PCB RECOMMENDED PADDLE CARD OUTLINE n DIMENSIONS 3.450.1 (0.1360.004) 20.1 (0.0790.004) J0.1(37.95)[1.494] 5.50.1 Pad center (0.2170.004) 5.250.1 (0.5070.004) 30.1(0.1200.004) 3.2(0.126) 1.60.1 (0.0630.004) 1.70.1 (0.0670.039) {1.5x(m-1)}[0.059] 14.60.1 (0.5750.039) 10.1 (0.6690.039) 170.1 (0.6690.004) H0.1(36.5)[1.437] G0.1(38.2)[1.504] G0.5(36)[1.417] 1.50.05 (0.0590.002) 0.750.05(0.0300.002) 0.450.05 (0.0180.002) E0.5(34.5)[1.358] 1.50.05 (0.0590.002) 0.450.05(0.0180.002) {1.5x(n-1)-0.75}[0.059(n-1)-0.030] B(34.5)[1.358] C(36)[1.417) Unit: mm (in.) n PART NUMBERS Part Number Pai r m n FCN-261R008-G/A 8 1-8 1- 9 FCN-261R024-G/A 12 Specifications subject to change B C 10.5 (0.413 ) 12.0 (0.472 ) 1-2 4 1-2 5 34.5 (1.358 ) 36.0 (1.417 ) http://us.fujitsu.com/connectors 16 microGiGaCNTM FCN- 260 (D) Series 4X I/O CABLE ASSEMBLY (LATCH/THUMB SCREW) CONFORMS TO IBTA DDR / 100GBASE-CX4 n PART NUMBERS Conforming Standard IB DDR (5Gbps) Type Cable Cable length Part Number 1m 26AWG Latch 28AWG 30AWG 26AWG Thumb screw Conforming Standard 10GBASE-CX4 (3.215 Gbps) 28AWG 30AWG Cable length Part Number FCD-ZZ26001 1m FCD-ZZ22001 2m FCD-ZZ26002 2m FCD-ZZ22002 3m FCD-ZZ26003 3m FCD-ZZ22003 5m FCD-ZZ26004 5m FCD-ZZ22004 1m FCD-ZZ26011 7m FCD-ZZ22005 2m FCD-ZZ26012 10m FCD-ZZ22006 3m FCD-ZZ26013 1m FCD-ZZ22011 1m FCD-ZZ26021 2m FCD-ZZ22012 2m FCD-ZZ26022 3m FCD-ZZ22013 3m FCD-ZZ26023 5m FCD-ZZ22014 1m FCD-ZZ27001 7m FCD-ZZ22015 2m FCD-ZZ27002 10m FCD-ZZ22016 3m FCD-ZZ27003 1m FCD-ZZ22021 5m FCD-ZZ27004 2m FCD-ZZ22022 1m FCD-ZZ27011 3m FCD-ZZ22023 2m FCD-ZZ27012 5m FCD-ZZ22024 3m FCD-ZZ27013 1m FCD-ZZ23001 1m FCD-ZZ27021 2m FCD-ZZ23002 2m FCD-ZZ27022 3m FCD-ZZ23003 3m FCD-ZZ27023 5m FCD-ZZ23004 7m FCD-ZZ23005 10m FCD-ZZ23006 1m FCD-ZZ23011 2m FCD-ZZ23012 3m FCD-ZZ23013 5m FCD-ZZ23014 7m FCD-ZZ23015 10m FCD-ZZ23016 1m FCD-ZZ23021 2m FCD-ZZ23022 3m FCD-ZZ23023 5m FCD-ZZ23024 Type Cable 26AWG Latch 28AWG 30AWG 26AWG Thumb Screw 28AWG 30AWG Specifications subject to change http://us.fujitsu.com/connectors 17 microGiGaCNTM FCN- 260 (D) Series 4X I/O CABLE ASSEMBLY (LATCH/THUMB SCREW) CONFORMS TO IBTA DDR / 100GBASE-CX4 15020 Inspector No. (71.9) 49 24.9 Connector 2 S2 S1 S15 G9 S16 G1 14.4 n DIMENSIONS LATCH TYPE 4X) Label 2 Label 1 (Cable assembly part number) S15 G9 S16 S2 S1 G1 microGiGaCN TM I/O 50.8 5 Label 1 19.15 Connector 1 Specifications subject to change Fujitsu ComponentLimited (Lot.No. ) 150 20 50.8 5 Label 2 19.15 Unit: mm http://us.fujitsu.com/connectors 18 microGiGaCNTM FCN- 260 (D) Series 4X / 12X BACKSHELL KITS, WITH LATCHES CABLE I/O PLUG COVER n DIMENSIONS 49 22.9 D 10.3 C B E (A) 7.2 OF Projection of die casting cover Screw M2.5 Polarization Attached parts Projection area Quantity Back