Part Number 855731 426 MHz SAW Filter Preliminary Data Sheet Features * * * * * * * * For broadband wireless access and VOFDM applications Usable bandwidth 5.16 MHz High attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 13.30 x 6.50 x 1.75 mm Bottom View 1 1.75 NOM. 1.96 MAX. 0.76 2 3 4 12 5 11 6 10 13.3 9 8 7 2.54 2.18 6.50 2.54 1.17 x 3.76 0.79 1.50 Pin No. 11 5 1,2,3,4,6 7,8,9,10,12 Description Input Output Case ground Case ground Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev A 29-Sep-2005 Page 1 of 5 Part Number 855731 426 MHz SAW Filter Preliminary Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) 0 to +70 oC Parameter (3) Center Frequency Insertion Loss at 426 MHz Upper 0.5 dB Point (4) Lower 0.5 dB Point (4) Upper 3 dB Point (4) Lower 3 dB Point (4) Upper 40 dB Point (4) Lower 40 dB Point (4) Upper 45 dB Point (4) Lower 45 dB Point (4) Upper 50 dB Point (4) Lower 50 dB Point (4) Relative Attenuation 100.0 - 419.5 MHz 433.5 - 500.0 MHz Phase Ripple 423.3 - 428.7 MHz Input VSWR at 426MHz Output VSWR at 426MHz Triple Transit Suppression Passband Ripple(5) Source Impedance: (6) Load Impedance: (6) Minimum Typical Maximum Unit 428.52 422.35 421.31 421.20 419.50 426 18.02 428.81 423.16 429.25 422.69 430.53 421.59 430.70 421.55 432.75 421.51 20.5 423.36 429.65 430.74 430.89 433.50 - MHz dB MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz 50 50 60.1 53.2 - dB dB 40 - 3.1 3.2 1.9 43 0.21 50 50 10 5.0:1 2.5:1 0.7 - deg p-p dB dB Notes: 1. 2. 3. 4. 5. 6. All specifications are based on the test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances Relative to insertion loss at 426MHz 100% of the 1 dB bandwidth (Maximum peak to adjacent valley) This is the optimum impedance in order to achieve the performance shown Test Circuit: 15nH 12nH 11 50 Single-ended 50 Subject to change or obsolescence without notice 10pF 5 1,2,3,4,6 7,8,9,10,12 15pF Rev A 50 29-Sep-2005 Page 2 of 5 Preliminary Data Sheet Part Number 855731 426 MHz SAW Filter Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev A 29-Sep-2005 Page 3 of 5 Part Number 855731 426 MHz SAW Filter Preliminary Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 15nH 12nH 11 50 Single-ended 50 10pF 5 15pF 1,2,3,4,6 7,8,9,10,12 Marking 50 PCB Footprint 13.51 1.70 3.53 SAWTEK 855731 XXXXXX 6.70 .99 .99 1.55 1.70 8.61 ID Dot Date Code The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel ID dot 24.8 2.7 O330 0.3 4.0 2.0 O1.5 A 1.75 11.5 13.9 O102 24 Direction of travel O20.2 O13.0 2.0 2.3 Section A-A 7.1 12.0 O1.5 A Dimensions shown are nominal in millimeters Packaging quantity: 2000 units/reel Subject to change or obsolescence without notice Rev A 29-Sep-2005 Page 4 of 5 Part Number 855731 426 MHz SAW Filter Preliminary Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range RF Power Symbol Minimum Maximum Unit T Tstg Pin 0 -40 - +70 +85 +10 C C dBm o o Important Notes Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance * This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability * Compatible with JEDEC J-STD-020C Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile RoHS information S-Parameters Other Technical Information Sawtek's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any Sawtek component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Or contact one of our worldwide Network of sales offices, representatives or distributors Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Rev A 29-Sep-2005 Page 5 of 5