RoHS Multilayer Bead Arrays Dimensions: MLBA20 Inches (mm) Allied Part Number Impedance () Tolerance (%) Test Freq. MHz, 200mV DCR Max. () Rated Current (mA)Max MLBA20-300T-RC 30 30 100 .012 350 MLBA20-600T-RC 60 30 100 .012 250 MLBA20-800T-RC 80 30 100 .012 150 MLBA20-121T-RC 120 30 100 .012 150 MLBA20-151T-RC 150 30 100 .012 150 MLBA20-181T-RC 180 30 100 0.12 150 Features * Surface mount EMI components * Four lines in one chip for suppressing noise * Low profile * High denisty circuit design Electrical Inductance Range: 30ohm ~ 1000ohm Tolerance: 30% over entire range, tighter tolerances available. Operating Temp: -55C ~ +125C Rated Current: Based on temp rise not to exceed 30C. Resistance to Soldering Heat MLBA20-221T-RC 220 30 100 0.12 150 MLBA20-241T-RC 240 30 100 0.12 150 MLBA20-301T-RC 300 30 100 0.12 150 Pre-Heat 150C, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260C +/- 5C for 10 sec 1 sec. Test Equipment MLBA20-471T-RC 470 30 100 0.12 100 MLBA20-601T-RC 600 30 100 0.15 100 MLBA20-102T-RC 1000 30 100 0.15 50 (Z): HP4291A RF IMPEDANCE/MATERIAL ANALYZER (RDC): CHEN HWA 502BC Physical All specifications subject to change without notice. 714-665-1140 Packaging: 3000 pieces per 7 inch reel. Marking: None ALLIED COMPONENTS INTERNATIONAL REVISED15 05/09/12 www.alliedcomponents.com