shell screw (M2.5) 2 Ferrule 1 Innter ferrule 1 Back shell latch 2 Spring 1 Aligner* 1 * Aligner is not attached for FCN-260C008-E/L0 Unit: mm n PART NUMBERS Part Number Pair FCN-260C008-A/L0 FCN-260C008-C/L0 8 FCN-260C008-E/L0 FCN-260C024-A/L0 FCN-260C024-C/L0 24 FCN-260C024-E/L0 Specifications subject to change Cable Dimensions (mm) A B C D E F 24AWG 24.9 17.7 8.7 14.4 7.2 10.45 26AWG 24.9 17.7 8.7 14.4 7.2 9.23 28AWG 24.9 17.7 8.7 14.4 7.2 9.23 24AWG 48.9 41.7 8.7 21.0 10.5 15.65 26AWG 48.9 41.7 8.7 17.5 10.5 14.3 28AWG 48.9 41.7 8.3 16.4 8.2 13.3 http://us.fujitsu.com/connectors 19 microGiGaCNTM FCN- 260 (D) Series 4X LOOPBACK MODULE - 8 PAIRS FCN-261Z008 (ROHS 5/6) - discontinued, replaced by: FCN-261Z008L (ROHS 6/6) nDIMENSIONS 49 (1.929) (24.9)[0.980] 22.9 (0.902) Pin Number 7.2 (0.283) 8.7(0.346) 14.4 (0.567) 17.7 (0.697) 10.3(0.406) 7.2 (0.283) From To S1 S16 S2 S15 S3 S14 S4 S13 S5 S12 ScrewM2.5 S2 S16 S6 S11 S7 S10 S8 S9 n PART NUMBER S1 Unit: mm (in.) S15 12X LOOPBACK MODULE - 24 PAIRS FCN-261Z024 (ROHS 5/6)- discontinued, replaced by: FCN-261Z024L (ROHS 6/6) nDIMENSIONS 49 (1.929) (48.9) [1.925] 7.2 (0.283) 20.9 (0.823) 9.61 (0.039) 8.3 (0.327) 10.3 (0.406) 21 (0.827) 41.7 (1.642) S2 Part Number Pair FCN-261Z008L 8 Pin Number S12 S37 From To S13 S36 S1 S48 S14 S35 S2 S47 S15 S34 S3 S46 S16 S33 S4 S45 S17 S32 S5 S44 S18 S31 S6 S43 S19 S30 S7 S42 S20 S29 S8 S41 S21 S28 S9 S40 S22 S27 S10 S39 S23 S26 S11 S38 S24 S25 S48 n PART NUMBER S1 S47 Specifications subject to change Unit: mm (in.) Part Number Pair FCN-261Z024L 24 http://us.fujitsu.com/connectors 20 microGiGaCNTM FCN- 260 (D) Series 4X LOOPBACK MODULE - 8 PAIRS WITH THUMBSCREWS FCN-261Z008-SL nDIMENSIONS Screw M2.5 S16 S2 (29.8) S15 S1 20.15 14.4 10.3 8.7 9.65 49 10.5 Unit: mm n PART NUMBER Part Number Pair FCN-261Z008-SL 8 Pin Number From To S1 S16 S2 S15 S3 S14 S4 S13 S5 S12 S6 S11 S7 S10 S8 S9 Specifications subject to change http://us.fujitsu.com/connectors 21 microGiGaCNTM FCN- 260 (D) Series 4X / 12X BACKSHELL KIT, THUMBSCREWS nDIMENSIONS 7.7 Min. (Key slot) K1(Key) K2(Key) 3.75 (Key) 0.75 (Key) 1.7 Min. (Key slot width) C4 10.3 O C5 2-M2.5 2.25 (Key) K3(Key) K4(Key) 6.75 C3 9.65 C2 C1 Quantity Attached parts Thumb screw 49 10.5 Back shell screw (M2.5) Ferrule 2 1 Inner ferrule 1 Thumbscrew 2 Spring 1 Aligner Plug key 1 4 Unit: mm n PART NUMBERS Part Number FCN-260C008-A/S3 FCN-260C008-C/S3 FCN-260C024-A/S3 FCN-260C024-C/S3 Pair 8 24 Specifications subject to change Cable Dimmensions (mm) C1 C2 C3 C4 C5 K1 K2 K3 K4 24AWG 29.8 20.15 17.25 14.4 10.45 9.75 6.75 5.25 8.25 26AWG 29.8 20.15 17.25 14.4 9.23 9.75 6.75 5.25 8.25 24AWG 53.8 44.15 41.25 21.0 15.65 33.75 30.75 29.25 32.25 26AWG 53.8 44.15 41.25 17.5 14.3 33.75 30.75 29.25 32.25 http://us.fujitsu.com/connectors 22 microGiGaCNTM FCN- 260 (D) Series n ASSEMBLY TOOLS Ferrule Crimp Dies FCN-237T-T109/H Hand Press Ferrule Crimp Dies Part Number Applicable Backshell Applicable Cable OD Notes FCN-261T-T002/H FCN-260C008-A/L0 9.530.4 Normally 8 pair, 24AWG FCN-260C008-A/S3 0.3750.015 FCN-260C008-C/L0 8.380.4 FCN-260C008-C/S3 0.3300.015 FCN-261T-T101/H FCN260C024-E/L0 11.050.4 0.4350.015 Normally 24 pair, 28AWG FCN-261T-T105/H FCN-260C024-A/L0 15.490.4 Normally 24 pair, 24AWG FCN-260C024-A/S3 0.6100.015 FCN-261T-T103/H Normally 8 pair, 26AWG or 28AWG Both the press and ferrule crimp tool are required for the ferrule crimp process. Note that additional tooling will be added to cover smaller wire bundle O.D.s. Please check with factory. Specifications subject to change http://us.fujitsu.com/connectors 23 microGiGaCNTM FCN- 260 (D) Series n INSTRUCTIONS FOR CABLE ASSEMBLY 1. Set the crimping dies onto the hand press After a set is completed 2. A ferrule and a spring are put on the cable. a. Strip the cable insulator and put the spring, which shall be moved at the position where it does not interfere with assembly process. Spring c. A ferrule is put on the position of 2mm from the end of the jacket d. Strip the shield pair of wires (27mm [1.063in.] from the ring edge) and then wire insulation (27.5mm [1.082 in.]). 27 27 .5m mm Specifications subject to change m( (1. 1.0 06 3) b. The shield braid is turnd back and cut the length of 13mm (0.512 in.) 13mm (0.512 in.) 2mm (0.079 in.) e. A shield of pair wires passed through the aligner, and solder the wires onto the paddle card. 82 ) http://us.fujitsu.com/connectors 24 microGiGaCNTM FCN- 260 (D) Series 3. Ferrule crimping: To explain the process clearly, the following photos do not have a paddle card. a. Set the cable onto right side of the jig, and end of the jig, ferrule edges are made to become parallel, and surface of provisional crimp and the connector made to parallel, pre-crimp the ferrule until part A, D hit parts B, E. (The ferrule becomes an eclipse). parallel X(mm)[in.] Cable Pa ir Connector AW G X (mm) [in.] 8 24 10.5 [0.413 ] 24 24 15.60 [0.614 ] b. Confirm that lever is tightened hardly. If it isn't, a lever shall be pulled to the front and tightened. c. Set the cable at the table cavity at the left side. (The ferrule edge/end face shall be parallel to the jig). If a ring is not able to be inserted into the hollow, loosen with the lever, and insert the ferrule again. Then tighten with the lever. d. Crimp ferrule until parts A, D hit parts B, E. Specifications subject to change e. Hand press is returned to the original position, and loosened with the lever pulling forward. f. Crimp completion. http://us.fujitsu.com/connectors 25 microGiGaCNTM FCN- 260 (D) Series Y (m Check Y dimension: m ] in )[ C able Y (m m ) [in.] P air AW G 8 24 10.8 [0.425] 24 24 16.00 [0.630] 4. Turn back the jacket and cut in the ferrule edge. cut in the ferrule edge 5. Installation of cover: g. Set the cable and soldered with the paddle card into the outer cover. (#1 pin position side of the connector shall be on top) and put another cover, and set the spring, which is initially put on the cable, at the edge of the ferrule and install it inside and then fix the covers with the screws. Specifications subject to change http://us.fujitsu.com/connectors 26 microGiGaCNTM FCN- 260 (D) Series Fujitsu Components International Headquarter Offices Contact Japan FUJITSU COMPONENT LIMITED Shinagawa Seaside Park Tower 12-4, Higashi-shinagawa 4-chome, Tokyo 140 0002, Japan Tel: (81-3) 3450-1681 Fax: (81-3) 3474-2385 Email: fcl-contact@cs.jp.fujitsu.com Web: www.fujitsu.com/jp/group/fcl/en/ Europe FUJITSU COMPONENTS EUROPE B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ China FUJITSU ELECTRONIC COMPONENTS (SHANGHAI) CO., LTD. Unit 4306, InterContinental Center 100 Yu Tong Road, Shanghai 200070, China Tel: (86 21) 3253 0998 /Fax: (86 21) 3253 0997 Email: fcsh@cn.fujitsu.com www.fujitsu.com/cn/products/devices/components/ North and South America FUJITSU COMPONENTS AMERICA, INC. 2290 North First Street, Suite 212 San Jose, CA 95131 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components/ Asia Pacific FUJITSU COMPONENTS ASIA, LTD. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex, Singapore 118529 Tel: (65) 6375-8560 / Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fujitsu.com/sg/products/devices/components/ Hong Kong FUJITSU COMPONENTS HONG KONG CO., LTD. Room 06, 28/F, Greenfield Tower, Concordia Plaza, No.1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong Kong Tel: (852) 2881 8495 Fax: (852) 2894 9512 Email: fcal@fcal.fujitsu.com www.fujitsu.com/sg/products/devices/components/ Korea FUJITSU COMPONENTS KOREA, LTD. Alpha Tower #403, 645 Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 13524 Korea Tel: (82 31) 708-7108 Fax: (82 31) 709-7108 Email: fcal@fcal.fujitsu.com www.fujitsu.com/sg/products/devices/components/ Copyright Alltrademarksorregisteredtrademarksarethepropertyoftheirrespectiveowners.FujitsuComponentsAmericaoritsaffiliatesdonotwarrantthat thecontentofdatasheetiserrorfree.InacontinuingefforttoimproveourproductsFujitsuComponentsAmerica,Inc.oritsaffiliatesreservethe righttochangespecifications/datasheetswithoutpriornotice. Copyright(c)2020FujitsuComponentsAmerica,Inc.Allrightsreserved.RevisedAugust18,2020. Specifications subject to change http://us.fujitsu.com/connectors 27